Geology topics

Jeb E. Brown

Publications and source records attributed to Jeb E. Brown.

14 recordsLinked to original sources

USGS2025

Tracking the sources of metals to the San Juan River, Four Corners Region, USA: An introduction to the thematic issue

Surface water quantity and quality is important for arid and semi-arid regions where many people, including underserved and Indigenous communities, rely on a scarce resource for drinking water, irrigation, livestock and ceremonial uses. The southwestern United States, and specifically the Four Corners Region (Colorado, Arizona, New Mexico and Utah), is an example of this situation. Elevated concentrations of metals including aluminium, arsenic and lead were identified in previous studies and this study in the San Juan River from below the Navajo Dam, through the Navajo Nation to Mexican Hat, Utah. An interdisciplinary team applied approaches and principles of geology, geochemistry, geomorphology, hydrology and statistics to gain a better understanding of the tributaries supplying the source(s) of metals to the San Juan River. This introductory paper provides an overview of the ‘Metal geochemical fingerprinting to identify sub-watershed source contributions to surface water at a regional arid watershed scale, Four Corners Region, USA’ thematic collection . An overview of sampling sites, techniques and potential sources of metals is provided. Approaches used in this study could be applied to investigations in similar systems globally.

Four Corners region↗

USGS2025

Disentangling geomorphic equifinality in sediment and hydrologic connectivity through the analyses of landscape drivers of hysteresis

Sources, transport mechanisms and pathways of fine sediment in river systems are dependent on a multitude of climatic, geomorphic and anthropogenic factors, resulting in geomorphic equifinality, in which it is difficult to parse how different landscape processes affect sediment transport across different spatiotemporal scales. The objectives of this study are to 1) provide a conceptual model to consider how differing spatial distributions and hydrologic timing of sediment sources, both upland and in-channel, can result in equifinal sediment transport outcomes, and 2) utilize analytical methods with widely available environmental datasets to infer sediment processes from stream gaging data. Hysteretic patterns of observed storm events were classified based on their direction and timing of peak sediment concentration, relative to streamflow, using records from 35 U.S. Geological Survey stream gages in the period between 2007 and 2023 within two different physiographic regions: the Mid-Atlantic Delaware River Basin (DRB) and the Midwestern Illinois River Basin (IRB). The DRB contains mixed forest, urban, suburban and agricultural watersheds over diverse topography, and the IRB is primarily an intensively managed agricultural watershed on flat terrain. We use principal component analysis and linear discriminant analysis to infer regional hydrologic relations with turbidity dynamics, and to identify the primary hydrologic and land surface characteristics most effective at distinguishing between hysteretic classes in each region. These analyses reveal underlying regional relations in storm event hydrodynamics and landscape characteristics that contribute to varying patterns in sediment dynamics. Incorporating these sediment dynamic relations with spatial distributions and hydrologic timing of sediment sources could help to improve process understanding and predictive capability of fine sediment transport in watersheds.

Delaware, Illinois, Indiana, New Jersey, New York,↗

USGS2025

Adaptive instrument design strategy for collecting water, sediment samples and stage data in remote, ephemeral arroyos in the arid southwestern United States

Methods for collecting water, suspended sediment samples, and streamflow from rivers and streams have been documented in the literature by various science agencies. However, some projects may require data collected in difficult conditions including remote sites, sites that have limited accessibility during storms, and streamflow that occurs rarely. For these studies, adaptive approaches to sampler instrument design can yield valuable sample and streamflow data previously unobtainable. Tracking the source(s) of metals to the San Juan River required water chemistry samples, suspended sediment samples, and streamflow data collected on 28 ephemeral arroyos and five perennial streams. These tributaries to the San Juan River presented many challenges because of their remote locations, inaccessibility during storms, and ephemeral nature. A novel design, following on previous adaptive instrument designs, was created for this specific project. The design includes readily available materials (i.e. sourced from hardware stores), low cost, and allows for ease of replacement. Three instruments were designed following these design goals: a siphon sampler (water chemistry), sediment trap (suspended sediments), and a stage sensor (water level). These instruments were mounted to a t-post array in the stream channel. This installation approach, collectively named the “sed-chem gage”, was operated at each ephemeral arroyo for two consecutive field seasons. The instrument design approach, parts list, and results of operation are presented herein. This approach will be useful to scientists, water managers, and communities who need to evaluate water flow and water and sediment chemistry in a large, remote area where traditional techniques and methods may be cost prohibitive.

Arizona, Colorado, New Mexico, Utah↗

USGS2025

Evaluating sediment transport and metal sorption in the San Juan River watershed

The physical and chemical characteristics of sediment influence the transport of metals in rivers. The San Juan River and its tributaries are located in the Four Corners Region in the southwestern United States and the watershed contains a wide variety of potential metal sources. Comparisons of past and present sediment data provide insight into the effects of seasonality and storm events on the transport of sediment within a watershed. Comparisons suggest finer (<0.63 µm) sediment particles increase at a greater rate during intense storm events than coarser sediment particles. These fine, clay-sized sediments have a greater potential for metal sorption. Statistical analyses compared upper and lower portions of the San Juan River. Results show that total elemental concentration decreases in sediments (1785.15 μ g l −1 ) and that concentrations increase in the aqueous phase (2063.08 μ g l −1 ) downstream in the San Juan River. Analyses using geochemical and scanning electron microscopy with energy dispersive spectroscopy suggest that sediment clay particles are the most likely constituent to transport metals in the San Juan River. Metal transport is further aided by metal oxide coatings that develop on the surfaces of larger particles. Increases in aggregation of fine-grained particles in the downstream portions of the San Juan River are also likely to bind elements within sediments, which can act as both a source and sink for metals in the lower watershed. CEC , geochemistry , PSD

Arizona, Colorado, New Mexico, Utah↗

USGS2025

Sources of water and salts for the Zuni Salt Lake in west-central New Mexico

The Zuni Salt Lake is located in a maar in west-central New Mexico and contains hypersaline water that has long been used by Native Americans for religious purposes and the collection of salt. There have been several investigations suggesting different sources for the water and salt to the lake. Springs, seeps, and ephemeral streamflow have all been observed to contribute freshwater to the lake, and brackish to hypersaline seeps have been documented along the banks of the lake. This report summarizes the findings of a study that characterizes the lake’s hydrology, its water and salinity sources, and the hydrogeologic conceptual model. Regional groundwater levels indicate that each of the aquifers in the area have the potential to discharge groundwater to the lake. There is also evidence of vertical groundwater flow pathways at the maar that were likely created by the igneous intrusion that fractured the intersecting aquifers. A detailed water budget was constructed from continuous lake stage, precipitation, and evaporation data to estimate the groundwater inflow to the Zuni Salt Lake. It was determined that groundwater inflow to the lake is 441 ±94 acre-feet per year, which composes as much as 77 percent of the total inflows. The high sodium and chloride concentrations measured in two hypersaline samples collected near the lake indicate that the majority of the dissolved solids entering the lake are from a hypersaline groundwater source. The geochemical and isotopic compositions measured in the lake and surrounding features support the interpretation that hypersaline groundwater is the primary source of salts to the lake, which is likely sourced from the older (and deeper) Permian units. The hypersaline groundwater samples collected during this investigation have a unique aqueous chemistry relative to each of the mapped aquifers, and variability in groundwater compositions is interpreted to result from differences in minerology and residence time.

New Mexico↗

USGS2025

Geochemical assessment of the suitability of converting a coal-fired power plant reservoir to a drinking-water reservoir

There is an increasing need for additional water storage in the United States, especially in arid regions. Alternatives like decommissioned power plant raw-water reservoirs would be cheaper to use than creating new reservoirs; however, the biogeochemical pollution risk of these reservoirs is not well understood. The San Juan Generating Station power plant and the associated reservoir will be used as a sediment-settling basin to store drinking water. To evaluate whether the reservoir is appropriate for this use, inorganic and organic constituents of concern were measured in reservoir sediment cores, pore water, and reservoir water in 2020. Forty-six percent of sediment arsenic concentrations measured in core subsamples (8 to 12 mg/kg) were slightly above the New Mexico residential cancer threshold for soil of 7.07 mg/kg. One sediment sample contained elevated total barium concentrations (6020 mg/kg). The organic compounds analyzed were either below detection limits or below regulatory thresholds. Reservoir water had one sample with arsenic greater than the drinking water standard (10 µg/L). Overall, the reservoir sediment inorganic and organic analyte concentrations are within acceptable ranges. The few samples that have elevated concentrations are not of a sufficient magnitude that dilution and/or treatment processes would preclude the use of the reservoir for water storage. Our findings show potential for use of former coal power station raw-water reservoirs as drinking-water reservoirs after plant closure.

New Mexico↗

USGS2023

Interim guidance for calibration checks on a submersible acoustic backscatter sediment sensor

Over the past two decades, the U.S. Geological Survey (USGS) and other agencies have pioneered the use of active acoustic sensors to monitor suspended-sediment concentrations and particle sizes in rivers and streams at the subdaily time scale. The LISST-ABS submersible acoustic backscatter sediment sensor (or “ABS sensor”) was developed by Sequoia Scientific, Inc., as an alternative to turbidity sensors for monitoring suspended-sediment concentrations in surface waters. The ABS sensor is different than traditional active acoustic instruments because it is small, lower in cost, lightweight, and requires less power; and the sampling volume is within the first 15 centimeters of the transducer face. Initial testing by the USGS indicated the ABS sensor had utility as a novel, cost-effective, off-the-shelf tool for monitoring suspended-sediment concentration in surface waters, and its use within the agency has increased in since its introduction around 2016. However, initial testing did not account for the potential of transducer calibration drift over longer deployments. As part of its mission to unify and standardize research and development activities of Federal agencies involved in fluvial sediment studies, the Federal Interagency Sedimentation Project partnered with the USGS Wyoming-Montana and New Mexico Water Science Centers to examine the potential for use of standard, low-tech laboratory equipment to perform calibration checks on ABS sensors on long-term deployments. The experiments were intended to provide USGS scientists and the public with interim guidance to assist in operating and maintaining the ABS sensor.

Open-File Report↗

USGS2023

State of the science and decision support for measuring suspended sediment with acoustic instrumentation

Acoustic instrumentation can be used to provide time-series and discrete estimates of suspended-sediment concentration, load, and sediment particle sizes in fluvial systems, which are essential for creating informed solutions to many sediment-related environmental, engineering, and land management concerns. Historically, scientists have developed relations between suspended sediment characteristics and other parameters, most commonly streamflow, to estimate sediment information when physical sediment samples cannot be collected. Approaches using streamflow can have substantial accuracy limitations because of hysteresis effects, giving rise to the use of more direct surrogate approaches such as acoustic methods. Interagency efforts in recent years have advanced the testing, methods development, operational guidelines, and training on acoustic methods for measuring suspended sediment. Scientists interested in using these methods are faced with many decisions on the type of application and deployment: horizontal profiling, vertical profiling, or point acoustic instruments; single or multifrequency instruments; continuous or discrete sediment measurements; and fixed or mobile instrument deployments. To promote cost-effective, accurate, and high-resolution fluvial sediment data for the Nation, the interagency Sediment Acoustic Leadership Team (SALT) develops technical guidance and training for using acoustic instruments to measure aquatic sediment. Even though acoustic instrumentation has been used successfully to measure suspended-sediment characteristics throughout the world, some deployments have been unsuccessful because of limited technical guidance and selection of an inappropriate method. To guide decisions on method selection, the SALT has compiled the state of the science for the main types of acoustics-based suspended-sediment measurement methods in development, testing, and use, and has created a flowchart to guide method selection.

Conference Paper↗

USGS2023

Acoustic measurements on a shallow, sand-bed river: A case study from the Rio Grande

The Middle Rio Grande (MRG) is a dynamic and complex fluvial system where flow and sediment transported from the Upper Rio Grande and MRG tributaries influence the form of the river. How sediment is transported through the MRG is an important planning question as it addresses a wide range of concerns including flood control and river rehabilitation, thus continuous sediment measurements are needed to develop accurate sediment budgets. Sediment measurement techniques have continued to improve and the advent of sediment surrogates, such as acoustic technology, have proven to be effective options at obtaining more complete spatial and temporal sediment data in larger fluvial systems. Measurements of sediment in shallow, sand bed rivers, like the Rio Grande, are more difficult because of the changing channel morphology and often limited water depth in which to install instrumentation. During the 2019 spring snow-melt runoff season two acoustic techniques were employed on the Rio Grande to evaluate sediment movement. Sediment movement near the bed was calculated by the Integrated Section Surface Difference Over Time version 2 (ISSDOTv2) using swath data collected from a multi-beam sonar. Measurements were made adjacent to U.S. Geological Survey (USGS) gaging stations where near simultaneous measurements were made by the USGS for streamflow, suspended-sediment concentration and gradation, and bed-material gradations. These measurements were conducted at two locations on the Rio Grande, one of the locations was co-located with two side-profiling suspended-sediment acoustic Doppler profilers that had been installed in the fall of 2016. Both a 1 MegaHertz (MHz) and 2 MHz side-profiling suspended-sediment acoustic Doppler instrument were installed on a fixed platform that was co-located with a USGS sediment gage. The ISSDOTv2 method using multi-beam sonar and the side-profiling acoustic Doppler profilers proved successful in collecting sediment information and compared well with the more traditional sediment measurements, while providing insight into the sediment transport on the MRG because of the increase in spatial and temporal resolution. Overall, there are some limitations of these acoustical techniques, but the additional information gleaned is beneficial in understanding sediment transport in a shallow, sand-bed river, such as the Rio Grande.

New Mexico↗

USGS2023

Preliminary analysis of a horizontal multifrequency hydroacoustic device designed for surrogate measurements of suspended sediment concentration: The Horizontal Acoustic Sediment Current Profiler

Single frequency active hydroacoustic measurements have been correlated with suspended sediment concentration. In river systems that include widely varying suspended sediment particle sizes, a multi-frequency hydroacoustic approach has increased predictive capabilities. However, the multi-frequency approach requires installation and operation of multiple sensors in a river channel and relies on technology previously designed for measuring water velocity. The Horizontal Acoustic Sediment Current Profiler (HASCP) is a single unit multi-frequency (500, 1,500, and 2,000 mHz) hydroacoustic sensor that was designed to target suspended sediment concentrations. The HASCP was briefly deployed in the Rio Grande at Albuquerque, NM, USGS gage in 2021 and is currently (2022) in operation at the Colorado River near Cameo, CO gage. Results of preliminary testing of the HASCP are presented in this paper.

Conference Paper↗

USGS2022

Suspended-sediment transport and water management, Jemez Canyon Dam, New Mexico, 1948–2018

Construction and operation of dams provide sources of clean drinking water, support large-scale irrigation, generate hydroelectricity, control floods, and improve river navigation. Yet these benefits are not without cost. Dams affect the natural flow regime, downstream sediment fluxes, and riverine and riparian ecosystems. The Jemez Canyon Dam in New Mexico was constructed in 1953 by the U.S. Army Corps of Engineers with authorizations for flood control and sediment retention. Water managers of the dam use various operational techniques to restore peak streamflow, improve sediment management, and restore altered ecosystem processes, while maintaining the authorized purposes of the dam. This study focuses on four distinct reservoir management operation periods implemented at the Jemez Canyon Dam: (1) predam (pre-1953), (2) a seasonal 24-hour hold pool (1953–79), (3) a permanent pool (1979–2001), and (4) dry reservoir (2001–18). Results of this study indicate successful flood control and reduction in peak instantaneous streamflow events following construction of the dam, specifically documented in 1958 and 2013. During the second water management operation period, moderate sediment retention (also defined as trap efficiency, which is the percentage of incoming sediments trapped within a reservoir during a given time) occurred (between 41.0 and 67.0 percent of sediments were retained). During the third period (1979–2001), between 61.2 and 99.8 percent of sediments were retained. During the fourth period (2001–18), at least 1,909 acre-feet of accumulated sediment were remobilized. The estimated dam trap efficiency during the fourth water management operation period was −37.2 percent, indicating that more sediments were being removed from the Jemez Canyon Reservoir than were being deposited. These remobilized sediments supplemented the natural sediment delivery in the Jemez River to the middle Rio Grande. The current (2022) dry reservoir operation allows sediment delivery during periods when flooding is not a concern while still providing flood control when needed. Suspended-sediment particle size data indicate potential coarsening of suspended sediments during the fourth water management operation period, likely resulting from erosion of coarse bed sediments deposited in the reservoir. Suspended-sediment particle size data during the first and fourth water management operation periods indicate that finer sediment mobilized during monsoon season than during snowmelt. Also, suspended-sediment concentrations during the predam and post-hold pool periods indicate concentrations were higher during monsoon season than during snowmelt. Seasonal variations in suspended-sediment concentration and particle size may help dam managers make operational decisions by increasing the understanding of particle size, concentration, and variation of suspended sediment during a given year. The seasonality of suspended-sediment transport can also vary, depending not only on concentration and particle size, but on precipitation. The maximum annual suspended-sediment loads occurred during all three seasonal categories analyzed in this study: snowmelt, monsoon, and the remainder of the year. This indicates that, in addition to sediment particle size and concentration, understanding the variability of transport mechanisms of suspended-sediment load can also guide optimal water management operations at a dam.

New Mexico↗

USGS2022

Field testing a high-frequency acoustic attenuation system for measuring fine suspended sediments and algal movements

Acoustic measurements of suspended sediment have the potential to allow remote, autonomous monitoring of sediment movements at much higher temporal resolution than traditional manual sampling methods. Although suspended sands present a challenging measurement problem due to their logarithmic distribution with depth, fine clay sediments are distributed evenly throughout a stream cross section, making them amenable to point measurements. In order to improve measurement capabilities for fine sediments in stream channels, The National Center for Physical Acoustics at The University of Mississippi has developed a remote, autonomous acoustic system to monitor fine sediments transported in streams. The system was tested on the Middle Rio Grande near San Acacia, New Mexico, and in Goodwin Creek in Panola County, Mississippi. The acoustic instruments were compared to sediment concentrations from physical samples in both deployments. Diurnal patterns were found in the acoustic signals from the Middle Rio Grande, and a follow up experiment at The University of Mississippi Biological Field Station was used to investigate the potential effects of algal biomass on acoustic attenuation measurements. The results showed diurnal patterns in attenuation were associated with patterns in light, temperature, and dissolved oxygen. These results combined with information from the literature indicate diel movement of algal colonies in the water column of some water bodies may interfere with high-frequency acoustic measurements in natural environments and that acoustic methods have the potential to allow ecological researchers to evaluate mass algal movements in the field. Results from Goodwin Creek demonstrate that the acoustic system is able to provide measurements of sediment concentration with high temporal resolution that track well with expected sediment transport patterns in response to discharge hydrographs.

Applied Acoustics↗

USGS2020

Sediment record of mining legacy and water quality from a drinking-water reservoir, Aztec, New Mexico, USA

The record of mining legacy and water quality was investigated in sediments collected in 2018 from four trenches in the Aztec, New Mexico, drinking-water reservoir #1. Bulk chemical analysis of sediments with depth in the reservoir revealed variable trace-element (uranium, vanadium, arsenic, copper, sulfur, silver, lead, and zinc) concentrations, which appear to coincide with historical mining and milling operations. Cesium-137 age dating, which identified the location of the 1963 radioactive fallout maximum, combined with the known age of the bottom and top of the sediment trenches, was used to estimate a polynomial sedimentation rate (average rate = 1.7 cm/yr). The clay size fraction (< 0.004 mm) was the dominant grain-size fraction of the sediments. Abundant fine-grained phyllosilicate (clay) minerals, predominantly montmorillonite and kaolinite, may explain sorption properties of trace elements. Scanning electron microscopy evaluation of sediments from two trenches showed copper and zinc associated with sulfur, and arsenic associated with iron and aluminum oxides. Results from laboratory batch experiments indicated that uranium, vanadium, and arsenic were released when sediments were reacted with a 150 mg/L sodium bicarbonate solution whereas copper was released when sediments were reacted with 2 mMol/L acetic acid. Observed concentrations from the two leach tests were below regulatory thresholds for delivery of solids to a landfill and were below drinking-water standards. Diatom relative abundance indicates that the water quality in the reservoir was not impaired by high metal concentrations.

Colorado, New Mexico↗

USGS2015

In situ densimetric measurements as a surrogate for suspended-sediment concentrations in the Rio Puerco, New Mexico

Surrogate measurements of suspended-sediment concentration (SSC) are increasingly used to provide continuous, high-resolution, and demonstrably accurate data at a reasonable cost. Densimetric data, calculated from the difference between two in situ pressure measurements, exploit variations in real-time streamflow densities to infer SSCs. Unlike other suspendedsediment surrogate technologies based on bulk or digital optics, laser, or hydroacoustics, the accuracy of SSC data estimated using the pressure-difference (also referred to as densimetric) surrogate technology theoretically improves with increasing SCCs. Coupled with streamflow data, continuous suspended-sediment discharges can be calculated using SSC data estimated in real-time using the densimetric technology. The densimetric technology was evaluated at the Rio Puerco in New Mexico, a stream where SSC values regularly range from 10,000-200,000 milligrams per liter (mg/L) and have exceeded 500,000 mg/L. The constant-flow dual-orifice bubbler measures pressure using two precision pressure-transducer sensors at vertically aligned fixed locations in a water column. Water density is calculated from the temperature-compensated differential pressure and SSCs are inferred from the density data. A linear regression model comparing density values to field-measured SSC values yielded an R² of 0.74. Although the application of the densimetric surrogate is likely limited to fluvial systems with SSCs larger than about 10,000 mg/L, based on this and previous studies, the densimetric technology fills a void for monitoring streams with high SSCs.

New Mexico↗