Geology topics

Joshua M. Taron

Publications and source records attributed to Joshua M. Taron.

7 recordsLinked to original sources

USGS2025

Advancing current understanding of Martian impact-generated hydrothermal systems through novel coupled modeling: Insights from Gale, Jezero, and other craters

Impact-generated hydrothermal systems are considered potentially habitable environments on Mars, Earth, and other planetary bodies for microbial life. However, there is an ongoing debate regarding what geological features on Mars provide definitive evidence for such systems. Although earlier studies have modeled hydrothermal processes in Martian craters, they often lacked integration with shock physics hydrocodes to constrain initial impact conditions. The importance of this two-code coupling was demonstrated by successfully replicating alteration signatures in the Earth's Haughton impact structure. In this study, we use a similar two-code approach, combining the iSALE hydrocode with the HYDROTHERM hydrothermal model to simulate the full evolution of impact-generated hydrothermal systems. We apply this method to craters the size of Jezero (∼50 km) and Gale (∼154 km) in diameter. Although Jezero's interior is largely buried, our results align with hypothesized hydrothermal vents and alteration minerals near central uplifts in similarly sized exposed craters, such as Toro and Auki. Furthermore, our models correspond to alteration patterns observed by the Curiosity in the lower layers of Mount Sharp, which may represent remnants of impact-driven hydrothermal activity. A key finding is that these systems may persist much longer than previously estimated. Our simulations suggest that a Jezero-sized system could remain habitable for thermophiles for approximately 720,000 years, whereas a Gale-sized system could persist for nearly 2 million years. Additionally, simulations under unsaturated crustal conditions reveal that air-dominated near-surface layers can suppress vertical fluid flow, enabling deep subsurface alteration without producing detectable mineral signatures at the surface.

Journal of Geophysical Research - Planets↗

USGS2025

Evolution of permeability and strength recovery of shear fracture under hydrothermal conditions

Geothermal energy is a clean and renewable resource that depends on the ability to move water through hot rock. In many locations, the ability to move water through rock requires the presence of extensive natural or human-made systems of fractures. However, these fracture systems are influenced by a variety of complex processes that occur at the temperature and pressure conditions found in geothermal reservoirs. To make geothermal systems more efficient, it is important to understand how these fractures evolve over time in response to these processes. This study explored how fractures in rock change under high-temperature and pressure conditions, like those found in geothermal reservoirs, through laboratory experiments and numerical simulations. In general fractures, tend to close due to pressure from the surrounding rock preventing the flow of water. One set of laboratory experiments revealed that fractures in granitic rock can weaken over time at elevated temperatures. These weak fractures can then slip slowly potentially keeping the fracture open for a longer period. This study also showed that at the highest temperature examined (250 °C) large differences between the chemical composition of the rock and the fluid moving through it could improve water flow temporarily likely due to the water dissolving parts of the rock. Flow rate predicted by models shows overall good agreement with the flow rate measured in our experiments but with some long time-scale variations that may be due to mechanical wear of the fracture surface. A second set of experiments found that, over the temperature range examined, the closure of fractures was caused by brittle failure driven by high stresses at points where fracture surfaces were in contact. This result suggests that fracture closure in geothermal reservoirs could be counteracted by maintaining high pore pressures. Additionally, we also tested a new method using electrical resistance to measure fracture closure in controlled systems with high precision.

Final Technical Report↗

USGS2023

Effect of thermal and mechanical processes on hydraulic transmissivity evolution

Fracture healing is a critical component of enhanced geothermal systems, the earthquake cycle, and induced seismicity. Accordingly, there is significant interest in understanding the process of healing and its effects on fluid transport. The creation, reactivation, and sustainability of fracture networks depend on complex coupling among thermal, hydraulic, mechanical, and chemical processes. We use laboratory slide-hold-slide experiments, at temperatures from 22 to 200 ˚C, to examine effects of fracture reactivation and quasi-static loading on the evolution of fluid transport properties of simulated fractures in Westerly granite. At all temperatures, the in-plane hydraulic transmissivity consistently decays during hold periods resulting in an overall reduction in transmissivity. During the first three to fifteen hours of an experiment, transmissivity decreases rapidly due to the generation of wear products, development of a sliding surface, and compaction of the resulting gouge. Once the sliding surface has developed, the long-term transmissivity decay rate at 22 and 100 ˚C is significantly lower than the transmissivity decay rate during the initial 3 to 15 hours of the experiment. However, at 200 °C, the decay of hydraulic transmissivity remains high throughout the experiment. The long-term decay of hydraulic transmissivity can be fitted with a power law model with more rapid reduction of hydraulic transmissivity at higher temperature. Periods of sliding on the fracture surface result in transient increases in the transmissivity, due to shear dilation, as is expected for Coulomb materials. These transients are superimposed on the long-term decay. When sliding ceases and a new hold period commences, there is a rapid reduction in transmissivity and return to the long-term rate of transmissivity decay. The rate of decay of the transmissivity transients is inversely proportional to temperature, in contrast to the long-term decay and the expected behavior for processes like subcritical crack growth and indentation creep. The higher decay rates that are observed during the initial 3-15 hours of the tests and following sliding, are associated with times that the porosity of the gouge is expected to be high. The difference in decay rates suggests that when the gouge is driven far from equilibrium by active shearing, densification may be dominated by a different mechanism from long-term compaction.

Conference Paper↗

USGS2021

Evolution of fluid transmissivity and strength recovery of shear fractures under hydrothermal conditions

Geothermal systems rely on the presence of long-lived and high-volume, permeable fracture systems. The creation, reactivation, and sustainability of these systems depend on complex coupling among thermal, hydraulic, mechanical, and chemical (THMC) processes occurring in geothermal reservoirs. In part due to a paucity of experimental data, the evolution of fractures at geothermal conditions in response to THMC processes is poorly understood, particularly during the process of shear. We present preliminary results of triaxial slide-hold-slide experiments, with hold periods ranging in duration from 103 s to 106 s, to constrain rates and mechanisms of healing and sealing. Experiments were conducted on simulated fault gouge composed of Westerly granite and on bare surfaces of Westerly granite. The tests were run at temperatures of 22˚ and 200˚C with confining and average pore pressures of 30 MPa and 10 MPa, respectively. We used an axial displacement rate of 0.1 μm/s during sliding periods. Deionized water was continuously flowed along the simulated fracture so we could determine in-plane transmissivity during the tests. In gouge and bare surface experiments conducted at 200˚C, we observe significant decreases in transmissivity over the course of the experiments. For the hydrothermal gouge experiment we measured an order of magnitude net reduction in transmissivity from 1.73x10-18 to 0.17x10-18 m3, over the course of 220 hours while in the room temperature gouge experiment transmissivity only decreased by 0.35x10-18 m3 over the same amount of time. In the experiments, we observe an up to 16% recovery in transmissivity during sliding periods. At room temperature the friction data showed limited fault re-strengthening with time; healing rates are on the order of 0.1 MPa/decade. A similar healing rate was observed at 200˚C in the gouge but we observe an increase in the healing rate, to 0.75 MPa/decade, for a bare surface experiment at 200˚C. The differences in the healing rate of the gouge and bare surface experiments suggest that the generation of fine particles by grinding down of asperities on the bare surface promote quartz dissolution and reprecipitation at elevated temperatures. Further work is needed to test this possibility and provide better constraints on factors influencing the evolution of fluid transport properties and strength of shear fractures at geothermal conditions.

Conference Paper↗

USGS2021

Strength recovery and sealing under hydrothermal conditions

While there is significant evidence for healing in natural faults, geothermal reservoirs, and lab experiments, the thermal, hydraulic, mechanical, and chemical interactions that influence healing are poorly understood. We present preliminary results of triaxial slide-hold-slide experiments to constrain rates and mechanisms of healing. Experiments were conducted on gouge composed of Westerly granite and on bare surfaces of Westerly granite and Eureka quartzite. Tests were run at 22, 100, and 200˚C. In some experiments, we also determined the in-plane fluid transmissivity. In bare surface experiments we observe that restrengthening depends on both time and temperature. At 200˚C the simulated fractures restrengthen at a rate of ∆ µ /∆log(t hold ) = 0.009/decade while at 22˚C the healing rate is ~ 0.002/decade. In the gouge experiments restrengthening appears to be independent of temperature. This may be related to the heterogenous mineral composition and thickness of the gouge layer which could allow shearing to be accommodated in unhealed zones. In the experiments, an overall reduction in fluid transmissivity is observed but sliding periods are often associated with increases in the fluid transmissivity. The transmissivity reduction tends to be greater at 200˚C relative to room temperature. Our preliminary results suggest that multiple healing mechanisms are operating under hydrothermal conditions.

Conference Paper↗

USGS2018

Combining multiphase groundwater flow and slope stability models to assess stratovolcano flank collapse in the Cascade Range

Hydrothermal alteration can create low‐permeability zones, potentially resulting in elevated pore‐fluid pressures, within a volcanic edifice. Strength reduction by rock alteration and high pore‐fluid pressures have been suggested as a mechanism for edifice flank instability. Here we combine numerical models of multiphase heat transport and groundwater flow with a slope‐stability code that incorporates three‐dimensional distributions of strength and pore‐water pressure to address the following questions: (1) What permeability distributions and contrasts produce elevated pore‐fluid pressures in a stratovolcano? (2) What are the effects of these elevated pressures on flank stability? (3) Finally, what are the effects of magma intrusion on potential flank failure in an edifice? Simulation results show that under a range of plausible parameters, water tables in a stratovolcano can be elevated or perched. These elevated water tables result in universally lower stability (lower factor of safety) compared with equivalent dry edifices, indicating a higher likelihood of flank collapse. Low‐permeability (<1 × 10 −17 m 2 ) layers such as altered pyroclastic deposits or breccias can result in locally saturated regions (perched water) and lower factors of safety near the ground surface but may actually reduce liquid water saturation and pore pressures in the core of the edifice and thus may favor small, shallow collapses over larger, deeper collapses. Magma intrusion into the base of the edifice increases pore‐fluid pressures and decreases the factor of safety. However, the shear strength of edifice rocks also exerts a significant control on stability, so both mechanical properties and pore‐fluid pressures are important for stability assessments.

Washington↗

USGS2016

Dynamics of permeability evolution in stimulated geothermal reservoirs

Spatially and temporally evolving permeability fields are fundamentally associated with the operation of enhanced geothermal systems. This chapter explores the resulting magnitude and patterns of permeability alteration as well as the coupled physical processes that control the evolution of permeability during shear stimulation and long-term evolution of a geothermal reservoir. It also explores mechanisms involved in the enhancement of fracture permeability, targeting injection pressures that encourage self-propping shear stimulation alongside elastic pressure and thermal dilatation of fracture sets. Simulation of a short-term, high-injection-rate enhanced geothermal system stimulation explored the importance of hydraulic versus thermal effects and the impact of a temperature differential between fluid in the fractures and the adjoining rock matrix. The effects of variations in fracture spacing on the evolution of permeability is at least as important as the magnitude of initial permeability, and quantifying the driving mechanisms is critical to understanding reservoir response.

Book chapter↗