Search USGS⌕ Search

Geology topics

Kenneth L. Pierce

Publications and source records attributed to Kenneth L. Pierce.

At least 19 recordsLinked to original sources
USGS2022

The dynamic floor of Yellowstone Lake, Wyoming, USA: The last 14 k.y. of hydrothermal explosions, venting, doming, and faulting

Hydrothermal explosions are significant potential hazards in Yellowstone National Park, Wyoming, USA. The northern Yellowstone Lake area hosts the three largest hydrothermal explosion craters known on Earth empowered by the highest heat flow values in Yellowstone and active seismicity and deformation. Geological and geochemical studies of eighteen sublacustrine cores provide the first detailed synthesis of the age, sedimentary facies, and origin of multiple hydrothermal explosion deposits. New tephrochronology and radiocarbon results provide a four-dimensional view of recent geologic activity since recession at ca. 15–14.5 ka of the >1-km-thick Pinedale ice sheet. The sedimentary record in Yellowstone Lake contains multiple hydrothermal explosion deposits ranging in age from ca. 13 ka to ~1860 CE. Hydrothermal explosions require a sudden drop in pressure resulting in rapid expansion of high-temperature fluids causing fragmentation, ejection, and crater formation; explosions may be initiated by seismicity, faulting, deformation, or rapid lake-level changes. Fallout and transport of ejecta produces distinct facies of subaqueous hydrothermal explosion deposits. Yellowstone hydrothermal systems are characterized by alkaline-Cl and/or vapor-dominated fluids that, respectively, produce alteration dominated by silica-smectite-chlorite or by kaolinite. Alkaline-Cl liquids flash to steam during hydrothermal explosions, producing much more energetic events than simple vapor expansion in vapor-dominated systems. Two enormous explosion events in Yellowstone Lake were triggered quite differently: Elliott’s Crater explosion resulted from a major seismic event (8 ka) that ruptured an impervious hydrothermal dome, whereas the Mary Bay explosion (13 ka) was triggered by a sudden drop in lake level stimulated by a seismic event, tsunami, and outlet channel erosion.

Wyoming↗
USGS2018

Pleistocene glaciation of the Jackson Hole area, Wyoming

Pleistocene glaciations and late Cenozoic offset on the Teton fault have played central roles in shaping the scenic landscapes of the Teton Range and Jackson Hole area in Wyoming. The Teton Range harbored a system of mountain-valley glaciers that produced the striking geomorphic features in these mountains. However, the comparatively much larger southern sector of the Greater Yellowstone glacial system (GYGS) is responsible for creating the more expansive glacial landforms and deposits that dominate Jackson Hole. The glacial history is also inextricably associated with the Yellowstone hotspot, which caused two conditions that have fostered extensive glaciation: (1) uplift and consequent cold temperatures in greater Yellowstone; and (2) the lowland track of the hotspot (eastern Snake River Plain) that funneled moisture to the Yellowstone Plateau and the Yellowstone Crescent of High Terrain (YCHT). The penultimate (Bull Lake) glaciation filled all of Jackson Hole with glacial ice. Granitic boulders on moraines beyond the south end of Jackson Hole have cosmogenic 10Be exposure ages of ~150 thousand years ago (ka) and correlate with Marine Isotope Stage 6. A thick loess mantle subdues the topography of Bull Lake moraines and caps Bull Lake outwash terraces with a reddish buried soil near the base of the loess having a Bk horizon that extends down into the outwash gravel. The Bull Lake glaciation of Jackson Hole extended 48 kilometers (km) farther south than the Pinedale, representing the largest separation of these two glacial positions in the Western United States. The Bull Lake is also more extensive than the Pinedale on the west (22 km) and southwest (23 km) margins of the GYGS but not on the north and east. This pattern is explained by uplift and subsidence on the leading and trailing “bow-wave” of the YCHT, respectively. During the last (Pinedale) glaciation, mountain-valley glaciers of the Teton Range extended to the western edge of Jackson Hole and built bouldery moraines that commonly enclose lakes. On the southern margin of the GYGS, prominent glacial outwash terraces define three phases of the Pinedale glaciation in Jackson Hole: Pinedale-1 (Pd-1) by Antelope Flats with subdued channel patterns on the east side of Jackson Hole; Pinedale-2 (Pd-2) by a large outwash fan that includes Baseline Flat on the west side of Jackson Hole with well-defined channel patterns; and Pinedale-3 (Pd-3) by The Potholes and other outwash fans farther up the Snake River in central Jackson Hole. During Pinedale glaciation, three glacial lobes of the GYGS fed into Jackson Hole, and the relative importance of these lobes changed dramatically through time. During the Pd-1 glaciation, the eastern Buffalo Fork lobe dominated whereas in Pd-2 and Pd-3 time the northern Snake River lobe dominated. This is consistent with migration of the GYGS center of ice mass westward and southward as glaciers built up towards the moisture source provided by storms moving northeastward up the eastern Snake River Plain. The recession of the eastern Buffalo Fork lobe in Pd-2 and Pd-3 times is consistent with an enlarged ice mass on the Yellowstone Plateau that placed the eastern part of the GYGS in a precipitation or snow shadow. In Pd-1 time, the Buffalo Fork lobe reached its maximum extent and was joined by the Pacific Creek lobe. This culmination may correlate with the ~21–18 ka ages of moraines in the Teton Range and nearby ranges. Three subdivisions of Pd-1 glaciation built moraines that are nearly or entirely covered by outwash almost 100 meters thick. In Pd-2 time, the Snake River lobe joined with the Pacific Creek lobe and built a large outwash fan south of the present-day Jackson Lake. Boulders on a moraine at the head of this fan are dated to 15.5 ± 0.5 ka. The relation between Teton glaciers and those of the GYGS is indicated by outwash from these Pd-2 moraines that partly buries outer Jenny Lake moraines dated to 15.2 ± 0.7 ka. East of the large outwash fan, Pd-2 ice advanced across the glacial-age Triangle X-2 lake sediments, perhaps in a surge. The Buffalo Fork lobe retreated more than 20 km up valley from its Pd-1 position and Pd-2 ice of the Snake River and Pacific Creek lobes advanced into the area previously occupied by the Buffalo Fork lobe. The Pd-3 position flanks the margin of Jackson Lake and represents a retreat to a stable position after the Pd-2 7-km advance that may have been a surge across the Triangle X-2 lake sediments. The Potholes and South Landing outwash fans were built in the area deglaciated by the retreat from Pd-2 to Pd-3 time. The Spalding Bay outwash fan continued to incise and a meltwater stream flowed just outside the Teton glacier that filled the present Jenny Lake and deposited the 14.4 ± 0.8 ka inner Jenny Lake moraines. Glacial outwash terraces increase in slope toward their respective moraines of the GYGS and are complex in both north-south and east-west directions. The Pd-1 terrace slopes to the west where it is buried by the Pd-2 outwash. The post-depositional tilting of the Pd-1 outwash terrace is an order of magnitude smaller than the original westward depositional slope. The Pd-1, 2, and 3 terraces have a shingle-like geometry such that the highest terrace decreases in age down valley, and in southern Jackson Hole, the Pd-3 terrace is only 3–5 m above the Snake River. In Pd-1 time the combined Buffalo Fork and Pacific Creek lobes scoured out four basins: (1) Emma Matilda Lake; (2) Two Ocean Lake; (3) a deep basin from lower Pacific Creek to beneath the Oxbows and Jackson Lake Dam; and (4) the largest basin from the lower Buffalo Fork to Deadmans Bar of the Snake River. These basins are largely filled with fine-grained sediment and are now marked by moist lowlands or lakes. In Pd-2 and Pd-3 time the Snake River lobe scoured the present 120-m deep Jackson Lake and possibly the 120-m deeper sediment-filled basin. Subglacial erosion of the Jackson Lake basin by confined water jets is supported by eskers that climb up to the head of the South Landing outwash fan.

Wyoming↗
USGS2018

History and dynamics of the Greater Yellowstone Glacial System during the last two glaciations

The Greater Yellowstone Glacial System (GYGS) covered about 20,000 km2 at its maximum Pleistocene extent. The initiation, culmination, and ultimate decay of the GYGS involved complex interactions between several coalescent ice masses flowing from glacial source areas adjoining and including the Yellowstone Plateau. Here, we present an updated review of the history and dynamics of the GYGS during the penultimate (Bull Lake) and last (Pinedale) glaciations, drawing upon an integration of glacial-geologic mapping with >130 cosmogenic 10Be and 3He exposure ages. Bull Lake glacial deposits in greater Yellowstone are dated to ca. 150–140 ka and correlate with marine isotope stage 6. The Bull Lake glaciation extended well beyond the Pinedale along the southern and western GYGS margins, but Pinedale glaciers overrode Bull Lake ice limits on the north and east sides. The northeastward shift of the center of ice mass from Bull Lake to Pinedale time may be explained by uplift on the leading edge of the Yellowstone hotspot and subsidence on the trailing margin. In early Pinedale time (∼22–18 ka), ice buildup culminated in the high terrain of the Beartooth Uplift and High Absaroka Range. Glaciers from these source regions flowed onto the northeastern margin of the Yellowstone Plateau and advanced to terminal moraines beyond Clarks Fork Canyon and in Jackson Hole. By middle Pinedale time (∼18–16 ka), the Yellowstone Plateau ice cap surface had risen above the equilibrium-line altitude, stimulating orographic glacial buildup nourished by storms funneled eastward through the Snake River Plain. The plateau ice cap eventually thickened to >1000 m and joined glaciers from the Beartooth Uplift and Gallatin Range to form the northern Yellowstone outlet glacier. Terrain east and downwind of the ice cap crest was placed in a precipitation shadow, resulting in glacial recession in these regions. During the late Pinedale (∼16–13 ka), the plateau ice cap prograded southwestward toward the direction of moisture supply, leading to advances along the southern and western margins of the GYGS. Northern sectors of the plateau ice cap were nearly stagnant at this time. The Yellowstone region experienced widespread deglaciation ca. 15–14 ka in response to warming climate. Unloading of the ∼1 km-thick plateau ice cap and consequent release of pressure on the magmatic system beneath Yellowstone was not accompanied by volcanism, indicating that the magma chamber was not primed to erupt via decompression during the last deglaciation.

Idaho, Montana Wyoming↗
USGS2017

Glacial sequence near McCall, Idaho: Weathering rinds, soil development, morphology, and other relative-age criteria

The sequence of glacial deposits near McCall, Idaho, previously assigned to the Pinedale and Bull Lake glaciations, contains deposits of four different ages. These ages are defined by multiple relative-age criteria, including weathering rinds, soil development, surface-rock weathering, morainal morphology, and loess stratigraphy. The thickness of weathering rinds on basaltic clasts is statistically representative and reproducible and can be used to estimate numerical ages. Following in order of decreasing relation to age are soil development, surface-rock weathering, and moraine morphology. The glacial deposits near McCall appear to correspond to times of high worldwide ice volume indicated by the marine oxygen-isotope record. Pilgrim Cove and McCall deposits, both assigned to the Pinedale glaciation, are late Wisconsin in age, perhaps 14,000 and 20,000 years, respectively. They represent a rare case in which deposits of Pinedale age can be separated by relative-age data. Timber Ridge deposits, assigned to the Bull Lake glaciation, have subdued, but well-preserved morainal morphology; relative-age data indicate that they are pre-Wisconsin in age, probably about 140,000–150,000 years old, although we cannot exclude an older age. Williams Creek deposits are clearly distinct from, and intermediate in age between, McCall and Timber Ridge deposits. Weathering rinds and the inferred ages of the other deposits suggest an early Wisconsin age for Williams Creek deposits.

Idaho↗
USGS2017

A loess–paleosol record of climate and glacial history over the past two glacial–interglacial cycles (~ 150 ka), southern Jackson Hole, Wyoming

Loess accumulated on a Bull Lake outwash terrace of Marine Oxygen Isotope Stage 6 (MIS 6) age in southern Jackson Hole, Wyoming. The 9 m section displays eight intervals of loess deposition (Loess 1 to Loess 8, oldest), each followed by soil development. Our age-depth model is constrained by thermoluminescence, meteoric 10 Be accumulation in soils, and cosmogenic 10 Be surface exposure ages. We use particle size, geochemical, mineral-magnetic, and clay mineralogical data to interpret loess sources and pedogenesis. Deposition of MIS 6 loess was followed by a tripartite soil/thin loess complex (Soils 8, 7, and 6) apparently reflecting the large climatic oscillations of MIS 5. Soil 8 (MIS 5e) shows the strongest development. Loess 5 accumulated during a glacial interval (~ 76–69 ka; MIS 4) followed by soil development under conditions wetter and probably colder than present. Deposition of thick Loess 3 (~ 43–51 ka, MIS 3) was followed by soil development comparable with that observed in Soil 1. Loess 1 (MIS 2) accumulated during the Pinedale glaciation and was followed by development of Soil 1 under a semiarid climate. This record of alternating loess deposition and soil development is compatible with the history of Yellowstone vegetation and the glacial flour record from the Sierra Nevada.

Wyoming↗
USGS2015

Yellowstone plume trigger for Basin and Range extension, and coeval emplacement of the Nevada–Columbia Basin magmatic belt

Widespread extension began across the northern and central Basin and Range Province at 17–16 Ma, contemporaneous with magmatism along the Nevada–Columbia Basin magmatic belt, a linear zone of dikes and volcanic centers that extends for >1000 km, from southern Nevada to the Columbia Basin of eastern Washington. This belt was generated above an elongated sublithospheric melt zone associated with arrival of the Yellowstone mantle plume, with a north-south tabular shape attributed to plume ascent through a propagating fracture in the Juan de Fuca slab. Dike orientation along the magmatic belt suggests an extension direction of 245°–250°, but this trend lies oblique to the regional extension direction of 280°–300° during coeval and younger Basin and Range faulting, an ∼45° difference. Field relationships suggest that this magmatic trend was not controlled by regional stress in the upper crust, but rather by magma overpressure from below and forceful dike injection with an orientation inherited from a deeper process in the sublithospheric mantle. The southern half of the elongated zone of mantle upwelling was emplaced beneath a cratonic lithosphere with an elevated surface derived from Late Cretaceous to mid-Tertiary crustal thickening. This high Nevadaplano was primed for collapse with high gravitational potential energy under the influence of regional stress, partly derived from boundary forces due to Pacific–North American plate interaction. Plume arrival at 17–16 Ma resulted in advective thermal weakening of the lithosphere, mantle traction, delamination, and added buoyancy to the northern and central Basin and Range. It was not the sole cause of Basin and Range extension, but rather the catalyst for extension of the Nevadaplano, which was already on the verge of regional collapse.

Geosphere↗
USGS2014

Glacial and Quaternary geology of the northern Yellowstone area, Montana and Wyoming

This field guide focuses on the glacial geology and paleoecology beginning in the Paradise Valley and progressing southward into northern Yellowstone National Park. During the last (Pinedale) glaciation, the northern Yellowstone outlet glacier flowed out of Yellowstone Park and down the Yellowstone River Valley into the Paradise Valley. The field trip will traverse the following Pinedale glacial sequence: (1) deposition of the Eightmile terminal moraines and outwash 16.5 ± 1.4 10Be ka in the Paradise Valley; (2) glacial recession of ~8 km and deposition of the Chico moraines and outwash 16.1 ± 1.7 10Be ka; (3) glacial recession of 45 km to near the northern Yellowstone boundary and moraine deposition during the Deckard Flats readjustment 14.2 ± 1.2 10Be ka; and (4) glacial recession of ~37 km and deposition of the Junction Butte moraines 15.2 ± 1.3 10Be ka (this age is a little too old based on the stratigraphic sequence). Yellowstone's northern range of sagebrush-grasslands and bison, elk, wolf, and bear inhabitants is founded on glacial moraines, sub-glacial till, and outwash deposited during the last glaciation. Floods released from glacially dammed lakes and a landslide-dammed lake punctuate this record. The glacial geologic reconstruction was evaluated by calculation of basal shear stress, and yielded the following values for flow pattern in plan view: strongly converging—1.21 ± 0.12 bars (n = 15); nearly uniform—1.04 ± 0.16 bars (n = 11); and strongly diverging—0.84 ± 0.14 bars (n = 16). Reconstructed mass balance yielded accumulation and ablation each of ~3 km3/yr, with glacial movement near the equilibrium line altitude dominated by basal sliding. Pollen and charcoal records from three lakes in northern Yellowstone provide information on the postglacial vegetation and fire history. Following glacial retreat, sparsely vegetated landscapes were colonized first by spruce parkland and then by closed subalpine forests. Regional fire activity increased significantly with the development of closed subalpine forests as a result of increased fuel biomass and warmer summers. Warm dry conditions prevailed at low elevations during the early Holocene, as indicated by the presence of steppe and open mixed conifer forest. At the same time, closed subalpine forests with low fire frequency were present at higher elevations, suggesting relatively wet summer conditions. Douglas fir populations expanded throughout northern Yellowstone in the middle Holocene as a result of effectively drier conditions than before, and a decline of mesophytic plant taxa during the late Holocene imply continued drying, even though fire frequency decreased in recent millennia.

Montana;Wyoming↗
USGS2014

Surficial geologic map of the Red Rock Lakes area, southwest Montana

The Centennial Valley and Centennial Range continue to be formed by ongoing displacement on the Centennial fault. The dominant fault movement is downward, creating space in the valley for lakes and the deposition of sediment. The Centennial Valley originally drained to the northeast through a canyon now represented by a chain of lakes starting with Elk Lake. Subsequently, large landslides blocked and dammed the drainage, which created Lake Centennial, in the Centennial Valley. Sediments deposited in this late Pleistocene lake underlie much of the valley floor and rest on permeable sand and gravel deposited when the valley drained to the northeast. Cold Pleistocene climates enhanced colluvial supply of gravelly sediment to mountain streams and high peak flows carried gravelly sediment into the valley. There, the lower gradient of the streams resulted in deposition of alluvial fans peripheral to Lake Centennial as the lake lowered through time to the level of the two present lakes. Pleistocene glaciers formed in the high Centennial Range, built glacial moraines, and also supplied glacial outwash to the alluvial fans. Winds from the west and south blew sand to the northeast side of the valley building up high dunes. The central part of the map area is flat, sloping to the west by only 0.6 meters in 13 kilometers (2 feet in 8 miles) to form a watery lowland. This lowland contains Upper and Lower Red Rock Lakes, many ponds, and peat lands inside the “water plane,” above which are somewhat steeper slopes. The permeable sands and gravels beneath Lake Centennial sediments provide a path for groundwater recharged from the adjacent uplands. This groundwater leaks upward through Lake Centennial sediments and sustains wetland vegetation into late summer. Upper and Lower Red Rock Lakes are formed by alluvial-fan dams. Alluvial fans converge from both the south and the north to form outlet thresholds that dam the two shallow lakes upstream. The surficial geology aids in understanding how the landscapes in and around the Red Rock Lakes Wildlife Refuge were formed and how they transmit water. This report uses metric units except for altitudes that are also given in feet because contours on the base map are in feet and the reader would have to convert from metric units to feet to understand the map relationships.

Montana↗
USGS2012

Holocene seasonal variability inferred from multiple proxy records from Crevice Lake, Yellowstone National Park, USA

A 9400-yr-old record from Crevice Lake, a semi-closed alkaline lake in northern Yellowstone National Park, was analyzed for pollen, charcoal, geochemistry, mineralogy, diatoms, and stable isotopes to develop a nuanced understanding of Holocene environmental history in a region of northern Rocky Mountains that receives both summer and winter precipitation. The limited surface area, conical bathymetry, and deep water (> 31 m) of Crevice Lake create oxygen-deficient conditions in the hypolimnion and preserve annually laminated sediment (varves) for much of the record. Pollen data indicate that the watershed supported a closed Pinus -dominated forest and low fire frequency prior to 8200 cal yr BP, followed by open parkland until 2600 cal yr BP, and open mixed-conifer forest thereafter. Fire activity shifted from infrequent stand-replacing fires initially to frequent surface fires in the middle Holocene and stand-replacing events in recent centuries. Low values of δ 18 O suggest high winter precipitation in the early Holocene, followed by steadily drier conditions after 8500 cal yr BP. Carbonate-rich sediments before 5000 cal yr BP imply warmer summer conditions than after 5000 cal yr BP. High values of molybdenum (Mo), uranium (U), and sulfur (S) indicate anoxic bottom-waters before 8000 cal yr BP, between 4400 and 3900 cal yr BP, and after 2400 cal yr BP. The diatom record indicates extensive water-column mixing in spring and early summer through much of the Holocene, but a period between 2200 and 800 cal yr BP had strong summer stratification, phosphate limitation, and oxygen-deficient bottom waters. Together, the proxy data suggest wet winters, protracted springs, and warm effectively wet summers in the early Holocene and less snowpack, cool springs, warm dry summers in the middle Holocene. In the late Holocene, the region and lake experienced extreme changes in winter, spring, and summer conditions, with particularly short springs and dry summers and winters during the Roman Warm Period (~ 2000 cal yr BP) and Medieval Climate Anomaly (1200–800 cal yr BP). Long springs and mild summers occurred during the Little Ice Age, and these conditions persist to the present. Although the proxy data indicate effectively wet summer conditions in the early Holocene and drier conditions in the middle and late Holocene, none point specifically to changes in summer precipitation as the cause. Instead, summer conditions were governed by multi-seasonal controls on effective moisture that operated over multiple time scales.

Montana↗
USGS2009

Is the track of the Yellowstone hotspot driven by a deep mantle plume? - Review of volcanism, faulting, and uplift in light of new data

Geophysical imaging of a tilted mantle plume extending at least 500 km beneath the Yellowstone caldera provides compelling support for a plume origin of the entire Yellowstone hotspot track back to its inception at 17 Ma with eruptions of flood basalts and rhyolite. The widespread volcanism, combined with a large volume of buoyant asthenosphere, supports a plume head as an initial phase. Estimates of the diameter of the plume head suggest it completely spanned the upper mantle and was fed from sources beneath the transition zone, We consider a mantle–plume depth to at least 1,000 km to best explain the large scale of features associated with the hotspot track. The Columbia River–Steens flood basalts form a northward-migrating succession consistent with the outward spreading of a plume head beneath the lithosphere. The northern part of the inferred plume head spread (pancaked) upward beneath Mesozoic oceanic crust to produce flood basalts, whereas basalt melt from the southern part intercepted and melted Paleozoic and older crust to produce rhyolite from 17 to 14 Ma. The plume head overlapped the craton margin as defined by strontium isotopes; westward motion of the North American plate has likely “scraped off” the head from the plume tail. Flood basalt chemistries are explained by delamination of the lithosphere where the plume head intersected this cratonic margin. Before reaching the lithosphere, the rising plume head apparently intercepted the east-dipping Juan de Fuca slab and was deflected ~ 250 km to the west; the plume head eventually broke through the slab, leaving an abruptly truncated slab. Westward deflection of the plume head can explain the anomalously rapid hotspot movement of 62 km/m.y. from 17 to 10 Ma, compared to the rate of ~ 25 km/m.y. from 10 to 2 Ma. A plume head-to-tail transition occurred in the 14-to-10-Ma interval in the central Snake River Plain and was characterized by frequent (every 200–300 ka for about 2 m.y. from 12.7 to 10.5 Ma) “large volume (> 7000 km 3 )”, and high temperature rhyolitic eruptions (> 1000 °C) along a ~ 200–km-wide east–west band. The broad transition area required a heat source of comparable area. Differing characteristics of the volcanic fields here may in part be due to variations in crustal composition but also may reflect development in differing parts of an evolving plume where the older fields may reflect the eruption from several volcanic centers located above very large and extensive rhyolitic magma chamber(s) over the detached plume head while the younger fields may signal the arrival of the plume tail intercepting and melting the lithosphere and generating a more focused rhyolitic magma chamber. The three youngest volcanic fields of the hotspot track started with large ignimbrite eruptions at 10.21, 6.62, and 2.05 Ma. They indicate hotspot migration N55° E at ~ 25 km/m.y. compatible in direction and velocity with the North American Plate motion. The Yellowstone Crescent of High Terrain (YCHT) flares outward ahead of the volcanic progression in a pattern similar to a bow-wave, and thus favors a sub-lithospheric driver. Estimates of YCHT-uplift rates are between 0.1 and 0.4 mm/yr. Drainage divides have migrated northeastward with the hotspot. The Continental Divide and a radial drainage pattern now centers on the hotspot. The largest geoid anomaly in the conterminous U.S. is also centered on Yellowstone and, consistent with uplift above a mantle plume. Bands of late Cenozoic faulting extend south and west from Yellowstone. These bands are subdivided into belts based both on recency of offset and range-front height. Fault history within these belts suggests the following pattern: Belt I — starting activity but little accumulated offset; Belt II — peak activity with high total offset and activity younger than 14 ka; Belt III — waning activity with large offset and activity younger than 140 ka; and Belt IV — apparently dead on substantial range fronts (south side of the eastern Snake River Plain only). These belts of fault activity have migrated northeast in tandem with the adjacent hotspot volcanism. On the southern arm of the YCHT, fault activity occurs on the inner, western slope consistent with driving by gravitational potential energy, whereas faulting has not started on the eastern, outer, more compressional slope. Range fronts increase in height and steepness northeastward along the southern-fault band. Both the belts of faulting and the YCHT are asymmetrical across the volcanic hotspot track, flaring out 1.6 times more on the south than the north side. This and the southeast tilt of the Yellowstone plume may reflect southeast flow of the upper mantle.

Wyoming↗
USGS2009

Hydrothermal processes above the Yellowstone magma chamber: Large hydrothermal systems and large hydrothermal explosions

Hydrothermal explosions are violent and dramatic events resulting in the rapid ejection of boiling water, steam, mud, and rock fragments from source craters that range from a few meters up to more than 2 km in diameter; associated breccia can be emplaced as much as 3 to 4 km from the largest craters. Hydrothermal explosions occur where shallow interconnected reservoirs of steam- and liquid-saturated fluids with temperatures at or near the boiling curve underlie thermal fields. Sudden reduction in confining pressure causes fluids to flash to steam, resulting in significant expansion, rock fragmentation, and debris ejection. In Yellowstone, hydrothermal explosions are a potentially significant hazard for visitors and facilities and can damage or even destroy thermal features. The breccia deposits and associated craters formed from hydrothermal explosions are mapped as mostly Holocene (the Mary Bay deposit is older) units throughout Yellowstone National Park (YNP) and are spatially related to within the 0.64-Ma Yellowstone caldera and along the active Norris-Mammoth tectonic corridor. In Yellowstone, at least 20 large (>100 m in diameter) hydrothermal explosion craters have been identified; the scale of the individual associated events dwarfs similar features in geothermal areas elsewhere in the world. Large hydrothermal explosions in Yellowstone have occurred over the past 16 ka averaging ~1 every 700 yr; similar events are likely in the future. Our studies of large hydrothermal explosion events indicate: (1) none are directly associated with eruptive volcanic or shallow intrusive events; (2) several historical explosions have been triggered by seismic events; (3) lithic clasts and comingled matrix material that form hydrothermal explosion deposits are extensively altered, indicating that explosions occur in areas subjected to intense hydrothermal processes; (4) many lithic clasts contained in explosion breccia deposits preserve evidence of repeated fracturing and vein-filling; and (5) areal dimensions of many large hydrothermal explosion craters in Yellowstone are similar to those of its active geyser basins and thermal areas. For Yellowstone, our knowledge of hydrothermal craters and ejecta is generally limited to after the Yellowstone Plateau emerged from beneath a late Pleistocene icecap that was roughly a kilometer thick. Large hydrothermal explosions may have occurred earlier as indicated by multiple episodes of cementation and brecciation commonly observed in hydrothermal ejecta clasts. Critical components for large, explosive hydrothermal systems include a water-saturated system at or near boiling temperatures and an interconnected system of well-developed joints and fractures along which hydrothermal fluids flow. Active deformation of the Yellowstone caldera, active faulting and moderate local seismicity, high heat flow, rapid changes in climate, and regional stresses are factors that have strong influences on the type of hydrothermal system developed. Ascending hydrothermal fluids flow along fractures that have developed in response to active caldera deformation and along edges of low-permeability rhyolitic lava flows. Alteration of the area affected, self-sealing leading to development of a caprock for the hydrothermal system, and dissolution of silica-rich rocks are additional factors that may constrain the distribution and development of hydrothermal fields. A partial low-permeability layer that acts as a cap to the hydrothermal system may produce some over-pressurization, thought to be small in most systems. Any abrupt drop in pressure initiates steam flashing and is rapidly transmitted through interconnected fractures that result in a series of multiple large-scale explosions contributing to the excavation of a larger explosion crater. Similarities between the size and dimensions of large hydrothermal explosion craters and thermal fields in Yellowstone may indicate that catastrophic events which result in large hydrothermal explosions are an end phase in geyser basin evolution. The Mary Bay hydrothermal explosion crater complex is the largest such complex in Yellowstone, and possibly in the world, with a diameter of 2.8 km in length and 2.4 km in width. It is nested in Mary Bay in the northern basin of Yellowstone Lake, an area of high heat flow and active deformation within the Yellowstone caldera. A sedimentary sequence exposed in wave-cut cliffs between Storm Point and Mary Bay gives insight into the geologic history of the Mary Bay hydrothermal explosion event. The Mary Bay explosion breccia deposits overlie sand above varved lake sediments and are separated locally into an upper and lower unit. The sand unit contains numerous small normal faults and is coextensive with the Mary Bay breccia in its northern extent. This sand may represent deposits of an earthquake-generated wave. Seismicity associated with the earthquake may have triggered the hydrothermal explosion responsible for development of the Mary Bay crater complex. Large hydrothermal explosions are rare events on a human time scale; however, the potential for additional future events of the sort in Yellowstone National Park is not insignificant. Based on the occurrence of large hydrothermal explosion events over the past 16,000 yr, an explosion large enough to create a 100-m-wide crater might be expected every 200 yr.

Wyoming↗
USGS2008

Track of the Yellowstone hotspot: Young and ongoing geologic processes from the Snake River Plain to the Yellowstone Plateau and Tetons

This field trip highlights various stages in the evolution of the Snake River Plain–Yellowstone Plateau bimodal volcanic province, and associated faulting and uplift, also known as the track of the Yellowstone hotspot. The 16 Ma Yellowstone hotspot track is one of the few places on Earth where time-transgressive processes on continental crust can be observed in the volcanic and tectonic (faulting and uplift) record at the rate and direction predicted by plate motion. Recent interest in young and possible renewed volcanism at Yellowstone along with new discoveries and synthesis of previous studies, i.e., tomographic, deformation, bathymetric, and seismic surveys, provide a framework of evidence of plate motion over a mantle plume. This 3-day trip is organized to present an overview into volcanism and tectonism in this dynamically active region. Field trip stops will include the young basaltic Craters of the Moon, exposures of 12–4 Ma rhyolites and edges of their associated collapsed calderas on the Snake River Plain, and exposures of faults which show an age progression similar to the volcanic fields. An essential stop is Yellowstone National Park, where the last major caldera-forming event occurred 640,000 years ago and now is host to the world's largest concentration of hydrothermal features (>10,000 hot springs and geysers). This trip presents a quick, intensive overview into volcanism and tectonism in this dynamically active region. Field stops are directly linked to conceptual models related to hotspot passage through this volcano-tectonic province. Features that may reflect a tilted thermal mantle plume suggested in recent tomographic studies will be examined. The drive home will pass through Grand Teton National Park, where the Teton Range is currently rising in response to the passage of the North American plate over the Yellowstone hotspot.

Idaho, Wyoming↗
USGS2007

The Yellowstone hotspot, Greater Yellowstone ecosystem, and human geography

Active geologic processes associated with the Yellowstone hotspot are fundamental in shaping the landscapes of the greater Yellowstone ecosystem (GYE), a high volcanic plateau flanked by a crescent of still higher mountainous terrain. The processes associated with the Yellowstone hotspot are volcanism, faulting, and uplift and are observed in the geology at the surface. We attribute the driving forces responsible for the northeastward progression of these processes to a thermal plume rising through the Earth’s mantle into the base of the southwest-moving North American plate. This progression began 16 million years ago (Ma) near the Nevada-Oregon border and arrived at Yellowstone about 2 Ma. Before arrival of the hotspot, an older landscape existed, particularly mountains created during the Laramide orogeny about 70–50 Ma and volcanic terrain formed by Absaroka andesitic volcanism mostly between 50–45 Ma. These landscapes were more muted than the present, hotspot-modified landscape because the Laramide-age mountains had worn down and an erosion surface of low relief had developed on the Absaroka volcanic terrain. The Yellowstone Plateau was built by hotspot volcanism of rhyolitic lavas and caldera-forming rhyolite tuffs (ignimbrites). Streams eroding back into the edges of this plateau have created scenic waterfalls and canyons such as the Grand Canyon of the Yellowstone and Lewis Canyon. Rhyolite is poor in plant nutrients and forms sandy, well-drained soils that support the monotonous, fire-adapted lodgepole pine forests of the Yellowstone Plateau. Non-rhyolitic rocks surround this plateau and sustain more varied vegetation, including spruce, fir, and whitebark pine forests broken by grassy meadows. Heat from the hotspot rises upward and drives Yellowstone’s famed geysers, hot springs, and mudpots. These thermal waters are home to specialized, primitive ecosystems, rich in algae and bacteria. The rock alteration associated with hydrothermal systems creates the bright colors of Yellowstone’s Grand Canyon. Basin-and-range-style faulting has accompanied migration of the hotspot to Yellowstone and formed the linear mountains and valleys that occur north and south of the hotspot track, which is the present-day eastern Snake River Plain. High rates of basin-and-range faulting occurred adjacent to the migrating Yellowstone hotspot, creating distinctive landscapes within the GYE such as the Teton Range/Jackson Hole, with characteristic rugged, forested ranges and adjacent flat-floored grassy valleys. The difference in altitude between the mountains and valleys provides a topographic gradient in which vegetation maturation advances with altitude; animal-migration patterns also follow this trend. The valleys provide natural meadows, agricultural land, town sites, and corridors for roads. Uplift of the GYE by as much as 1 km (3,000 ft) during the last 5 million years has resulted in ongoing erosion of deep, steep-walled valleys. Many prominent ecological characteristics of Yellowstone derive from this hotspot-induced uplift, including the moderate- to high- altitude terrain and associated cool temperatures and deep snowfall. Modern and Pleistocene climate and associated vegetation patterns strongly relate to the topography created by the hotspot and its track along the eastern Snake River Plain. Winter air masses from the moist northern Pacific Ocean traverse the topographic low of the Snake River Plain to where orographic rise onto the Yellowstone Plateau and adjacent mountains produces deep snow. A winter precipitation shadow forms on the lee (eastern) sides of the GYE. During Pleistocene glacial times, this moisture conduit provided by the hotspot-track-produced ice-age glaciers that covered the core of the present GYE. These glaciers sculpted bedrock and produced glacial moraines that are both forested and unforested, sand and gravel of ice-marginal streams and outwash gravels that are commonly covered with sagebrush-grassland, and silty lake sediments that are commonly covered by lush grassland such as Hayden Valley. The effects of the Yellowstone hotspot also profoundly shaped the human history in the GYE. Uplift associated with the hotspot elevates the GYE to form the Continental Divide, and streams drain radially outward like spokes from a hub. Inhabitants of the GYE 12,000–10,000 years ago, as well as more recent inhabitants, followed the seasonal green-up of plants and migrating animals up into the mountain areas. During European immigration, people settled around Yellowstone in the lower parts of the drainages and established roads, irrigation systems, and cultural associations. The core Yellowstone highland is too harsh for agriculture and inhospitable to people in the winter. Beyond this core, urban and rural communities exist in valleys and are separated by upland areas. The partitioning inhibits any physical connection of communities, which in turn complicates pursuit of common interests across the whole GYE. Settlements thus geographically isolated evolved as diverse, independent communities

Idaho, Montana, Utah, Wyoming↗
USGS2005

Compilation of data relating to the erosive response of 608 recently-burned basins in the western United States

This report presents a compilation of data on the erosive response, debris-flow initiation processes, basin morphology, burn severity, event-triggering rainfall, rock type, and soils for 608 basins recently burned by 53 fires located throughout the Western United States. The data presented here are a combination of those collected during our own field research and those reported in the literature. In some cases, data from a Geographic Information System (GIS) and Digital Elevation Models (DEMs) were used to supplement the data from the primary source. Due to gaps in the information available, not all parameters are characterized for all basins. This database provides a resource for researchers and land managers interested in examining relations between the runoff response of recently burned basins and their morphology, burn severity, soils and rock type, and triggering rainfall. The purpose of this compilation is to provide a single resource for future studies addressing problems associated with wildfire-related erosion. For example, data in this compilation have been used to develop a model for debris flow probability from recently burned basins using logistic multiple regression analysis (Cannon and others, 2004). This database provides a convenient starting point for other studies. For additional information on estimated post-fire runoff peak discharges and debris-flow volumes, see Gartner and others (2004).

western United States↗