Geology topics

Jeffery G. Masek

Publications and source records attributed to Jeffery G. Masek.

14 recordsLinked to original sources

USGS2023

Modeling global indices for estimating non-photosynthetic vegetation cover

Non-photosynthetic vegetation (NPV) includes plant litter, senesced leaves, and crop residues. NPV plays an essential role in terrestrial ecosystem processes, and is an important indicator of drought severity, ecosystem disturbance, agricultural resilience, and wildfire danger. Current moderate spatial resolution multispectral satellite systems (e.g., Landsat and Sentinel-2) have only a single band in the 2000–2500 nm shortwave infrared “SWIR2” range where non-pigment biochemical constituents of NPV, including cellulose and lignin, have important spectral absorption features. Thus, these current systems have suboptimal capabilities for characterizing NPV cover. This research used simulated spectral mixtures accounting for variability among NPV and soils to evaluate globally-appropriate hyperspectral and multispectral indices for estimation of fractional NPV cover. The Continuum Interpolated NPV Depth Index (CINDI), a weighted ratio index measuring lignocellulose absorption near 2100 nm, was found to produce the lowest error in estimating NPV cover. CINDI was less sensitive to variability in soil spectra and green vegetation cover than competing indices. While CINDI was sensitive to the relative water content of soil and NPV, this sensitivity allowed for correcting error in estimated NPV cover as water content increased. CINDI bands were less capable than Dual Absorption NPV Index (DANI) bands for maintaining continuity with the heritage Landsat SWIR2 band, but combining multiple CINDI bands demonstrated adequate continuity. Three SWIR2 bands with band centers at 2038, 2108, and 2211 nm can provide superior capabilities for future moderate resolution multispectral/superspectral systems targeting NPV monitoring, including the next generation Landsat mission (Landsat Next). These bands and the associated CINDI index provide potential for global NPV monitoring using a constellation of future superspectral sensors and imaging spectrometers, with applications including improving soil management, preventing land degradation, evaluating impacts of drought, mapping ecosystem disturbance, and assessing wildfire danger.

Remote Sensing of Environment↗

USGS2022

Optimizing Landsat Next shortwave infrared bands for crop residue characterization

This study focused on optimizing the placement of shortwave infrared (SWIR) bands for pixel-level estimation of fractional crop residue cover ( f R ) for the upcoming Landsat Next mission. We applied an iterative wavelength shift approach to a database of crop residue field spectra collected in Beltsville, Maryland, USA (n = 916) and computed generalized two- and three-band spectral indices for all wavelength combinations between 2000 and 2350 nm, then used these indices to model field-measured f R . A subset of the full dataset with a Normalized Difference Vegetation Index (NDVI) < 0.3 threshold (n = 643) was generated to evaluate green vegetation impacts on f R estimation. For the two-band wavelength shift analyses applied to the NDVI < 0.3 dataset, a generalized normalized difference using 2226 nm and 2263 nm bands produced the top f R estimation performance ( R 2 = 0.8222; RMSE = 0.1296). These findings were similar to the established two-band Shortwave Infrared Normalized Difference Residue Index (SINDRI) ( R 2 = 0.8145; RMSE = 0.1324). Performance of the two-band generalized normalized difference and SINDRI decreased for the full-NDVI dataset ( R 2 = 0.5865 and 0.4144, respectively). For the three-band wavelength shift analyses applied to the NDVI < 0.3 dataset, a generalized ratio-based index with a 2031–2085–2216 nm band combination, closely matching established Cellulose Absorption Index (CAI) bands, was top performing ( R 2 = 0.8397; RMSE = 0.1231). Three-band indices with CAI-type wavelengths maintained top f R estimation performance for the full-NDVI dataset with a 2036–2111–2217 nm band combination ( R 2 = 0.7581; RMSE = 0.1548). The 2036–2111–2217 nm band combination was also top performing in f R estimation ( R 2 = 0.8690; RMSE = 0.0970) for an additional analysis assessing combined green vegetation cover and surface moisture effects. Our results indicate that a three-band configuration with band centers and wavelength tolerances of 2036 nm (±5 nm), 2097 nm (±14 nm), and 2214 (±11 nm) would optimize Landsat Next SWIR bands for f R estimation.

Remote Sensing↗

USGS2022

Fifty years of Landsat science and impacts

Since 1972, the Landsat program has been continually monitoring the Earth, to now provide 50 years of digital, multispectral, medium spatial resolution observations. Over this time, Landsat data were crucial for many scientific and technical advances. Prior to the Landsat program, detailed, synoptic depictions of the Earth's surface were rare, and the ability to acquire and work with large datasets was limited. The early years of the Landsat program delivered a series of technological breakthroughs, pioneering new methods, and demonstrating the ability and capacity of digital satellite imagery, creating a template for other global Earth observation missions and programs. Innovations driven by the Landsat program have paved the way for subsequent science, application, and policy support activities. The economic and scientific value of the knowledge gained through the Landsat program has been long recognized, and despite periods of funding uncertainty, has resulted in the program's 50 years of continuity, as well as substantive and ongoing improvements to payload and mission performance. Free and open access to Landsat data, enacted in 2008, was unprecedented for medium spatial resolution Earth observation data and substantially increased usage and led to a proliferation of science and application opportunities. Here, we highlight key developments over the past 50 years of the Landsat program that have influenced and changed our scientific understanding of the Earth system. Major scientific and programmatic impacts have been realized in the areas of agricultural crop mapping and water use, climate change drivers and impacts, ecosystems and land cover monitoring, and mapping the changing human footprint. The introduction of Landsat collection processing, coupled with the free and open data policy, facilitated a transition in Landsat data usage away from single images and towards time series analyses over large areas and has fostered the widespread use of science-grade data. The launch of Landsat-9 on September 27, 2021, and the advanced planning of its successor mission, Landsat-Next, underscore the sustained institutional support for the program. Such support and commitment to continuity is recognition of both the historic impact the program, and the future potential to build upon Landsat's remarkable 50-year legacy.

Remote Sensing of Environment↗

USGS2021

Semi-centennial of Landsat observations and pending Landsat 9 launch

The first Landsat was placed in orbit on 23 July 1972, followed by a series of missions that have provided nearly continuous, two-satellite 8-day repeat image coverage of the Earth’s land areas for the last half-century. These observations have substantially enhanced our understanding of the Earth’s terrestrial dynamics, both as a major element of the Earth’s physical system, the primary home of humans, and the major source of natural resources that support them. The history of Landsat is complex, reflective of the human systems that sustain it. Despite the conflicted perspectives surrounding the continuation of the program, Landsat has survived based on worldwide recognition of its critical contributions to understanding land dynamics, management of natural resources and Earth system science. Launch of Landsat 9 is anticipated in Fall 2021, and current planning for the next generation, Landsat Next is well underway. The community of Landsat data users is looking forward to another 50 years of the Landsat program.

Photogrammetric Engineering and Remote Sensing (PE↗

USGS2020

Landsat 9: Empowering open science and applications through continuity

The history of Earth observation from space is well reflected through the Landsat program. With data collection beginning with Landsat-1 in 1972, the program has evolved technical capabilities while maintaining continuity of land observations. In so doing, Landsat has provided a critical reference for assessing long-term changes to Earth's land environment due to both natural and human forcing. Poised for launch in mid-2021, the joint NASA-USGS Landsat 9 mission will continue this important data record. In many respects Landsat 9 is a clone of Landsat-8. The Operational Land Imager-2 (OLI-2) is largely identical to Landsat 8 OLI, providing calibrated imagery covering the solar reflected wavelengths. The Thermal Infrared Sensor-2 (TIRS-2) improves upon Landsat 8 TIRS, addressing known issues including stray light incursion and a malfunction of the instrument scene select mirror. In addition, Landsat 9 adds redundancy to TIRS-2, thus upgrading the instrument to a 5-year design life commensurate with other elements of the mission. Initial performance testing of OLI-2 and TIRS-2 indicate that the instruments are of excellent quality and expected to match or improve on Landsat 8 data quality. Landsat-9 will maintain the current data acquisition rate of up to 740 scenes per day, with these scenes available from the Landsat archive at no cost to users. In this communication, we provide background and rationale for the Landsat 9 mission, describe the instrument payloads and ground system, and discuss data products available from the Landsat 9 mission through USGS.

Remote Sensing of Environment↗

USGS2018

An overview of USGS-NASA Landsat Science activities during 2018

Two meetings of the U.S. Geological Survey (USGS)-NASA Landsat Science Team (LST) took place in 2018. The USGS Earth Resources Observation and Science (EROS) Center hosted the winter meeting, which took place February 21-22 in Sioux Falls, SD. The University of Colorado-Boulder hosted the summer meeting, which was held August 8-10 in Boulder, CO.

The Earth Observer↗

USGS2016

Selection and quality assessment of Landsat data for the North American forest dynamics forest history maps of the US

Using the NASA Earth Exchange platform, the North American Forest Dynamics (NAFD) project mapped forest history wall-to-wall, annually for the contiguous US (1986–2010) using the Vegetation Change Tracker algorithm. As with any effort to identify real changes in remotely sensed time-series, data gaps, shifts in seasonality, misregistration, inconsistent radiometry and cloud contamination can be sources of error. We discuss the NAFD image selection and processing stream (NISPS) that was designed to minimize these sources of error. The NISPS image quality assessments highlighted issues with the Landsat archive and metadata including inadequate georegistration, unreliability of the pre-2009 L5 cloud cover assessments algorithm, missing growing-season imagery and paucity of clear views. Assessment maps of Landsat 5–7 image quantities and qualities are presented that offer novel perspectives on the growing-season archive considered for this study. Over 150,000+ Landsat images were considered for the NAFD project. Optimally, one high quality cloud-free image in each year or a total of 12,152 images would be used. However, to accommodate data gaps and cloud/shadow contamination 23,338 images were needed. In 220 specific path-row image years no acceptable images were found resulting in data gaps in the annual national map products.

International Journal of Digital Earth↗

USGS2016

The global Landsat archive: Status, consolidation, and direction

New and previously unimaginable Landsat applications have been fostered by a policy change in 2008 that made analysis-ready Landsat data free and open access. Since 1972, Landsat has been collecting images of the Earth, with the early years of the program constrained by onboard satellite and ground systems, as well as limitations across the range of required computing, networking, and storage capabilities. Rather than robust on-satellite storage for transmission via high bandwidth downlink to a centralized storage and distribution facility as with Landsat-8, a network of receiving stations, one operated by the U.S. government, the other operated by a community of International Cooperators (ICs), were utilized. ICs paid a fee for the right to receive and distribute Landsat data and over time, more Landsat data was held outside the archive of the United State Geological Survey (USGS) than was held inside, much of it unique. Recognizing the critical value of these data, the USGS began a Landsat Global Archive Consolidation (LGAC) initiative in 2010 to bring these data into a single, universally accessible, centralized global archive, housed at the Earth Resources Observation and Science (EROS) Center in Sioux Falls, South Dakota. The primary LGAC goals are to inventory the data held by ICs, acquire the data, and ingest and apply standard ground station processing to generate an L1T analysis-ready product. As of January 1, 2015 there were 5,532,454 images in the USGS archive. LGAC has contributed approximately 3.2 million of those images, more than doubling the original USGS archive holdings. Moreover, an additional 2.3 million images have been identified to date through the LGAC initiative and are in the process of being added to the archive. The impact of LGAC is significant and, in terms of images in the collection, analogous to that of having had two additional Landsat-5 missions. As a result of LGAC, there are regions of the globe that now have markedly improved Landsat data coverage, resulting in an enhanced capacity for mapping, monitoring change, and capturing historic conditions. Although future missions can be planned and implemented, the past cannot be revisited, underscoring the value and enhanced significance of historical Landsat data and the LGAC initiative. The aim of this paper is to report the current status of the global USGS Landsat archive, document the existing and anticipated contributions of LGAC to the archive, and characterize the current acquisitions of Landsat-7 and Landsat-8. Landsat-8 is adding data to the archive at an unprecedented rate as nearly all terrestrial images are now collected. We also offer key lessons learned so far from the LGAC initiative, plus insights regarding other critical elements of the Landsat program looking forward, such as acquisition, continuity, temporal revisit, and the importance of continuing to operationalize the Landsat program.

Remote Sensing of Environment↗

USGS2013

Assessment of the NASA-USGS Global Land Survey (GLS) Datasets

The Global Land Survey (GLS) datasets are a collection of orthorectified, cloud-minimized Landsat-type satellite images, providing near complete coverage of the global land area decadally since the early 1970s. The global mosaics are centered on 1975, 1990, 2000, 2005, and 2010, and consist of data acquired from four sensors: Enhanced Thematic Mapper Plus, Thematic Mapper, Multispectral Scanner, and Advanced Land Imager. The GLS datasets have been widely used in land-cover and land-use change studies at local, regional, and global scales. This study evaluates the GLS datasets with respect to their spatial coverage, temporal consistency, geodetic accuracy, radiometric calibration consistency, image completeness, extent of cloud contamination, and residual gaps. In general, the three latest GLS datasets are of a better quality than the GLS-1990 and GLS-1975 datasets, with most of the imagery (85%) having cloud cover of less than 10%, the acquisition years clustered much more tightly around their target years, better co-registration relative to GLS-2000, and better radiometric absolute calibration. Probably, the most significant impediment to scientific use of the datasets is the variability of image phenology (i.e., acquisition day of year). This paper provides end-users with an assessment of the quality of the GLS datasets for specific applications, and where possible, suggestions for mitigating their deficiencies.

Remote Sensing of Environment↗

USGS2011

Continuity of Landsat observations: Short term considerations

As of writing in mid-2010, both Landsat-5 and -7 continue to function, with sufficient fuel to enable data collection until the launch of the Landsat Data Continuity Mission (LDCM) scheduled for December of 2012. Failure of one or both of Landsat-5 or -7 may result in a lack of Landsat data for a period of time until the 2012 launch. Although the potential risk of a component failure increases the longer the sensor's design life is exceeded, the possible gap in Landsat data acquisition is reduced with each passing day and the risk of Landsat imagery being unavailable diminishes for all except a handful of applications that are particularly data demanding. Advances in Landsat data compositing and fusion are providing opportunities to address issues associated with Landsat-7 SLC-off imagery and to mitigate a potential acquisition gap through the integration of imagery from different sensors. The latter will likely also provide short-term, regional solutions to application-specific needs for the continuity of Landsat-like observations. Our goal in this communication is not to minimize the community's concerns regarding a gap in Landsat observations, but rather to clarify how the current situation has evolved and provide an up-to-date understanding of the circumstances, implications, and mitigation options related to a potential gap in the Landsat data record.

Remote Sensing of Environment↗

USGS2010

Automated masking of cloud and cloud shadow for forest change analysis using Landsat images

Accurate masking of cloud and cloud shadow is a prerequisite for reliable mapping of land surface attributes. Cloud contamination is particularly a problem for land cover change analysis, because unflagged clouds may be mapped as false changes, and the level of such false changes can be comparable to or many times more than that of actual changes, even for images with small percentages of cloud cover. Here we develop an algorithm for automatically flagging clouds and their shadows in Landsat images. This algorithm uses clear view forest pixels as a reference to define cloud boundaries for separating cloud from clear view surfaces in a spectral-temperature space. Shadow locations are predicted according to cloud height estimates and sun illumination geometry, and actual shadow pixels are identified by searching the darkest pixels surrounding the predicted shadow locations. This algorithm produced omission errors of around 1% for the cloud class, although the errors were higher for an image that had very low cloud cover and one acquired in a semiarid environment. While higher values were reported for other error measures, most of the errors were found around the edges of detected clouds and shadows, and many were due to difficulties in flagging thin clouds and the shadow cast by them, both by the developed algorithm and by the image analyst in deriving the reference data. We concluded that this algorithm is especially suitable for forest change analysis, because the commission and omission errors of the derived masks are not likely to significantly bias change analysis results.

International Journal of Remote Sensing↗

USGS2010

Status and distribution of mangrove forests of the world using earth observation satellite data

Aim Our scientific understanding of the extent and distribution of mangrove forests of the world is inadequate. The available global mangrove databases, compiled using disparate geospatial data sources and national statistics, need to be improved. Here, we mapped the status and distributions of global mangroves using recently available Global Land Survey (GLS) data and the Landsat archive. Methods We interpreted approximately 1000 Landsat scenes using hybrid supervised and unsupervised digital image classification techniques. Each image was normalized for variation in solar angle and earth–sun distance by converting the digital number values to the top-of-the-atmosphere reflectance. Ground truth data and existing maps and databases were used to select training samples and also for iterative labelling. Results were validated using existing GIS data and the published literature to map ‘true mangroves’. Results The total area of mangroves in the year 2000 was 137,760 km2 in 118 countries and territories in the tropical and subtropical regions of the world. Approximately 75% of world's mangroves are found in just 15 countries, and only 6.9% are protected under the existing protected areas network (IUCN I-IV). Our study confirms earlier findings that the biogeographic distribution of mangroves is generally confined to the tropical and subtropical regions and the largest percentage of mangroves is found between 5° N and 5° S latitude. Main conclusions We report that the remaining area of mangrove forest in the world is less than previously thought. Our estimate is 12.3% smaller than the most recent estimate by the Food and Agriculture Organization (FAO) of the United Nations. We present the most comprehensive, globally consistent and highest resolution (30 m) global mangrove database ever created. We developed and used better mapping techniques and data sources and mapped mangroves with better spatial and thematic details than previous studies.

Global Ecology and Biogeography↗

USGS2010

An automated approach for reconstructing recent forest disturbance history using dense Landsat time series stacks

A highly automated algorithm called vegetation change tracker (VCT) has been developed for reconstructing recent forest disturbance history using Landsat time series stacks (LTSS). This algorithm is based on the spectral–temporal properties of land cover and forest change processes, and requires little or no fine tuning for most forests with closed or near close canopy cover. It was found very efficient, taking 2–3 h on average to analyze an LTSS consisting of 12 or more Landsat images using an average desktop PC. This LTSS-VCT approach has been used to examine disturbance patterns with a biennial temporal interval from 1984 to 2006 for many locations across the conterminous U.S. Accuracy assessment over 6 validation sites revealed that overall accuracies of around 80% were achieved for disturbances mapped at individual year level. Average user's and producer's accuracies of the disturbance classes were around 70% and 60% in 5 of the 6 sites, respectively, suggesting that although forest disturbances were typically rare as compared with no-change classes, on average the VCT detected more than half of those disturbances with relatively low levels of false alarms. Field assessment revealed that VCT was able to detect most stand clearing disturbance events, including harvest, fire, and urban development, while some non-stand clearing events such as thinning and selective logging were also mapped in western U.S. The applicability of the LTSS-VCT approach depends on the availability of a temporally adequate supply of Landsat imagery. To ensure that forest disturbance records can be developed continuously in the future, it is necessary to plan and develop observational capabilities today that will allow continuous acquisition of frequent Landsat or Landsat-like observations.

Remote Sensing of Environment↗

USGS2009

Development of time series stacks of Landsat images for reconstructing forest disturbance history

Forest dynamics is highly relevant to a broad range of earth science studies, many of which have geographic coverage ranging from regional to global scales. While the temporally dense Landsat acquisitions available in many regions provide a unique opportunity for understanding forest disturbance history dating back to 1972, large quantities of Landsat images will need to be analysed for studies at regional to global scales. This will not only require effective change detection algorithms, but also highly automated, high level preprocessing capabilities to produce images with subpixel geolocation accuracies and best achievable radiometric consistency, a status called imagery-ready-to-use (IRU). This paper describes a streamlined approach for producing IRU quality Landsat time series stacks (LTSS). This approach consists of an image selection protocol, high level preprocessing algorithms and IRU quality verification procedures. The high level preprocessing algorithms include updated radiometric calibration and atmospheric correction for calculating surface reflectance and precision registration and orthorectification routines for improving geolocation accuracy. These automated routines have been implemented in the Landsat Ecosystem Disturbance Adaptive System (LEDAPS) designed for processing large quantities of Landsat images. Some characteristics of the LTSS developed using this approach are discussed.

International Journal of Digital Earth↗