Search USGS⌕ Search

Geology topics

Jane M. Hammarstrom

Publications and source records attributed to Jane M. Hammarstrom.

At least 37 records · Page 2Linked to original sources
USGS2017

Genetic and grade and tonnage models for sandstone-hosted roll-type uranium deposits, Texas Coastal Plain, USA

The coincidence of a number of geologic and climatic factors combined to create conditions favorable for the development of mineable concentrations of uranium hosted by Eocene through Pliocene sandstones in the Texas Coastal Plain. Here 254 uranium occurrences, including 169 deposits, 73 prospects, 6 showings and 4 anomalies, have been identified. About 80 million pounds of U 3 O 8 have been produced and about 60 million pounds of identified producible U 3 O 8 remain in place. The development of economic roll-type uranium deposits requires a source, large-scale transport of uranium in groundwater, and deposition in reducing zones within a sedimentary sequence. The weight of the evidence supports a source from thick sequences of volcanic ash and volcaniclastic sediment derived mostly from the Trans-Pecos volcanic field and Sierra Madre Occidental that lie west of the region. The thickest accumulations of source material were deposited and preserved south and west of the San Marcos arch in the Catahoula Formation. By the early Oligocene, a formerly uniformly subtropical climate along the Gulf Coast transitioned to a zoned climate in which the southwestern portion of Texas Coastal Plain was dry, and the eastern portion humid. The more arid climate in the southwestern area supported weathering of volcanic ash source rocks during pedogenesis and early diagenesis, concentration of uranium in groundwater and movement through host sediments. During the middle Tertiary Era, abundant clastic sediments were deposited in thick sequences by bed-load dominated fluvial systems in long-lived channel complexes that provided transmissive conduits favoring transport of uranium-rich groundwater. Groundwater transported uranium through permeable sandstones that were hydrologically connected with source rocks, commonly across formation boundaries driven by isostatic loading and eustatic sea level changes. Uranium roll fronts formed as a result of the interaction of uranium-rich groundwater with either (1) organic-rich debris adjacent to large long-lived fluvial channels and barrier–bar sequences or (2) extrinsic reductants entrained in formation water or discrete gas that migrated into host units via faults and along the flanks of salt domes and shale diapirs. The southwestern portion of the region, the Rio Grande embayment, contains all the necessary factors required for roll-type uranium deposits. However, the eastern portion of the region, the Houston embayment, is challenged by a humid environment and a lack of source rock and transmissive units, which may combine to preclude the deposition of economic deposits. A grade and tonnage model for the Texas Coastal Plain shows that the Texas deposits represent a lower tonnage subset of roll-type deposits that occur around the world, and required aggregation of production centers into deposits based on geologic interpretation for the purpose of conducting a quantitative mineral resource assessment.

Texas↗
USGS2017

Undiscovered porphyry copper resources in the Urals—A probabilistic mineral resource assessment

A probabilistic mineral resource assessment of metal resources in undiscovered porphyry copper deposits of the Ural Mountains in Russia and Kazakhstan was done using a quantitative form of mineral resource assessment. Permissive tracts were delineated on the basis of mapped and inferred subsurface distributions of igneous rocks assigned to tectonic zones that include magmatic arcs where the occurrence of porphyry copper deposits within 1 km of the Earth's surface are possible. These permissive tracts outline four north-south trending volcano-plutonic belts in major structural zones of the Urals. From west to east, these include permissive lithologies for porphyry copper deposits associated with Paleozoic subduction-related island-arc complexes preserved in the Tagil and Magnitogorsk arcs, Paleozoic island-arc fragments and associated tonalite-granodiorite intrusions in the East Uralian zone, and Carboniferous continental-margin arcs developed on the Kazakh craton in the Transuralian zone. The tracts range from about 50,000 to 130,000 km 2 in area. The Urals host 8 known porphyry copper deposits with total identified resources of about 6.4 million metric tons of copper, at least 20 additional porphyry copper prospect areas, and numerous copper-bearing skarns and copper occurrences. Probabilistic estimates predict a mean of 22 undiscovered porphyry copper deposits within the four permissive tracts delineated in the Urals. Combining estimates with established grade and tonnage models predicts a mean of 82 million metric tons of undiscovered copper. Application of an economic filter suggests that about half of that amount could be economically recoverable based on assumed depth distributions, availability of infrastructure, recovery rates, current metals prices, and investment environment.

Urals↗
USGS2017

New method to integrate remotely sensed hydrothermal alteration mapping into quantitative mineral resource assessments

Hydrothermal alteration data mapped using the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) were compiled into hydrothermal alteration polygons for use in an assessment of porphyry copper mineral resource potential in the southwestern United States. Hydrothermal alteration polygons along with geochemistry, gravity and magnetic, lithologic, and deposit and prospects data were compiled in a GIS to produce a quantitative set of physical properties for each polygon that were effectively used in making estimates of undiscovered deposits for each permissive tract. Results show a higher estimate of potential undiscovered deposits (17 vs 14) for permissive tracts when ASTER alteration data were used in the assessment.

Conference Paper↗
USGS2016

Spatial database for a global assessment of undiscovered copper resources: Chapter Z in Global mineral resource assessment

As part of the first-ever U.S. Geological Survey global assessment of undiscovered copper resources, data common to several regional spatial databases published by the U.S. Geological Survey, including one report from Finland and one from Greenland, were standardized, updated, and compiled into a global copper resource database. This integrated collection of spatial databases provides location, geologic and mineral resource data, and source references for deposits, significant prospects, and areas permissive for undiscovered deposits of both porphyry copper and sediment-hosted copper. The copper resource database allows for efficient modeling on a global scale in a geographic information system (GIS) and is provided in an Esri ArcGIS file geodatabase format.

Scientific Investigations Report↗
USGS2016

Abiotic raw-materials in life cycle impact assessments: An emerging consensus across disciplines

This paper captures some of the emerging consensus points that came out of the workshop “Mineral Resources in Life Cycle Impact Assessment: Mapping the path forward”, held at the Natural History Museum London on 14 October 2015: that current practices rely in many instances on obsolete data, often confuse resource depletion with impacts on resource availability, which can therefore provide inconsistent decision support and lead to misguided claims about environmental performance. Participants agreed it would be helpful to clarify which models estimate depletion and which estimate availability, so that results can be correctly reported in the most appropriate framework. Most participants suggested that resource availability will be more meaningfully addressed within a comprehensive Life Cycle Sustainability Assessment framework rather than limited to an environmental Life Cycle Assessment or Footprint. Presentations from each of the authors are available for download.

Resources↗
USGS2016

Copper speciation in variably toxic sediments at the Ely Copper Mine, Vermont, United States

At the Ely Copper Mine Superfund site, Cu concentrations exceed background values in both streamwater (160–1200 times) and sediments (15–79 times). Previously, these sediment samples were incubated with laboratory test organisms, and they exhibited variable toxicity for different stream sites. In this study we combined bulk- and microscale techniques to determine Cu speciation and distribution in these contaminated sediments on the basis of evidence from previous work that Cu was the most important stressor in this environment and that variable observed toxicity could have resulted from differences in Cu speciation. Copper speciation results were similar at microscopic and bulk scales. The major Cu species in the more toxic samples were sorbed or coprecipitated with secondary Mn (birnessite) and Fe minerals (jarosite and goethite), which together accounted for nearly 80% of the total Cu. The major Cu species in the less toxic samples were Cu sulfides (chalcopyrite and a covellite-like phase), making up about 80–95% of the total Cu, with minor amounts of Cu associated with jarosite or goethite. These Cu speciation results are consistent with the toxicity results, considering that Cu sorbed or coprecipitated with secondary phases at near-neutral pH is relatively less stable than Cu bound to sulfide at lower pH. The more toxic stream sediment sites were those that contained fewer detrital sulfides and were upstream of the major mine waste pile, suggesting that removal and consolidation of sulfide-bearing waste piles on site may not eliminate all sources of bioaccessible Cu.

Vermont↗
USGS2016

Relationship between porphyry systems, crustal preservation levels, and amount of exploration in magmatic belts of the Central Tethys Region

Tectonic, geologic, geochemical, geochronologic, and ore deposit data from the U.S. Geological Survey-led assessment of 26 porphyry belts identified in the central Tethys region of Turkey, the Caucasus, Iran, western Pakistan, and southern Afghanistan relate porphyry mineralization to the tectonomagmatic evolution of the region and associated subduction and postsubduction processes. However, uplift, erosion, subsidence, and burial of porphyry systems, as well as post-mineral deformation, also played an essential role in shaping the observed metallogenic patterns. We present a methodology that systematically evaluates the relationship between the level of erosion, the extent of cover, and the number of known porphyry occurrences in porphyry belts. Porphyry belts that exhibit coeval volcanic-to-plutonic rock aerial ratios between 33 and 66 and limited cover contain numerous identified porphyry occurrences. These belts are relatively well explored because porphyry systems are not eroded or buried. Porphyry belts with volcanic-to-plutonic ratios that are greater than 66, but are modestly covered, contain fewer identified porphyry occurrences. Current exploration in these belts is increasingly identifying porphyry systems under associated epithermal deposits. Porphyry belts that show volcanic-to-plutonic ratios that are greater than 66, but are extensively covered, contain few identified porphyry occurrences. These belts have not been extensively explored but have potential for discoveries under cover. Deformed porphyry belts exhibit variable volcanic-to-plutonic ratios that are typically below 33, but can be as high as 60. Commonly, these deformed belts are extensively covered. Exploration efforts for porphyry deposits in these variably exhumed belts have been limited. Exploration has resulted in the identification of 62.7 million tonnes (Mt) of copper, 2.0 Mt of molybdenum, and 4.200 t of gold in the 45 porphyry deposits contained in the 26 porphyry belts of the region: (1) 54.7 Mt of copper (87% of total), 1.74 Mt of molybdenum (87%), and 3,370 t of gold (80%) occur in the 25 deposits of the four porphyry belts that exhibit coeval volcanic-to-plutonic ratios between 33 and 66 and limited cover; (2) 5.44 Mt of copper (9%), 0.148 Mt of molybdenum (7%), and 581 t of gold (14%) are contained in the 11 deposits of the 11 porphyry belts that display volcanic-to-plutonic ratios greater than 66 and modest cover; (3) 2.08 Mt of copper (3%), 0.110 Mt of molybdenum (6%), and 244 t of gold (6%) occur in the seven deposits of the three porphyry belts that have volcanic-to-plutonic ratios that are greater than 66 and extensive cover; and (4) 0.388 Mt of copper (1%), 0.006 Mt of molybdenum (<<1%), and 6 t of gold (<<1%) are contained in the two deposits of the eight deformed and covered porphyry belts with variable but typically low volcanic-to-plutonic ratios. The central Tethys region is receiving considerable exploration attention. It hosts the Kadjaran (4.6 Mt Cu), Sungun (5.1 Mt Cu), Sar Cheshmeh (8.9 Mt Cu), and Reko Diq (23.0 Mt Cu) world-class porphyry deposits. Continued exploration for porphyry deposits in the region will likely lead to new discoveries in known porphyry belts, particularly under cover and below high- and intermediate-sulfidation epithermal systems.

Caucasus, central Tethys region↗
USGS2015

Porphyry copper assessment of the Tethys region of western and southern Asia: Chapter V in Global mineral resource assessment

A probabilistic mineral resource assessment of undiscovered resources in porphyry copper deposits in the Tethys region of western and southern Asia was carried out as part of a global mineral resource assessment led by the U.S. Geological Survey (USGS). The purpose of the study was to delineate geographic areas as permissive tracts for the occurrence of porphyry copper deposits at a scale of 1:1,000,000 and to provide probabilistic estimates of amounts of copper likely to be contained in undiscovered porphyry copper deposits in those tracts. The team did the assessment using the USGS three-part form of mineral resource assessment, which is based on (1) mineral deposit and grade-tonnage models constructed from known deposits as analogs for undiscovered deposits, (2) delineation of permissive tracts based on geoscientific information, and (3) estimation of numbers of undiscovered deposits. The assessment area includes the Asian part of Turkey and Georgia, Armenia, Azerbaijan, Iran, western Pakistan, and southwestern Afghanistan. Selected tracts also extend marginally into southwesternmost Russia and northeasternmost Iraq. This region is located in the central part of the larger Tethyan Eurasian Metallogenic Belt, which extends from western Europe to eastern Asia. Mining in this part of the Tethyan Eurasian Metallogenic Belt has occurred for thousands of years; in 2011 the region produced 420,000 metric tons (t) of copper (2.6 percent of global production), 8,300 t of molybdenum (3 percent), and 29,600 kilograms of gold (1 percent). The assessment team defined 26 tracts permissive for Late Triassic to Holocene porphyry copper-molybdenum and porphyry copper-gold deposits. Permissive tracts range in extent from 2,960 to 194,000 square kilometers (km 2 ) and cover a total area of 924,000 km 2 . Younger tracts overlap older tracts in several areas. Three permissive tracts include sub-tracts in order to separate tract segments on the basis of geography, data quality, or likelihood of occurrence of undiscovered deposits. About 65 percent of all known porphyry sites occur in only five tracts, which also host most of the identified copper resources. In terms of tectonic setting, 58 percent of the permissive tracts are related to continental arcs; 19 percent to island arcs or back arcs; and 24 percent to postcollisional settings. Of the known porphyry copper deposits, subequal fractions are spread among these three settings. The spatial distribution of known porphyry deposits and prospects is also related to the level of erosion. Magmatic belts with numerous known porphyry sites exhibit subequal areas of coeval plutonic and volcanic units and lesser amounts of cover rocks. Belts with fewer known porphyry sites display either high or low volcanic-to-plutonic ratios and (or) greater cover, indicating crustal levels that are too shallow or too deep for exposure of porphyry deposits. Probabilistic estimates of numbers of undiscovered porphyry copper deposits were made for 18 of the 26 tracts. The undiscovered porphyry copper endowment for 8 tracts is discussed qualitatively. The assessment estimates that the Tethys region contains 47 undiscovered deposits within 1 kilometer of the surface. Probabilistic estimates of numbers of undiscovered deposits were combined with grade and tonnage models in a Monte Carlo simulation to estimate probable amounts of contained metal. The 47 undiscovered deposits are estimated to contain a mean of 180 million metric tons (Mt) of copper distributed among the 18 tracts for which probabilistic estimates were made, in addition to the 62 Mt of copper already identified in the 42 known porphyry deposits in the study area. Results of Monte Carlo simulations show that 80 percent of the estimated undiscovered porphyry copper resources in the Tethys region are located in four tracts or sub-tracts.

Scientific Investigations Report↗
USGS2015

Porphyry copper assessment of northeast Asia: Far East Russia and northeasternmost China: Chapter W in Global mineral resource assessment

The U.S. Geological Survey assesses resources (mineral, energy, water, environmental, and biologic) at regional, national, and global scales to provide science in support of land management and decision making. Mineral resource assessments provide a synthesis of available information about where mineral deposits are known and suspected to be in the Earth&rsquo;s crust, which commodities may be present, and estimates of amounts of resources in undiscovered deposits. A probabilistic mineral resource assessment of undiscovered resources associated with porphyry copper deposits in northeast Asia&mdash;composed mainly of Far East Russia and a small part of northeasternmost China&mdash;was completed as part of a global mineral resource assessment. Porphyry copper deposits are the main source of copper globally. Russia is an important source of copper, consistently ranking as 6th, 7th, or 8th in world production since 2000, and ranked 7th in 2014. Most of this production has been from magmatic copper-nickel-platinum-group element, volcanogenic massive sulfide, and sediment-hosted copper deposit types. The purpose of the assessment was to (1) compile a database of known deposits and significant prospects, (2) delineate permissive areas (tracts) for undiscovered porphyry copper deposits that may be present in the upper kilometer of the Earth&rsquo;s crust, and (3) provide probabilistic estimates of amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in undiscovered porphyry copper deposits in the tracts. The assessment was completed by the U.S. Geological Survey in collaboration with geologists from the Russian Academy of Sciences and industry consultants. The database of known deposits, significant prospects, and prospects includes an inventory of mineral resources in two known porphyry copper deposits, as well as key characteristics derived from available exploration reports for 70 significant porphyry copper prospects and 86 other prospects. Resource and exploration and development activity are updated with information current through February 2013.

Scientific Investigations Report↗
USGS2015

Porphyry copper assessment of the Central Asian Orogenic Belt and eastern Tethysides: China, Mongolia, Russia, Pakistan, Kazakhstan, Tajikistan, and India: Chapter X in Global mineral resource assessment

The U.S. Geological Survey collaborated with international colleagues to assess undiscovered resources in porphyry copper deposits in the Central Asian Orogenic Belt and eastern Tethysides. These areas host 20 known porphyry copper deposits, including the world class Oyu Tolgoi deposit in Mongolia that was discovered in the late 1990s. The study area covers major parts of the world&rsquo;s largest orogenic systems. The Central Asian Orogenic Belt is a collage of amalgamated Precambrian through Mesozoic terranes that extends from the Ural Mountains in the west nearly to the Pacific Coast of Asia in the east and records the evolution and final closure of the Paleo-Asian Ocean in Permian time. The eastern Tethysides, the orogenic belt to the south of the Central Asian Orogenic Belt, records the evolution of another ancient ocean system, the Tethys Ocean. The evolution of these orogenic belts involved magmatism associated with a variety of geologic settings appropriate for formation of porphyry copper deposits, including subduction-related island arcs, continental arcs, and collisional and postconvergent settings. The original settings are difficult to trace because the arcs have been complexly deformed and dismembered by younger tectonic events. Twelve mineral resource assessment tracts were delineated to be permissive for the occurrence of porphyry copper deposits based on mapped and inferred subsurface distributions of igneous rocks of specific age ranges and compositions. These include (1) nine Paleozoic tracts in the Central Asian Orogenic Belt, which range in area from about 60,000 to 800,000 square kilometers (km 2 ); (2) a complex area of about 400,000 km 2 on the northern margin of the Tethysides, the Qinling-Dabie tract, which spans central China and areas to the west, encompassing Paleozoic through Triassic igneous rocks that formed in diverse settings; and (3) assemblages of late Paleozoic and Mesozoic rocks that define two other tracts in the Tethysides, the 100,000 km 2 Jinsajiang tract and the 300,000 km 2 Tethyan-Gangdese tract. Assessment participants evaluated applicable grade and tonnage models and estimated numbers of undiscovered deposits at different confidence levels for each permissive tract. The estimates were then combined with the selected grade and tonnage models using Monte Carlo simulations to generate probabilistic estimates of undiscovered resources. Additional resources in extensions of deposits with identified resources were not specifically evaluated. Assessment results, presented in tables and graphs, show amounts of metal and rock in undiscovered deposits at selected quantile levels of probability (0.95, 0.9, 0.5, 0.1, and 0.05 confidence levels), as well as the arithmetic mean and associated standard deviations and variances for each tract. This assessment estimated a total of 97 undiscovered porphyry copper deposits within the assessed permissive tracts. This represents nearly five times the 20 known deposits. Predicted mean resources that could be associated with these undiscovered deposits are about 370,000,000 metric tons (t) of copper, 10,000 t of gold, 7,700,000 t of molybdenum, and 120,000 t of silver. The assessment area is estimated to contain about five times as much copper in undiscovered deposits as has been identified to date. This report includes a summary of the data used in the assessment, a brief overview of the geologic framework of the area, descriptions of permissive tracts and known deposits, maps, and tables. A geographic information system database that accompanies this report includes the tract boundaries and known porphyry copper deposits, significant prospects, and prospects. Assessments of overlapping younger rocks and adjacent areas are included in separate reports available on-line at http://minerals.usgs.gov/global/ .

Scientific Investigations Report↗
USGS2014

Estimate of undiscovered copper resources of the world, 2013

Using a geology-based assessment methodology, the U.S. Geological Survey estimated a mean of 3,500 million metric tons (Mt) of undiscovered copper among 225 tracts around the world. Annual U.S. copper consumption is 2 Mt; global consumption is 20 Mt. The USGS assessed undiscovered copper in two deposit types that account for about 80 percent of the world's copper supply. Results of the assessment are provided by deposit type for 11 regions. Approximately 50 percent of the global total occurs in South America, South Central Asia and Indochina, and North America combined.

Fact Sheet↗
USGS2014

Porphyry copper assessment of Central America and the Caribbean Basin

Mineral resource assessments provide a synthesis of available information about distributions of mineral deposits in the Earth&rsquo;s crust. The U.S. Geological Survey prepared a probabilistic mineral resource assessment of undiscovered resources in porphyry copper deposits in Central America and the Caribbean Basin in collaboration with geoscientists from academia and the minerals industry. The purpose of the study was to (1) delineate permissive areas (tracts) for undiscovered porphyry copper deposits within 1 kilometer of the surface at a scale of 1:1,000,000; (2) provide a database of known porphyry copper deposits and significant prospects; (3) estimate numbers of undiscovered deposits within the permissive tracts; and (4) provide probabilistic estimates of amounts of copper, molybdenum, gold, and silver that could be contained in undiscovered deposits. The assessment was done using a three-part mineral resource assessment based on established mineral deposit models. Permissive tracts were delineated based primarily on distributions of mapped igneous rocks related to magmatic arcs that formed in tectonic settings associated with convergent plate margins. Five permissive tracts were delineated: the Early Cretaceous through Eocene Santiago tract, the Late Cretaceous through Oligocene Chortis tract, the Paleocene through Oligocene Dari&eacute;n tract, the Miocene and Pliocene Cocos tract, and the Eocene to Holocene Lesser Antilles tract. These tracts range in size from about 3,000 to about 204,000 square kilometers. Probabilistic estimates of numbers of undiscovered deposits were made for all tracts. To estimate the number of undiscovered porphyry copper deposits, data on known mineral deposits, prospects, and occurrences were considered along with mapped alteration zones, local stream-sediment geochemistry, exploration history, descriptive deposit models, and grade and tonnage models. Most porphyry copper exploration in Central America and the Caribbean Basin has focused on Panama and on the exposed Cretaceous to Eocene central Cordilleran arc that extends from Cuba and Jamaica through Haiti and the Dominican Republic to Puerto Rico and the Virgin Islands. Interest in gold has prompted exploration of historical precious-metal prospects and small mines, some of which may represent high-sulfidation epithermal systems or skarns overlying, or adjacent to, porphyry copper systems. This assessment estimated a total mean of 37 undiscovered porphyry copper deposits within the assessed permissive tracts in Central America and the Caribbean Basin. This represents more than five times the seven known deposits. Predicted mean (arithmetic) resources that could be associated with these undiscovered deposits are about 130 million metric tons of copper and about 5,200 metric tons of gold, as well as byproduct molybdenum and silver. The reported identified resources for the seven known deposits total about 39 million metric tons of copper and about 930 metric tons of gold. The assessment area is estimated to contain nearly four times as much copper and six times as much gold in undiscovered porphyry copper deposits as has been identified to date.

Scientific Investigations Report↗
USGS2014

Porphyry copper assessment of eastern Australia

The U.S. Geological Survey (USGS) conducts national and global assessments of resources (mineral, energy, water, and biologic) to provide science in support of decision making. Mineral resource assessments provide syntheses of available information about where mineral deposits are known and suspected to occur in the Earth&rsquo;s crust and which commodities may be present, together with estimates of amounts of resources that may be present in undiscovered deposits. The USGS collaborated with geologists of the Geological Survey of New South Wales and Geoscience Australia (formerly the Australian Geological Survey Organisation) on an assessment of Phanerozoic-age porphyry copper resources in Australia. Porphyry copper deposits contain about 11 percent of the identified copper resources in Australia. This study addresses resources of known porphyry copper deposits and expected resources of undiscovered porphyry copper deposits in eastern Australia. A three-part form of assessment was used for estimation of undiscovered resources. Using this method, four tracts were delineated that are permissive for porphyry copper deposits. A probabilistic estimate of the expected number of deposits in each tract was prepared on the basis of existing information about geology, geochemistry, geophysics, exploration history, and mineral occurrences. Monte Carlo simulation was used to combine the estimated number of deposits with an appropriate model of grade and tonnage for porphyry copper deposits to provide a probabilistic estimate of metal content and total tonnage for undiscovered deposits. The Delamerian permissive tract comprises igneous rocks of Cambrian age in the Delamerian Orogen, which borders the western margin of the Tasmanides. The Delamerian tract contains no known porphyry copper deposits, but the Adelaide sub-tract, one of three sub-tracts that compose the Delamerian tract, contains four porphyry copper prospects. The Adelaide sub-tract is estimated to contain 2.5&plusmn;2.2 undiscovered deposits in an area of about 50,700 square kilometers. The Macquarie permissive tract comprises volcanic, volcaniclastic, and minor exposed intrusive igneous rocks of the Macquarie Arc. The nine known deposits in this tract are now estimated to contain a total of about 13.5 million metric tons of copper and 1,700 metric tons of gold. This tract is estimated to contain 6.9&plusmn;3.5 undiscovered deposits for a total of about 16 deposits in an area of about 41,500 square kilometers. The Yeoval permissive tract includes subequal areas of permissive volcanic and intrusive rocks of Silurian to Devonian age exposed in and around the Cowra-Buchan Rift System, which overlaps the previously accreted Macquarie Arc. The Yeoval tract contains one porphyry copper deposit and several porphyry copper prospects. This tract is estimated to contain 1.3&plusmn;0.75 undiscovered porphyry copper deposits, for a total of about 2 expected deposits in an area of about 53,200 square kilometers. The East Tasmanide permissive tract includes a semi-continuous belt of plutonic and subordinate volcanic rocks along the eastern margins of Queensland and northeastern New South Wales. The East Tasmanide tract contains 14 known porphyry copper deposits and many porphyry copper prospects, which are all in the Central sub-tract. This sub-tract is expected to contain 4.8&plusmn;3.3 undiscovered porphyry copper deposits, for a total of about 19 deposits in an area of about 291,000 square kilometers. This assessment estimates that 15 undiscovered deposits contain an arithmetic mean of ~21 million metric tons or more of copper in four tracts, in addition to the 24 known porphyry copper deposits that contain identified resources of ~16 million metric tons of copper. In addition to copper, the mean expected amount of undiscovered byproduct gold predicted by the simulation is ~1,500 metric tons. The probability associated with these arithmetic means is on the order of 30 percent. Median expected amounts of metals predicted by the simulations may be ~50 percent lower than mean estimates.

Scientific Investigations Report↗
USGS2014

Porphyry copper assessment of western Central Asia

The U.S. Geological Survey conducted an assessment of resources associated with porphyry copper deposits in the western Central Asia countries of Kyrgyzstan, Uzbekistan, Kazakhstan, and Tajikistan and the southern Urals of Kazakhstan and Russia as part of a global mineral resource assessment. The purpose of the study was to (1) delineate permissive areas (tracts) for undiscovered porphyry copper deposits; (2) compile a database of known porphyry copper deposits and significant prospects; (3) where data permit, estimate numbers of undiscovered deposits within those permissive tracts; and (4) provide probabilistic estimates the amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in those undiscovered deposits. Western Central Asia, a region diverse in its geologic complexity, is situated north of the Tarim and North China tectonic blocks and sandwiched between the East European and Siberian cratons. The Ural Mountains form the western margin of the region; the southern margin is formed by the high-standing ranges that make up the Tian Shan mountain range in the border regions of Kazakhstan, Kyrgyzstan, and western China, where the effects of collisional tectonics are well displayed. The tectonic collage that makes up the core of western Central Asia is perhaps the geologically least understood part of the region. There is broad agreement that the early Paleozoic is made up of tectonically juxtaposed blocks that vary from Precambrian-cored microcontinents to magmatic arc and related complexes to subduction-related accretionary complexes. The rudiments of an incipient, contiguous single Kazakhstan block were formed by the end of the Silurian. In the middle to late Paleozoic, the block was unconformably superposed by two large, nested magmatic-arc belts, one Devonian, the other Carboniferous. Both magmatic-arc complexes were folded into a horseshoe-shaped, southeast-opening orocline in response to the final collisions of the various surrounding cratonic blocks with the Kazakhstan block. Additional deformation in the upper Cenozoic derived from the collision of India and China significantly redistributed fragments of the various mosaicked blocks, particularly in the central and southern parts of the western Central Asian region. Porphyry copper deposits are associated with many of the magmatic-arc fragments and belts throughout the geologically complex region, and economically important deposits are found in arc sequences of all Paleozoic Periods. The economically most productive arcs are Carboniferous. The assessment includes a discussion of the tectonic and geologic setting of porphyry copper deposits in western Central Asia (chapter 1), an application of remote sensing data for hydrothermal alteration mapping as a tool for porphyry copper assessment in the region (chapter 2), and a probabilistic assessment of undiscovered porphyry copper resources in four areas that represent Ordovician and Late Paleozoic (Carboniferous-Permian) magmatic arcs (chapter 3). The principal litho-tectonic terrane concept used to delineate permissive tracts was that of a magmatic arc that formed in the subduction boundary zone above a subducting plate. Eight permissive tracts are delineated on the basis of mapped and inferred subsurface distributions of igneous rocks assigned to magmatic arcs of specified age ranges that define areas where the occurrence of porphyry copper deposits within 1 kilometer of the Earth&rsquo;s surface is possible. These tracts range in area from about 8,000 to 200,000 square kilometers and host 18 known porphyry copper deposits that contain about 54 million metric tons of copper. Available data included geologic maps, the distribution of significant porphyry copper occurrences and potentially related deposit types, the distribution of hydrothermal alteration patterns that are consistent with porphyry copper mineralization, and information on possible subsurface extensions of permissive rocks. On the basis of analyses of these data, the assessment team estimated a mean of 25 undiscovered porphyry copper deposits for the study area. Estimates of numbers of undiscovered deposits were combined with grade and tonnage models in a Monte Carlo simulation to yield a mean estimate of 95 million metric tons of copper in undiscovered porphyry copper deposits; this represents about twice the amount of identified porphyry copper resources (54 million metric tons). Detailed descriptions of each permissive tract, including the rationales for delineation and assessment, are given in appendixes, along with a geographic information system (GIS) that includes permissive tract boundaries, point locations of known porphyry copper deposits and significant occurrences, and hydrothermal alteration data based on analysis of remote sensing data.

Ural Mountains↗
USGS2014

Porphyry copper assessment of East and Southeast Asia: Philippines, Taiwan (Republic of China), Republic of Korea (South Korea), and Japan

The U.S. Geological Survey collaborated with member countries of the Coordinating Committee for Geoscience Programmes in East and Southeast Asia (CCOP) on an assessment of the porphyry copper resources of East and Southeast Asia as part of a global mineral resource assessment. The assessment covers the Philippines in Southeast Asia, and the Republic of Korea (South Korea), Taiwan (Province of China), and Japan in East Asia. The Philippines host world class porphyry copper deposits, such as the Tampakan and Atlas deposits. No porphyry copper deposits have been discovered in the Republic of Korea (South Korea), Taiwan (Province of China), or Japan. Thirteen geographic areas were delineated as tracts that are permissive for porphyry copper deposits in the assessed area. Individual tracts range from about 3,000 to 100,000 square kilometers in area. Permissive tracts are delineated on the basis of mapped distributions of igneous rocks of specific age ranges that define subduction-related magmatic arcs or magmatic belts that might contain porphyry copper deposits. Most of these magmatic arcs are subduction related, although some porphyry deposits and prospects are present in back-arc or poorly understood tectonic settings. Maps at various scales were used in the compilation; however, the final tract boundaries are intended for use at a scale of 1:1,000,000. Numbers of undiscovered deposits were estimated at different levels of confidence for 10 permissive tracts in the Philippines including one area that extends to eastern Taiwan (Republic of China); permissive tracts in South Korea and Japan are discussed qualitatively. Estimates of numbers of undiscovered deposits were combined with grade and tonnage models using Monte Carlo simulation to estimate amounts of undiscovered resources. Grades and tonnages of known porphyry copper deposits in the study area were compared with global grade and tonnage models to determine the appropriate model for simulation of undiscovered resources. Most of the known deposits are best described as copper-gold subtypes of porphyry copper deposits. For some permissive tracts, a general porphyry copper-gold-molybdenum model was used. Thirty-eight porphyry copper deposits are known in the Philippines; the mean number of undiscovered deposits was estimated to be 28. Mean (arithmetic) resources that could be associated with the undiscovered deposits are 90 million metric tons of copper and 5,800 metric tons of gold, as well as byproduct molybdenum and silver. Additional resources that could be discovered in extensions to known deposits were not evaluated. Assessment results, presented in tables and graphs, indicate expected amounts of total contained metal and mineralized rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each tract. The Philippines have a long history of porphyry exploration cycles and mine development, interrupted at times by political and social unrest, environmental concerns, and natural disasters. Changes in mining laws within the region and the recent high price of gold on the world market have prompted renewed interest in porphyry copper deposits in the region. South Korea and Japan have been thoroughly explored for many types of mineral deposits. Available data suggest that the permissive rocks in South Korea typically are too deeply eroded to preserve porphyry copper deposits. Porphyry copper systems may be present in Japan, but are likely to lie at depths greater than the 1 kilometer from the surface protocol adopted for this study. Descriptions of the geologic basis for delineating each tract, the data used, the geologic criteria and rationale for the assessment, and results of the assessment are included in appendixes along with the description of a geographic information system (GIS) that includes tract boundaries, known porphyry copper deposits and significant prospects, and assessment results.

Scientific Investigations Report↗
USGS2013

Porphyry copper assessment of Southeast Asia and Melanesia: Chapter D in Global mineral resource assessment

The U.S. Geological Survey collaborated with member countries of the Coordinating Committee for Geoscience Programmes in East and Southeast Asia (CCOP) on an assessment of the porphyry copper resources of Southeast Asia and Melanesia as part of a global mineral resource assessment. The region hosts world-class porphyry copper deposits and underexplored areas that are likely to contain undiscovered deposits. Examples of known porphyry copper deposits include Batu Hijau and Grasberg in Indonesia; Panguna, Frieda River, and Ok Tedi in Papua New Guinea; and Namosi in Fiji. This assessment covers the countries of Cambodia, Indonesia, Lao People&rsquo;s Democratic Republic, Malaysia, Myanmar, Papua New Guinea, Singapore, Thailand, and parts of southeastern China, India, the Solomon Islands, Vanuatu, and Fiji. Twenty-two geographic areas were delineated as tracts that are permissive for porphyry copper deposits in Southeast Asia. Permissive tracts are grouped into four broadly defined geographic/geologic areas, as follows: (1) the Indochina Peninsula area, (2) Indonesian and Malaysian Islands, (3) New Guinea Island and Papuan New Guinea islands, and (4) Melanesia. Individual tracts range from less than 1,000 to more than 350,000 square kilometers in area. Permissive tracts are based on mapped and inferred subsurface (<1 kilometer depth) distributions of igneous rocks of specific age ranges that define magmatic arcs and magmatic belts that are likely to contain porphyry copper deposits. Most of these magmatic arcs are subduction-related, although some have porphyry-style deposits occurring in postcollisional and (or) poorly understood tectonic settings. Although maps at a variety of different scales were used in the compilation, the final tract boundaries are intended for use at a scale of 1:1,000,000. Global grade and tonnage models for porphyry copper deposits were evaluated. Most of the known deposits are best described as fitting the copper-gold (Cu-Au) subtype of porphyry copper deposit. For some permissive tracts, a general porphyry copper-gold-molybdenum (Cu-Au-Mo) model was used. Assessment participants estimated numbers of undiscovered deposits at different levels of confidence for most of the permissive tracts. These estimates were combined with grade and tonnage models using a Monte Carlo simulation to estimate undiscovered resources. Additional resources in extensions of deposits with identified resources were not evaluated. Assessment results, presented in tables and graphs, show mean amounts of metal and mineralized rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each tract. This assessment estimated a mean of 89 undiscovered porphyry copper deposits for the assessed permissive tracts in Southeast Asia and Melanesia. About 288 million metric tons (Mt) of copper and 18,000 metric tons (t) of gold, as well as byproduct molybdenum and silver, could be associated with undiscovered deposits. This represents about four times the number of deposits with identified resources (23) already discovered in Southeast Asia; reliable reported identified resources for those 23 deposits total 84 Mt of copper and 6,000 t of gold. Eleven permissive tracts have no known porphyry copper deposits with reported resources. Three of those 11 tracts lacked sufficient information for a probabilistic assessment and are discussed in qualitative terms. On a regional basis, both the Indochina Peninsula area and the Indonesian-Malaysian Islands area are estimated to contain about 10 times as much in place copper in undiscovered porphyry copper deposits as has been identified to date. For the New Guinea Island areas, the ratio of undiscovered to identified copper resources is about 2. Some parts of the region have a long history of porphyry exploration cycles and mine development, interrupted at times by political and social unrest, environmental concerns, and natural disasters. Changes in mining laws within the region and the recent high price of gold on the world market have prompted renewed interest in porphyry copper deposits in Southeast Asia and Melanesia. However, predicted undiscovered deposits may not be found, and if found, may not be developed. This assessment includes an overview of the assessment results with summary tables. Detailed descriptions of each tract are included in appendixes, with estimates of numbers of undiscovered deposits, and probabilistic estimates of amounts of copper, molybdenum, gold, and silver that could be contained in undiscovered deposits for each permissive tract. A geographic information system (GIS) that accompanies the report includes tract boundaries and a database of known porphyry copper deposits and significant prospects.

Scientific Investigations Report↗
USGS2013

Descriptive models, grade-tonnage relations, and databases for the assessment of sediment-hosted copper deposits: with emphasis on deposits in the Central Africa Copperbelt, Democratic Republic of the Congo and Zambia: Chapter J in Global mineral resource assessment

The Central African Copperbelt (CACB) is one of the most important copper-producing regions of the world. The majority of copper produced in Africa comes from this region defined by the Neoproterozoic Katanga sedimentary basin of the southern Democratic Republic of the Congo (DRC) and northern Zambia. Copper in the CACB is mined from sediment-hosted stratabound copper deposits associated with red beds and includes the giant deposits in the Kolwezi and Tenge-Fungurume districts in the DRC and the Konkola-Musoshi and Nchanga-Chingola districts in Zambia. In recent years, sediment-hosted structurally controlled replacement and vein (SCRV) copper deposits, such as the giant Kansanshi deposit in Zambia have become important exploration targets in the CACB region. In 2011, the CACB accounted for 7.2 percent of the estimated global mine production of copper. Global production of copper is principally derived from porphyry and sediment-hosted copper deposits (57 and 23 percent, respectively). Almost 50 percent of the copper known to exist in sediment-hosted deposits (past production plus identified resources) is contained in the CACB, 25 percent is contained in the Zechstein Basin of northern Europe, and the remainder is contained in an additional 29 sedimentary basins distributed around the globe. The U.S. Geological Survey (USGS) led an assessment of undiscovered copper resources in the CACB as part of a global mineral resource assessment for undiscovered resources of potash, copper, and platinum-group elements in selected mineral deposit types. As part of the assessment process, available data for the CACB were compiled and evaluated. This report describes the results of that work, including new descriptive mineral-deposit and grade and tonnage models and spatial databases for deposits and occurrences, ore bodies and open pits. Chapter 1 of this report summarizes a descriptive model of sediment-hosted stratabound copper deposits. General characteristics and subtypes of sediment-hosted stratabound copper deposits are described based upon worldwide examples. Chapter 2 provides a global database of 170 sediment-hosted copper deposits, along with a statistical evaluation of grade and tonnage data for stratabound deposits, a comparison of stratabound deposits in the CACB with those found elsewhere, a discussion of the distinctive characteristics of the subtypes of sediment-hosted copper deposits that occur within the CACB, and guidelines for using grade and tonnage distributions for assessment of undiscovered resources in sediment-hosted stratabound deposits in the CACB. Chapter 3 presents a new descriptive model of sediment-hosted structurally controlled replacement and vein (SCRV) copper deposits with descriptions of individual deposits of this type in the CACB and elsewhere. Appendix A describes a relational database of tonnage, grade, and other information for more than 100 sediment-hosted copper deposits in the CACB. These data are used to calculate the pre-mining mineral endowment for individual deposits in the CACB and serve as the basis for the grade and tonnage models presented in chapter 2. Appendix B describes three spatial databases (Esri shapefiles) for (1) point locations of more than 500 sediment-hosted copper deposits and prospects, (2) projected surface extent of 86 selected copper ore bodies, and (3) areal extent of 77 open pits, all within the CACB.

Scientific Investigations Report↗