Geology topics

Katherine M. Scharer

Publications and source records attributed to Katherine M. Scharer.

At least 19 recordsLinked to original sources

USGS2026

Cajon Pass and the southern San Andreas Fault System: Earthquake cycle stress accumulation and present-day loading

With over a century since the last major rupture affecting the wider Los Angeles region, tectonic stress has steadily built along the southern San Andreas and San Jacinto fault systems, raising concerns of an imminent large earthquake. Cajon Pass, located at the junction of these faults, represents a critical site for potential through-going ruptures in Southern California. We constructed new 4D earthquake cycle simulations using a 1000-year paleoseismic rupture history of the San Andreas Fault System (SAFS) to assess spatial and temporal variations in stress. A semi-analytic Fourier transform model was used to compute stress from 3D dislocations in an elastic plate overlying a Maxwell viscoelastic half-space, assuming a complete coseismic reset of resolved shear stress on ruptured elements. Results show highest stress accumulation north of Cajon Pass (∼1.8 MPa/100 years) due to greater slip rates, and lower rates south of Cajon Pass (∼1.0–1.5 MPa/100 years). By 2025, Coulomb stress is estimated at 2.8 MPa on the Mojave South (MOS) segment, 1.8 MPa on the North San Bernardino (NSB1) segment and 3.6 MPa on the San Jacinto Bernardino (SJB) segment. Segments accumulate stresses with characteristic ranges of pre-event stress interpreted as failure thresholds: 1.2–2.7 MPa for MOS, 0.4–1.6 MPa for NSB1, and 1.2–2.9 MPa for SJB. When the stress disparity between segments SJB and MOS narrows, the faults appear to rupture jointly, suggesting that stress levels may control how Cajon Pass acts as an earthquake gate. These results may inform seismic hazard assessments by linking stress evolution to fault interactions.

California↗

USGS2026

3D semantic mapping of surface geological features

Semantic mapping in 3D is fundamental to a wide range of geoscientific studies and applications, including geomorphology, hazard assessment, and environmental monitoring. However, automatically segmenting geological features from large-scale photogrammetric datasets remains a significant challenge. We present a methodology to address this gap. Using overlapping images collected over environments of interest, Structure-from-Motion (SfM) produces georeferenced point clouds and estimates camera poses. Existing large vision models, such as Segment Anything Model, segment objects in the images, generating pixel-segmentation associations. To produce pixel-point associations, we project the points back onto the camera image planes. As objects are independently segmented across multiple images with different perspectives, we develop a segmentation mosaicking algorithm to build probabilistic point-segmentation associations that combines the pixel-segmentation associations and pixel-point associations. Our methodology is validated using both synthetic data generated by Kubric and real-world UAV-SfM data. The implementation is designed to be compatible with existing SfM software, including Agisoft and OpenDroneMap, for photogrammetry mapping in geoscience studies. As a case study, we apply our method to the semantic mapping of precariously balanced rocks (PBRs), which provide upper-bound constraints on historical ground motion shaking intensity. To support object-level identification of PBRs, we additionally integrated Grounding DINO, enabling text-prompted segmentation of features of interest within UAV imagery. This case study demonstrates the effectiveness of our method in generating a 3D semantic map of PBRs, enabling spatial distribution of PBR fragility for earthquake hazard analysis.

Computers & Geosciences↗

USGS2026

Stress states on the eve of past earthquakes inform earthquake rupture through fault complexity along the San Andreas and San Jacinto faults

Estimating the evolving state of stress along active fault systems can provide insight into the conditions that generated past ground‐rupturing earthquakes and influenced their ability to propagate through areas of geometric complexity, such as fault branches and stepovers. We use quasi‐static forward numerical models that incorporate the 3D complex configuration of active faults in southern California to estimate shear tractions on the geometrically complex southern San Andreas and San Jacinto faults from 1000 to 1900 C.E. These tractions include interseismic accumulation of traction due to tectonic loading, viscoelastic relaxation of shear stress within the upper crust between earthquakes, and effects of other earthquakes on the fault network. We simulate ground‐rupturing earthquakes based on the along‐strike earthquake extents modeled by Scharer and Yule (2020) , assuming that stress drop is complete in each earthquake. We use Monte Carlo simulations to estimate uncertainty in evolving shear tractions due to uncertainties in earthquake timing and in upper‐crustal viscosity. Pre‐earthquake shear tractions typically do not exceed ∼2 MPa. Although ruptures with length <200 km have pre‐earthquake shear tractions that range from near zero to ∼1.75 MPa, these tractions are not less than ∼0.4 MPa for earthquakes with rupture length >200 km. Earthquakes with long (>200 km) ruptures occur only in the single‐stranded part of the system, whereas those with short (<125 km) rupture length and high pre‐earthquake shear traction occur near fault stepovers and branches. This suggests that high accumulated shear traction encourages longer rupture propagation, but may not be sufficient to overcome geometric complexities. This modeling approach informs our understanding of rupture propagation and provides estimates of fault shear tractions that are unavailable from direct measurements.

Callifornia↗

USGS2025

Memory and jamming in fault zone sediments

Many subsurface processes involve transitions in granular material states, from arrested to creeping to flowing. Experiments and frameworks for idealized systems reveal that granular fabrics develop during shearing, co-evolve with applied stress, and govern such transitions. We use microtomography to test whether fabrics at two San Andreas fault sites reflect slip history and whether idealized frameworks extend to nature. Near-surface sediments within the fault zone transition between deformation patterns over the seismic cycle, including bulk/localized grain re-arrangements, individual grain fracturing, and localized zones of fracturing. Aseismic and co-seismic shearing produce distinct preferred grain orientations. Co-seismic fabrics can be preserved after centuries of aseismic strain, aseismic fabrics may be overprinted, and grain size and coordination number influence the fabrics. Idealized frameworks, namely anisotropic critical state theory, frictional jamming, and material memory, can explain our observations, and fault zone sediments likely undergo cycles of memory creation and erasure that influence rigidity spatiotemporally.

California↗

USGS2024

Oblique contraction along the fastest ocean-continent transform plate boundary focuses rock uplift west of the Fairweather fault, southeast Alaska

Contraction along the Yakutat–North America plate boundary drives 4.6–9.0 mm/year Holocene rock uplift rates along Earth's fastest slipping (≥49 mm/year) ocean–continent transform fault, the Fairweather Fault. Between Icy Point and Lituya Bay, the near-vertical Fairweather fault focuses rock uplift and rapid right-lateral slip by accommodating both vertical and fault-parallel strain during oblique-slip and separate, predominantly strike-slip ruptures. Unusually high uplift rates, indicated by radiocarbon and luminescence dating, result from a 10-km-wide, asymmetric, positive flower structure along a 20°, ∼30-km-long restraining double bend in the Fairweather fault. The principal reverse fault in the flower structure, the offshore, blind Icy Point–Lituya Bay fault, ruptures no more than every 460–1040 years evidenced by uplifted Holocene shorelines. Maximum 3–5 m coseismic uplifts imply 3.1–10 m dip slip per event and earthquake magnitudes of M w 7.0–7.5. The Yakutat block collides obliquely into North America, and our model entails oblique slip on the Fairweather fault with and without corupture on the reverse fault. Oblique slip is evident by vertically offset (>25 m) fluvial and marine terraces and by the primary Fairweather fault strand that strikes >20° to the west of plate-boundary motion.

Alaska↗

USGS2024

U.S. Geological Survey Earthquake Hazards Program decadal science strategy, 2024–33

Executive Summary Earthquakes represent one of our Nation’s most significant and costly natural hazards, with estimated annual loses from earthquakes close to $15 billion in 2023. Over the past two centuries, 37 U.S. States have experienced an earthquake exceeding a magnitude of 5, and 50 percent of States have a significant potential for future damaging shaking; these statistics speak to the need for nationwide interest and investment in earthquake hazard characterization and risk reduction. Authorized under the Earthquake Hazards Reduction Authorization Act, the U.S. Geological Survey (USGS) Earthquake Hazards Program (EHP) provides the scientific information, situational awareness, and knowledge necessary to reduce deaths, injuries, and economic losses from earthquakes and earthquake-induced tsunamis, landslides, and soil liquefaction. The EHP supports activities in three focused topical areas: (1) earthquake monitoring, (2) hazard assessment, and (3) applied research, using the results of each—and the coordination among them—to further support risk translation and communication in regions at risk nationwide. For earthquake monitoring, the Advanced National Seismic System (ANSS), a cooperative effort of USGS networks, university partner regional seismic networks, and real-time geodetic networks, collects and analyzes data on earthquakes; issues timely, reliable notifications of their occurrence and impacts; and provides data for earthquake research, hazard, and risk assessment as a foundation for building an earthquake-resilient Nation. The USGS-operated ShakeAlert Earthquake Early Warning system is a recent addition to EHP’s ANSS infrastructure. In the realm of earthquake hazard assessment, the EHP contributes to earthquake risk mitigation strategies by developing the National Seismic Hazard Model and maps, and other related products, that describe the likelihood and potential effects of earthquakes nationwide, especially in the urban areas of highest risk. The EHP also conducts research on the causes, characteristics, and effects of earthquakes and prioritizes work that directly increases the accuracy and precision of earthquake hazards assessments, earthquake forecasts, and earthquake monitoring and situational-awareness products and that supports the Nation’s earthquake mitigation practices. Bridging the EHP’s efforts across research, hazard assessments, and earthquake monitoring is a broad and comprehensive collection of earthquake information products, including the National Seismic Hazard Model, ShakeAlert, and other products describing impact, such as ShakeMap and PAGER (Prompt Assessment of Global Earthquakes for Response), which have been developed and integrated into EHP’s real-time monitoring systems. EHP funds external partners to carry out many important collaborative activities through an active external grants program—one of the largest in the USGS—and through cooperative agreements with other partners such as the university-operated regional seismic networks, funded as part of the ANSS. To continue its support of earthquake hazard characterization and risk reduction, the EHP aims to strengthen its foundational products and practices while positioning itself to respond to the evolving needs of the Nation and follow best practices of the scientific community. This document describes a strategy for the program to ensure it can meet these demands. The foundational priorities outlined in this strategy represent those activities that remain critical to the core functionality of the program and those that can be supported under current fiscal year 2024-level appropriations. Priorities described as aspirational are important for future growth, and to maintain the program’s position as a leading global resource in earthquake science, but would require increases in appropriated funding to be fully realized. Across the program’s portfolio of activities, several major themes have been identified as the most critical activities to advance EHP science over the coming decade. Together, these activities provide the framework necessary to integrate critical hazard characterization and risk reduction activities across the program. They provide the structure for research to advance the understanding of where, when, and why earthquakes occur and how we can use improved knowledge to drive short-term and actionable forecasts of seismic activity. They expand the usefulness of critical earthquake products and advance the sophistication of those products to keep pace with the rapidly evolving needs of an ever-expanding user base while maintaining the position of the USGS as a global leader in earthquake science. Focus on system-level science. Establish an automated earthquake-processing pipeline. Enhance the accuracy and reliability of the ShakeAlert Earthquake Early Warning system and plan for extension to other regions. Implement time-dependent earthquake forecasting. Develop physically realistic models. Expand computational capacity. This science strategy is organized into three primary sections. The first section provides an overview of the EHP and its budget, governance, and program council. Readers familiar with the program may wish to focus on the second section, which describes the core of the science strategy, including priorities across each of the EHP’s major program activities in monitoring, hazard assessment, and targeted research. The third section outlines science priorities that cut across program activities, including those involving collaborations external to the EHP.

American Samoa, Guam, Northern Marianas Islands, U↗

USGS2024

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗

USGS2024

Inbuilt age, residence time, and inherited age from radiocarbon dates of modern fires and late Holocene deposits, Western Transverse Ranges, California

Radiocarbon dates of sedimentary deposits include the elapsed time between formation of the organic material and deposition at the sample site, known as the inherited age. Long inherited ages reduce the accuracy of estimates of the timing of depositional events used to infer paleoclimate change, fire histories, and paleoearthquake timing. An inherited age distribution combines the inbuilt age distribution, which reflects the age composition of the vegetation of the source area, and the residence time distribution, which includes transport and interim storage prior to final deposition. Differentiating residence time and inbuilt age is difficult given typical dispersion of ages in a sedimentary deposit. We address this problem by comparing charcoal dates from two modern fires in southern California, the 2020 Bobcat and the 2013 Grand Fire, with a well-dated late Holocene deposit in the Pallett Creek watershed. The modern fire deposits have negligible transport time (<1 year), and 56 radiocarbon dates indicate a median age of 25 years (300-year 95% range) provides an estimate of inbuilt age for the San Gabriel Mountains. The inherited age calculated from the paleodeposits is older with a median age of ~90 years and has a positive skew (850-year 95% range). A modeled inherited age, calculated by applying the pre-bomb radiocarbon calibration curve to the modern fire age distribution, is shorter than the paleodeposit inherited age by only 21 years, indicating samples with long residence times are not common in the deposit. Comparison of inherited ages calculated from organic-rich and clastic paleodeposits indicate a slight facies dependence that may reflect longer residence time in clastic deposits. The results provide insight into the transport of charcoal through the landscape are useful for refining estimates of past environmental and tectonic events.

California↗

USGS2023

The Mojave section of the San Andreas fault (California), 1: Shaping the terrace stratigraphy of Littlerock Creek through the competition between rapid strike-slip faulting and lateral stream erosion over the last 40ka.

To determine the post-40 ka slip-rate along the Mojave section of the San Andreas Fault (MSAF) we re-analyze the sedimentary record preserved where Little Rock (LR) Creek flows across the fault. At this location, interaction between the northeast-flowing stream and right-lateral fault has resulted in the abandonment and preservation of 11 strath terraces and one paleo-floodplain in the downstream trailing corner of the river, two of which are also preserved upstream to provide cross-fault matches. A new model of fault-induced river deflection, together with standard terrace riser restoration, yields strike-slip displacements of 1,140 ± 160 m for the older terrace and 360 ± 70 m for the younger one. When combined with new 10 Be dating and reinterpretation of prior measurements the displaced terraces yield right-lateral slip-rates of 27.7 +6.9/−3.5 and 26.8 +3.4/−3.0 mm/yr over the last 23 k.y. and last 40 k.y., where uncertainties are at 95% credible intervals. These new rate determinations are consistent with independent late Holocene estimates, indicating that the long-term rate of strain accumulation along the MSAF is relatively fast and does not vary significantly when averaged over timescales of 15–20 k.y. Using our new model of stream deflection, we find that the fluvial sequence was emplaced in two distinct periods, each characterized by a temporally stable but markedly different deflected river geometry. Each period coincides with a distinct stage of erosive power along LR Creek determined from independent paleoclimate proxies. Importantly, application of the new river-deflection model allows strike-slip displacements to be determined in the absence of upstream piercing points.

California↗

USGS2023

Spatial and temporal analysis of geologic slip rates, Cucamonga Fault, California, USA: Implications for along-strike applications and multi-fault rupture

To constrain fault processes and hazard, fault slip rates may be extrapolated over different fault lengths or time intervals. Here, we investigate slip rates for the Cucamonga Fault (CF). The CF is located at the junction of the Transverse Range fault system with the San Andreas and San Jacinto Faults, and it is hypothesized to connect with these faults, promoting the propagation of large, multi-fault earthquakes. Previous work has shown that CF displacements on late Quaternary alluvial fan surfaces are highly variable along strike. We present two new 10 Be surface exposure ages from depth profiles on the alluvial fans. Slip rates are consistent with a rate of 1.4 ± 0.3 m/kyr over time intervals of ∼20, ∼30, and ∼40 kyr. If the CF participates in multi-fault ruptures, then these earthquakes occur either rarely or with sufficient regularity to maintain apparently steady rates over multiple intervals. We also explore along-strike fault displacement variability using a calibrated morphological model. The model successfully reproduces scarp profiles and indicates that fault displacement variability can be explained in part by scarp age but not uplift rate. We infer that both erosion by ephemeral gullying and distributed deformation contribute to fault displacement variability, although both are difficult to detect confidently without excavations across the scarp. These investigations show that better characterization of cumulative-slip variability along strike may improve accuracy and precision of slip rates. Slip rates that do not consider epistemic uncertainties may not be suitable for extrapolation over longer fault sections.

California↗

USGS2022

Observation-constrained multicycle dynamic models of the southern San Andreas and the northern San Jacinto Faults: Addressing complexity in paleoearthquake extent and recurrence with realistic 2D fault geometry

Understanding mechanical conditions that lead to complexity in earthquakes is important to seismic hazard analysis. In this study, we simulate physics-based multicycle dynamic models of the San Andreas fault (Carrizo through San Bernardino sections) and the San Jacinto fault (Claremont and Clark strands). We focus on a complex fault geometry based on the Southern California Earthquake Center Community Fault Model and its effect over multiple earthquake cycles. Using geodetically derived strain rates, we validate the models against geologic slip rates and recurrence intervals at various paleoseismic sites. We find that the interactions among fault geometry, dynamic rupture and interseismic stress accumulation produce stress heterogeneities, leading to rupture segmentation and variability in earthquake recurrence. Our models produce earthquakes with rupture extents similar to a recent comprehensive paleoseismic catalog. The “earthquake gates” of the Big Bend and the Cajon Pass occasionally impede dynamic ruptures. The angle of compression, which is the subtraction of the maximum shear strain rate direction from the local fault strike, can better determine the likelihood of the impedance of restraining bends to dynamic ruptures. Because the Big Bend has an angle of compression of ∼20°, ruptures that traverse the Big Bend, like the 1857 Fort Tejon earthquake, are more frequent than expected based on empirical relations which predict the ∼40° restraining bend to terminate most ruptures. Our models indicate that large ruptures tend to initiate north of the Big Bend and propagate southwards, similar to the 1857 earthquake, providing critical information for ground shaking assessment in the region.

California↗

USGS2021

STEPS: Slip time earthquake path simulations applied to the San Andreas and Toe Jam Hill Faults to redefine geologic slip rate uncertainty

Geologic slip rates are a time-averaged measurement of fault displacement calculated over hundreds to million-year time scales and are a primary input for probabilistic seismic hazard analyses, which forecast expected ground shaking in future earthquakes. Despite their utility for seismic hazard calculations, longer-term geologic slip rates represent a time-averaged measure of the tempo of strain release and do not measure variability across earthquake cycles. We have developed a numerical approach called STEPS (Slip Time Earthquake Path Simulations), which is built upon field-based observations and explicitly incorporates realistic variations in displacement per event and variability in the recurrence interval between earthquakes. The STEPS approach, which simulates strain release through time, relies on representing earthquake cycles as stairsteps, rather than straight-line paths, connecting per earthquake time-displacement coordinates. We simulate earthquake histories based on these input constraints using two examples: the Carrizo section of the San Andreas fault and the Toe Jam Hill fault of the Seattle fault zone. We find that modeled slip rate distributions agree with slip rates reported for the sites of interest by the original investigators, while providing a slip rate distribution that reflects the variability of earthquake frequency and displacement. The STEPS approach provides an estimate of fault slip rate uncertainty based on a synthetic suite of plausible time-displacement paths resulting from individual earthquakes, rather than measurement uncertainties associated with offset features. When considering this simulated earthquake behavior between measurements, the uncertainty associated with earthquake paths is greater than that calculated by the long-term rate.

California, Washington↗

USGS2021

Survey of fragile geologic features and their quasi-static earthquake ground-motion constraints, southern Oregon

Fragile geologic features (FGFs), which are extant on the landscape but vulnerable to earthquake ground shaking, may provide geological constraints on the intensity of prior shaking. These empirical constraints are particularly important in regions such as the Pacific Northwest that have not experienced a megathrust earthquake in written history. Here, we describe our field survey of FGFs in southern Oregon. We documented 58 features with fragile geometric characteristics, as determined from field measurements of size and strength, historical photographs, and light detection and ranging point clouds. Among the surveyed FGFs, sea stacks have particular advantages for use as ground‐motion constraints: (1) they are frequently tall and thin; (2) they are widely distributed parallel to the coast, proximal to the trench and the likely megathrust rupture surface; and (3) they are formed by sea cliff retreat, meaning that their ages may be coarsely estimated as a function of distance from the coast. About 40% of the surveyed sea stacks appear to have survived multiple Cascadia megathrust earthquakes. Using a quasi‐static analysis, we estimate the minimum horizontal ground accelerations that could fracture the rock pillars. We provide context for the quasi‐static results by comparing them with predictions from kinematic simulations and ground‐motion prediction equations. Among the sea stacks old enough to have survived multiple megathrust earthquakes ( n = 16), eight yield breaking accelerations lower than the predictions, although they generally overlap within uncertainty. FGFs with the lowest breaking accelerations are distributed uniformly over 130 km of coastline. Results for inland features, such as speleothems, are in close agreement with the predictions. We conclude that FGFs show promise for investigating both past earthquake shaking and its spatial variability along the coasts of Oregon and Washington, where sea stacks are often prevalent. Future work can refine our understanding of FGF age and evolution.

Oregon↗

USGS2021

Holocene depositional history inferred from single-grain luminescence ages in southern California, North America

Significant sediment flux and deposition in a sedimentary system are influenced by climate changes, tectonics, lithology, and the sedimentary system's internal dynamics. Identifying the timing of depositional periods from stratigraphic records is a first step to critically evaluate the controls of sediment flux and deposition. Here, we show that ages of single-grain K-feldspar luminescence subpopulations may provide information on the timing of previous major depositional periods. We analyzed 754 K-feldspar single-grains from 17 samples from the surface to ∼9 m-depth in a trench located downstream of the Mission Creek catchment. Single-grain luminescence subpopulation ages significantly overlap at least eight times since ∼12.0 ka indicating a common depositional history. These depositional periods correspond reasonably well with the Holocene intervals of wetter than average climate conditions based on hydroclimatic proxies from nearby locations. Our findings imply a first-order climatic control on sediment depositional history in southern California on a millennial timescale.

California↗

USGS2021

SSA task force on diversity, equity, and inclusion: Toward a changing, inclusive future in earthquake science

In the United States, a wide variety of studies show that the geoscience community does not reflect the broader societal makeup (e.g., Velasco and Jaurrieta de Velasco, 2010; Dutt, 2020; Howley, 2020). In fact, only about 10% of all Science, Technology, Engineering, and Mathematics (STEM) Ph.D. degrees are awarded to people of color, although they represent more than a third of the population (Dutt, 2020). These numbers have changed little over the past 40 yr (e.g., Bernard and Cooperdock, 2018; Dutt, 2020). Recent events in the United States have again raised awareness of this discrepancy in many fields; similar divergences may be present throughout the world. This discrepancy represents a tremendous loss of talent and contributes to ongoing bias and racism. As the premier international seismological professional society, Seismological Society of America (SSA) is committed, as stated in its ethics policy, to “freedom and transparency in research and education, which should be conducted in a supportive, inclusive, and respectful environment, free from any discrimination, harassment or bullying.” SSA convened the SSA Diversity, Equity, and Inclusion (DEI) Task Force to identify specific and actionable recommendations that the Society can take to start to address the significant issues surrounding the systematic underrepresentation in seismology and related geosciences by marginalized groups on both short- and long- term time horizons. This report, written by the Task Force, outlines actionable items that SSA can undertake as well as a framework by which progress can be measured to help guide the Society and its members forward as a community to make earthquake science more just, equitable, diverse, and inclusive. We recognize that this document cannot address the multiple individual, cultural, and historical barriers that some members may face (e.g., Núñez et al., 2020), nor can it reflect all possibilities or all recommended practices (e.g., Ali et al., 2021). What this document does represent, however, is the beginning of what we hope to be a significant cultural change in how we conduct earthquake science as an organization, not the end of this process as the Task Force fulfills its charter. As a note, some of the recommendations that the Task Force has outlined here have already been implemented within SSA or are actively being considered. For completeness, we still include them here because this highlights the commitment to change that SSA leadership has embraced.

Seismological Research Letters↗

USGS2021

Late Holocene slip rate of the Mojave section of the San Andreas Fault near Palmdale, California

The geologic slip rate on the Mojave section of the San Andreas fault is poorly constrained, despite its importance for understanding earthquake hazard, apparent discrepancies between geologic and geodetic slip rates along this fault section, and long‐term fault interactions in southern California. Here, we use surficial geologic mapping, excavations, and radiocarbon and luminescence dating to quantify the displacements and ages of late Holocene landforms offset by the fault at three sites. At the Ranch Center site, the slip rate is determined using the base of a fan marking incision and deflection of an ephemeral channel. At the adjacent Key Slide site, the margin of a landslide deposited on indigenous fire hearths provides a minimum rate. At the X‐12 site, the slip rate is determined from a channel that incised into a broad fan surface, and is deflected and beheaded by the fault. We use maximum–minimum bounds on both the displacement and age of each offset feature to calculate slip rate for each site independently. Overlap of the three independent rate ranges yields a rate of 33–39 mm/yr over the last 3 ka, under the assumption that the sites share a common history, given their proximity. Considered in sequence, site‐level epistemic uncertainties in the data permit but do not require a rate increase since ∼1200 cal B.P. Modest rate changes can be explained by aleatory variability in earthquake timing and magnitude; larger changes could suggest a shared regional variation with the Garlock and other faults. The new late Holocene slip rates are consistent with geodetic model estimates that include a viscoelastic crust and earthquake cycle effects. The geologic slip rates also provide average slip over dozens of earthquake cycles—a key constraint for long‐term earthquake rupture forecasts.

California↗

USGS2021

Prehistoric earthquakes on the Banning strand of the San Andreas fault, North Palm Springs, California

We studied a paleoseismic trench excavated in 2017 across the Banning strand of the San Andreas fault and herein provide the first detailed record of ground-breaking earthquakes on this important fault in Southern California. The trench exposed an ~40-m-wide fault zone cutting through alluvial sand, gravel, silt, and clay deposits. We evaluated the paleoseismic record using a new metric that combines event indicator quality and stratigraphic uncertainty. The most recent paleoearthquake occurred between 950 and 730 calibrated years B.P. (cal yr B.P.), potentially contemporaneous with the last rupture of the San Gorgonio Pass fault zone. We interpret five surface-rupturing earthquakes since 3.3–2.5 ka and eight earthquakes since 7.1–5.7 ka. It is possible that additional events have occurred but were not recognized, especially in the deeper (older) section of the stratigraphy, which was not fully exposed across the fault zone. We calculated an average recurrence interval of 380–640 yr based on four complete earthquake cycles between earthquakes 1 and 5. The average recurrence interval is thus slightly less than the elapsed time since the most recent event on the Banning strand. The average recurrence interval on the Banning strand is thus intermediate between longer intervals published for the San Gorgonio Pass fault zone (~1600 yr) and shorter intervals on both the Mission Creek strand of the San Andreas fault (~215 yr) and the Coachella section (~125 yr) of the San Andreas fault.

California↗

USGS2021

Geomorphic expression and slip rate of the Fairweather fault, southeast Alaska, and evidence for predecessors of the 1958 rupture

Active traces of the southern Fairweather fault were revealed by light detection and ranging (lidar) and show evidence for transpressional deformation between North America and the Yakutat block in southeast Alaska. We map the Holocene geomorphic expression of tectonic deformation along the southern 30 km of the Fairweather fault, which ruptured in the 1958 moment magnitude 7.8 earthquake. Digital maps of surficial geology, geomorphology, and active faults illustrate both strike-slip and dip-slip deformation styles within a 10°–30° double restraining bend where the southern Fairweather fault steps offshore to the Queen Charlotte fault. We measure offset landforms along the fault and calibrate legacy 14 C data to reassess the rate of Holocene strike-slip motion (≥49 mm/yr), which corroborates published estimates that place most of the plate boundary motion on the Fairweather fault. Our slip-rate estimates allow a component of oblique-reverse motion to be accommodated by contractional structures west of the Fairweather fault consistent with geodetic block models. Stratigraphic and structural relations in hand-dug excavations across two active fault strands provide an incomplete paleoseismic record including evidence for up to six surface ruptures in the past 5600 years, and at least two to four events in the past 810 years. The incomplete record suggests an earthquake recurrence interval of ≥270 years—much longer than intervals <100 years implied by published slip rates and expected earthquake displacements. Our paleoseismic observations and map of active traces of the southern Fairweather fault illustrate the complexity of transpressional deformation and seismic potential along one of Earth's fastest strike-slip plate boundaries.

Alaska↗