Geology topics

Kenzie J. Turner

Publications and source records attributed to Kenzie J. Turner.

At least 19 recordsLinked to original sources

USGS2025

Two million years of climate-driven cave-sediment aggradation and valley incision in the southern Ozark Plateau from Fitton Cave, northern Arkansas, USA

Landscape evolution in karst terrains affects both subterranean and surface settings. For better understanding of controlling processes and connections between the two, multiple geochronometers were used to date sediments and speleothems in upper-level passages of Fitton Cave adjacent to the Buffalo River, northern Arkansas, within the southern Ozark Plateau. Burial cosmogenic-nuclide dating of coarse sediments indicates that gravel pulses washed into upper passages at 2.2 Ma and 1.25 Ma. These represent the oldest epigenetic cave deposits documented in this region. Associated sands and clay-rich sediments mostly have reversed magnetic polarity and thermally transferred optically stimulated luminescence dates of 1.2 to 1.0 Ma. Abandonment of these upper passages began before 0.72 Ma, when coarse sediment was deposited in a passage incised below older sediment. Maximum U-series dates of 0.7–0.4 Ma for flowstones capping clastic deposits mark the stabilization of older sediments and a change to vadose conditions that allowed post–0.4 Ma stalagmite growth. Resulting valley incision rates since 0.85 Ma are estimated at 27 m/Ma. Coarse cave-sediment pulses correlate to Laurentide glacial tills about 300 km to the north, suggesting climate influence on periglacial sediment production. Dated cave sediments also may correlate with undated older strath terraces preserved at similar heights above the Buffalo River.

Arkansas↗

USGS2025

Seamless Geologic Map Database for the Intermountain West, United States: A foundational dataset for mineral systems analysis

The Intermountain West has a complex geologic history, resulting in the formation of a diverse array of mineral deposits. Effective mineral exploration requires understanding the spatial and temporal relationships among geologic processes and events, a key focus of the mineral systems approach to exploration. This paper presents the Intermountain West Seamless Geologic Map Database, a unified dataset designed to support mineral exploration. Integrating geologic provinces, structural settings, and hydrothermal alteration, the database leverages the Seamless Integrated Geologic Mapping (SIGMa) extension to the USGS Geologic Map Schema (GeMS) to standardize geologic data from varied sources. SIGMa's hierarchical stratigraphic organization and feature-level metadata enhance data interoperability and reusability, enabling seamless query, analysis, and visualization of lithology, structural features, mineral deposits, geochronology, hydrothermal alteration. volcanic activity, and By providing a regionally consistent and dynamically evolving geologic map, this database provides a foundational framework for mineral exploration and geologic research. It also allows for an efficient workflow that expedites the publication of integrated geologic map databases.

Conference Paper↗

USGS2024

Mantle melting in regions of thick continental lithosphere: Examples from Late Cretaceous and younger volcanic rocks, Southern Rocky Mountains, Colorado (USA)

Major- and trace-element data together with Nd and Sr isotopic compositions and 40 Ar/ 39 Ar age determinations were obtained for Late Cretaceous and younger volcanic rocks from north-central Colorado, USA, in the Southern Rocky Mountains to assess the sources of mantle-derived melts in a region underlain by thick (≥150 km) continental lithosphere. Trachybasalt to trachyandesite lava flows and volcanic cobbles of the Upper Cretaceous Windy Gap Volcanic Member of the Middle Park Formation have low εNd(t) values from −3.4 to −13, 87 Sr/ 86 Sr(t) from ~0.705 to ~0.707, high large ion lithophile element/high field strength element ratios, and low Ta/Th (≤0.2) values. These characteristics are consistent with the production of mafic melts during the Late Cretaceous to early Cenozoic Laramide orogeny through flux melting of asthenosphere above shallowly subducting and dehydrating oceanic lithosphere of the Farallon plate, followed by the interaction of these melts with preexisting, low εNd(t), continental lithospheric mantle during ascent. This scenario requires that asthenospheric melting occurred beneath continental lithosphere as thick as 200 km, in accordance with mantle xenoliths entrained in localized Devonian-age kimberlites. Such depths are consistent with the abundances of heavy rare earth elements (Yb, Sc) in the Laramide volcanic rocks, which require parental melts derived from garnet-bearing mantle source rocks. New 40 Ar/ 39 Ar ages from the Rabbit Ears and Elkhead Mountains volcanic fields confirm that mafic magmatism was reestablished in this region ca. 28 Ma after a hiatus of over 30 m.y. and that the locus of volcanism migrated to the west through time. These rocks have εNd(t) and 87 Sr/ 86 Sr(t) values equivalent to their older counterparts (−3.5 to −13 and 0.7038–0.7060, respectively), but they have higher average chondrite-normalized La/Yb values (~22 vs. ~10), and, for the Rabbit Ears volcanic field, higher and more variable Ta/Th values (0.29–0.43). The latter are general characteristics of all other post– 40 Ma volcanic rocks in north-central Colorado for which literature data are available. Transitions from low to intermediate Ta/Th mafic volcanism occurred diachronously across southwest North America and are interpreted to have been a consequence of melting of continental lithospheric mantle previously metasomatized by aqueous fluids derived from the underthrusted Farallon plate. Melting occurred as remnants of the Farallon plate were removed and the continental lithospheric mantle was conductively heated by upwelling asthenosphere. A similar model can be applied to post–40 Ma magmatism in north-central Colorado, with periodic, east to west, removal of stranded remnants of the Farallon plate from the base of the continental lithospheric mantle accounting for the production, and western migration, of volcanism. The estimated depth of the lithosphere-asthenosphere boundary in north-central Colorado (~150 km) indicates that the lithosphere remains too thick to allow widespread melting of upwelling asthenosphere even after lithospheric thinning in the Cenozoic. The preservation of thick continental lithospheric mantle may account for the absence of oceanic-island basalt–like basaltic volcanism (high Ta/Th values of ~1 and εNd[t] > 0), in contrast to areas of southwest North America that experienced larger-magnitude extension and lithosphere thinning, where oceanic-island basalt–like late Cenozoic basalts are common.

Geosphere↗

USGS2023

Geologic map and hydrogeologic investigations of the upper Santa Cruz River basin, southern Arizona

This report includes an updated geologic map and cross sections of the upper Santa Cruz River basin, southern Arizona. The map and cross sections describe the geometry, thickness, and structure of the Miocene to Holocene units which form the main aquifers in the basin. The report also includes results of new hydrogeologic studies including (1) mapping and defining depth to bedrock based on geophysical data in the map area to better define the geometry and structure of the basin aquifers, (2) describing newly recognized hydrologically significant faults in the Peck Canyon and Sopori Wash areas, and (3) evaluating groundwater sources and hydrogeology of the Potrero Creek wetlands.

Arizona↗

USGS2022

The Seamless Integrated Geologic Mapping (SIGMa) extension to the Geologic Map Schema (GeMS)

Geologic maps are the fundamental building blocks of surface and subsurface three-dimensional geologic framework models of the Earth’s crust. However, as the production and availability of geologic map databases continues to increase, inconsistent data models and the lack of synthesized, national geologic map data at scales appropriate for informed decision making negatively affect the functional integration of geologic map data with other national datasets. The Geologic Map Schema (GeMS) is the publication and archive database standard for geologic map data funded by the U.S. Geological Survey National Cooperative Geologic Mapping Program, and standardizes the organization and content of a single map database. However, synthesizing multiple databases into a seamless geologic map database creates a different set of challenges and database needs than GeMS was designed to accommodate. The Seamless Integrated Geologic Mapping (SIGMa) extension is designed to expand the capabilities of GeMS by enabling integration of map-based geoscience data. In particular, the SIGMa extension enables capturing a diverse and ever-changing set of map units, produced by many contributors operating independently, and by incremental and noncontiguous assembly and publication. Feature-level metadata fields allow data sources and digital compilation methods to be attributed separately and a relational structure is designed to support the link between data sources and features attributed with multiple data sources. Instead of paragraph-style map-unit descriptions that can be highly inconsistent, SIGMa parses fundamental map-unit attributes, including material, genetic process, and age, into thematically specific fields. The SIGMa extension uses a hierarchical map-unit organization to facilitate a dynamic and evolving, formation-level stratigraphic framework. The hierarchy is developed around geologic provinces that represent temporally restricted geologic events, processes, and settings. Geologic provinces can include magmatic events, depositional settings associated with tectonic processes or stable continental margins, and processes that are actively shaping the modern landscape. A geologic province hierarchy places map units into a geologic context at subregional to continental scales and provides the flexibility to support incremental assembly of the stratigraphy.

Scientific Investigations Report↗

USGS2022

Field-trip guide to continental arc to rift volcanism of the southern Rocky Mountains—Southern Rocky Mountain, Taos Plateau, and Jemez Mountains volcanic fields of southern Colorado and northern New Mexico

The southern Rocky Mountains of northern New Mexico and southern Colorado preserve the Oligocene to Pleistocene record of North American continental arc to rift volcanism. The 35–23 million year old (Ma) southern Rocky Mountain volcanic field (SRMVF), spectacularly preserved in the San Juan Mountains of southern Colorado, records the evolution of large andesitic stratovolcanoes to complex caldera clusters, from which at least 22 major ignimbrite sheets (each 150–5,000 cubic kilometers) were erupted. Outflow deposits of the SRMVF preserved along the broadly uplifted northwest flank of the northern Rio Grande rift basin (the San Luis Valley) provide critical structural and temporal constraints on the inception of crustal extension. Coincident with waning stages of SRMVF caldera-forming volcanism (~25.4 Ma), extensional tectonism was accompanied by a transition from bimodal early Miocene to intermediate-composition late Miocene and dominantly basaltic Pliocene rift volcanism of the Taos Plateau in the southern San Luis Basin. Concomitant rift volcanism in the Española Basin and bordering Jemez Mountains of northern New Mexico records a similar Miocene eruptive history dominated by intermediate-composition volcanism that transitioned locally to Pliocene rift-related basaltic volcanism of the Cerros del Rio volcanic field and culminated in eruptions of the iconic rhyolitic Pleistocene Bandelier Tuff and formation of the Valles Caldera along the northwestern rift-basin margin. This 6-day, 7-night field trip will focus, in broadly equal proportions, on rift-related extensional volcanism of the Jemez Mountains and Taos Plateau regions during the first half of the trip, and on caldera-forming volcanism of the southern Rocky Mountain volcanic field during the second half of the trip. The 35-million-year volcanic history of the region highlighted by new geologic mapping, high-resolution geochronology, petrologic, geochemical, and geophysical data facilitates discussion of (1) the magmatic response to the tectonic transition from subducted-slab arc to continental-rift volcanism; (2) the nature and temporal evolution of rift magmas; (3) fault controls on the spatial evolution of rift magmatism; (4) the diversity of continental-arc ignimbrite volcanism and associated lavas; (5) ignimbrite caldera structure and associated intrusions in three-dimension; (6) the role of recycled crystal mush and magmatic cumulates during growth of Cordilleran batholiths; and (7) high-precision geochronologic contributions to interpretation of relations between regional tectonic and volcanic processes. Most stops will be along roads, but there will be moderate hikes on trails of less than 1-hour duration covering 1–2 kilometers (0.6–1.2 miles) with modest elevation gain of <150 meters (<492 feet). The route will progress in reverse stratigraphic order, starting in the Jemez Mountains of New Mexico and proceed northward to San Luis Basin and San Luis Hills before turning west to the southeast and central San Juan Mountains. Our last full day takes us to the little-visited and only recently mapped, Bonanza caldera of the northeastern San Juan Mountains and on the final day, we leave the San Luis Valley to briefly explore the Tertiary subvolcanic plutons of the Collegiate Range along the west side of the Arkansas Valley rift valley, en route to Denver. The authors of all daily contributions acknowledge the helpful reviews by Amy Gilmer and Joe Colgan and thank Christine Chan and Jeremy Havens for assistance with figures, tables, and guidebook text.

Colorado, New Mexico↗

USGS2022

Late Paleozoic flexural extension and overprinting shortening in the southern Ozark dome, Arkansas, USA: Evolving fault kinematics in the foreland of the Ouachita orogen

Faults and folds on the southern flank of the Ozark dome in northern Arkansas, USA, record flexural extension in a foreland area followed by shortening in response to the late Paleozoic Ouachita orogeny. Map-scale structures and an analysis of fault-slip data collected systematically during geologic mapping demonstrate that most deformation in the area accommodated north-south extension as the southern margin of Laurentia was flexed beneath the thrust load of the Ouachita belt, probably during Middle Pennsylvanian. Extension was concentrated in northeast- and west-northwest-trending structural zones having sets of discontinuous, often en echelon normal and strike-slip faults and associated monoclinal folds. Reactivation of basement weaknesses that underlie these zones is indicated by their close match to oblique-rift models in which both the proportions of normal and strike-slip faulting and the internal extension directions vary with orientation of the zones. Subsequent propagation of north-south Ouachita shortening into the foreland formed small-offset strike-slip and sparse reverse faults that overprinted older extensional structures. Strike-slip faults were concentrated in reactivated northeast-trending structural zones. In two areas, reverse faults and local anticlines were developed in the footwalls of older normal faults, both near intersections of northeast- and west-northwest-trending structural zones. These are interpreted as areas of incipient inversion due to compressional stress concentrations at fault-block corners. Spatial overlap of areas of north-south shortening and fluid flux marked by silicification or lead-zinc mineralization indicates that regional fluid flow of brines was coeval with and may have enhanced inversion during Late Pennsylvanian to early Permian.

Arkansas, Kansas, Missouri, Oklahoma↗

USGS2022

Geologic setting and geomorphic history of La Botica and surrounding area

La Botica is located on the gently east-dipping marginal area between the high San Juan Mountains to the west and the San Luis Basin to the east in south-central Colorado. The site is positioned on a topographic bench perched about 70 to 80 m above La Jara Creek (figure 2.1), a tributary to the Rio Grande. The unique floral assemblage at La Botica has resulted in intermittent occupation over the last several thousand years. The physical environment supporting this assemblage is a result of Quaternary surface processes that have modified the underlying Tertiary bedrock. Underlying bedrock at the site consists of Oligocene to Pliocene volcanic and sedimentary deposits related to the Rio Grande rift and the San Juan volcanic locus of the Southern Rocky Mountains volcanic field. Local bedrock is mildly deformed by normal faulting and eastward tilting due to the onset of Oligocene extensional deformation and initial formation of the San Luis Basin. The geomorphic evolution and incision history of La Jara Creek are directly linked to middle to late Pleistocene evolution of the Rio Grande and to regional alpine glacial cycles over the last 500 k.y. (thousand years). Subsequent degradation of surrounding bedrock and development of mass-wasting deposits, such as landslides and talus slopes, have strongly influenced the incision history of La Jara Creek and the local environment at La Botica. In addition, local talus slopes and blockfields can host processes that actively modify the local environment, and these processes may have contributed to establishment of the floral assemblage.

Colorado↗

USGS2019

A shallow rift basin segmented in space and time: The southern San Luis Basin, Rio Grande rift, northern New Mexico, U.S.A.

Interpretation of gravity, magnetotelluric, and aeromagnetic data in conjunction with geologic constraints reveals details of basin geometry, thickness, and spatiotemporal evolution of the southern San Luis Basin, one of the major basins of the northern Rio Grande rift. Spatial variations of low-density basin-fill thickness are estimated primarily using a 3D gravity inversion method that improves on previous modeling efforts by separating the effects of the low-density basin fill from the effects of pre-rift rocks. The basin is found to be significantly narrower—and more complex in the subsurface—than indicated or implied by previous modeling efforts. The basin is also estimated to be significantly shallower than previously estimated. Five distinct subbasins are recognized within the broader southern San Luis Basin. The oldest and shallowest subbasin is the Las Mesitas graben along the northwestern basin margin, formed during the Oligocene transition from Southern Rocky Mountain volcanic field magmatism to rifting. In this subbasin, sediments are estimated to reach a maximum thickness of ~400 m within a north–south elongated structural depression. Other subbasins that likely initially developed during the Miocene are the dominant tectonic features in the southern San Luis Basin. This includes the Tres Orejas subbasin, which formed in the southwestern portion of the basin by the Embudo fault zone and a hypothesized fault zone along its western margin. This subbasin reaches a maximum thickness of ~2 km, as indicated by magnetotelluric and gravity modeling. The Sunshine Valley, Questa, and Taos subbasins occupy the eastern part of the southern San Luis Basin. The southern Sangre de Cristo fault zone is the dominant tectonic feature that controlled their development after ~20 Ma. The east-down Gorge fault zone controlled the western margins of significant parts of these eastern subbasins, although much of the Taos subbasin may be superimposed on the Tres Orejas subbasin. Maximum low-density basin-fill thicknesses are estimated to be 1.2 km for the Sunshine Valley subbasin, 800 m for the Questa subbasin, and 1.8 km for the Taos subbasin. Subbasin-forming tectonic activity along the Gorge fault zone and within the Tres Orejas subbasin ceased by the end of the development of the largely Pliocene Taos Plateau volcanic field. After that, rift-related subsidence became more narrowly centered on the eastern margin of the basin, controlled mainly by the linked Embudo and southern Sangre de Cristo fault zones.

New Mexico↗

USGS2018

Geologic map of the San Antonio Mountain area, northern New Mexico and southern Colorado

The geologic map of the San Antonio Mountain area in northern New Mexico and southern Colorado is located along the west-central part of the San Luis Valley. The San Luis Valley is the geomorphic expression of the San Luis Basin, an extensional basin associated with the northern Rio Grande rift. Deposits within the map area record volcanic, sedimentary, and tectonic processes over the last ~33 million years. Oldest exposed deposits include Oligocene volcanic rocks associated with the southeast San Juan Mountains locus of volcanism within the Southern Rocky Mountains volcanic field. Overlying deposits of the Southern Rocky Mountains volcanic field are volcaniclastic sedimentary rocks interbedded with predominantly basaltic lava flows of Oligocene to Miocene age. Basalt to rhyolite volcanic rocks of the Pliocene to Pleistocene Taos Plateau volcanic field unconformably overlie Oligocene to Miocene volcanic and sedimentary deposits. Superposed on the Tertiary deposits are Pleistocene to Holocene alluvial and colluvial deposits. North- to northwest-trending faults displace rocks within the map area. Magnitude of deformation is broadly correlative with age of the deposits inasmuch as Oligocene to Miocene rocks display a greater degree of fault displacement and east tilting than Pliocene volcanic rocks. Within the map area, faults displace Oligocene to Miocene deposits 10–30 meters with generally down-to-west offset, and the units dip eastward 3–7 degrees. Pliocene volcanic rocks exhibit shallower eastward dips inferred primarily from the slope of upper lava flow surfaces that dip eastward from 1–3 degrees and lava flows are generally displaced less than 5 meters.

Colorado, New Mexico↗

USGS2018

Geologic map of the Osage SW 7.5ʹ quadrangle, Newton, Madison, and Carroll Counties, Arkansas

This map summarizes the geology of the U.S. Geological Survey Osage SW 7.5-minute quadrangle in the Ozark Plateaus region of northern Arkansas. Physiographically, the Osage SW quadrangle is located within a transitional area between the Boston Mountains to the south, and the Springfield Plateau to the north. Geologically, the area is on the southern flank of the Ozark dome; an uplift with the oldest rocks exposed at its center in the St. Francois Mountains in Missouri. Exposed within the quadrangle is an approximately 1,460-foot-thick sequence of Ordovician, Mississippian, and Pennsylvanian carbonate and clastic sedimentary rocks that have been mildly deformed by a series of faults and folds. The southeasternmost corner of the map area falls within the Buffalo National River—a park which encompasses the Buffalo River and adjacent land that is administered by the National Park Service.

Arkansas↗

USGS2016

Geologic map of the Murray Quadrangle, Newton County, Arkansas

This map summarizes the geology of the Murray quadrangle in the Ozark Plateaus region of northern Arkansas. Geologically, the area is on the southern flank of the Ozark dome, an uplift that has the oldest rocks exposed at its center, in Missouri. Physiographically, the Murray quadrangle is within the Boston Mountains, a high plateau region underlain by Pennsylvanian sandstones and shales. Valleys of the Buffalo River and Little Buffalo River and their tributaries expose an approximately 1,600-ft-thick (488-meter-thick) sequence of Ordovician, Mississippian, and Pennsylvanian carbonate and clastic sedimentary rocks that have been mildly deformed by a series of faults and folds. The Buffalo National River, a park that encompasses the Buffalo River and adjacent land that is administered by the National Park Service is present at the northwestern edge of the quadrangle. Mapping for this study was carried out by field inspection of numerous sites and was compiled as a 1:24,000 geographic information system (GIS) database. Locations and elevation of sites were determined with the aid of a global positioning satellite receiver and a hand-held barometric altimeter that was frequently recalibrated at points of known elevation. Hill-shade relief and slope maps derived from a U.S. Geological Survey 10-meter digital elevation model as well as orthophotographs were used to help trace ledge-forming units between field traverses within the Upper Mississippian and Pennsylvanian part of the stratigraphic sequence. Strike and dip of beds were typically measured along stream drainages or at well-exposed ledges. Structure contours, constructed on the top of the Boone Formation and the base of a prominent sandstone unit within the Bloyd Formation, were drawn based on the elevations of field sites on these contacts well as other limiting information for their minimum elevations above hilltops or their maximum elevations below valley bottoms.

Arkansas↗

USGS2014

40Ar/39Ar Geochronology, Isotope Geochemistry (Sr, Nd, Pb), and petrology of alkaline lavas near Yampa, Colorado: migration of alkaline volcanism and evolution of the northern Rio Grande rift

Volcanic rocks near Yampa, Colorado (USA), represent one of several small late Miocene to Quaternary alkaline volcanic fields along the northeast margin of the Colorado Plateau. Basanite, trachybasalt, and basalt collected from six sites within the Yampa volcanic field were investigated to assess correlations with late Cenozoic extension and Rio Grande rifting. In this paper we report major and trace element rock and mineral compositions and Ar, Sr, Nd, and Pb isotope data for these volcanic rocks. High-precision 40Ar/39Ar geochronology indicates westward migration of volcanism within the Yampa volcanic field between 6 and 4.5 Ma, and the Sr, Nd, and Pb isotope values are consistent with a primary source in the Proterozoic subcontinental lithospheric mantle. Relict olivine phenocrysts have Mg- and Ni-rich cores, whereas unmelted clinopyroxene cores are Na and Si enriched with finely banded Ca-, Mg-, Al-, and Ti-enriched rims, thus tracing their crystallization history from a lithospheric mantle source region to one in contact with melt prior to eruption. A regional synthesis of Neogene and younger volcanism within the Rio Grande rift corridor, from northern New Mexico to southern Wyoming, supports a systematic overall southwest migration of alkaline volcanism. We interpret this Neogene to Quaternary migration of volcanism toward the northeast margin of the Colorado Plateau to record passage of melt through subvertical zones within the lithosphere weakened by late Cenozoic extension. If the locus of Quaternary alkaline magmatism defines the current location of the Rio Grande rift, it includes the Leucite Hills, Wyoming. We suggest that alkaline volcanism in the incipient northern Rio Grande rift, north of Leadville, Colorado, represents melting of the subcontinental lithospheric mantle in response to transient infiltration of asthenospheric mantle into deep, subvertical zones of dilational crustal weakness developed during late Cenozoic extension that have been migrating toward, and subparallel to, the northeast margin of the Colorado Plateau since the middle Miocene. Quaternary volcanism within this northern Rio Grande rift corridor is evidence that the rift is continuing to evolve.

Colorado↗

USGS2014

Geologic map of the Sunshine 7.5' quadrangle, Taos County, New Mexico

The Sunshine 7.5' quadrangle is located in the south-central part of the San Luis Basin of northern New Mexico, in the Rio Grande del Norte National Monument, and contains deposits that record volcanic, tectonic, and associated alluvial and colluvial processes over the past four million years. Sunshine Valley, named for the small locale of Sunshine, is incised by a series of northeast-trending drainages cut into Tertiary and Quaternary alluvial deposits forming an extensive alluvial apron between the east flank of the Sangre de Cristo Mountains and the Rio Grande. These deposits predominantly overlie gently eastward-dipping lava flows of Pliocene Servilleta Basalt erupted from centers west of the map area. Servilleta Basalt lava flows terminate to the south against the elevated topography of three volcanic centers of the Taos Plateau volcanic field. From west to east these are Cerro de la Olla, Cerro Chiflo, and Guadalupe Mountain that are exposed in the southern part of the map area. Remnants of Miocene volcanic rocks are exposed near the southwestern edge of the map area and record evidence of an eroded volcanic terrain underlying deposits of the Taos Plateau volcanic field. These deposits are likely fault bounded to the east, roughly coincident with north to northwest trending, down-to-east faults in the southwestern quarter of the map area. The down-to-east normal faults reflect the basinward migration of the western margin of the Sunshine Valley sub-basin of the southern San Luis Basin. Pliocene and younger basin deposition was accommodated along predominantly north-trending fault-bounded grabens and is preserved as poorly exposed fault scarps that cut lava flows of Ute Mountain volcano, north of the map area. The Servilleta Basalt and younger surficial deposits record largely down-to-east basinward displacement. Faults are identified with varying confidence levels in the map area. Recognizing and mapping faults developed near the surface in relatively young, brittle volcanic rocks is difficult because: (1) they tend to form fractured zones tens of meters wide rather than discrete fault planes, (2) the relative youth of the deposits has resulted in only modest displacements on most faults, and (3) some of the faults may have significant strike-slip components that do not result in large vertical offsets that are readily apparent in offset of sub-horizontal contacts. Those faults characterized as “certain” either have distinct offset of map units or had slip planes that were directly observed in the field. Lineaments defined from magnetic anomalies form an additional constraint on potential fault locations.

New Mexico↗

USGS2014

Geologic map of the Ute Mountain 7.5' quadrangle, Taos County, New Mexico, and Conejos and Costilla Counties, Colorado

The Ute Mountain 7.5' quadrangle is located in the south-central part of the San Luis Basin of northern New Mexico, in the Rio Grande del Norte National Monument, and contains deposits that record volcanic, tectonic, and associated alluvial and colluvial processes over the past four million years. Ute Mountain has the distinction of being one of the largest intermediate composition eruptive centers of the Taos Plateau, a largely volcanic tableland occupying the southern portion of the San Luis Basin. Ute Mountain rises to an elevation in excess of 3,000 m, nearly 700 m above the basaltic plateau at its base, and is characterized by three distinct phases of Pliocene eruptive activity recorded in the stratigraphy exposed on the flanks of the mountain and in the Rio Grande gorge. Unconformably overlain by largely flat-lying lava flows of Servilleta Basalt, the area surrounding Ute Mountain records a westward thickening of basin-fill volcanic deposits interstratified in the subsurface with Pliocene basin-fill sedimentary deposits derived from older Tertiary and Precambrian sources to the east. Superimposed on this volcanic stratigraphy are alluvial and colluvial deposits derived from the flanks of Ute Mountain and more distally-derived alluvium from the uplifted Sangre de Cristo Mountains to the east, that record a complex temporal and stratigraphic succession of Quaternary basin deposition and erosion. Pliocene and younger basin deposition was accommodated along predominantly north-trending fault-bounded grabens. These poorly exposed fault scarps cutting lava flows of Ute Mountain volcano. The Servilleta Basalt and younger surficial deposits record largely down-to-east basinward displacement. Faults are identified with varying confidence levels in the map area. Recognizing and mapping faults developed near the surface in young, brittle volcanic rocks is difficult because: (1) they tend to form fractured zones tens of meters wide rather than discrete fault planes, (2) the relative youth of the deposits has resulted in only modest displacements on most faults, and (3) some of the faults may have significant strike-slip components that do not result in large vertical offsets that are readily apparent in offset of sub-horizontal contacts. Those faults characterized as “certain” either have distinct offset of map units or had slip planes that were directly observed in the field. Lineaments defined from magnetic anomalies form an additional constraint on potential fault locations and are indicated as such on the map sheet.

Colorado, New Mexico↗

USGS2014

Geologic map of the west-central Buffalo National River region, northern Arkansas

This map summarizes the geology of the west-central Buffalo National River region in the Ozark Plateaus region of northern Arkansas. Geologically, the region lies on the southern flank of the Ozark dome, an uplift that exposes oldest rocks at its center in Missouri. Physiographically, the map area spans the Springfield Plateau, a topographic surface generally held up by Mississippian cherty limestone and the higher Boston Mountains to the south, held up by Pennsylvanian rocks. The Buffalo River flows eastward through the map area, enhancing bedrock erosion of an approximately 1,600-ft- (490-m-) thick sequence of Ordovician, Mississippian, and Pennsylvanian carbonate and clastic sedimentary rocks that have been mildly deformed by a series of faults and folds. Quaternary surficial units are present as alluvial deposits along major streams, including a series of terrace deposits from the Buffalo River, as well as colluvium and landslide deposits mantling bedrock on hillslopes. This report provides a geologic map database of the map area that improves understanding of the regional geologic framework and its influence on the regional groundwater flow system. Furthermore, additional edits were made to the Ponca and Jasper quadrangles in the following ways: new control points on important contacts were obtained using modern GPS; recent higher resolution elevation data allowed further control on placement of contacts; some new contacts were added, in particular the contact separating the upper and lower Everton Formation.

Arkansas↗

USGS2011

Geologic map of Big Bend National Park, Texas

The purpose of this map is to provide the National Park Service and the public with an updated digital geologic map of Big Bend National Park (BBNP). The geologic map report of Maxwell and others (1967) provides a fully comprehensive account of the important volcanic, structural, geomorphological, and paleontological features that define BBNP. However, the map is on a geographically distorted planimetric base and lacks topography, which has caused difficulty in conducting GIS-based data analyses and georeferencing the many geologic features investigated and depicted on the map. In addition, the map is outdated, excluding significant data from numerous studies that have been carried out since its publication more than 40 years ago. This report includes a modern digital geologic map that can be utilized with standard GIS applications to aid BBNP researchers in geologic data analysis, natural resource and ecosystem management, monitoring, assessment, inventory activities, and educational and recreational uses. The digital map incorporates new data, many revisions, and greater detail than the original map. Although some geologic issues remain unresolved for BBNP, the updated map serves as a foundation for addressing those issues. Funding for the Big Bend National Park geologic map was provided by the United States Geological Survey (USGS) National Cooperative Geologic Mapping Program and the National Park Service. The Big Bend mapping project was administered by staff in the USGS Geology and Environmental Change Science Center, Denver, Colo. Members of the USGS Mineral and Environmental Resources Science Center completed investigations in parallel with the geologic mapping project. Results of these investigations addressed some significant current issues in BBNP and the U.S.-Mexico border region, including contaminants and human health, ecosystems, and water resources. Funding for the high-resolution aeromagnetic survey in BBNP, and associated data analyses and interpretation, was from the USGS Crustal Geophysics and Geochemistry Science Center. Mapping contributed from university professors and students was mostly funded by independent sources, including academic institutions, private industry, and other agencies.

Texas↗

USGS2011

Geophysical expression of elements of the Rio Grande rift in the northeast Tusas Mountains - Preliminary interpretations

New interpretations of the nature of the Rio Grande rift and pre-existing rocks in the northeast Tusas Mountains region are derived from new and existing gravity and aeromagnetic data. 12-15 mGal amplitude gravity lows are interpreted to mainly reflect large thicknesses of the upper Oligocene to upper Miocene, syn-rift Los Pinos Formation and possibly significant amounts of the Eocene El Rito Formation. The Broke Off Mountain sub basin, named after the location of its greatest inferred depth, is interpreted to be a ~40 km long and ~13 km wide structure elongated in a northwest trend at the western margin of the San Luis Basin. The sub basin is interpreted to contain a maximum combined thickness of 900-2300 m of the Los Pinos Formation and El Rito Formation, with the Los Pinos Formation constituting the majority of the section. Sub basin age is constrained to be older than 21.6 ± 1.4 Ma, the age of a Hinsdale Formation basalt flow that caps the Los Pinos Formation section at Broke Off Mountain. This age constraint and surface geology indicate a pre- and early-rift age. The structural fabric of the northeast Tusas Mountains region is dominated by northwest-trending normal faults, as indicated by geologic mapping and interpretation of aeromagnetic data. Preliminary analysis of the aeromagnetic data suggests that lineaments, possibly reflecting faulting, trend through volcanic rocks as young as Pliocene in age. If correct, these interpretations challenge commonly held beliefs regarding two stages in the structural style of rifting, where early (Oligocene-Miocene) rifting was characterized by broad, shallow basins bounded by northwest-trending faults and later (Miocene-Pliocene) rifting was characterized by deep, narrow basins bounded by north-trending faults. The Broke Off Mountain sub basin is a counter example of a pre- and early-rift, deep and narrow basin. We hypothesize that the Broke Off Mountain sub basin may represent a southward extension of the Monte Vista graben in Colorado, based on similarities in geophysical expression, stratigraphy, and its position at the western portion of the San Luis Basin

Colorado, New Mexico↗