Geology topics

Jason Payne

Publications and source records attributed to Jason Payne.

12 recordsLinked to original sources

USGS2018

New insights on scale-dependent surface-groundwater exchange from a floating self-potential Dipole

In south-central Texas the lower Guadalupe River has incised into the outcrop of the Carrizo-Wilcox aquifer. The river and the aquifer are hydraulically connected across the outcrop, although the connectivity is obscured at the surface by alluvium and surface-water and groundwater exchange dynamics are currently poorly understood. To investigate surface-water and groundwater exchange dynamics between the lower Guadalupe River and the Carrizo-Wilcox aquifer, a geophysical study was completed along a 14.86 km reach of the river by using water-borne gradient self-potential (SP) profiling and two-dimensional direct-current electric resistivity tomography. This paper explores the applicability of these water-borne geoelectric methods in delineating gaining and losing channel reaches, and demonstrates that geoelectric signals in the form of total electric field strength can be logged with an electric dipole and decomposed into component SP signals depicting regional and local groundwater flow patterns attributable to regional and localized hydraulic gradients. Localized SP anomalies of several tens of millivolts, indicative of hyporheic exchange flows, are observed and superimposed upon a 124 mV regional SP anomaly indicative of ambient groundwater exchange flows between the river and the aquifer. The observed SP signals are interpreted through two-dimensional finite-element modeling of streaming potentials attributable to ambient groundwater exchange and hyporheic exchange flow patterns. Variables of the channel environment such as temperature and concentration gradients, depth, and velocity are considered and subsequently eliminated as alternative sources of the SP signals that are presented.

Texas↗

USGS2017

Hydrogeologic and geochemical characterization and evaluation of two arroyos for managed aquifer recharge by surface infiltration in the Pojoaque River Basin, Santa Fe County, New Mexico, 2014–15

In order to provide long-term storage of diverted surface water from the Rio Grande as part of the Aamodt water rights settlement, managed aquifer recharge by surface infiltration in Pojoaque River Basin arroyos was proposed as an option. The initial hydrogeologic and geochemical characterization of two arroyos located within the Pojoaque River Basin was performed in 2014 and 2015 in cooperation with the Bureau of Reclamation to evaluate the potential suitability of these two arroyos as sites for managed aquifer recharge through surface infiltration. The selected reaches were high-gradient (average 3.0–3.5 percent) braided channels filled with unconsolidated sand and gravel-sized deposits that were generally 30–50 feet thick. Saturation was not observed in the unconsolidated channel sands in four subsurface borings but was found at 7–60 feet below the contact between the unconsolidated channel sands and the bedrock. The poorly to well-cemented alluvial deposits that make up the bedrock underlying the unconsolidated channel material is the Tesuque Formation. The individual beds of the Tesuque Formation are reported to be highly heterogeneous and anisotropic, and the bedrock at the site was observed to have variable moisture and large changes in lithology. Surface electrical-resistivity geophysical survey methods showed a sharp contrast between the electrically resistive unconsolidated channel sands and the highly conductive bedrock; however, because of the high conductivity, the resistivity methods were not able to image the water table or preferential flow paths (if they existed) in the bedrock. Infiltration rates measured by double-ring and bulk infiltration tests on a variety of channel morphologies in the study reaches were extremely large (9.7–94.5 feet per day), indicating that the channels could potentially accommodate as much as 6.6 cubic feet per second of applied water without generating surface runoff out of the reach; however, the small volume available for storage in the unconsolidated channel sands (about 410 acre-feet in the east arroyo and about 190 acre-feet in the west arroyo) and the potential for the infiltrating water to preferentially flow over the bedrock contact and out of the reach present a challenge for storing water. Although a detailed assessment of the infiltration rate of the Tesuque Formation is beyond the scope of this investigation, one double-ring infiltrometer test was conducted on an outcrop, resulting in an estimated infiltration rate of about 4 feet per day. The shallow groundwater observed in this investigation was determined to be recharged locally on the basis of groundwater elevations and geochemical and isotopic signatures. The channel sands and shallow bedrock were observed to be weathered, indicating contact with oxic groundwater following deposition. This observation was supported by whole-rock elemental analysis and mineralogy of several core samples. The downward groundwater gradient between the shallow wells and those wells screened at greater depths suggests that the shallow groundwater is recharged by local precipitation and has the potential to migrate to the deeper aquifer units. The two age-dating tracers measured in this investigation, however, demonstrate that the shallow groundwater flow paths are very slow and that the deeper flow paths are likely part of a larger regional system. The composition of the shallow, native groundwater suggests that storing water diverted from the Rio Grande is not likely to leach constituents of concern that would cause the stored water to exceed health-based U.S. Environmental Protection Agency Maximum Contaminant Levels.

New Mexico↗

USGS2016

Changes between early development (1930–60) and recent (2005–15) groundwater-level altitudes and dissolved-solids and nitrate concentrations In and near Gaines, Terry, and Yoakum Counties, Texas

Llano Estacado Underground Water Conservation District, Sandy Land Underground Water Conservation District, and South Plains Underground Water Conservation District manage groundwater resources in a part of west Texas near the Texas-New Mexico State line. Declining groundwater levels have raised concerns about the amount of available groundwater in the study area and the potential for water-quality changes resulting from dewatering and increased vertical groundwater movement between adjacent water-bearing units. In 2014, the U.S. Geological Survey, in cooperation with Llano Estacado Underground Water Conservation District, Sandy Land Underground Water District, and South Plains Underground Water Conservation District, began a multiphase project to develop a regional conceptual model of the hydrogeologic framework and geochemistry of the Ogallala, Edwards-Trinity, and Dockum aquifers. The Ogallala aquifer is the shallowest aquifer in the study area and is the primary source of water for agriculture and municipal supply in the area. This report describes the results of the first phase of the study, during which groundwater-level-altitude and selected water-quality data from wells in and near Gaines, Terry, and Yoakum Counties were compiled and evaluated for the Ogallala, Edwards-Trinity, and Dockum aquifers. Readily available digital groundwater data for the study area (geologic, well-construction, groundwater-level-altitude, and selected water-quality data) were compiled to assess temporal and spatial changes in groundwater resources from early development (1930–60) to recent (2005–15) periods. Pertinent data were compiled from available sources for the study area and for a 5-mile buffer area around the study area to prevent gridding errors near the boundary. Geologic and well-construction data were used to determine or verify the aquifer in which each well was completed. Depending on the available data, the aquifer assignment (aquifer in which a given well was completed) was determined on the basis of the following criteria, in order of priority: (1) the screened or open interval(s) of the well, (2) the total depth of the well, or (3) the completed aquifer reported for a given well by the data source. Potentiometric-surface maps were created to depict changes in groundwater-level altitudes for the Ogallala and Edwards-Trinity aquifers. In addition to comparing groundwater-level altitudes and water quality from the early development and recent periods, hydrographs of groundwater-level altitudes were created, and changes in water quality for various periods between 1930 and 2015 were evaluated. Variance maps for each groundwater-level-altitude grid were used to evaluate the spatial data coverage and to identify areas with higher uncertainty because of spatially limited data availability for some of the aquifers. For this report, existing dissolved-solids and nitrate concentration data were compiled and assessed for evidence of spatial patterns and changes over time. These data were compiled for samples collected from wells completed in the Ogallala, Edwards-Trinity, or Dockum aquifer during the early development period (1930–60) or the recent period (2005–15); temporal and spatial variations were assessed from depictions of the measured concentration values. Dissolved-solids and nitrate concentrations measured in samples from three wells completed in the Ogallala aquifer (well identifiers 11524, 11824, and 11825) for which long-term monitoring was done for various periods between 1950 and 2015 were also compiled and analyzed. Groundwater-level altitudes of the Ogallala aquifer are generally higher in the northwestern part of the study area and lower in the southeastern part of the study area, varying by as much as 800 feet. Groundwater flow paths for the early development period generally trend from northwest to southeast across the study area. Compared to those for the early development period, local features in the potentiometric surface for the recent period are more pronounced, likely as a result of additional data coverage, increased groundwater withdrawals, and local flow paths that are more variable. For the Edwards-Trinity aquifer potentiometric-surface map of the recent period, a general northwest to southeast flow gradient was also evident, with some subtle differences compared to the early development period. The Edwards-Trinity aquifer water-level-altitude change map between the early development and recent periods indicated similar spatial trends as in the Ogallala aquifer and indicated that groundwater-level altitudes declined over a large amount of the area for which sufficient data were available for reliably mapping changes. During the recent period, median dissolved-solids concentrations of less than 1,000 milligrams per liter (mg/L) were predominantly measured in the western part of the study area, and median concentrations of more than 1,000 mg/L were predominantly measured in the eastern part of the study area. A general pattern of increasing nitrate concentrations from west to the northeast was evident in the study area. Nitrate concentrations measured in samples collected from 16 wells completed in the Ogallala aquifer for the recent period were equal to or greater than 10 mg/L, the primary drinking water standard for finished drinking water.

Texas↗

USGS2013

A conceptual hydrogeologic model for the hydrogeologic framework, geochemistry, and groundwater-flow system of the Edwards-Trinity and related aquifers in the Pecos County region, Texas

The Edwards-Trinity aquifer is a vital groundwater resource for agricultural, industrial, and municipal uses in the Trans-Pecos region of west Texas. A conceptual model of the hydrogeologic framework, geochemistry, and groundwater-flow system in the 4,700 square-mile study area was developed by the U.S. Geological Survey (USGS) in cooperation with the Middle Pecos Groundwater Conservation District, Pecos County, City of Fort Stockton, Brewster County, and Pecos County Water Control and Improvement District No. 1. The model was developed to gain a better understanding of the groundwater system and to establish a scientific foundation for resource-management decisions. Data and information were collected or obtained from various sources to develop the model. Lithologic information obtained from well reports and geophysical data were used to describe the hydrostratigraphy and structural features of the groundwater system, and aquifer-test data were used to estimate aquifer hydraulic properties. Groundwater-quality data were used to evaluate groundwater-flow paths, water and rock interaction, aquifer interaction, and the mixing of water from different sources. Groundwater-level data also were used to evaluate aquifer interaction as well as to develop a potentiometric-surface map, delineate regional groundwater divides, and describe regional groundwater-flow paths. Several previous studies have been done to compile or collect physical and chemical data, describe the hydrogeologic processes, and develop conceptual and numerical groundwater-flow models of the Edwards-Trinity aquifer in the Trans-Pecos region. Documented methods were used to compile and collect groundwater, surface-water, geochemical, geophysical, and geologic information that subsequently were used to develop this conceptual model.

Texas↗

USGS2012

A conceptual model of the hydrogeologic framework, geochemistry, and groundwater-flow system of the Edwards-Trinity and related aquifers in the Pecos County region, Texas

A conceptual model of the hydrogeologic framework, geochemistry, and groundwater-flow system of the Edwards-Trinity and related aquifers, which include the Pecos Valley, Igneous, Dockum, Rustler, and Capitan Reef aquifers, was developed as the second phase of a groundwater availability study in the Pecos County region in west Texas. The first phase of the study was to collect and compile groundwater, surface-water, water-quality, geophysical, and geologic data in the area. The third phase of the study involves a numerical groundwater-flow model of the Edwards-Trinity aquifer in order to simulate groundwater conditions based on various groundwater-withdrawal scenarios. Resource managers plan to use the results of the study to establish management strategies for the groundwater system. The hydrogeologic framework is composed of the hydrostratigraphy, structural features, and hydraulic properties of the groundwater system. Well and geophysical logs were interpreted to define the top and base surfaces of the Edwards-Trinity aquifer units. Elevations of the top and base of the Edwards-Trinity aquifer generally decrease from the southwestern part of the study area to the northeast. The thicknesses of the Edwards-Trinity aquifer units were calculated using the interpolated top and base surfaces of the hydrostratigraphic units. Some of the thinnest sections of the aquifer were in the eastern part of the study area and some of the thickest sections were in the Pecos, Monument Draw, and Belding-Coyanosa trough areas. Normal-fault zones, which formed as growth and collapse features as sediments were deposited along the margins of more resistant rocks and as overlying sediments collapsed into the voids created by the dissolution of Permian-age evaporite deposits, were delineated based on the interpretation of hydrostratigraphic cross sections. The lowest aquifer transmissivity values were measured in the eastern part of the study area; the highest transmissivity values were measured in a faulted area of the Monument Draw trough. Hydraulic conductivity values generally exhibited the same trends as the transmissivity values. Groundwater-quality data and groundwater-level data were used in context with the hydrogeologic framework to assess the chemical characteristics of water from different sources, regional groundwater-flow paths, recharge sources, the mixing of water from different sources, and discharge in the study area. Groundwater-level altitudes generally decrease from southwest to northeast and regional groundwater flow is from areas of recharge south and west to the north and northeast. Four principal sources of recharge to the Edwards-Trinity aquifer were identified: (1) regional flow that originated as recharge northwest of the study area, (2) runoff from the Barilla, Davis, and Glass Mountains, (3) return flow from irrigation, and (4) upwelling from deeper aquifers. Results indicated Edwards-Trinity aquifer water in the study area was dominated by mineralized, regional groundwater flow that most likely recharged during the cooler, wetter climates of the Pleistocene with variable contributions of recent, local recharge. Groundwater generally flows into the down-dip extent of the Edwards-Trinity aquifer where it discharges into overlying or underlying aquifer units, discharges from springs, discharges to the Pecos River, follows a regional flow path east out of the study area, or is withdrawn by groundwater wells. Structural features such as mountains, troughs, and faults play a substantial role in the distribution of recharge, local and regional groundwater flow, spring discharge, and aquifer interaction.

Texas↗

USGS2011

Time-domain electromagnetic soundings collected in Dawson County, Nebraska, 2007-09

Between April 2007 and November 2009, the U.S. Geological Survey, in cooperation with the Central Platte Natural Resources District, collected time-domain electro-magnetic (TDEM) soundings at 14 locations in Dawson County, Nebraska. The TDEM soundings provide information pertaining to the hydrogeology at each of 23 sites at the 14 locations; 30 TDEM surface geophysical soundings were collected at the 14 locations to develop smooth and layered-earth resistivity models of the subsurface at each site. The soundings yield estimates of subsurface electrical resistivity; variations in subsurface electrical resistivity can be correlated with hydrogeologic and stratigraphic units. Results from each sounding were used to calculate resistivity to depths of approximately 90-130 meters (depending on loop size) below the land surface. Geonics Protem 47 and 57 systems, as well as the Alpha Geoscience TerraTEM, were used to collect the TDEM soundings (voltage data from which resistivity is calculated). For each sounding, voltage data were averaged and evaluated statistically before inversion (inverse modeling). Inverse modeling is the process of creating an estimate of the true distribution of subsurface resistivity from the mea-sured apparent resistivity obtained from TDEM soundings. Smooth and layered-earth models were generated for each sounding. A smooth model is a vertical delineation of calculated apparent resistivity that represents a non-unique estimate of the true resistivity. Ridge regression (Interpex Limited, 1996) was used by the inversion software in a series of iterations to create a smooth model consisting of 24-30 layers for each sounding site. Layered-earth models were then generated based on results of smooth modeling. The layered-earth models are simplified (generally 1 to 6 layers) to represent geologic units with depth. Throughout the area, the layered-earth models range from 2 to 4 layers, depending on observed inflections in the raw data and smooth model inversions. The TDEM data collected were considered good results on the basis of root mean square errors calculated after inversion modeling, comparisons with borehole geophysical logging, and repeatability.

Nebraska↗

USGS2011

Geophysical characterization of the Lollie Levee near Conway, Arkansas, using capacitively coupled resistivity, coring, and direct push logging

A geophysical characterization of Lollie Levee near Conway, Arkansas, was conducted in February 2011. A capacitively coupled resistivity survey (using Geometric's OhmMapper) was completed along the top and toe of the 6.7-mile levee. Two-dimensional inversions were conducted on the geophysical data. As a quality-control measure, cores and direct push logs were taken at approximately 1-mile intervals along the levee. The capacitively coupled resistivity survey, the coring, and the direct push logs were used to characterize the geologic materials. Comparison of the cores and the direct push log data, along with published resistivity values, indicates that resistivity values of 200 Ohm-meters or greater represent relatively clean sand, with decreasing resistivity values occurring with increasing silt and clay content. The cores indicated that the levee is composed of a heterogeneous mixture of sand, silt, and clay. The capacitively coupled resistivity sections confirm that the levee is composed of a heterogeneous mixture of high and low resistivity materials and show that the composition of the levee varies spatially. The geologic materials underlying the levee vary spatially as a result of the geologic processes that deposited them. In general, the naturally deposited geologic materials underlying the levee contain a greater amount of low resistivity materials in the southern extent of the levee.

Faulkner, Arkansas↗

USGS2011

Enhancement of USGS scientific investigations in Texas by using geophysical techniques, 2005-10

Geophysical techniques are an increasingly important tool for scientific investigations, environmental planning, and resource management. During 2005-10 the U.S. Geological Survey Texas Water Science Center greatly expanded its capabilities of using surface and borehole geophysical techniques to gain insights into how groundwater systems work and the occurrence and distribution of certain contaminants. Geophysical techniques provide a relatively quick and inexpensive means to characterize the subsurface hydrology and lithology.

Fact Sheet↗

USGS2009

Global Positioning System surveys of storm-surge sensors deployed during Hurricane Ike, Seadrift, Texas, to Lake Charles, Louisiana, 2008

The U.S. Geological Survey installed a network of pressure sensors at 65 sites along the Gulf Coast from Seadrift, Texas, northeast to Lake Charles, Louisiana, to record the timing, areal extent, and magnitude of inland storm surge and coastal flooding caused by Hurricane Ike in September 2008. A Global Positioning System was used to obtain elevations of reference marks near each sensor. A combination of real-time kinematic (RTK) and static Global Positioning System surveys were done to obtain elevations of reference marks. Leveling relative to reference marks was done to obtain elevations of sensor orifices above the reference marks. This report summarizes the Global Positioning System data collected and processed to obtain reference mark and storm-sensor-orifice elevations for 59 storm-surge sensors recovered from the original 65 installed as a necessary prelude to computation of storm-surge elevations. National Geodetic Survey benchmarks were used for RTK surveying. Where National Geodetic Survey benchmarks were not within 12 kilometers of a sensor site, static surveying was done. Additional control points for static surveying were in the form of newly established benchmarks or reestablished existing benchmarks. RTK surveying was used to obtain positions and elevations of reference marks for 29 sensor sites. Static surveying was used to obtain positions and elevations of reference marks for 34 sensor sites; four sites were surveyed using both methods. Multiple quality checks on the RTK-survey and static-survey data were applied. The results of all quality checks indicate that the desired elevation accuracy for the surveys of this report, less than 0.1-meter error, was achieved.

Louisiana, Texas↗

USGS2009

Direct-current resistivity profiling at the Pecos River Ecosystem Project study site near Mentone, Texas, 2006

The U.S. Geological Survey, in cooperation with Texas A&M University AgriLife, did a surface geophysical investigation at the Pecos River Ecosystem Project study site near Mentone in West Texas intended to determine shallow (to about 14 meters below the water [river] surface) subsurface composition (lithology) in and near treated (eradicated of all saltcedar) and control (untreated) riparian zone sites during June-August 2006. Land-based direct-current resistivity profiling was applied in a 240-meter section of the riverbank at the control site, and waterborne direct-current continuous resistivity profiling (CRP) was applied along a 2.279-kilometer reach of the river adjacent to both sites to collect shallow subsurface resistivity data. Inverse modeling was used to obtain a nonunique estimate of the true subsurface resistivity from apparent resistivity calculated from the field measurements. The land-based survey showed that the sub-surface at the control site generally is of relatively low resis-tivity down to about 4 meters below the water surface. Most of the section from about 4 to 10 meters below the water surface is of relatively high resistivity. The waterborne CRP surveys convey essentially the same electrical representation of the lithology at the control site to 10 meters below the water surface; but the CRP surveys show considerably lower resistivity than the land-based survey in the subsection from about 4 to 10 meters below the water surface. The CRP surveys along the 2.279-kilometer reach of the river adjacent to both the treated and control sites show the same relatively low resistivity zone from the riverbed to about 4 meters below the water surface evident at the control site. A slightly higher resistivity zone is observed from about 4 to 14 meters below the water surface along the upstream approximately one-half of the profile than along the downstream one-half. The variations in resistivity could not be matched to variations in lithology because sufficient rock samples were not available.

Texas↗

USGS2009

Capacitively Coupled Resistivity Survey of Selected Irrigation Canals Within the North Platte River Valley, Western Nebraska and Eastern Wyoming, 2004 and 2007-2009

Due to water resources of portions of the North Platte River basin being designated as over-appropriated by the State of Nebraska Department of Natural Resources (DNR), the North Platte Natural Resources District (NPNRD), in cooperation with the DNR, is developing an Integrated Management Plan (IMP) for groundwater and surface water in the NPNRD. As part of the IMP, a three-dimensional numerical finite difference groundwater-flow model is being developed to evaluate the effectiveness of using leakage of water from selected irrigation canal systems to manage groundwater recharge. To determine the relative leakage potential of the upper 8 m of the selected irrigation canals within the North Platte River valley in western Nebraska and eastern Wyoming, the U.S. Geological Survey performed a land-based capacitively coupled (CC) resistivity survey along nearly 630 km of 13 canals and 2 laterals in 2004 and from 2007 to 2009. These 13 canals were selected from the 27 irrigation canals in the North Platte valley due to their location, size, irrigated area, and relation to the active North Platte valley flood plain and related paleochannels and terrace deposits where most of the saturated thickness in the alluvium exists. The resistivity data were then compared to continuous cores at 62 test holes down to a maximum depth of 8 m. Borehole electrical conductivity (EC) measurements at 36 of those test holes were done to correlate resistivity values with grain sizes in order to determine potential vertical leakage along the canals as recharge to the underlying alluvial aquifer. The data acquired in 2004, as well as the 25 test hole cores from 2004, are presented elsewhere. These data were reprocessed using the same updated processing and inversion algorithms used on the 2007 through 2009 datasets, providing a consistent and complete dataset for all collection periods. Thirty-seven test hole cores and borehole electrical conductivity measurements were acquired based on the 2008 data. This report presents comparisons between the CC resistivity data and results from the 37 test holes and includes all binned and inverted CC resistivity datasets from all four years as well as the EC log data for the 37 test holes acquired in 2008 and 2009. The information gained from these data can help State and local water managers and scientists better understand the characteristics of the shallow subsurface underlying the irrigation canals so that the water resources can be managed more effectively.

Scientific Investigations Report↗

USGS2008

An Integrated Hydrogeologic and Geophysical Investigation to Characterize the Hydrostratigraphy of the Edwards Aquifer in an Area of Northeastern Bexar County, Texas

In August 2007, the U.S. Geological Survey, in cooperation with the San Antonio Water System, did a hydrogeologic and geophysical investigation to characterize the hydrostratigraphy (hydrostratigraphic zones) and also the hydrogeologic features (karst features such as sinkholes and caves) of the Edwards aquifer in a 16-square-kilometer area of northeastern Bexar County, Texas, undergoing urban development. Existing hydrostratigraphic information, enhanced by local-scale geologic mapping in the area, and surface geophysics were used to associate ranges of electrical resistivities obtained from capacitively coupled (CC) resistivity surveys, frequency-domain electromagnetic (FDEM) surveys, time-domain electromagnetic (TDEM) soundings, and two-dimensional direct-current (2D-DC) resistivity surveys with each of seven hydrostratigraphic zones (equivalent to members of the Kainer and Person Formations) of the Edwards aquifer. The principal finding of this investigation is the relation between electrical resistivity and the contacts between the hydrostratigraphic zones of the Edwards aquifer and the underlying Trinity aquifer in the area. In general, the TDEM data indicate a two-layer model in which an electrical conductor underlies an electrical resistor, which is consistent with the Trinity aquifer (conductor) underlying the Edwards aquifer (resistor). TDEM data also show the plane of Bat Cave fault, a well-known fault in the area, to be associated with a local, nearly vertical zone of low resistivity that provides evidence, although not definitive, for Bat Cave fault functioning as a flow barrier, at least locally. In general, the CC resistivity, FDEM survey, and 2D-DC resistivity survey data show a sharp electrical contrast from north to south, changing from high resistivity to low resistivity across Bat Cave fault as well as possible karst features in the study area. Interpreted karst features that show relatively low resistivity within a relatively high-resistivity area likely are attributable to clay or soil filling a sinkhole. In general, faults are inferred where lithologic incongruity indicates possible displacement. Along most inferred faults, displacement was not sufficient to place different members of the Kainer or Person Formations (hydrostratigraphic zones) adjacent across the inferred fault plane. In general, the Kainer Formation (hydrostratigraphic zones V through VIII) has a higher resistivity than the Person Formation (hydrostratigraphic zones II through IV). Although resistivity variations from the CC resistivity, FDEM, and 2D-DC resistivity surveys, with mapping information, were sufficient to allow surface mapping of the lateral extent of hydrostratigraphic zones in places, resistivity variations from TDEM data were not sufficient to allow vertical delineation of hydrostratigraphic zones; however, the Edwards aquifer-Trinity aquifer contact could be identified from the TDEM data.

Scientific Investigations Report↗