Search USGS⌕ Search

Geology topics

Janet K. Pitman

Publications and source records attributed to Janet K. Pitman.

At least 145 records · Page 8Linked to original sources
USGS2010

Geology and assessment of undiscovered oil and gas resources in Mesozoic (Jurassic and Cretaceous) rocks of the onshore and state waters of the Gulf of Mexico Region, U.S.A

The U.S. Geological Survey (USGS) is in the final phase of the most recent assessment of the undiscovered technically recoverable oil and gas resources of the U.S. Gulf of Mexico coastal plain and state waters. Ongoing geologic, geochemical, and petrophysical framework studies have defined the total petroleum systems and assessment units (AUs) in the Gulf Coast region. Current studies examine the Mesozoic (Jurassic and Cretaceous) source rocks and reservoir units, and recent studies have assessed the undiscovered resources in Tertiary and certain Jurassic and Cretaceous units. The Upper Jurassic and Lower Cretaceous Cotton Valley Group and Lower Cretaceous Hosston and Travis Peak formations, as well as the Upper Cretaceous Taylor and Navarro groups and the Tuscaloosa and Woodbine groups downdip shelf-margin deltas, were assessed in 2006. Tertiary strata were assessed in 2007. Jurassic strata presently under evaluation include the Upper Jurassic Norphlet, Smackover, Haynesville, and Bossier formations. Lower Cretaceous units to be assessed in the present study include the Knowles Limestone, Sligo Formation, Trinity Group, Fredericksburg Group, and lower part of the Washita Group. Upper Cretaceous rocks being assessed include the Buda Limestone of the Washita Group, Eagle Ford Group (Eagle Ford shale, and the updip Tuscaloosa and Woodbine groups), Austin Chalk (Group), and Tokio and Eutaw formations. For each AU, a geologic model is developed to define hydrocarbon source, charge, migration, trap, and reservoir, and to estimate technically recoverable undiscovered oil and gas resources. The USGS assessment is focused on evaluating conventional clastic and carbonate deposystems, as well as resource volumes in emerging unconventional gas, shale gas, and shale oil plays currently attracting global attention.

Texas, Louisiana, Alabama, Mississippi, Florida↗
USGS2009

Assessment of undiscovered oil and gas in the Arctic

Among the greatest uncertainties in future energy supply and a subject of considerable environmental concern is the amount of oil and gas yet to be found in the Arctic. By using a probabilistic geology-based methodology, the United States Geological Survey has assessed the area north of the Arctic Circle and concluded that about 30% of the world’s undiscovered gas and 13% of the world’s undiscovered oil may be found there, mostly offshore under less than 500 meters of water. Undiscovered natural gas is three times more abundant than oil in the Arctic and is largely concentrated in Russia. Oil resources, although important to the interests of Arctic countries, are probably not sufficient to substantially shift the current geographic pattern of world oil production.

Science↗
USGS2009

An estimate of recoverable heavy oil resources of the Orinoco Oil Belt, Venezuela

The Orinoco Oil Belt Assessment Unit of the La Luna-Quercual Total Petroleum System encompasses approximately 50,000 km2 of the East Venezuela Basin Province that is underlain by more than 1 trillion barrels of heavy oil-in-place. As part of a program directed at estimating the technically recoverable oil and gas resources of priority petroleum basins worldwide, the U.S. Geological Survey estimated the recoverable oil resources of the Orinoco Oil Belt Assessment Unit. This estimate relied mainly on published geologic and engineering data for reservoirs (net oil-saturated sandstone thickness and extent), petrophysical properties (porosity, water saturation, and formation volume factors), recovery factors determined by pilot projects, and estimates of volumes of oil-in-place. The U.S. Geological Survey estimated a mean volume of 513 billion barrels of technically recoverable heavy oil in the Orinoco Oil Belt Assessment Unit of the East Venezuela Basin Province; the range is 380 to 652 billion barrels. The Orinoco Oil Belt Assessment Unit thus contains one of the largest recoverable oil accumulations in the world.

Fact Sheet↗
USGS2008

Circum-Arctic resource appraisal: Estimates of undiscovered oil and gas north of the Arctic Circle

The U.S. Geological Survey (USGS) has completed an assessment of undiscovered conventional oil and gas resources in all areas north of the Arctic Circle. Using a geology-based probabilistic methodology, the USGS estimated the occurrence of undiscovered oil and gas in 33 geologic provinces thought to be prospective for petroleum. The sum of the mean estimates for each province indicates that 90 billion barrels of oil, 1,669 trillion cubic feet of natural gas, and 44 billion barrels of natural gas liquids may remain to be found in the Arctic, of which approximately 84 percent is expected to occur in offshore areas.

Fact Sheet↗
USGS2008

Assessment of undiscovered oil and gas resources of the Timan-Pechora Basin Province, Russia, 2008

The U.S. Geological Survey (USGS) recently assessed the undiscovered oil and gas potential of the Timan-Pechora Basin Province in Russia as part of the USGS Circum-Arctic Oil and Gas Resource Appraisal program. Geologically, the Timan-Pechora Basin Province is a triangular-shaped cratonic block bounded by the northeast-southwest trending Ural Mountains and the northwest-southeast trending Timan Ridge. The northern boundary is shared with the South Barents Sea Province (fig.1). The Timan-Pechora Basin Province has a long history of oil and gas exploration and production. The first field was discovered in 1930 and, after 75 years of exploration, more than 230 fields have been discovered and more than 5,400 wells have been drilled. This has resulted in the discovery of more than 16 billion barrels of oil and 40 trillion cubic feet of gas.

Timan-Pechora Basin Province↗
USGS2008

Assessment of undiscovered oil and gas resources of the West Siberian Basin Province, Russia, 2008

The U.S. Geological Survey (USGS) recently assessed the undiscovered oil and gas potential of the West Siberian Basin Province in Russia as part of the USGS Circum-Arctic Resource Appraisal program. This province is the largest petroleum basin in the world and has an areal extent of about 2.2 million square kilometers. It is a large rift-sag feature bounded to the west by the Ural fold belt, to the north by the Novaya Zemlya fold belt and North Siberian Sill, to the south by the Turgay Depression and Altay-Sayan fold belt, and to the east by the Yenisey Ridge, Turukhan-Igarka uplift, Yenisey-Khatanga Basin, and Taimyr High. The West Siberian Basin Province has a total discovered oil and gas volume of more than 360 billion barrels of oil equivalent (Ulmishek, 2000). Exploration has led to the discovery of tens of giant oil and gas fields, including the Urengoy gas field with more than 3500 trillion cubic feet of gas reserves and Samotlar oil field with reserves of nearly 28 billion barrels of oil (Ulmishek, 2003). This report summarizes the results of a reassessment of the undiscovered oil and gas potential of that part of the province north of the Arctic Circle; a previous assessment that included the entire province was completed in 2000 (Ulmishek, 2000). The total petroleum system (TPS) and assessment units (AU) defined by the USGS for the assessments in 2000 were adopted for this assessment. However, only those parts of the Aus lying wholly or partially north of the Arctic Circle were assessed for this study.

West Siberian Basin Province↗
USGS2007

Thermal maturation history of the Wilcox group (Paleocene-Eocene), Texas: Results of regional-scale multi-1D modeling

The thermal maturation history of the Paleocene-Eocene Wilcox Group has been reconstructed based on burial history models of 53 wells in the Texas coastal plain. This modeling study has been conducted in conjunction with a geologically based assessment of the oil and gas resources in Cenozoic strata of the Gulf of Mexico coastal plain and state waters. In the onshore Texas coastal plain, coals and organic-rich shales, predominantly of terrestrial origin, within the Wilcox Group are the primary source of oil ( Wenger et al. , 1994 ) as well as a source of gas. The Wilcox, however, is modeled as a single unit, without subdivision into source rock and non-source rock intervals. Generation of oil from Type III kerogen within the Wilcox Group is modeled using hydrous pyrolysis reaction kinetic parameters (Lewan, M.D., written communication, 2006). Gas generation from Type III kerogen is represented using calculated Ro values. The models are calibrated with bottom hole temperature ( BHT ), and vitrinite reflectance ( Ro % ) data for the Wilcox Group. Ro data from near-coastal sites have been selected to minimize the possible effects of uplift and erosion and then composited to give a regional Ro depth trend. Model calculations for the study area, the onshore Texas coastal plain, indicate that downdip portions of the basal Wilcox had reached sufficient thermal maturity to generate hydrocarbons by early Eocene (~50 Ma). This relatively early maturation is explained by rapid sediment accumulation in the early Tertiary combined with the reaction kinetic parameters used in the models. Thermal maturation increases through time with increasing burial depth and temperature, gradually moving the maturation front updip. At present day, hydrocarbon generation is complete in the downdip Wilcox within the study area but is currently ongoing in the updip portions of the formation.

Texas↗
USGS2004

Petroleum generation and migration in the Mesopotamian Basin and Zagros Fold Felt of Iraq: Results from a basin-modeling study

A regional 3-D total petroleum-system model was developed to evaluate petroleum generation and migration histories in the Mesopotamian Basin and Zagros fold belt in Iraq. The modeling was undertaken in conjunction with Middle East petroleum assessment studies conducted by the USGS. Regional structure maps, isopach and facies maps, and thermal maturity data were used as input to the model. The oil-generation potential of Jurassic source-rocks, the principal known source of the petroleum in Jurassic, Cretaceous, and Tertiary reservoirs in these regions, was modeled using hydrous pyrolysis (Type II-S) kerogen kinetics. Results showed that oil generation in source rocks commenced in the Late Cretaceous in intrashelf basins, peak expulsion took place in the late Miocene and Pliocene when these depocenters had expanded along the Zagros foredeep trend, and generation ended in the Holocene when deposition in the foredeep ceased. The model indicates that, at present, the majority of Jurassic source rocks in Iraq have reached or exceeded peak oil generation and most rocks have completed oil generation and expulsion. Flow-path simulations demonstrate that virtually all oil and gas fields in the Mesopotamian Basin and Zagros fold belt overlie mature Jurassic source rocks (vertical migration dominated) and are situated on, or close to, modeled migration pathways. Fields closest to modeled pathways associated with source rocks in local intrashelf basins were charged earliest from Late Cretaceous through the middle Miocene, and other fields filled later when compression-related traps were being formed. Model results confirm petroleum migration along major, northwest-trending folds and faults, and oil migration loss at the surface.

GeoArabia↗
USGS2003

The New Albany Shale petroleum system, Illinois basin - Data and map image archive from the material-balance assessment

The data files and explanations presented in this report were used to generate published material-balance approach estimates of amounts of petroleum 1) expelled from a source rock, and the sum of 2) petroleum discovered in-place plus that lost due to 3) secondary migration within, or leakage or erosion from a petroleum system. This study includes assessment of cumulative production, known petroleum volume, and original oil in place for hydrocarbons that were generated from the New Albany Shale source rocks. More than 4.00 billion barrels of oil (BBO) have been produced from Pennsylvanian-, Mississippian-, Devonian-, and Silurian-age reservoirs in the New Albany Shale petroleum system. Known petroleum volume is 4.16 BBO; the average recovery factor is 103.9% of the current cumulative production. Known petroleum volume of oil is 36.22% of the total original oil in place of 11.45 BBO. More than 140.4 BBO have been generated from the Upper Devonian and Lower Mississippian New Albany Shale in the Illinois Basin. Approximately 86.29 billion barrels of oil that was trapped south of the Cottage Grove fault system were lost by erosion of reservoir intervals. The remaining 54.15 BBO are 21% of the hydrocarbons that were generated in the basin and are accounted for using production data. Included in this publication are 2D maps that show the distribution of production for different formations versus the Rock-Eval pyrolysis hydrogen-indices (HI) contours, and 3D images that show the close association between burial depth and HI values.The primary vertical migration pathway of oil and gas was through faults and fractures into overlying reservoir strata. About 66% of the produced oil is located within the generative basin, which is outlined by an HI contour of 400. The remaining production is concentrated within 30 miles (50 km) outside the 400 HI contour. The generative basin is subdivided by contours of progressively lower hydrogen indices that represent increased levels of thermal maturity and generative capacity of New Albany Shale source rocks. The generative basin was also divided into seven oil-migration catchments. The catchments were determined using a surface-flow hydrologic model with contoured HI values as input to the model.

Illinois, Indiana↗
USGS2003

Origin of minerals in joint and cleat systems of the Pottsville Formation, Black Warrior basin, Alabama: Implications for coalbed methane generation and production

Coalbed methane is produced from naturally fractured strata in the lower Pennsylvanian Pottsville Formation in the eastern part of the Black Warrior basin , Alabama . Major fracture systems include orthogonal fractures, which consist of systematic joints in siliciclastic strata and face cleats in coal that strike northeast throughout the basin . Calcite and minor amounts of pyrite commonly fill joints in sandstone and shale and, less commonly, cleats in coal. Joint -fill calcite postdates most pyrite and is a weakly ferroan, coarse-crystalline variety that formed during a period of uplift and erosion late in the burial history. Pyrite forms fine to coarse euhedral crystals that line joint walls or are complexly intergrown with calcite. Stable-isotope data reveal large variations in the carbon isotope composition of joint - and cleat -fill calcite (-10.3 to +24.3 per mil Peedee belemnite [PDB]) but only a relatively narrow range in the oxygen-isotope composition of this calcite (-16.2 to -4.1 per mil PDB). Negative carbon values can be attributed to (super 13) C-depleted CO (sub 2) derived from the oxidation of organic matter, and moderately to highly positive carbon values can be attributed to bacterial methanogenesis. Assuming crystallization temperatures of 20-50 degrees C, most joint- and cleat-fill calcite precipitated from fluids with delta (super 18) O ratios ranging from about -11 to +2 per mil standard mean ocean water (SMOW). Uplift and unroofing since the Mesozoic led to meteoric recharge of Pottsville strata and development of freshwater plumes that were fed by meteoric recharge along the structurally upturned, southeastern margin of the basin. Influxes of fresh water into the basin via faults and coalbeds facilitated late-stage bacterial methanogenesis, which accounts for the high gas content in coal and the carbonate cementation of joints and cleats. Diagenetic and epigenetic minerals can affect the transmissivity and storage capacity of joints and cleats, and they appear to contribute significantly to interwell heterogeneity in the Pottsville Formation. In highly productive coalbed methane fields, joint- and cleat-fill calcite have strongly positive delta (super 13) C values, whereas calcite fill has lower delta (super 13) C values in fields that are shut in or abandoned. Petrographic analysis and stable-isotope geochemistry of joint- and cleat-fill cements provide insight into coalbed methane reservoir quality and the nature and extent of reservoir compartmentalization, which are important factors governing methane production.

American Association of Petroleum Geologists Bulle↗
USGS2002

Material-balance assessment of the New Albany-Chesterian petroleum system of the Illinois basin

The New Albany-Chesterian petroleum system of the Illinois basin is a well-constrained system from which petroleum charges and losses were quantified through a material-balance assessment. This petroleum system has nearly 90,000 wells penetrating the Chesterian section, a single New Albany Shale source rock accounting for more than 99% of the produced oil, well-established stratigraphic and structural frameworks, and accessible source rock samples at various maturity levels. A hydrogen index (HI) map based on Rock-Eval analyses of source rock samples of New Albany Shale defines the pod of active source rock and extent of oil generation. Based on a buoyancy-drive model, the system was divided into seven secondary-migration catchments. Each catchment contains a part of the active pod of source rock from which it derives a petroleum charge, and this charge is confined to carrier beds and reservoirs within these catchments as accountable petroleum, petroleum losses, or undiscovered petroleum. A well-constrained catchment with no apparent erosional or leakage losses is used to determine an actual petroleum charge from accountable petroleum and residual migration losses. This actual petroleum charge is used to calibrate the other catchments in which erosional petroleum losses have occurred. Petroleum charges determined by laboratory pyrolysis are exaggerated relative to the actual petroleum charge. Rock-Eval charges are exaggerated by a factor of 4-14, and hydrouspyrolysis charges are exaggerated by a factor of 1.7. The actual petroleum charge provides a more meaningful material balance and more realistic estimates of petroleum losses and remaining undiscovered petroleum. The total petroleum charge determined for the New Albany-Chesterian system is 78 billion bbl, of which 11.4 billion bbl occur as a accountable in place petroleum, 9 billion bbl occur as residual migration losses, and 57.6 billion bbl occur as erosional losses. Of the erosional losses, 40 billion bbl were lost from two catchments that have highly faulted and extensively eroded sections. Anomalies in the relationship between erosional losses and degree of erosion suggest there is potential for undiscovered petroleum in one of the catchments. These results demonstrate that a material-balance assessment of migration catchments provides a useful means to evaluate and rank areas within a petroleum system. The article provides methodologies for obtaining more realistic petroleum charges and losses that can be applied to less data-rich petroleum systems.

Illinois, Indiana, Kentucky↗
USGS2001

Diagenesis and fracture development in the Bakken Formation, Williston Basin: Implications for reservoir quality in the middle member

The middle member of the Bakken Formation is an attractive petroleum exploration target in the deeper part of the Williston Basin because it is favorably positioned with respect to source and seal units. Progressive rates of burial and minor uplift and erosion of this member led to a stable thermal regime and, consequently, minor variations in diagenesis across much of the basin. The simple diagenetic history recorded in sandstones and siltstones in the middle member can, in part, be attributed to the closed, low-permeability nature of the Bakken petroleum system during most of its burial history. Most diagenesis ceased in the middle member when oil entered the sandstones and siltstones in the Late Cretaceous. Most oil in the Bakken Formation resides in open, horizontal fractures in the middle member. Core analysis reveals that sandstones and siltstones associated with thick mature shales typically have a greater density of fractures than sandstones and siltstones associated with thin mature shales. Fractures were caused by superlithostatic pressures that formed in response to increased fluid volumes in the source rocks during hydrocarbon generation

North Dakota↗
USGS2000

Diagenesis and reservoir quality of the Upper Mississippian Aux Vases Sandstone, Illinois Basin

Conventional reservoir quality data for more than 300 wells provided by the Illinois and Indiana state geological surveys were analyzed to determine the factors governing porosity and permeability in the Upper Mississippian Aux Vases Sandstone, an important hydrocarbon-producing unit in the Illinois Basin. In addition, approximately 150 samples of the Aux Vases Sandstone were collected for mineralogical and geochemical analysis to reconstruct the burial and diagenetic history and to establish the timing of diagenesis relative to the entrapment of hydrocarbons. One aspect of the study involved linking inorganic and organic diagenesis to late Paleozoic tectonism and hydrothermal fluid-flow events in the region.

Illinois↗
USGS1998

Reservoir quality and diagenetic evolution of Upper Mississippian rocks in the Illinois Basin; influence of a regional hydrothermal fluid-flow event during late diagenesis

Conventional reservoir quality data for more than 300 wells provided by the Illinois and Indiana State Geological Surveys were analyzed to determine the factors governing porosity and permeability in the Upper Mississippian Bethel Sandstone and Cypress Sandstone, two of the principal producing units in the Illinois Basin. In addition, approximately 150 samples of the Bethel Sandstone-Cypress Sandstone interval from about 80 wells in the Illinois Basin were collected for mineralogical and geochemical analysis to reconstruct the burial and diagenetic history and to establish the timing of diagenesis relative to the entrapment of hydrocarbons. One aspect of the study involved linking inorganic and organic diagenesis to late Paleozoic tectonism and hydrothermal fluid-flow events in the region.

Professional Paper↗
USGS1997

Regional diagenetic patterns in the St. Peter Sandstone; implications for brine migration in the Illinois Basin

Diagenetic minerals and alteration patterns in the Ordovician St. Peter Sandstone, Illinois Basin, record varied hydrologic and chemical conditions during the basin?s long and complex geologic history. Major diagenetic events modifying the St. Peter Sandstone include (1) mechanical compaction, (2) early K-feldspar overgrowth and dolospar precipitation, (3) burial quartz, dolospar, anhydrite, and calcite cementation, and (4) carbonate-cement and K-feldspar grain dissolution. Radiometric age dates of authigenic K-feldspar and illite in combination with the reconstructed burial history of the St. Peter reveal that early-diagenetic K-feldspar and dolospar precipitated at shallow to moderate depths in the Devonian, whereas late-diagenetic quartz, dolospar, anhydrite, and calcite formed during deep burial in the Late Pennsylvanian to Early Permian. Stable-isotope geochemistry and fluid-inclusion paleothermometry suggest that burial cements precipitated from saline fluids over a wide temperature range. In the southern part of the basin, burial cements preserve a record of diagenetic effects that were in part controlled by fractures and hydrothermal-fluid circulation. Baroque dolospar cementation is the most significant of these effects.

Bulletin↗