Search USGS⌕ Search

Geology topics

K.J. Kendrick

Publications and source records attributed to K.J. Kendrick.

8 recordsLinked to original sources
USGS2011

Soil-geomorphic significance of land surface characteristics in an arid mountain range, Mojave Desert, USA

Mountains comprise an extensive and visually prominent portion of the landscape in the Mojave Desert, California. Landform surface properties influence the role these mountains have in geomorphic processes such as dust flux and surface hydrology across the region. The primary goal of this study was to describe and quantify land surface properties of arid-mountain landforms as a step toward unraveling the role these properties have in soil-geomorphic processes. As part of a larger soil-geomorphic study, four major landform types were identified within the southern Fry Mountains in the southwestern Mojave Desert on the basis of topography and landscape position: mountaintop, mountainflank, mountainflat (intra-range low-relief surface), and mountainbase. A suite of rock, vegetation, and morphometric land surface characteristic variables was measured at each of 65 locations across the study area, which included an associated piedmont and playa. Our findings show that despite the variation within types, landforms have distinct land surface properties that likely control soil-geomorphic processes. We hypothesize that surface expression influences a feedback process at this site where water transports sediment to low lying areas on the landscape and wind carries dust and soluble salts to the mountains where they are washed between rocks, incorporated into the soil, and retained as relatively long-term storage. Recent land-based video and satellite photographs of the dust cloud emanating from the Sierra Cucapá Mountains in response to the 7.2-magnitude earthquake near Mexicali, Mexico, support the hypothesis that these landforms are massive repositories of dust.

Mojave Desert↗
USGS2008

Soil morphology of a debris flow chronosequence in a coniferous forest, southern California, USA

Soils on a series of debris flow deposits, ranging from < 1 to 244??years old, were described and sampled in order to investigate the early stages of soil development. The parent material at the site is debris flow regolith, composed mainly of gneiss, the soil moisture regime is xeric, and the vegetation is mixed coniferous forest. Ages of the deposits were assessed using dendrochronology. Morphologic trends in the organic horizons included a thickening of the humus form over time, along with the development of Fm and Hr horizons. The humus forms underwent a progression from Mormodors (20??years old), to Hemimors (26-101??years old), and finally Lignomors (163??years old) and Resimors (184-244??years old). Changes in physical properties of the uppermost mineral horizons as a function of increasing age included a decrease in the volume of coarse fragments, a linear decrease in bulk density, and a darkening and reddening of the soil color. No significant soil development took place in the subsoil during the time span of this chronosequence. The soils described were classified as Typic Xerofluvents and Typic Xerorthents (Regosols and Leptosols). Buried A horizons were observed in many of the soils. Where the A horizons could be linked to dendrochronology to assess the age of the buried surface, we found that the properties of the buried A horizons do not serve as a good indicator of the age of the surface. This study suggests rapid development of the humus form profile (organic horizons and A horizon) following debris flow deposition and rapid degradation of these horizons when the debris flow surface is buried. ?? 2008 Elsevier B.V.

Geoderma↗
USGS2008

Paleoseismic Investigations of the Walnut Site on the San Jacinto Fault

The Walnut paleoseismic site is located along the northern San Jacinto fault about 3 km southeast of the San Bernardino, California city center (Figures 1, 2). More than 340 meters of trenches were excavated across the fault zone at this site as part of an Alquist-Priolo fault study (Figure 3). We photographed and logged the SE wall and most of the NE wall of trench 1, both walls of trenches 2 and 7, the NW walls of trenches 3 and 4 and the SE wall of trench 6. After carefully cleaning the trench walls we put up a 1m by 0.5m string and nail grid. For trenches 1, 2, 6, and 7, we photographed each 1m by 0.5m panel individually and photologged on these unrectified photos. These large-scale photos were later rectified to remove the distortion due to irregularities in the trench walls and slight distortion introduced by the camera lens. Field linework was then transferred to the rectified photomosaics. We also took a set of overview photographs for each trench taken from the top of the trench towards the opposite wall. We spliced together these overview photos to make photomosaics of all of the trenches. Because the photos were taken at a downward angle, there is significant distortion. Some of this distortion has been corrected: an attempt was made to keep horizontal grid lines horizontal and there has been some horizontal scaling to align vertical lines between benches. Although the string and nail grid spacing is 1 meter by 0.5 meter, because of the distortion in the photos and subsequent adjustments, the scale is variable along the benches, from bench to bench and from trench to trench for these overview mosaics. This report serves principally as a repository for the overview photomosaics. Sheet 1 shows the overview mosaics for both walls of trenches 1 and 2 along with some linework including most of the fault traces, a prominent unconformity within the fluvial deposits and the larger bodies of liquefied sand. Sheet 2 shows the overview mosaics for the SE wall of trench 3 and the NW wall of trench 4 along with photomosaics of both walls of trench 7 and the SE wall of trench 6 that were complied from the rectified, large scale photos. No linework has been portrayed on these photomosaics. Sheet 3 shows the overview mosaics of both walls of trench 1 with the locations of detrital charcoal samples that were collected. A later version of this report will contain photomosaics for trenches 1 and 2 compiled from the individual, fully rectified photos covering each 1m by 0.5m area with detailed linework superimposed. The trenches exposed a main, Holocene-active, fault zone about 5-12 m wide which juxtaposes Late Pleistocene (?) fluvial sand and gravel southwest of the fault against organic-rich, Holocene fine sand, silt and clay apparently deposited in a marsh. Most of the faults in the main zone appear to rupture to the ground surface making it impossible to resolve individual prehistoric earthquakes along this zone. However, the main fault zone is associated with a slight upwarp and growth strata associated with this folding has recorded evidence for at least 6 late-Holocene earthquakes. Deformation due to liquefaction is further evidence of large earthquakes at these horizons. The fine-grained Holocene deposits contain abundant detrital charcoal. We have so far dated 36 samples from 20 stratigraphic layers. We used 27 of these dates in an Oxcal chronological model in order to constrain the ages of the six earthquakes. Too few samples have so far been dated from the uppermost horizons so the ages of the two youngest earthquakes recorded at the site are poorly constrained. However, it appears that the youngest sediment at the site was deposited about 2000 years ago and the thick surface soil indicate that the two youngest earthquake recorded at the site may be about this old. The radiocarbon dates provide good constraints on the ages of the four older earthquakes (Table 1). The ages of these four earthquakes suggest an aver

Open-File Report↗
USGS2004

Pedogenic silica accumulation in chronosequence soils, southern California

Chronosequential analysis of soil properties has proven to be a valuable approach for estimating ages of geomorphic surfaces where no independent age control exists. In this study we examined pedogenic silica as an indicator of relative ages of soils and geomorphic surfaces, and assessed potential sources of the silica. Pedogenic opaline silica was quantified by tiron (4,5-dihydroxy-1,3-benzene-disulfonic acid [disodium salt], C 6 H 4 Na 2 O 8 S 2 ) extraction for pedons in two different chronosequences in southern California, one in the San Timoteo Badlands and one in Cajon Pass. The soils of both of these chronosequences are developed in arkosic sediments and span 11.5 to 500 ka. The amount of pedogenic silica increases with increasing duration of pedogenesis, and the depth of the maximum silica accumulation generally coincides with the maximum expression of the argillic horizon. Pedogenic silica has accumulated in all of the soils, ranging from 1.2% tiron-extractable Si (Si tn ) in the youngest soil to 4.6% in the oldest. Primary Si decreases with increasing duration of weathering, particularly in the upper horizons, where weathering conditions are most intense. The loss of Si coincides with the loss of Na and K, implicating the weathering of feldspars as the likely source of Si loss. The quantity of Si lost in the upper horizons is adequate to account for the pedogenic silica accumulation in the subsoil. Pedogenic silica was equally effective as pedogenic Fe oxides as an indicator of relative soil age in these soils.

California↗
USGS2003

Late Pleistocene to Holocene slip rates for the Gurvan Bulag thrust fault (Gobi-Altay, Mongolia) estimated with 10Be dates

We surveyed morphotectonic markers along the central part of the Gurvan Bulag thrust, a fault that ruptured with the Bogd fault during the Gobi-Altay earthquake (1957, M 8.3), to document climatic and tectonic processes along the fault for the late Pleistocene- Holocene period. The markers were dated using 10Be produced in situ. Two major periods of alluviation ended at 131 ?? 20 and 16 ?? 4.8 ka. These appear to be contemporaneous with global climatic changes at the terminations of marine isotope stages (MIS) 6 and 2. The vertical slip rates, determined from offset measurements and surfaces ages, are 0.14 ?? 0.03 mm/yr over the late Pleistocene-Holocene and between 0.44 ?? 0.11 and 1.05 ?? 0.25 mm/yr since the end of the late Pleistocene. The higher of these slip rates for the last ???16 kyr is consistent with paleoseismic investigations along the fault [Prentice et al., 2002], and suggests that, at the end of late Pleistocene, the fault evolved from quiescence to having recurrence intervals of 4.0 ?? 1.2 kyr for surface ruptures with ???4 m vertical offset (similar to that of 1957). The inferred recurrence interval is comparable to that of the Bogd fault (3.7 ?? 1.3 kyr) suggesting that the two faults may have ruptured together also earlier during the last ???16 kyr.

Journal of Geophysical Research B: Solid Earth↗
USGS2002

Spatial and temporal deformation along the northern San Jacinto fault, southern California: Implications for slip rates

The San Timoteo badlands is an area of uplift and erosional dissection that has formed as a result of late Quaternary uplift along a restraining bend in the San Jacinto fault, of the San Andreas fault system in southern California. This bend currently is located in a region where late Quaternary deposits and associated surfaces have formed in lower San Timoteo Canyon. We have used morphometric analysis of these surfaces, in conjunction with computer modeling of deformational patterns along the San Jacinto fault, to reconstruct spatial and temporal variations in uplift along the bend. Morphometric techniques used include envelope/subenvelope mapping, a gradient-length index along channels, and denudation values. Age control is determined using a combination of thermoluminescence (TL) and near infrared optical simulation luminescence dating (IROSL) and correlation of soil-development indices. These approaches are combined with an elastic half-space model used to determine the deformation associated with the fault bend. The region of modeled uplift has a similar distribution as that determined by morphometric techniques. Luminescence dates and soil-correlation age estimates generally agree. Based on soil development, surfaces within the study area were stabilized at approximately 300-700 ka for Q3, 43-67 ka for Q2, and 27.5-67 ka for Q1. Luminescence ages (both TL and IROSL) for the formation of the younger two surfaces are 58 to 94 ka for Q2 and 37 to 62 ka for Q1 (ages reported to 1?? uncertainty). Periods of uplift were determined for the surfaces in the study area, resulting in approximate uplift rates of 0.34 to 0.84 m/ka for the past 100 ka and 0.13 to 1.00 m/ka for the past 66 ka. Comparison of these rates of uplift to those generated by the model support a higher rate of lateral slip along the San Jacinto fault than commonly assumed (greater than 20 mm/yr, as compared to 8-12 mm/yr commonly cited). This higher slip rate supports the proposal that a greater amount of slip has transferred from the San Andreas fault to the San Jacinto fault than generally held. The San Jacinto fault may have accommodated a significant portion of the plate boundary slip during the past 100 ka.

California↗
USGS2002

Primary surface rupture associated with the Mw 7.1 16 October 1999 Hector Mine earthquake, San Bernardino County, California

The Mw 7.1 Hector Mine earthquake occurred within the Mojave Desert portion of the eastern California shear zone and was accompanied by 48 km of dextral surface rupture. Complex northward rupture began on two branches of the Lavic Lake fault in the northern Bullion Mountains and also propagated southward onto the Bullion fault. Lesser amounts of rupture occurred across two right steps to the south. Surface rupture was mapped using postearthquake, 1:10,000-scale aerial photography. Field mapping provided additional detail and more than 400 fault-rupture observations; of these, approximately 300 measurements were used to characterize the slip distribution. En echelon surface rupture predominated in areas of thick alluvium, whereas in the bedrock areas, rupture was more continuous and focused within a narrower zone. Measured dextral offsets were relatively symmetrical about the epicentral region, with a maximum displacement of 5.25 ?? 0.85 m. Vertical slip was a secondary component and was variable, with minor west-side-down displacements predominat.ing in the Bullion Mountains. Field and aerial photographic evidence indicates that most of the faults that ruptured in 1999 had had prior late-Quaternary displacement, although only limited sections of the rupture show evidence for prior Holocene displacement.

Bulletin of the Seismological Society of America↗