Geology topics

John Jamieson

Publications and source records attributed to John Jamieson.

6 recordsLinked to original sources

USGS2026

Spontaneous combustion of metal sulfide minerals and implications for seafloor massive sulfide mining

Metal sulfide minerals are abundant phases in many environments on earth, including seafloor massive sulfide (SMS) deposits, which occur at hydrothermal vents throughout the global ocean. These deep-sea settings are currently undergoing exploration for potential future mining. Here, we describe rocks from Escanaba Trough on the southern Gorda Ridge that underwent spontaneous combustion during laboratory processing. We compared the mineralogy, composition, and thermogravimetric behavior of the combusting samples to rocks from the same location that did not combust. We then used thermodynamic analyses to evaluate the exothermic nature of different metal sulfide oxidation reactions. The combusting rocks are primarily composed of nanocrystalline marcasite pseudomorphing blades of primary pyrrhotite. These altered, nanocrystalline rocks are less stable than their primary predecessors. Typically, recrystallization decreases reactivity as minerals trend towards steady state; however, both of the combusting samples we characterized are secondary, and demonstrate the instability of this metastable intermediate phase. Further, thermodynamic calculations indicate that metal sulfide oxidation is more exothermic when oxygen serves as the oxidant, as occurs in seawater or air. The distinct mineralogy, texture, and setting of SMS deposits in the modern oceans thus suggests a greater potential for self-heating in comparison to their ancient analogues.

Scientific Reports↗

USGS2026

Tectonic controls on volcanism and associated hydrothermal activity in a sediment-dominated mid-ocean ridge; Escanaba Trough

Mid-ocean ridges, the Earth's most extensive volcanic system, exhibit unique characteristics in sediment-dominant environments. Thick sediment cover insulates the crust and channels fluid along pathways that can lead to the formation of distinct crustal alteration patterns, exceptionally large mineral deposits, and specialized chemosynthetic ecosystems. This study presents an interdisciplinary investigation into the tectonics of the Escanaba Trough, a heavily sedimented axial valley at the southern Gorda Ridge in the Northeast Pacific Ocean. A primary challenge in such environments is overcoming the masking effect of thick sediments on basement structures that control magmatic and hydrothermal activity. We address this by employing three-dimensional (3D) magnetic modeling of high-resolution near-seafloor magnetic data collected by an autonomous underwater vehicle (AUV). The 2022 surveys with AUV Sentry provided data for 3D magnetic susceptibility models, refining our understanding of the geometry of sub-sediment laccoliths/saucer-shaped sills and hydrothermal alteration. In conjunction with a new 1:100,000 scale lithostratigraphic map, we outline the tectonic controls on the emplacement of Escanaba Trough's three main volcanic centers, characterize the geometry of its spreading segments, and provide volumetric data on the distribution of sub-sediment volcanism in the southern Gorda Ridge.

Escanaba Trough, Pacific Ocean↗

USGS2025

Mineralization processes at Escanaba Trough

Escanaba Trough off northern California is the southernmost and only sediment covered segment of the Gorda Ridge. Hydrothermal mineralization was first discovered in Escanaba Trough in 1985, and subsequent investigations included the delineation of the NESCA (northern Escanaba) and SESCA (southern Escanaba) sections of Escanaba Trough, as well as drilling by Ocean Drilling Program (ODP) Leg 169 in 1996. Preliminary research conducted in the 1980s distinguished two classes of sulfide mineral assemblages within the Escanaba Trough: one dominated by pyrrhotite (Fe 1-x S) and one containing ‘mixed sulfides’ including chalcopyrite (CuFeS 2 ) and sphalerite (ZnS). In 2022, we conducted a research expedition to the Escanaba Trough to more thoroughly characterize mineralization processes and consider preservation of precipitated minerals throughout hydrothermally active and inactive sections of Escanaba Trough, with the specific objective of characterizing the host minerals, and processes of enrichment for specific elements which are currently listed as critical elements and can also be toxic under certain conditions (Sb, As, Ba, Co, Ga, Ge, Te). The following will include initial results from that work.

California↗

USGS2024

Iron oxyhydroxide-rich hydrothermal deposits at the high-temperature Fåvne vent field, Mohns Ridge

The recently discovered Fåvne vent field, located at 3,040 m depth on the slow-spreading Mohns mid-ocean ridge between Greenland and Norway, is a high-temperature (≥250°C) vent field that is characterized by Fe oxyhydroxide-rich and S-poor chimneys and mounds. The vent field is located on both the hanging wall and footwall of a normal fault with a ∼1.5 km throw that forms the western edge of the ∼20 km wide ridge axial valley. Data collected during exploration of the site using a remotely operated vehicle as well as mineralogical and geochemical analyses of rock samples and sediments are used to characterize the geological setting of the vent field and composition of the hydrothermal deposits. The chimney walls are highly porous and lack defined chalcopyrite lined conduits, typical of high-temperature chimneys. Overall, abundant Fe oxyhydroxide precipitation at high-temperature vents at Fåvne reflects an excess of Fe over reduced S in the fluid, leading to precipitation of Fe oxide and oxyhydroxide minerals at high to moderate temperature vents (>100°C), and as microbially mediated and abiotic precipitation of Fe oxyhydroxide minerals at low-temperature diffuse vents (<100°C). The mounds and chimneys exhibit low base metal and reduced S concentrations relative to globally averaged seafloor deposits and suggest subseafloor mixing of hydrothermal fluid with seawater, causing metal sulfide precipitation. Cobalt enrichment at Fåvne may reflect a subsurface influence of an ultramafic substrate on circulating fluids, although ultramafic rocks are absent on the seafloor and no other elements typical of ultramafic deposits are present.

Geochemistry, Geophysics, Geosystems↗

USGS2024

Hydrothermal plume fallout, mass wasting, and volcanic eruptions contribute to sediments at Loki’s Castle vent field, Mohns Ridge

Sediments surrounding hydrothermal vents are important transition spaces between hydrothermal and pelagic environments. These sediments accumulate through diverse processes that include water column plume fallout, volcanic ash deposition, and mass wasting of hydrothermal chimneys and mounds superimposed upon background sedimentation which may originate from pelagic, terrestrial, and volcanic sources. In addition to being a sink for elements discharged from hydrothermal vents, elements may also be scavenged from seawater onto oxidized hydrothermal material. Preservation of these hydrothermal sediments may occur depending on the extent of oxidative and/or reductive dissolution processes after burial. Sediments remaining adjacent to active venting may also be hydrothermally altered after emplacement. To better understand these processes, here we evaluate sediment push cores collected from the Loki's Castle vent field at the intersection of the slow-ultraslow spreading Mohns and Knipovich mid-ocean ridges. All samples were collected within ∼225 m of current high-temperature (299–316°C) “black smoker” fluid discharge. These sediment cores are highly heterogeneous and lack stratigraphic correlation, even for samples taken within meters of each other. Most sediment cores are dominated by either pelagic sediments or mass wasted hydrothermal material, with hydrothermal plume fallout contributing a low proportion of material, and only a single volcanic ash layer occurring in one of the 13 cores. Dominant hydrothermal minerals found include talc, goethite, pyrite, pyrrhotite, and sphalerite. We find that even after several thousand years, most mass wasted hydrothermal material remains minimally altered, with sedimentation rates indistinguishable from background rates within several hundred meters of the hydrothermal vent source.

Geochemistry, Geophysics, Geosystems↗

USGS2016

News from the seabed: Geological characteristics and resource potential of deep-sea mineral resources

Marine minerals such as manganese nodules, Co-rich ferromanganese crusts, and seafloor massive sulfides are commonly seen as possible future resources that could potentially add to the global raw materials supply. At present, a proper assessment of these resources is not possible due to a severe lack of information regarding their size, distribution, and composition. It is clear, however, that manganese nodules and Co-rich ferromanganese crusts are a vast resource and mining them could have a profound impact on global metal markets, whereas the global resource potential of seafloor massive sulfides appears to be small. These deep-sea mineral commodities are formed by very different geological processes resulting in deposits with distinctly different characteristics. The geological boundary conditions also determine the size of any future mining operations and the area that will be affected by mining. Similarly, the sizes of the most favorable areas that need to be explored for a global resource assessment are also dependent on the geological environment. Size reaches 38 million km 2 for manganese nodules, while those for Co-rich crusts (1.7 million km 2 ) and massive sulfides (3.2 million km 2 ) are much smaller. Moreover, different commodities are more abundant in some jurisdictions than in others. While only 19% of the favorable area for manganese nodules lies within the Exclusive Economic Zone of coastal states or is covered by proposals for the extension of the continental shelf, 42% of the favorable areas for massive sulfides and 54% for Co-rich crusts are located in EEZs

Marine Policy↗