Search USGS⌕ Search

Geology topics

Janet Watt

Publications and source records attributed to Janet Watt.

At least 19 recordsLinked to original sources

3D broadband ground motion simulations of Cascadia megathrust earthquakes: Full-margin scenarios incorporating variable magnitudes and frontal thrust splay faulting

Great megathrust earthquakes (∼ M w 8–9) that rupture along the Cascadia Subduction Zone pose significant shaking and tsunami hazards to the U.S. Pacific Northwest. Although these large earthquakes are documented in the geologic record, none have been recorded with modern instrumentation, complicating regional seismic hazard assessments. To improve constraints on seismic hazard estimates for future earthquakes, we develop 3D broadband (0–10 Hz) ground‐motion simulations for 36 full‐margin megathrust earthquake scenarios through the Cascadia Coastlines and Peoples Hazards Research Hub. These simulations expand on the M9 Project ( Frankel et al. , 2018 ; Wirth, Frankel, et al. , 2018 ) by incorporating a broader range of rupture parameters—variable magnitudes, splay faulting, and geodetically informed slip distributions. Benchmarking these simulations against the Next Generation Attenuation Subduction (NGA‐Sub) ground‐motion models shows reasonable fits for non‐basin sites, although simulations predict stronger shaking at short (0–2 s) and long (6–10 s) periods. NGA‐Sub basin terms improve fits to synthetic shaking within the Seattle Basin but underpredict amplitudes by a factor of 2 at periods of 2–5 s. We also evaluate how rupture characteristics influence regional inland shaking variability and basin response in the Puget Lowlands. Larger magnitude scenarios generally cause stronger inland shaking due to farther inland extents of slip and larger strong‐motion‐generating fault patches but show little difference in basin amplification within the Puget Lowlands compared to smaller magnitude events. Along‐dip hypocenter location strongly influences overall inland shaking, with offshore (updip) hypocenters generating on average ∼45% higher shaking at long periods (>6 s) compared to onshore (downdip) hypocenters due to rupture directivity effects. Offshore splay faults minimally affect inland shaking but alter offshore deformation important for coupled ground‐shaking and tsunami scenarios. Finally, we show that rupture directivity increases amplification within the Seattle Basin through the generation and interaction of higher order mode surface waves, an effect of 3D basin geometry that cannot be captured using 1D approximations.

British Columbia, California, Oregon, Washington↗

Widespread abyssal turbidites record megathrust earthquake-triggered landslides and coseismic deformation in the Cascadia subduction zone

Abyssal marine turbidites provide some of the longest and most spatially extensive records of subduction zone earthquake recurrence globally; however, correlation of these deposits over long distances and interpretation of synchronous emplacement requires both an understanding of the turbidite generating systems and precise dating. Here, we present an integrated suite of high-resolution bathymetry, subbottom profiles, and sediment cores from combined autonomous underwater vehicle, remotely operated vehicle, and ship-based studies at a key paleoseismic site in the southern Cascadia subduction zone. We demonstrate how widespread, earthquake-triggered landslides on the lower slope deposit discrete, proximal mass transport deposits (MTDs) that grade offshore into complex, interfingered abyssal turbidites, which correspond to records of megathrust earthquake history. We propose accretion and oversteepening of thrust folds on the lower slope both preconditions the slope to fail and provides a perpetual source of unstable material to fail during every earthquake cycle. Furthermore, we suggest the periodic and pervasive landsliding indicates coseismic deformation of the outer accretionary wedge during megathrust rupture.

California, Oregon↗

Structural controls on splay fault rupture dynamics during Cascadia megathrust earthquakes

Great subduction earthquakes ( M w ≥ 8.0) can generate devastating tsunamis by rapidly displacing the seafloor and overlying water column. These potentially tsunamigenic seafloor offsets result from coseismic fault slip and deformation beneath or within the accretionary wedge. The mechanics of these shallow rupture phenomena and their dependence on subduction zone properties remain unresolved, partly due to the sparsity of offshore observations of shallow megathrust earthquake deformation. Here, we analyze how offshore structure influences shallow rupture mechanics and slip partitioning using 3D dynamic earthquake simulations of the Cascadia subduction zone (CSZ) megathrust with and without variably dipping seaward- or landward-vergent splay faults in the wedge that sole into the megathrust. Resulting tradeoffs between splay and megathrust slip reveal structural controls on rupture partitioning, with greater splay slip leading to less shallow megathrust slip updip. Gently dipping and seaward-vergent splays host more slip than those with steeper, landward-vergent splays. To isolate the underlying mechanisms, we compare models with Andersonian and plunging principal stresses. Results suggest distinct static and dynamic processes control the dip- and vergence-dependence of splay rupture: static (mis)alignment relative to far-field tectonic loading favors slip on more optimally oriented, shallowly dipping splay faults. In contrast, dynamic stress interactions of an updip-propagating megathrust rupture front with the free surface and potential branch faults favor forward branching onto seaward-vergent splays and inhibit backward branching onto landward-vergent splays. Resulting seafloor displacements suggest splay fault structure may influence coseismic tsunami source processes, highlighting the importance of dynamically viable rupture scenarios in subduction hazard assessments.

Cascadia subduction zone↗

Using subducting plate motion to constrain Cascadia slab geometry and interface strength

Subduction zones are home to multiple geohazards driven by the evolution of the regional tectonics, including earthquakes, volcanic eruptions and landslides. Past evolution builds the present-day structure of the margin, while the present-day configuration of the system determines the state-of-stress in which individual hazardous events manifest. Regional simulations of subduction zones provide a tool to synthesize the tectonic history of a region and investigate how geologic features lead to variations in the state of stress across the subduction system. However, it is challenging to design regional models that provide a force-balance that is consistent with the large-scale motion of surrounding tectonic plates while also not over-constraining the solution. Here, we present new models for the Cascadia subduction zone that meet these criteria and demonstrate how the motion of the subducting Juan de Fuca plate can be used to determine the along-strike variations in the viscous (long-term) coupling across the plate boundary. All successful models require lower viscous coupling in the northern section of the trench compared to the central and southern sections. However, due to uncertainties in the geometry of the Cascadia slab, we find that there is a trade-off between along-strike variation in viscous coupling and slab shape. Better constraints on the slab shape, and/or use of other observations are needed to resolve this trade-off. The approach presented here provides a framework for further exploring how geologic features in the overriding plate and the properties of the plate boundary region affect the state-of-stress across this and other subduction zones.

Cascadia subduction zone↗

No evidence for an active margin-spanning megasplay fault at the Cascadia Subduction Zone

It has been previously proposed that a megasplay fault within the Cascadia accretionary wedge, spanning from offshore Vancouver Island to Oregon, has the potential to slip during a future Cascadia subduction zone earthquake. This hypothetical fault has major implications for tsunami size and arrival times and is included in disaster-planning scenarios currently in use in the region. This hypothesis is evaluated in this study using CASIE21 deep-penetrating and U.S. Geological Survey high-resolution seismic reflection profiles. We map changes in wedge structural style and seismic character to identify the inner-outer wedge transition zone where a megasplay fault has been previously hypothesized to exist and evaluate evidence for active faulting within this zone. Our results indicate that there is not an active, through-going megasplay fault in Cascadia, but instead, the structure and activity of faulting at the inner-outer wedge transition zone is highly variable and segmented along strike, consistent with the segmentation of other physical and mechanical properties in Cascadia. Wedge sedimentation, plate dip, and subducting topography are proposed to play a major role in controlling megasplay fault development and evolution. Incorporating updated megasplay fault location, geometry, and activity into modeling of Cascadia earthquakes and tsunamis could help better constrain associated hazards.

British Columbia, Oregon, Washington↗

Late-Quaternary surface displacements on accretionary wedge splay faults in the Cascadia Subduction Zone: Implications for megathrust rupture

Because splay faults branch at a steep dip angle from the plate-boundary décollement in an accretionary wedge, their coseismic displacement can potentially result in larger tsunamis with distinct characteristics compared to megathrust-only fault ruptures, posing an enhanced hazard to coastal communities. Elsewhere, there is evidence of coseismic slip on splay faults during many of the largest subduction zone earthquakes, but our understanding of potentially active splay faults and their hazards at the Cascadia subduction zone remains limited. To identify the most recently active splay faults at Cascadia, we conduct stratigraphic and structural interpretations of near-surface deformation in the outer accretionary wedge for the ~400 km along-strike length of the landward vergence zone. We analyze recently acquired high-frequency sparker seismic data and crustal-scale multi-channel seismic data to examine the record of deformation in shallow slope basins and the upper ~1 km of the surrounding accreted sediments and to investigate linkages to deeper décollement structure. We present a new fault map for widest, most completely locked portion of Cascadia from 45 to 48°N latitude, which documents the distribution of faults that show clear evidence of recent late Quaternary activity. We find widespread evidence for active splay faulting up to 30 km landward of the deformation front, in what we define as the active domain, and diminished fault activity landward outside of this zone. The abundance of surface-deforming splay faults in the active outer wedge domain suggests Cascadia megathrust events may commonly host distributed shallow rupture on multiple splay faults located within 30 km of the deformation front.

British Columbia, California, Oregon, Washington↗

Diving deeper into seep distribution along the Cascadia Convergent Margin, USA

Previous margin-wide studies of methane seep distribution along the Cascadia Subduction Zone indicate peaks in seep density within the landward limit of the of gas hydrate stability zone (GHSZ; ≤500 m depth), suggesting a link between current ocean warming, acceleration of hydrate dissociated, and methane emissions. This inferred connection, however, may not account for regional geologic and/or structural complexities driving methane seepage. Expanding upon an existing seep database by adding new seeps data, we conducted statistical and spatial analyses to determine margin-wide distribution trends and offer a tectonic framework for understanding the tendency toward non-normality and spatial clustering. We then highlight the role of local-scale drivers of seep formation in addition to the first-order tectonic framework, using systematic geologic/geomorphic characterization of seep emission sites in southern Cascadia and case studies using meta-attribute analysis of seismic reflection data.. Seep distribution along the margin is non-random, but instead of clustering along the 500-m isobath, regions of high seep density occur in canyons and topographic highs. New findings from this study conclude that co-location of the outer arc high (OAH) and the landward limit of the GHSZ may explain high concentrations of seeps where deformation is the greatest and hydrates are unstable. Detailed analysis of the spatial relationships between seep sites and geologic-geomorphic features in southern Cascadia reveal a link between seeps and anticlines, with 52% of the seeps found in association with anticlines, 36% found at faults, 16% associated with canyons, and 11% at seafloor failure scarps. Given that a majority of anticlines are located along or seaward of the OAH in the actively deforming outer wedge, we suggest that the location of the OAH is a primary structural control on seep distribution. This scenario is supported by neural network analysis of multichannel seismic data revealing zones of probable fluid migration along vertical pipes, faults, and chimneys in the vicinity of active seep sites on anticlines. Determining linkages between seeps and submarine tectonic geomorphology is a crucial first step for understanding and forecasting the distribution of methane seepage, but also a necessity for evaluating causal relationships between ocean warming and gas-hydrate stability.

California, Oregon, Washington↗

Shallow deformation on the Kirby Hills fault, Sacramento–San Joaquin Delta, California (USA), revealed from high-resolution seismic reflection data and coring in a fluvial system

The Sacramento–San Joaquin Delta (Delta) in California (USA) is an important part of the state’s freshwater system and is also a major source of agricultural and natural resources. However, the Delta is traversed by a series of faults that make up the easternmost part of the San Andreas fault system at this latitude and pose seismic hazard to this region. In this study, we use new high-resolution chirp subbottom data to map and characterize the shallow expression of the Kirby Hills fault, where it has been mapped to cross the Sacramento River at the western extent of the Delta. The fault is buried here, but we document a broad zone of deformation associated with the eastern strand of the fault that changes in character, along strike, across ~600 m of the river channel. Radiocarbon dates from sediment cores collected in the Sacramento River provide some minimum constraints on the age of deformation. We do not observe evidence of the western strand as previously mapped. We also discuss difficulties of conducting a paleoseismologic study in a fluvial environment.

California↗

Working together to advance subduction zone science within SZ4D and the USGS

OnSunday, December 10, 2023, the U.S. Geological Survey (USGS) and Subduction Zones in Four Dimensions (SZ4D) co-hosted a workshop titled “Working Together to Advance Subduction Zone Science within SZ4D and the USGS”. The workshop attracted ~80 participants, with ~11 attendees from the USGS and ~17 participants from outside the United States Organizations represented included the Cascadia Region Earthquake Science Center (CRESCENT), the Cascadia Coastlines and Peoples (CoPes) Hub, and the Community Network for Volcanic Eruption Response (CONVERSE). Goals for this workshop included: ○ Discuss ideas and potential topics for SZ4D-USGS collaborations ○ Identify mechanisms and opportunities for potential collaboration ○ Identify barriers to collaboration (with possible solutions) ○ Compile topics addressed in the workshop and provide this information to SZ4D and USGS Leadership and the broader SZ4D and USGS Communities for their use.

Conference Paper↗

High-resolution marine seismic imaging of the Seattle fault zone: Near surface insights into fault zone geometry, Quaternary deformation, and long-term evolution

The Seattle fault zone (SFZ) is a north‐directed thrust fault system that underlies the greater Seattle metropolitan area. Evidence of past land level changes, landslides, liquefaction, and a local tsunami indicate that this 70‐km‐long fault system can host up to M 7–7.5 earthquakes. Both the geometry and earthquake recurrence of the SFZ are debated and surveys of the shallow subsurface have not yet been incorporated into deeper crustal‐scale structural interpretations, especially where the SFZ cuts across marine portions of the Puget Lowland. Here we use a new high‐resolution marine seismic reflection dataset to image fault‐related deformation in Quaternary sediments and Tertiary bedrock throughout Puget Sound and Lake Washington. We use this perspective of shallow geology as a link between existing crustal‐scale geophysical insights into fault geometry at depth and paleoseismological observations of faulting at the surface and propose a refined structural model for the SFZ. We interpret that our new seismic reflection data in the Rich Passage area of Puget Sound images evidence of an inactive, south‐dipping strand of the SFZ, which is overprinted by Quaternary folding and slip along north‐dipping backthrusts within the hanging wall of a blind, south‐dipping fault located 6 km farther north. To explain these results, we propose that the SFZ is a normal sequence fault propagation fold that has stepped northward through time, and we show the plausibility of this model through trishear forward modeling. Growth strata and faulting imaged in Quaternary sediments in Lake Washington and Rich Passage are consistent with the spatial distribution of folding and backthrusting that occurred during an M 7–7.5 earthquake in A.D. 900–930, corroborating existing evidence that the SFZ has been active throughout the Quaternary.

Bulletin of the Seismological Society of America↗

Mass wasting along the Cascadia subduction zone: Implications for abyssal turbidite sources and the earthquake record

The only submarine records of large (>M w 7) prehistoric earthquakes along the Cascadia subduction zone are derived from sequences of deep sea turbidites interpreted to represent synchronous, shaking-induced failures along the continental slope. However, the spatial correlation of these deposits along the margin is complicated and the chronological constraints involve significant uncertainties, raising questions about how these deposits were generated. Here we present the most comprehensive spatial database of seafloor failure scarps across the Cascadia margin to date, with more than 8700 features mapped. We observe pervasive mass wasting of the steep lower slope along the ∼800 km length of the margin. This portion of the margin is heavily deformed, uplifted and oversteepened, such that it may be optimally preconditioned to fail during intense shaking events. Our results suggest disintegration of the steep lower slope is likely the primary source of turbidity flows triggered by earthquake shaking in Cascadia. This more proximal source for seismoturbidite generation may be the principal process along subduction margins with steep lower slope topography and may explain why seismoturbidites are found in areas containing few submarine canyons. Furthermore, the extensive mass wasting present on the steep lower slope of central Cascadia, a critical 250 km long section where no records currently exist, suggests additional turbidite records may be found along this portion of the margin by selecting optimal sample sites based on failure patterns. The strong clustering of seafloor failures along the lower slope also suggests the most earthquake intense shaking may be spatially restricted to a narrow zone along the deformation front, which could have important implications for hazard predictions across the region.

California, Oregon, Washington↗

Marine paleoseismic evidence for seismic and aseismic slip along the Hayward-Rodgers Creek fault system in northern San Pablo Bay

Distinguishing between seismic and aseismic fault slip in the geologic record is difficult, yet fundamental to estimating the seismic potential of faults and the likelihood of multi-fault ruptures. We integrated chirp sub-bottom imaging with targeted cross-fault coring and core analyses of sedimentary proxy data to characterize vertical deformation and slip behavior within an extensional fault bend along the Hayward-Rodgers Creek fault system in northern San Pablo Bay. We identified and traced four key seismic horizons (R1–R4), all younger than approximately 1400 CE, that cross the fault and extend throughout the basin. A stratigraphic age model was developed using detailed down-core radiocarbon and radioisotope dating combined with measurements of anthropogenic metal concentrations. The onset of hydraulic mining within the Sierra Nevada in 1852 CE left a clear geochemical and magnetic signature within core samples. This key time horizon was used to calculate a local reservoir correction and reduce uncertainty in radiocarbon age calibration and models. Vertical fault offset of strata younger than the most recent surface-rupturing earthquake on the Hayward fault in 1868 CE suggest near-surface vertical creep is occurring along the fault in northern San Pablo Bay at a rate of approximately 0.4 mm/yr. In addition, we present evidence of at least one and possibly two coseismic events associated with growth strata above horizons R1 and R2, with median event ages estimated to be 1400 CE and 1800 CE, respectively. The timing of both these events overlaps with paleoseismic events on adjacent fault sections, suggesting the possibility of multi-fault rupture.

California↗

Toward an integrative geological and geophysical view of Cascadia subduction zone earthquakes

The Cascadia subduction zone (CSZ) is an exceptional geologic environment for recording evidence of land level changes, tsunamis, and ground motion that reveals at least 19 great megathrust earthquakes over the past 10 kyr. Such earthquakes are among the most impactful natural hazards on Earth, transcend national boundaries, and can have global impact. Reducing the societal impacts of future events in the U.S. Pacific Northwest and coastal British Columbia, Canada requires improved scientific understanding of megathrust earthquake rupture, recurrence, and corresponding hazards. Despite substantial knowledge gained from decades of research, large uncertainties remain about the characteristics and frequencies of past CSZ earthquakes. In this review, we summarize geological, geophysical, and instrumental evidence relevant to understanding megathrust earthquakes along the CSZ and associated uncertainties. We discuss how the evidence constrains various models of great megathrust earthquake recurrence in Cascadia and identify potential paths forward for the earthquake science community.

British Columbia, Oregon, Washington↗

Systematic characterization of morphotectonic variability along the Cascadia convergent margin: Implications for shallow megathrust behavior and tsunami hazards

Studies of recent destructive megathrust earth­quakes and tsunamis along subduction margins in Japan, Sumatra, and Chile have linked forearc mor­phology and structure to megathrust behavior. This connection is based on the idea that spatial varia­tions in the frictional behavior of the megathrust influence the tectono-morphological evolution of the upper plate. Here we present a comprehen­sive examination of the tectonic geomorphology, outer wedge taper, and structural vergence along the marine forearc of the Cascadia subduction zone (offshore northwestern North America). The goal is to better understand geologic controls on outer wedge strength and segmentation at spatial scales equivalent to rupture lengths of large earthquakes (≥M 6.7), and to examine potential linkages with shallow megathrust behavior. We use cross-margin profiles, spaced 25 km apart, to characterize along-strike variation in outer wedge width, steepness, and structural vergence (measured between the toe and the outer arc high). The width of the outer wedge varies between 17 and 93 km, and the steepness ranges from 0.9° to 6.5°. Hierarchical cluster analysis of outer wedge width and steepness reveals four distinct regions that also display unique patterns of structural ver­gence and shape of the wedge: Vancouver Island, British Columbia, Canada (average width, linear wedge, seaward and mixed vergence); Washington, USA (higher width, concave wedge, landward and mixed vergence); northern and central Oregon, USA (average width, linear and convex wedge, mixed and seaward vergence); and southern Oregon and northern California, USA (lower width, convex wedge, seaward and mixed vergence). Variabil­ity in outer wedge morphology and structure is broadly associated with along-strike megathrust segmentation inferred from differences in oceanic asthenospheric velocities, patterns of episodic tremor and slow slip, GPS models of plate locking, and the distribution of seismicity near the plate interface. In more detail, our results appear to delin­eate the extent, geometry, and lithology of dynamic and static backstops along the margin. Varying backstop configurations along the Cascadia mar­gin are interpreted to represent material-strength contrasts within the wedge that appear to regulate the along- and across-strike taper and structural vergence in the outer wedge. We argue that the morphotectonic variability in the outer wedge may reflect spatial variations in shallow megathrust behavior occurring over roughly the last few million years. Comparing outer wedge taper along the Cascadia margin to a global compilation suggests that observations in the global catalog are not accurately representing the range of hetero­geneity within individual margins and highlights the need for detailed margin-wide morphotectonic analyses of subduction zones worldwide.

British Columbia, California, Oregon, Washington↗

Submarine canyons, slope failures and mass transport processes in southern Cascadia

The marine turbidite record along the southern Cascadia Subduction Zone has been used to interpret paleoseismicity and suggest a shorter recurrence interval for large (>M7) earthquakes along this portion of the margin; however, the sources and pathways of these turbidity flows are poorly constrained. We examine the spatial distribution of sediment storage, downslope transport, and slope failures across the margin using multibeam bathymetry, sparker multichannel seismic and chirp subbottom data. Although deep-sea seismoturbidites are often linked to turbidity flows in submarine canyons, the morphology and stratigraphy of southern Cascadia suggests few of the canyons have been active sediment conduits during the recent sea level highstand. Stepped, intraslope basins trap most of the sediment from Rogue and Sixes canyons. Smith and Klamath canyons appear to be isolated, lower slope incisions with no connection to upper slope canyons or gullies. Aggradation and infilling of channels on the upper slope of Trinidad Canyon indicate limited sediment bypass during the Holocene. In contrast, there is evidence of extensive mass wasting of the lower slope, and non-channelized downslope flows outside of the canyon systems that appear to be likely sources of seismoturbidites in southern Cascadia, rather than routing of shelf sediment through submarine canyon systems.

California, Oregon↗

Controls on sediment distribution in the coastal zone of the central California transform continental margin, USA

We use >10,000 km of high-resolution seismic-reflection data together with multibeam bathymetry to document complex and highly variable post-Last Glacial Maximum (LGM) sediment distribution and thickness in the coastal zone (~10 m isobath to 5.6 km offshore) along a ~800 km section of central California's transform continental margin. Sediment thickness ranges from 0 (seafloor bedrock) to 64 m with a mean of 8.7 m. We delineate 25 coastal zone “sediment domains,” and group them based on common geomorphology and sediment occurrence. Thickest sediment occurs in “mountain front” and “large river” domains, which comprise 14.5% and 7.9% of the coastal zone and contain 30.1% and 18.2% of coastal zone sediment, respectively. In contrast, “small river” domains and “sediment-poor shelf” domains comprise 50.7% and 15.7% of the coastal zone and contain 18.4% and 12.7% of its sediment. The distribution and thickness of post-LGM sediment in the coastal zone is controlled by a combination of tectonics, sediment supply, and eustasy. Sediment is derived from a tectonically controlled coastal landscape of rapidly uplifting mountain fronts, more slowly uplifting marine terraces, and fault-bounded headlands and alluvial-estuarine troughs. Sediment supply is maximized along steep, landslide-prone, mountain fronts and at the mouths of large watersheds, and minimized along lower-relief, terraced coastal landscape drained by smaller rivers and creeks. In the offshore coastal zone, tectonics generates local uplifts and basins, and influences shelf width and gradient as well as the locations of some shelf-incised submarine canyons. Sea-level rise raises base level, drowns estuaries, creates accommodation space on the shelf (amount based on gradient), and isolates the heads of many submarine canyons at or near the shelfbreak. Comparison of shelf sediment volumes with estimates of “unaltered” watershed sediment supply reveals that a relatively small proportion of post-LGM sediment supply is preserved on the shelf offshore of some of the largest rivers. Sediments deposited in shoreline and shelf environments have limited preservation potential, and the most complete long-term geologic record of the post-LGM transgression and highstand is likely represented in slope and submarine fan deposits.

California↗

Cascadia Margin cold seeps: Subduction zone fluids, gas hydrates, and chemosynthetic habitats

Priority Geographic Area: The outer continental shelf and upper continental slope from Canada/U.S. border offshore Washington State to the Mendocino Fracture Zone (Northern California), entirely within the U.S. Exclusive Economic Zone (EEZ), from the outermost shelf to at least 2000 m water depth (Figure 1). Description of Priority Area: Since 2015, over a thousand water column gas plumes originating at seafloor gas seeps have been discovered landward of the Cascadia deformation front (e.g., Embley et al., 2016; Johnson et al., 2015, 2019; Merle and Embley, 2016; NA-95 Cruise Report, 2018; Riedel et al., 2018), adding to those that had long been known on Hydrate Ridge (e.g., Heeschen et al., 2003; Tréhu et al., 2004). The recently-discovered seeps stretch from offshore Vancouver Island to the Mendocino Fracture Zone and from the outer shelf to ~2000 m water depth, occurring both landward and seaward of the nominal limit for gas hydrate stability zone on the upper continental slope (Figure 1). Hundreds of seeps likely remain undiscovered. Water column imaging is incomplete both within the target geographic area and farther seaward, between the 2000 m isobath and the deformation front, which is the subject of an imaging study described in a white paper by Watt et al. The recently-discovered Cascadia Margin cold seeps partially overlap an important active margin gas hydrate province (Spence et al., 2001; Tréhu et al., 2003, 2004), as well as an area where sediments on the North American plate are folded and faulted and affected by fluids generated in the subduction complex beneath the Cascadia forearc (e.g., Saffer and Tobin, 2011). Several Ocean Drilling Program expeditions have focused on hydrate systems offshore Vancouver and Oregon (e.g., Riedel et al., 2009; Tréhu et al., 2004) and on the connection between the shallow and deep hydrogeologic systems. Cabled observatories now continuously monitor physical, chemical, and venting processes on south Hydrate Ridge (OOI; e.g., Philip et al., 2016a) and offshore Vancouver Island (NEPTUNE; e.g. Römer et al., 2016). Outside of these well-studied gas hydrate areas, a subset of the recently-discovered Cascadia seeps, including some that we visited with R/V Falkor in 2019 (e.g., https://schmidtocean.org/cruise/methane-seeps-at-edge-of-hydrate-stability/), also likely emit methane associated with shallow subseafloor gas hydrate systems. Other seeps are delivering not only methane, but also deep-derived gases (Baumberger et al., 2018, 2020) to the seafloor. Many Cascadia Margin seeps have also been recognized at water depths too shallow (e.g., 175 m) to be connected to gas hydrate dynamics. These seeps are postulated to be emitting gas and fluids that originated deep in accretionary wedge before migrating up normal faults generated during forearc extension associated with large earthquakes (Johnson et al., 2019). Only a small fraction of the recently discovered U.S. Cascadia Margin water column gas plumes has so far been verified by ROVs (Hercules from E/V Nautilus in 2016 and 2018; SuBastian from R/V Falkor in 2018 and 2019) to correspond to seafloor seeps. Careful scientific mapping, investigation, and sampling at the seeps have also been limited (e.g., Baumberger et al., 2018, 2020; Merle and Embley, 2016; Seabrook et al., 2018; Greinert et al. 2019). This white paper focuses on expanding exploration of already-identified U.S. Cascadia Margin cold seeps through a multipronged and multidisciplinary discovery program that could be accomplished with a variety of NOAA assets. The goals of the proposed exploration activities are to develop high-resolution maps of seep fields from deep ocean vehicles; to verify (and sample) seafloor gas emissions at the locations of water column plumes for compositional and isotopic studies; to map, sample, and conduct analyses on chemosynthetic communities and deep-sea coral habitats near seep sites to document species distributions and habitats as a function of depth and latitude along the margin; to collect seep geologic samples that can constrain the timing of methane emissions through geochronology; and to record environmental data (e.g., CTD) near the seafloor and in the water column above the seeps. Seafloor mapping using shipboard systems (multibeam/backscatter) would be needed to characterize seafloor features near seep sites. Water column imaging (EK60/80 and/or multibeam WCD data) conducted before and after seafloor explorations would capture active methane plumes and constrain temporal variations in seep emissions (e.g., Kannberg et al., 2013; Philip et al., 2016a, 2016b), which are known to vary on time scales as rapid as tidal cycles on this margin (e.g., Römer et al., 2016). What are the characterization and data needs in this area? Check all that apply: __x_ Biology, Geology, Physical Oceanography, Chemistry ___ Marine Archaeology ___ Other Provide a list or brief description of the data needed within this area, from your perspective: 1. Water column backscatter to image active gas plumes 2. High-resolution multibeam bathymetry, seafloor backscatter, and shallow sub-bottom imaging 3. Visual characterization and ground truthing of potential seeps, including high-resolution mapping and photography from near-seafloor vehicles; collection of seep-associated species, corals, sediments, authigenic carbonates, gases, and seawater Describe relevance to national security, conservation, and/or the economy: The Cascadia margin seeps provide significant ecosystem services, including habitat for commercially important fishes and support for diversity along the continental margin. Methane seeps are also biological hotspots for krill, plankton, and crustaceans, which in turn sustain higher trophic levels (e.g., whales). Methane-derived authigenic carbonates serve as a hard substrate for deep-sea corals and sponges on millennial time scales. The studies proposed here will elucidate the relationship among seep environments, deep-sea corals, sponges, fisheries, and other organisms and provide new insight into subduction zone and hydrate-associated fluids in this important seismogenic zone. The studies address fishery management concerns and inform future conservation of sensitive species (e.g., deep-sea corals) and benthic habitats. From your perspective, what makes this area unique? The Cascadia Margin seeps are a critical component of the leaky margin that stretches from Baja California to the Aleutian Arc along the Pacific coastline of North America. Cold seeps have been intensely studied on the Gulf of Mexico and U.S. Atlantic passive margins with a focus on chemosynthetic communities, deep-sea corals, and leakage of microbially-generated and/or thermogenic hydrocarbons; however, the recently-discovered Cascadia Margin seeps, as well as active margin seep systems in general, remain more poorly characterized. Such seeps not only contribute to the ocean carbon cycle (e.g., Pohlman et al., 2011), thereby fueling the base of the food chain in these settings, but also emit subduction zone fluids that provide clues about processes within the seismogenic zone and the accretionary complex. The Cascadia seeps area allows both biological (e.g., benthic habitats, coral distributions) and physical processes (e.g., generation of subduction zone fluids) to be studied along both depth (perpendicular to the deformation front) and latitudinal gradients.

California, Oregon, Washington↗

Mapping, exploration, and characterization of the California continental margin and associated features from the California-Oregon border to Ensenada, Mexico

Priority Geographic Area: Both within and outside US Exclusive Economic Zone (EEZ). California continental margin. This area includes and continues south of the geographic area captured in the Watt et al. white paper. Description of Priority Area: The California continental margin, from the narrow shelf to abyssal depths, contains diverse seafloor features that influence benthic community types, biological connectivity, and is associated with significant seafloor geohazards. These complex features include marginal basins, depositional slopes, submarine canyons, ridges, and seamounts, and seep environments as a result of fluid seeps along active faults. Water column characteristics are variable, with steep gradients in current velocities, which influence sediment transport, from depositional fans (slow flow, muddy) to submarine canyons and seamounts (high currents, rocky, rugged terrain). These features and associated environments can influence the distribution of deep-sea habitats, including coral and sponge communities. South of the region described in the Watt et al. and Demopoulos et al. white papers, plentiful seeps occur from northern California down to the southern California Borderland. However, the underlying foundational geology associated with these seeps varies along the margin, changing with contrasting tectonic settings, from convergent tectonics to regions dominated by strike-slip faulting (Barry et al. 1996; Paull et al. 2008; Bernardo and Smith 2010; Maloney et al. 2015). For seeps located off southern California, the relationship to strike-slip fault systems may influence the distribution of seep fluid expulsion sites and associated seep habitats (Maloney et al. 2015; Grupe et al. 2015; Conrad et al., 2017), where transpression plays a key role in formation and localization of fluid seeps. Further exploration is required in order to understand these connections. Several submarine canyons intersect the shelf within this region, serving as important channels of energy and transport of sediment from shelf to slope depths. Canyons are typically associated with high currents, turbidity flows, steep and rugged terrain, and high food availability, all of which structures canyon communities and supports hotspots of biodiversity. Specific canyons along the California margin that have been well studied include Scripps and La Jolla Canyons off San Diego, and Monterey Canyon off Monterey, but many more remain relatively unexplored. Commercially important species of fish and invertebrates have been found associated with canyons, as well as deep-sea corals and sponges (e.g., Barry et al. 1996). However, in contrast to their Atlantic counterparts (e.g., through ACUMEN and ASPIRE campaigns) there has been a dearth of exploration and characterization of canyons along the California margin. A number of questions remain regarding canyon and slope wall stability and associated geohazards, plus, how the canyons connect and influence the broader regional biogeography of benthic communities is unknown. Due to their topography, seamounts along the California margin are characterized by steep slopes, large areas of rocky substrate, and high currents. Hydrological complexity is associated with seamounts given they impinge different watermasses, depending on depth range. This heterogeneity yields complex and diverse benthic communities, including commercially important fishes (e.g., Tracey et al., 2012). The geology of Davidson, Pioneer, San Juan, and Rodriquez Seamounts has received considerable study (e.g., Davis et al., 2010) but other seamounts are less known, including how they are biologically and ecologically connected. For example, research comparing the benthic communities associated with Rodriguez and San Juan Seamounts, located outside of the Channel Islands National Marine Sanctuary and within the proposed Chumash Heritage National Marine Sanctuary, to communities found within the sanctuary is critical for managing and protecting resources within the sanctuary and modifying sanctuary boundaries. Exploration would yield the data needed to delineate and characterize essential fish habitats, and deep-sea coral and sponge communities, thus directly connecting the utility of exploration and discovery to decision making. The southern California Borderland is a geomorphologically heterogeneous area created by a complex network of faults, containing deep basins separated by shallow ridges and islands. Persistent fault-related deformation has created complex features, such as exposure of scarps and uplift rocks/ridges, seeps, erosional terraces, hydrate mounds, and mud volcanoes that provide support for thriving benthic communities. That said, significant oxygen minimum zones and low aragonite saturation states persist within several of the basin environments, influencing energy flow, community ecology, and calcification. For example, the combined effects of hypoxia and acidification pose serious threats to marine organisms and biological resources along the California margin. Mapping and exploration of the extensive faults and fault scarps can help constrain historical earthquake activity. But many questions remain regarding how the underlying geology and geological processes have shaped the biological communities.

California↗