Geology topics

Jeanne M. Jones

Publications and source records attributed to Jeanne M. Jones.

At least 19 recordsLinked to original sources

USGS2026

Earthquake-hazard exposure of residents with potential access and functional needs in the United States

Earthquake response plans and earthquake early warning (EEW) systems designed for general populations may not consider potential access and functional needs (AFN) of individuals with physical, sensory, cognitive, or social limitations. Previous efforts to map the distribution of these populations have focused on social-vulnerability indices that ignore or oversimply these limitations. The descriptive and exploratory analysis summarized in this United States (U.S.) case study addresses this gap by identifying and integrating spatially explicit data for AFN-related residential populations, earthquake hazards, and county and county equivalents for the conterminous U.S., Alaska, Puerto Rico, and Hawaii. We focus on 13 AFN-related attributes that relate to an individual's ability to access information contained in an EEW alert, to understand and process earthquake information or observed ground shaking, and to take self-protective actions based on this information and physical cues of an earthquake. Depending on the demographic attribute, there are millions to tens of millions of U.S. residents with AFN-related attributes in areas considered to have varying likelihoods (2%, 10%, and 50%) of exceedance of a damaging earthquake in the next 50 years. Although these amounts represent low percentages at the national level, the percentage of individuals with AFN-related attributes in many counties and county equivalents substantially exceeds national percentages. No one county, county equivalent, U.S. state, or U.S. territory has the highest percentage of individuals in all AFN-related attributes; therefore, future efforts to increase individual resilience to earthquakes may benefit from understanding the local context of individuals with potential access and functional needs.

International Journal of Disaster Risk Reduction↗

USGS2025

Variations in road exposure and traffic volumes in the United States in areas susceptible to landslides

There have been many efforts in the United States (U.S.) to identify landslide threats for specific roads, but we are unaware of any effort to examine the entire national road system. We use geospatial tools to estimate the lengths and percentages of total length of roads in landslide-susceptible areas and differentiate results by road type, jurisdiction, and susceptibility level. We summarize traffic-volume counts in landslide-susceptible areas in terms of annual and maximum hourly counts using geospatial zones based on the concept of stopping-sight distances. A substantial percentage of the U.S. road network is in areas with some level of landslide susceptibility from 35 % (by length) of all roads to 68 % of county routes. Several Interstate highways have considerable lengths of road in areas with highest landslide susceptibility. There are hundreds of sites with high hourly and annual traffic volumes in areas of highest landslide susceptibility, indicating potential threats to life safety and traffic disruption.

International Journal of Disaster Risk Reduction↗

USGS2024

Projections of multiple climate-related coastal hazards for the US Southeast Atlantic

Faced with accelerating sea level rise and changing ocean storm conditions, coastal communities require comprehensive assessments of climate-driven hazard impacts to inform adaptation measures. Previous studies have focused on flooding but rarely on other climate-related coastal hazards, such as subsidence, beach erosion and groundwater. Here, we project societal exposure to multiple hazards along the Southeast Atlantic coast of the United States. Assuming 1 m of sea level rise, more than 70% of the coastal residents and US \ $ 1 trillion in property are in areas projected to experience shallow and emerging groundwater, 15 times higher than daily flooding. Storms increase flooding exposure by an order of magnitude over daily flooding, which could impact up to ~50% of all coastal residents and US \ $ 770 billion in property value. The loss of up to ~80% of present-day beaches and high subsidence rates that currently affect over 1 million residents will exacerbate flooding and groundwater hazard risks.

Florida, Georgia, North Carolina, South Carolina, ↗

USGS2024

Parsimonious high-resolution landslide susceptibility modeling at continental scales

Landslide susceptibility maps are fundamental tools for risk reduction, but the coarse resolution of current continental-scale models is insufficient for local application. Complex relations between topographic and environmental attributes characterizing landslide susceptibility at local scales are not transferrable across areas without landslide data. Existing maps with multiple susceptibility classifications under-represent landslide potential in moderate and gently sloping terrain. We leverage an extensive landslide database ( N = 613,724), a high-resolution digital elevation model (10-m), and high-performance computing resources, to develop a new nationwide susceptibility map for the contiguous United States, Hawaii, Alaska, and Puerto Rico. We calculate four alternative linear and nonlinear thresholds of topographic slope and relief using an objective split-sample calibration. We down-sample our results to a 90-m grid to account for uncertainty in the digital elevation model and landslide position, and evaluate these thresholds' ability to differentiate areas of greater susceptibility. The less conservative nonlinear model optimally balances our priorities of capturing observed landslides (99%) while minimizing area covered by susceptible terrain (43%). Independent evaluation with four statewide landslide inventories ( N = 172,367) reinforces our model selection but highlights spatially variable performance. Therefore, we propose a novel approach to susceptibility classification using the concentration of landslide-prone terrain within each down-sampled grid. While landslides are possible within any cells containing susceptible terrain, those with the highest concentration capture the majority of observed landslides. Our new map characterizes landside susceptibility more consistently than prior models; our transparent classification approach also provides flexibility for accommodating different tolerances in risk reduction measures.

AGU Advances↗

USGS2023

Current and future sinkhole susceptibility in karst and pseudokarst areas of the conterminous United States

Sinkholes in karst and pseudokarst regions threaten infrastructure, property, and lives. We mapped closed depressions in karst and pseudokarst regions of the conterminous United States (U.S.) from 10-m-resolution elevation data using high-performance computing, and then created a heuristic additive model of sinkhole susceptibility that also included nationally consistent data for factors related to geology, soils, precipitation extremes, and development. Maps identify potential sinkhole hotspots based on current conditions and projections for 50 years into the future (the years 2070–2079) based on climate change and urban development scenarios. Areas characterized as having either high or very high sinkhole susceptibility contain 94%–99% of known or probable sinkhole locations from three U.S. state databases. States and counties with the highest amounts and percentages of land in zones of highest sinkhole susceptibility are identified. Projected changes in extreme precipitation and development did not substantially change current hotspots of highest sinkhole susceptibility. Results provide a uniform index of sinkhole potential that can support national planning, instead of existing assessments produced through various methods within individual states or smaller areas.

conterminous United States↗

USGS2023

Community for data integration 2019 project report

The U.S. Geological Survey Community for Data Integration annually supports small projects focusing on data integration for interdisciplinary research, innovative data management, and demonstration of new technologies. This report provides a summary of the 14 projects supported in fiscal year 2019 and outlines their goals, activities, and accomplishments. Proposals in 2019 were encouraged to address the optional disciplinary theme of biosurveillance of emerging invasive species and health threats.

Open-File Report↗

USGS2022

Multi-hazard risk analysis for the U.S. Department of the Interior: An integration of expert elicitation, planning priorities, and geospatial analysis

An integral part of disaster risk management is identifying and prioritizing hazards and their potential impacts in a meaningful way to support risk-reduction planning. There has been considerable use and subsequent criticism of threat prioritization efforts that simply compare likelihoods and consequences of plausible threats. This article summarizes a new mixed-methods and scalable approach for prioritizing risks in a multi-hazard, multi-objective, and multi-criteria organizational context. This approach integrates (1) hazard characterizations using subject-matter-expert (SME) elicitation, (2) expressed preferences in planning priorities provided by emergency managers, and (3) quantitative estimates of asset exposure to hazards using geospatial data and geographic-information-systems (GIS) software. We demonstrate this approach with a case study designed to support multi-hazard mitigation and response planning done by the U.S. Department of the Interior (DOI) Office of Emergency Management, which required a national understanding of the risks posed by 75 natural, technological, and adversarial hazards to DOI managed and administered lands, facilities, people, revenues, and resources. Results demonstrate that hazard priorities vary depending on the asset, scale, and risk-management context, thereby making the case that “one-size-fits-all” hazard rankings have limited utility or relevance to real-world, risk mitigation and response planning. Our results suggest that recognizing the risk-management context provides greater transparency, flexibility, and relevance in comparing threats than traditional likelihood-threat matrices or the use of hazard SMEs to decide for planners which hazard scenarios are emphasized in risk planning.

International Journal of Disaster Risk Reduction↗

USGS2020

Community for data integration 2018 funded project report

The U.S. Geological Survey Community for Data Integration annually funds small projects focusing on data integration for interdisciplinary research, innovative data management, and demonstration of new technologies. This report provides a summary of the 10 projects funded in fiscal year 2018, outlining their goals, activities, and accomplishments.

Open-File Report↗

USGS2020

Progress toward a preliminary karst depression density map for the conterminous United States

Most methods for the assessment of sinkhole hazard susceptibility are predicated upon knowledge of pre-existing closed depressions in karst areas. In the United States (U.S.), inventories of existing karst depressions are piecemeal, and are often obtained through inconsistent methodologies applied at the state or county level and at various scales. Here, we present a first attempt at defining a karst closed depression inventory across the conterminous U.S. using a common methodology. Automated algorithms for extraction of closed depressions from 1/3 arc-second (approximately 10 m resolution) National Elevation Dataset (NED) were run on the U.S. Geological Survey (USGS) “Yeti” high-performance computing cluster. The full NED was first conditioned to reduce the creation of artificial closed depressions by breaching digital dams at road and stream crossings, using the flowlines and transportation route vectors from the USGS National Map. The resulting depressions were selected according to location within geologic units having the potential for karst, and screened for occurrence in areas of developed land, open water and wetlands, and areas of glacial and alluvial sediment cover. The results were used as the input to create a nationwide depression density map. Our results were compared with karst depression density maps for diverse karst regions within states that have existing closed depression inventories. The individual state-scale maps compared favorably to the results obtained from the method applied universally across the nation and illustrated regional sinkhole hotspots in known areas of well-developed karst. Limitations of the automated method includes false positive depressions resulting from artifacts generated during the computer processing of the elevation models, and inclusion of depressions resulting from non-karst geomorphic processes. More thorough examination of the screening criteria for depressions is required.

Conterminous United States↗

USGS2019

Dynamic flood modeling essential to assess the coastal impacts of climate change

Coastal inundation due to sea level rise (SLR) is projected to displace hundreds of millions of people worldwide over the next century, creating significant economic, humanitarian, and national-security challenges. However, the majority of previous efforts to characterize potential coastal impacts of climate change have focused primarily on long-term SLR with a static tide level, and have not comprehensively accounted for dynamic physical drivers such as tidal non-linearity, storms, short-term climate variability, erosion response and consequent flooding responses. Here we present a dynamic modeling approach that estimates climate-driven changes in flood-hazard exposure by integrating the effects of SLR, tides, waves, storms, and coastal change (i.e. beach erosion and cliff retreat). We show that for California, USA, the world’s 5 th largest economy, over $150 billion of property equating to more than 6% of the state’s GDP and 600,000 people could be impacted by dynamic flooding by 2100; a three-fold increase in exposed population than if only SLR and a static coastline are considered. The potential for underestimating societal exposure to coastal flooding is greater for smaller SLR scenarios, up to a seven-fold increase in exposed population and economic interests when considering storm conditions in addition to SLR. These results highlight the importance of including climate-change driven dynamic coastal processes and impacts in both short-term hazard mitigation and long-term adaptation planning.

Scientific Reports↗

USGS2018

Population vulnerability to tsunami hazards informed by previous and projected disasters: A case study of American Samoa

Population vulnerability from tsunamis is a function of the number and location of individuals in hazard zones and their ability to reach safety before wave arrival. Previous tsunami disasters can provide insight on likely evacuation behavior, but post-disaster assessments have not been used extensively in evacuation modeling. We demonstrate the utility of post-disaster assessments in pedestrian evacuation modeling for tsunami hazards and use the US territory of American Samoa as our case study. We model pedestrian travel times out of tsunami inundation zones recreated for the 2009 M w 8.1 Samoa earthquake, as well as for a probable maximum tsunami zone for future threats. Modeling assumptions are guided by fatality trends and observations of 2009 evacuation behavior, including insights on departure delays, environmental cues, transportation mode, and demographic characteristics. Differences in actual fatalities from the 2009 disaster and modeled population vulnerability suggest that a single set of estimated travel times to safety does not fully characterize evacuation potential of a dispersed, at-risk population. Efforts to prepare coastal communities in American Samoa for future tsunamis may be challenging given substantial differences in wave characteristics and evacuation potential of the probable maximum hazard compared to the 2009 event.

American Samoa↗

USGS2018

Projected 21st century coastal flooding in the Southern California Bight. Part 2: Tools for assessing climate change-driven coastal hazards and socio-economic impacts

This paper is the second of two that describes the Coastal Storm Modeling System (CoSMoS) approach for quantifying physical hazards and socio-economic hazard exposure in coastal zones affected by sea-level rise and changing coastal storms. The modelling approach, presented in Part 1, downscales atmospheric global-scale projections to local scale coastal flood impacts by deterministically computing the combined hazards of sea-level rise, waves, storm surges, astronomic tides, fluvial discharges, and changes in shoreline positions. The method is demonstrated through an application to Southern California, United States, where the shoreline is a mix of bluffs, beaches, highly managed coastal communities, and infrastructure of high economic value. Results show that inclusion of 100-year projected coastal storms will increase flooding by 9–350% (an additional average 53.0 ± 16.0 km 2 ) in addition to a 25–500 cm sea-level rise. The greater flooding extents translate to a 55–110% increase in residential impact and a 40–90% increase in building replacement costs. To communicate hazards and ranges in socio-economic exposures to these hazards, a set of tools were collaboratively designed and tested with stakeholders and policy makers; these tools consist of two web-based mapping and analytic applications as well as virtual reality visualizations. To reach a larger audience and enhance usability of the data, outreach and engagement included workshop-style trainings for targeted end-users and innovative applications of the virtual reality visualizations.

California↗

USGS2018

Assessing and communicating the impacts of climate change on the Southern California coast

Over the course of this and the next century, the combination of rising sea levels, severe storms, and coastal erosion will threaten the sustainability of coastal communities, development, and ecosystems as we currently know them. To clearly identify coastal vulnerabilities and develop appropriate adaptation strategies for projected increased levels of coastal flooding and erosion, coastal managers need user-friendly planning tools based on the best available climate and coastal science. In anticipation of these climate change impacts, many communities are in the early stages of climate change adaptation planning but lack the scientific information and tools to adequately address the potential impacts. In collaboration with leading scientists worldwide, the USGS designed the Coastal Storm Modeling System (CoSMoS) to assess the coastal impacts of climate change for the California coast, including the combination of sea level rise, storms, and coastal change. In this project, we directly address the needs of coastal resource managers in Southern California by integrating a vast range of global climate change projections and translate that information using sophisticated physical process models into planning-scale physical, ecological, and economic exposure, shoreline change, and impact assessments, all delivered in two simple, user-friendly, online tools. Our results show that by the end of the 21st century, over 250,000 residents and nearly $40 billion in building value across Southern California could be exposed to coastal flooding from storms, sea level rise, and coastal change. Results for the other major population center in California (the greater San Francisco Bay Area) are also available but not explicitly discussed in this report. Together, CoSMoS has now assessed the exposure of 95% of the 26 million coastal residents of the State (17 million in Southern California).

California↗

USGS2017

PRISM software—Processing and review interface for strong-motion data

Rapidly available and accurate ground-motion acceleration time series (seismic recordings) and derived data products are essential to quickly providing scientific and engineering analysis and advice after an earthquake. To meet this need, the U.S. Geological Survey National Strong Motion Project has developed a software package called PRISM (Processing and Review Interface for Strong-Motion data). PRISM automatically processes strong-motion acceleration records, producing compatible acceleration, velocity, and displacement time series; acceleration, velocity, and displacement response spectra; Fourier amplitude spectra; and standard earthquake-intensity measures. PRISM is intended to be used by strong-motion seismic networks, as well as by earthquake engineers and seismologists.

Techniques and Methods↗

USGS2017

Community for Data Integration 2016 annual report

The Community for Data Integration (CDI) represents a dynamic community of practice focused on advancing science data and information management and integration capabilities across the U.S. Geological Survey and the CDI community. This annual report describes the various presentations, activities, and outcomes of the CDI monthly forums, working groups, virtual training series, and other CDI-sponsored events in fiscal year 2016. The report also describes the objectives and accomplishments of the 13 CDI-funded projects in fiscal year 2016.

Open-File Report↗

USGS2017

PRISM Software: Processing and Review Interface for Strong‐Motion Data

A continually increasing number of high‐quality digital strong‐motion records from stations of the National Strong Motion Project (NSMP) of the U.S. Geological Survey, as well as data from regional seismic networks within the United States, calls for automated processing of strong‐motion records with human review limited to selected significant or flagged records. The NSMP has developed the Processing and Review Interface for Strong Motion data (PRISM) software to meet this need. In combination with the Advanced National Seismic System Quake Monitoring System (AQMS), PRISM automates the processing of strong‐motion records. When used without AQMS, PRISM provides batch‐processing capabilities. The PRISM software is platform independent (coded in Java), open source, and does not depend on any closed‐source or proprietary software. The software consists of two major components: a record processing engine composed of modules for each processing step, and a review tool, which is a graphical user interface for manual review, edit, and processing. To facilitate use by non‐NSMP earthquake engineers and scientists, PRISM (both its processing engine and review tool) is easy to install and run as a stand‐alone system on common operating systems such as Linux, OS X, and Windows. PRISM was designed to be flexible and extensible to accommodate implementation of new processing techniques. All the computing features have been thoroughly tested.

Seismological Research Letters↗

USGS2017

HERA: A dynamic web application for visualizing community exposure to flood hazards based on storm and sea level rise scenarios

The Hazard Exposure Reporting and Analytics (HERA) dynamic web application was created to provide a platform that makes research on community exposure to coastal-flooding hazards influenced by sea level rise accessible to planners, decision makers, and the public in a manner that is both easy to use and easily accessible. HERA allows users to (a) choose flood-hazard scenarios based on sea level rise and storm assumptions, (b) appreciate the modeling uncertainty behind a chosen hazard zone, (c) select one or several communities to examine exposure, (d) select the category of population or societal asset, and (e) choose how to look at results. The application is designed to highlight comparisons between (a) varying levels of sea level rise and coastal storms, (b) communities, (c) societal asset categories, and (d) spatial scales. Through a combination of spatial and graphical visualizations, HERA aims to help individuals and organizations to craft more informed mitigation and adaptation strategies for climate-driven coastal hazards. This paper summarizes the technologies used to maximize the user experience, in terms of interface design, visualization approaches, and data processing.

Computers & Geosciences↗

USGS2016

Pedestrian flow-path modeling to support tsunami evacuation and disaster relief planning in the U.S. Pacific Northwest

Successful evacuations are critical to saving lives from future tsunamis. Pedestrian-evacuation modeling related to tsunami hazards primarily has focused on identifying areas and the number of people in these areas where successful evacuations are unlikely. Less attention has been paid to identifying evacuation pathways and population demand at assembly areas for at-risk individuals that may have sufficient time to evacuate. We use the neighboring coastal communities of Hoquiam, Aberdeen, and Cosmopolis (Washington, USA) and the local tsunami threat posed by Cascadia subduction zone earthquakes as a case study to explore the use of geospatial, least-cost-distance evacuation modeling for supporting evacuation outreach, response, and relief planning. We demonstrate an approach that uses geospatial evacuation modeling to (a) map the minimum pedestrian travel speeds to safety, the most efficient paths, and collective evacuation basins, (b) estimate the total number and demographic description of evacuees at predetermined assembly areas, and (c) determine which paths may be compromised due to earthquake-induced ground failure. Results suggest a wide range in the magnitude and type of evacuees at predetermined assembly areas and highlight parts of the communities with no readily accessible assembly area. Earthquake-induced ground failures could obstruct access to some assembly areas, cause evacuees to reroute to get to other assembly areas, and isolate some evacuees from relief personnel. Evacuation-modeling methods and results discussed here have implications and application to tsunami-evacuation outreach, training, response procedures, mitigation, and long-term land use planning to increase community resilience.

Washington↗