Quality assurance of U.S. Geological Survey stream current meters; the meter-exchange program 1988-98
Explore the source record for details and available documents.
Open-File Report↗
Geology topics
K.G. Thibodeaux
Publications and source records attributed to K.G. Thibodeaux.
Review of literature on the testing of point-velocity current meters
The U.S. Geological Survey is in the process of evaluating point-velocity current meters. As part of this evaluation process, a review of the literature pertaining to the testing of point-velocity current meters was conducted. A listing of current-meter testing found in the literature was compiled and is grouped according to the type of meter tested and the type of test conducted. Meter types included in the review were vertical- and horizontal-axis mechanical current meters and electromagnetic acoustic electronic current meters. Laser current meters are not included in the review because there are no practical laser meter designs for field velocity measurements. The results of the literature review indicated that there has not been a comprehensive testing of the commonly available current meters since the 1920's.
Open-File Report↗
Instrumentation for a dry-pond detention study
A 12.3-acre, fully urbanized, residential land-use catchment was instrumented by the U. S. Geological Survey in Topeka, Kansas. Hydraulic instrumentation for flow measurement includes two types of flumes, a pipe-insert flume and a culvert-inlet (manhole) flume. Samples of rainfall and runoff for water-quality analyses were collected by automatic, 3-liter, 24-sample capacity water samples controlled by multichannel data loggers. Ancillary equipment included a raingage and wet/dry atmospheric-deposition sampler. Nineteen stormwater runoff events were monitored at the site using the instrumentation system. The system has a high reliability of data capture and permits an accurate determination of storm-water loads.
Conference Paper↗
The effects of vertical motion on the performance of current meters
A series of tests to determine the correction coefficients for Price type AA and Price type OAA current meters, when subjected to vertical motion in a towing tank, have been conducted. During these tests, the meters were subjected to vertical travel that ranged from 1.0 to 4.0 ft and vertical rates of travel that ranged from 0.33 to 1.20 ft/sec while being towed through the water at speeds ranging from 0 to 8 ft/sec. The tests show that type AA and type OAA current meters are affected adversely by the rate of vertical motion and the distance of vertical travel. In addition, the tests indicate that when current meters are moved vertically, correction coefficients must be applied to the observed meter velocities to correct for the registration errors that are induced by the vertical motion. The type OAA current meter under-registers and the type AA current meter over-registers in observed meter velocity. These coefficients for the type OAA current meter range from 0.99 to 1.49 and for the type AA current meter range from 0.33 to 1.07. When making current meter measurements from a boat or a cableway, errors in observed current meter velocity will occur when the bobbing of a boat or cableway places the current meter into vertical motion. These errors will be significant when flowing water is < 2 ft/sec and the rate of vertical motion is > 0.3 ft/sec. (Author 's abstract)
Water-Resources Investigations Report↗