Search USGS⌕ Search

Geology topics

Kathleen S. Smith

Publications and source records attributed to Kathleen S. Smith.

45 records · Page 3Linked to original sources
USGS2003

Trace-metal sources and their release from mine wastes: examples from humidity cell tests of hardrock mine waste and from Warrior Basin coal

To assess the potential impact of metal and acid contamination from mine-waste piles, it is important to identify the mineralogic source of trace metals and their mode of occurrence. Microscopic analysis of mine-waste samples from both hard-rock and coalmine waste samples demonstrate a microstructural control, as well as mineralogic control, on the source and release of trace metals into local water systems. The samples discussed herein show multiple periods of sulfide mineralization with varying concentrations of trace metals. In the first case study, two proprietary hard-rock mine-waste samples exposed to a series of humidity cell tests (which simulate intense chemical weathering conditions) generated acid and released trace metals. Some trace elements of interest were: arsenic (45-120 ppm), copper (60-320 ppm), and zinc (30-2,500 ppm). Untested and humidity cell-exposed samples were studied by X-ray diffraction, scanning electron microscope with energy dispersive X-ray (SEM/EDX), and electron microprobe analysis. Studies of one sample set revealed arsenic-bearing pyrite in early iron- and magnesium-rich carbonate-filled microveins, and iron-, copper-, arsenic-, antimony-bearing sulfides in later crosscutting silica-filled microveins. Post humidity cell tests indicated that the carbonate minerals were removed by leaching in the humidity cells, exposing pyrite to oxidative conditions. However, sulfides in the silica-filled veins were more protected. Therefore, the trace metals contained in the sulfides within the silica-filled microveins may be released to the surface and (or) ground water system more slowly over a greater time period. In the second case study, trace metal-rich pyrite-bearing coals from the Warrior Basin, Alabama were analyzed. Arsenic-bearing pyrite was observed in a late-stage pyrite phase in microfaults and microveins that crosscut earlier arsenic.

Conference Paper↗
USGS2003

Use of an intact core and stable-metal isotopes to examine leaching characteristics of a fluvial tailings deposit

The upper Arkansas River south of Leadville, Colorado, USA, contains deposits of fluvial tailings from historical mining operations in the Leadville area. These deposits are possible non-point sources of acid and metal contamination to surface- and ground-water systems. We used stable-metal isotopes to help ascertain metal retention and release mechanisms that influence metal transport from the deposits to shallow ground-water systems. To accomplish this, we excavated an intact core from a small fluvial tailings deposit and performed laboratory column experiments to examine the amount of metals leaching through the core. Deionised water was continuously applied to the top of the core, and effluent was collected from the bottom of the core for a period of about two months. Three saturation conditions were used, including unsaturated, partially saturated, and fully saturated. Reducing conditions developed upon partial and complete saturation of the core. During the unsaturated leaching phase, core effluents were acidic (pH 2.8 - 3.5) and contained elevated metal concentrations. During a portion of the unsaturated leaching phase, stable-metal isotope spikes and conservative tracers were simultaneously applied to the top of the core. The isotopes provide a means to delineate metal behaviour within the core. During the unsaturated leaching phase, the isotope spikes did not exhibit breakthrough with simultaneously added conservative tracers. However, some of the stable-metal isotope spikes did break through when reducing conditions occurred in the core (during the partial- and completesaturation conditions). In this paper, we use Cd as an example of the utility of stable-metal isotopes in geochemical studies. In the case of Cd, after the core was partially saturated, the 111 Cd spike was released as evidenced by a change in the Cd isotope ratios in the effluent. This release continued during the fully saturated leaching phase, however, the total Cd concentration did not increase. These results suggest that the 111 Cd spike was retained inside the core during the unsaturated leaching phase, and only partially released as reducing conditions developed. Results from this core-leaching experiment indicate there is a large reservoir of water-soluble material within the fluvial tailings deposit, which yields elevated metal concentrations and high acidity, and which may degrade adjacent ground- and surface-water quality. Use of stable metal isotopes in this study facilitated the determination of different metal-retention processes, metal-release processes, and metal sources in the fluvial tailings deposit in response to changing geochemical conditions.

Conference Paper↗
USGS1997

Distribution and mobility of molybdenum in the terrestrial environment

Molybdenum (Mo) is an essential element for many plants and animals (Newton and Otsuka, 1980). Because of its chemical properties, Mo readily provides sites for reactions and catalysis in biochemical systems (Haight and Boston, 1973). It is therefore important to understand the processes that control the distribution, speciation, and behavior of Mo in the surficial environment. These processes will affect the bioavalability of Mo and ultimately its passage into the food chain. In this chapter we discuss the distribution of Mo in the terrestrial environment and examine the factors that control its mobility.

Book chapter↗
USGS1995

Map showing potential metal-mine drainage hazards in Colorado, based on mineral-deposit geology

This map, compiled by the U.S. Geological Survey (USGS) in cooperation with the Colorado Geological Survey (CGS) and the U. S. Bureau of Land Management (BLM), shows potential mine-drainage hazards that may exist in Colorado metal-mining districts, as indicated by the geologic characteristics of the mineral deposits that occur in the respective districts. It was designed to demonstrate how geologic and geochemical information can be used on a regional scale to help assess the potential for mining-related and natural drainage problems in mining districts, unmined mineralized areas, and surrounding watersheds. The map also provides information on the distribution of different mineral deposit types across Colorado. A GIS (Geographic Information System) format was used to integrate geologic, geochemical, water-quality, climate, landuse, and ecological data from diverse sources. Likely mine-drainage signatures were defined for each mining district based on: (1) a review of the geologic characteristics of the mining district, including mineralogy, trace-element content, host-rock lithology, and wallrock alteration, and; (2) results of site specific studies on the geologic controls on mine-drainage composition.

Colorado↗
USGS1993

Understanding our fragile environment; Lessons from geochemical studies

An understanding of our fragile environment can begin with a recognition of the importance of certain elements, commonly called "minerals substances" (such as iron and zinc), in the lives of humans and animals and in the soils that support plants. This recognition is well deserved because these elements are essential for the life or optimum health of an organism. Some elements such as carbon, hydrogen, oxygen, magnesium, potassium, and phosphorus are required in relatively large amounts by organisms. However, others are required in smaller quantities; these are referred to as trace elements. Diseases have been related to the deficiency of about 20 elements in animals and humans and to the deficiency of approximately 13 elements in plants. At the same time, if these and other elements occur in quantities great enough, toxicity can result. An element, or any substance, that occurs in the environment and contains concentrations above what are considered to be background levels may be considered a contaminant. When contaminants occur at levels that are potentially harmful to organisms, they are labeled as hazards. Often the quantitative difference between essential amounts and toxic concentrations of these elements is very small. For example, the trace element selenium is required at a level of no less than 0.4 ppm in the diet of cattle but can be toxic at levels greater than approximately 4ppm. Elements that are required for survival by animals and plants are termed essential, while those not required are nonessential. Trace essential elements such as fluorine, copper, selenium, molybdenum, and others listed in the table on page 1 can be hazardous to life forms if present at high levels. Nonessential heavy metals such as arsenic, lead, mercury, cadmium, and chromium are usually toxic to organisms at much lower levels than trace essential elements. Depending on the association that these nonessential elements may form with natural geologic materials such as organic matter, other elements or minerals, and adsorbers (such as clays), these elements can range from being safe to being extremely toxic. The elemental composition of plants, animals, and humans correlates with the geologic makeup of the Earth, and life has evolved reflecting these natural occurrences. The science of environmental geochemistry examines the interrelationship of life with the physical and chemical Earth.

Circular↗