Geology topics

James R. Degnan

Publications and source records attributed to James R. Degnan.

At least 19 recordsLinked to original sources

USGS2025

The National integrated water availability assessment, water years 2010–20

Water availability is fundamentally important to human well-being, economic vitality, and ecosystem health. Because of its central importance, the U.S. Congress tasked the U.S. Geological Survey (USGS) and other Federal agencies with conducting regular, comprehensive assessments of water availability in the United States through the requirements under the SECURE Water Act. In response to this mandate, the USGS has developed the U.S. Geological Survey Integrated Water Availability Assessment—2010–20, which addresses aspects of water supply, quality, and use related to water availability in the United States. This is the first chapter of that report. The major climatic factors affecting water availability are also described. Multiple aspects of water availability are integrated to produce a more comprehensive analysis of water availability in the United States. This chapter enumerates the development, organization, and tools used in the USGS Integrated Water Availability Assessment. SECURE Water Act reports, developed by the Department of Energy Hydropower Climate Change Assessment and the Bureau of Reclamation West-Wide Climate and Hydrology Assessment, are also described. A distilled list of key findings from the overall report is also provided, serving as an introduction to each topic along with the most important high-level information.

conterminous United States↗

USGS2025

Water supply in the conterminous United States, Alaska, Hawaii, and Puerto Rico, water years 2010–20

We present an assessment of water supply across the conterminous United States (CONUS), Alaska, Hawaii, and Puerto Rico covering water years 2010–20. Our analysis drew on two national hydrologic models, the National Hydrologic Model Precipitation-Runoff Modeling System and the Weather Research and Forecasting model hydrologic modeling system. Both models produced estimates of streamflow, evapotranspiration, soil moisture, snow water equivalent, and other hydrologic states and fluxes. The models were driven by the bias-adjusted 4-kilometer-resolution, long-term regional hydroclimate simulation over the conterminous United States dataset (CONUS404). We assessed spatial and temporal error distributions by comparing monthly simulations at the 12-digit hydrologic unit code and regional scale from both models against external benchmarking datasets. Results showed that average annual rainfall across the CONUS was 857 millimeters per year for the period of analysis, with water year 2012 the driest year (729 millimeters) and water year 2019 the wettest year (995 millimeters). Key interannual variability results included the following: (1) the California–Nevada hydrologic region had the highest variability in precipitation and snow accumulation, and (2) the Texas hydrologic region was among hydrologic regions with the highest variability in precipitation. We related interannual variability in precipitation to storage volumes in soil moisture, snow water equivalent, and lakes and reservoirs to highlight areas with little storage and large year-to-year variability in precipitation. These areas included the Southern High Plains, Central High Plains, Texas, Souris–Red–Rainy, Mississippi Embayment, and Midwest regions. Our analysis of groundwater-level data showed that several of these areas overlap aquifers where groundwater levels were considerably lower than historical averages, including the Colorado Plateaus aquifers, the Rio Grande aquifer system, and the Central and Southern regions of the High Plains aquifer. Many of these lowered groundwater levels are continuations of decades-long declines from overpumping that started well before the assessment period. The resulting water budgets and their analyses provide a high-resolution foundational assessment of the mean state and variability of the terrestrial hydrologic cycle across the CONUS and Alaska, Hawaii, and Puerto Rico to support a wide range of water resource management applications.

Professional Paper↗

USGS2025

Status of water-quality conditions in the United States, 2010–20

Degradation of water quality can make water harmful or unusable for humans and ecosystems. Although many studies have assessed the effect of individual constituents or narrow suites of constituents on freshwater systems, no consistent, comprehensive assessment exists over the wide range of water-quality effects on water availability. Using published studies, data, and models completed at regional or national scales in the United States during 2010–20, this chapter moves towards a comprehensive assessment by summarizing how selected anthropogenic and geogenic water-quality constituents affect national-scale water availability for human and ecosystem needs. Several types of human health, agricultural, ecological, and beneficial-use standards or thresholds were used to provide context for categorizing surface-water and groundwater quality. Water availability for human and ecological use is limited by elevated concentrations of geogenic and anthropogenic constituents in surface and groundwater. Elevated concentrations of five geogenic constituents (arsenic, manganese, strontium, radium, and adjusted gross alpha) are common in groundwater and collectively affect the drinking water supply to over 30 million people. Surface water sourced drinking water supplies are impaired in about a third of assessed stream miles, most commonly because of non-mercury metals and salinity. Health-based violations at community water systems may disproportionately affect socially vulnerable communities. Ecological water uses are predominantly limited by nutrients, sediment, temperature, pathogens, salinity, and pesticides. Water availability for human and ecological use is adversely affected by human activities including human contaminant sources (for example, wastewater, agriculture), processes (for example, dredging, groundwater pumping), or permanent landscape modifications (for example, dams, urbanization). Primary contaminant sources vary spatially and include fertilizer and manure, atmospheric deposition, wastewater treatment plants, urban land, and a range of natural sources. Contaminants of emerging concern, contaminants without regulatory thresholds, and mixtures of geogenic and anthropogenic water contaminants also contribute to ecological degradation and human exposure.

conterminous United States↗

USGS2023

Advancing subsurface investigations beyond the borehole with passive seismic horizontal-to-vertical spectral ratio and electromagnetic geophysical methods at transportation infrastructure sites in New Hampshire

The U.S. Geological Survey (USGS), in cooperation with the New Hampshire Department of Transportation (NHDOT), surveyed transportation infrastructure sites using rapidly deployable geophysical methods to assess benefits added to a comprehensive site characterization with traditional geotechnical techniques. Horizontal-to-vertical spectral-ratio (HVSR) passive-seismic and electromagnetic-induction (EMI) methods were applied at 4 sites including a roadway-stream crossing, roadway-bridge rail-trail crossing, commuter-parking expansion, and a railroad-adjacent river-cutbank slope-failure site. Additionally, ground-penetrating-radar (GPR) was used at the slope-failure site. Typically, subsurface geotechnical properties are determined from boring data; however, borings are often spaced hundreds of feet apart, potentially missing important spatial variability between boreholes. Geotechnical site characterization including geophysical surveys helped provide a more accurate characterization by using continuous or near continuous profiling. Three-component ambient noise measured with HVSR methods were used to determine resonance frequency and estimate sediment thickness. The method works when there is a strong shear-wave acoustic impedance contrast (> 2:1) between sediment and bedrock. Sediment thickness estimates from HVSR measurements were combined with boring data to make detailed maps of the bedrock surface altitude. The bulk electrical conductivity of the subsurface was indirectly measured with EMI methods and was used to identify lithologic variations, shallow bedrock, and conductive groundwater. Ground penetrating radar, which transmits pulses of electromagnetic energy into the subsurface and records the amplitude and timing of reflected signals, was used to identify bedding and changes in lithology or water content. By combining geophysical and boring data analyses, transportation projects produced more spatially comprehensive representations of geotechnical subsurface conditions than would be determined using conventional borings alone.

New Hampshire↗

USGS2021

Depth of groundwater used for drinking-water supplies in the United States

Groundwater supplies 35 percent of drinking water in the United States. Mapping the quantity and quality of groundwater at the depths used for potable supplies requires an understanding of locational variation in the characteristics of drinking-water wells (depth and open interval). Typical depths of domestic- and public-drinking-water supply wells vary by and within aquifer across the United States. The depths to the top and bottom of the zones from which drinking water is withdrawn are important predictor variables in regional- and national-scale statistical water models, but spatially extensive maps of the depths to drinking-water-supply sources are not consistently available in modeled regions. Therefore, it was necessary to generate a set of grids representing surfaces of the approximate common depth and length of open intervals in the wells from which water is withdrawn for domestic- and public-drinking-water supply (withdrawal zones) within the conterminous United States. Well data (about 7.6 million records) were compiled from several sources, including the U.S. Geological Survey’s National Water Information System (600,922 records), the U.S. Environmental Protection Agency’s Safe Drinking Water Information System dataset (66,540 records, primarily public-supply wells), a groundwater ambient monitoring dataset (31,448 records, primarily domestic-supply wells), individual State data (6,096,503 records), a national brackish aquifer study (96,885 records), and a glacial aquifer study (729,564 records). Fifty-seven principal aquifers and 65 secondary hydrogeologic regions have been designated in the conterminous United States. The principal aquifers and secondary hydrogeologic regions vary in depth, thickness, lithology, and transmissivity characteristics. Some principal aquifers underlie secondary hydrogeologic regions, and may in turn be overlain by glacial sediment or basin and valley fill aquifers, which may also be used as drinking-water sources. The principal aquifer and secondary hydrogeologic region polygons were merged with overlying sediment polygons, where present, including glacial sediment, coarse glacial sediment, and stream valley alluvium (alluvium) polygons, to generate unique hydrogeologic settings across the conterminous United States. A total of 288 distinct hydrogeologic settings resulted from the merging of principal aquifer, secondary hydrogeologic region, glacial sediment, coarse glacial sediment, and alluvium polygons. Each well was assigned to a hydrogeologic setting on the basis of location. Hydrogeologic setting well groupings were used to guide calculations of the median value for well depth and depth to and length of open intervals across the hydrogeologic setting. Where well data were sparse or missing, wells from hydrogeologic settings with similar well construction properties, geology, physiography, and topography were grouped and used to calculate the moving median depth (if less than five wells in a 100-kilometer [62.1-mile] radius) and to estimate open interval length (if not available within hydrogeologic setting). Grids were generated to represent what might be considered as the “typical” or “median” domestic- and public-supply well in an area. The well properties are defined with moving median grids of top depth, bottom depth, and length of open interval at a 1-square-kilometer (0.38-square-mile) grid cell scale. Median depths and open intervals of domestic- and public-supply wells varied by lithology of the hydrogeologic setting and overlying sediment. Overall, the median depths were 142 feet (43.3 meters) for all domestic-supply wells and 202 feet (61.6 meters) for all public-supply wells. The median open intervals were 21 feet (6.4 meters) for domestic-supply wells and 49 feet (14.9 meters) for public-supply wells. The shallowest median bottom open interval depths for domestic-supply wells were in the secondary hydrogeologic regions with coarse glacial sediment, which suggests that the wells are most commonly completed in the permeable coarse glacial sediment and not in the underlying secondary hydrogeologic region. Public-supply wells were completed at relatively shallow median depths when drilled in permeable sediment that overlie secondary hydrogeologic regions. When public-supply wells were completed in principal aquifers, the median depths were typically greater than wells completed in secondary hydrogeologic regions. Well data used in this study were limited to those available from national or State digital databases. Several quality-assurance checks were performed during data compilation, but a comprehensive quality assurance inspection for each of the data sources was outside the scope of this study. Grids defining typical open intervals in domestic- and public-supply wells are presented. Although there are many places where multiple aquifers are stacked, these results correspond primarily to the aquifer with the highest documented number of wells for each use.

Scientific Investigations Report↗

USGS2021

Groundwater quality in the Colorado Plateaus aquifers, western United States

Groundwater provides nearly 50 percent of the Nation’s drinking water. To help protect this vital resource, the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Project assesses groundwater quality in aquifers that are important sources of drinking water. The Colorado Plateaus aquifers constitute one of the important areas being evaluated.

Arizona, Colorado, New Mexico, Utah, Wyoming↗

USGS2021

Groundwater-quality and select quality-control data from the National Water-Quality Assessment Project, January 2017 through December 2019

Groundwater-quality environmental data were collected from 983 wells as part of the National Water-Quality Assessment Project of the U.S. Geological Survey National Water Quality Program and are included in this report. The data were collected from six types of well networks: principal aquifer study networks, which are used to assess the quality of groundwater used for public water supply; land-use study networks, which are used to assess land-use effects on shallow groundwater quality; major aquifer study networks, which are used to assess the quality of groundwater used for domestic supply; enhanced trends networks, which are used to evaluate the time scales during which groundwater quality changes; vertical flow-path study networks, which are used to evaluate changes in groundwater quality from shallow to deeper depths; and modeling support studies, which are used to provide data to support groundwater modeling. Groundwater samples were analyzed for many water-quality indicators and constituents, including major ions, nutrients, trace elements, volatile organic compounds, pesticides, radionuclides, microbiological indicators, and some constituents of special interest (arsenic speciation, hexavalent chromium [chromium (VI)], and perchlorate). These groundwater-quality data, along with data from quality-control samples, are tabulated in this report and in an associated data release. Data for microbiological indicators for samples collected in 2016 are included in the companion data release.

Data Series↗

USGS2020

A multi-model approach toward understanding iron fouling at rock-fill drainage sites along roadways in New Hampshire, USA

Factors affecting iron fouling in wet areas adjacent to roadways were investigated by collecting field rock cut and aqueous physicochemical data; developing exploratory predictive models; and developing geochemical models. Basic data included the identification of iron fouling from aerial imagery and field visits at 374 New Hampshire rock cut locations, and their associated rock-fill sites. Based on field water quality measurements from wet areas at 36 of the rock-fill sites, the occurrence of iron fouling was associated with higher values of specific conductance, lower concentrations of dissolved oxygen and lower pH compared to areas without iron fouling. A statistical model, using boosted regression trees, was developed to predict the occurrence of iron fouling in wet areas adjacent to roadways where rock-fill from nearby rock cuts was used in roadway construction. The model was used to develop a continuous iron fouling probability map for the state of New Hampshire that can be used to better understand the occurrence of iron fouling. Geochemical models illustrate how iron fouling of waters increases along roadways built with fill from sulfidic rock cuts as a result of acid generation from pyrite dissolution and ferrous iron (Fe 2+ ) oxidation and increases in areas with greater specific conductance from deicing runoff caused by cation exchange. More iron is precipitated as goethite in simulations that include pyrite, and in simulations with deicing salts added, indicating that rock-fill sites with rocks that contain pyrite and water with greater salt content could have enhanced iron fouling.

New Hampshire↗

USGS2020

Groundwater-quality and select quality-control data from the National Water-Quality Assessment Project, January through December 2016, and previously unpublished data from 2013 to 2015

Environmental groundwater-quality data were collected from 648 wells as part of the National Water-Quality Assessment Project of the U.S. Geological Survey National Water-Quality Program and are included in this report. Most of the wells (514) were sampled from January through December 2016, and 60 of them were sampled in 2013 and 74 in 2014. The data were collected from seven types of well networks: principal aquifer study networks, which are used to assess the quality of groundwater used for public-water supply; land-use study networks, which are used to assess land-use effects on shallow groundwater quality; major aquifer study networks, which are used to assess the quality of groundwater used for domestic supply; enhanced trends networks, which are used to evaluate the time scales during which groundwater quality changes; vertical flow-path study networks, which are used to evaluate changes in groundwater quality from shallow to deeper depths; flow-path study networks, which are used to evaluate changes in groundwater quality from shallow to deeper depths over a horizontal distance; and modeling support studies, which are used to provide data to support groundwater modeling. Groundwater samples were analyzed for many water-quality indicators and constituents, including major ions, nutrients, trace elements, volatile organic compounds, pesticides, radionuclides, and some constituents of special interest (arsenic speciation, chromium [VI], and perchlorate). These groundwater-quality data, along with data from quality-control samples, are tabulated in this report and in an associated data release. Some data from environmental samples collected in 2013–14 and quality-control samples collected in 2012–15 also are included in the associated data release. Data from samples collected in 2016 are associated with networks described in this report and have not been published previously; data from samples collected between 2012 and 2015 are associated with networks described in previous reports in this data series.

Data Series↗

USGS2020

Time scales of arsenic variability and the role of high-frequency monitoring at three water-supply wells in New Hampshire, USA

Groundwater geochemistry, redox process classification, high-frequency physicochemical and hydrologic measurements, and climate data were analyzed to identify controls on arsenic (As) concentration changes. Groundwater was monitored in two public-supply wells (one glacial aquifer and one bedrock aquifer), and one bedrock-aquifer domestic well in New Hampshire, USA, from 2014 to 2018 to identify time scales of and controls on As concentration changes. Concentrations of As and other geochemical constituents were measured bimonthly. Specific conductance (SC), pH, dissolved oxygen, and pumping rate/water level were measured at high frequency (every 5 to 15 min). Median (and 95% confidence interval) As concentrations at the three wells were 4.1 (3.7–4.6), 18.9 (17.2–23.6), and 37.5 (30.4–42.9) μg/L. Arsenic variability in each of the three wells, in relative standard deviation, ranged from 9 to 12%. Median quarterly As concentrations were highest in all wells in the spring. The bedrock-aquifer public-supply well As concentration increased over the period of study while pumping rate decreased. In the public-supply wells, As variability was correlated with SC and pH, and As species were related to SC, pH, pumping, precipitation, and changes in redox process. Specific conductance also had a seasonal pattern in the two public-supply wells and was correlated with Na and Cl. Excess Na in water samples suggests possible ion exchange with dissolved Ca, creating more capacity to dissolve CaCO 3 from calcareous rocks, which can increase pH and in turn, As concentrations in wells. High-frequency monitoring data are cost effective to collect, which could be advantageous in other parts of the United States and in the many parts of the world where glacial aquifers are in direct contact with other water supply aquifers or where water from different aquifers have potential to mix.

New Hampshire↗

USGS2020

The relation of geogenic contaminants to groundwater age, aquifer hydrologic position, water type, and redox conditions in Atlantic and Gulf Coastal Plain aquifers, eastern and south-central USA

Groundwater age distributions developed from carbon-14 (14C), tritium (3H), and helium-4 (4He) concentrations, along with aquifer hydrologic position, water type, and redox conditions, were compared to geogenic contaminants of concern (GCOC) from 252 public-supply wells in six Atlantic and Gulf Coastal Plain unconsolidated-sediment aquifers. Concentrations of one or more GCOCs in 168 (67%) wells exceeded MCLs (maximum contaminant levels), SMCLs (secondary MCLs), or HBSLs (health-based screening levels). Human-health benchmark thresholds (MCLs or HBSLs) were exceeded in 31 (12%) wells, and included 0.8% for fluoride (F), 2.4% for arsenic (As), 4% for lead-210 (210Pb), and 4.8% for polonium-210 (210Po). Values of pH increase with age and were outside the SMCL in 31% of wells (23% < 6.5 and 7.5% > 8.5, SMCL). Among GCOCs with concentrations that increased significantly with groundwater age, the frequency of sentry threshold exceedances (i.e., one-half of MCL, SMCL, or HBSL) included 40% for dissolved solids (DS), 12% for chloride (Cl), 3.6% for F, 4.4% for As, and 9.1% for 210Po. Iron (Fe) concentrations did not correlate with groundwater age but exceeded sentry thresholds in 29% of wells. Groundwater age, water types, redox, pH, and GCOCs varied because of unique hydrogeologic features of the aquifers (recharge locations and geometry). As expected, primarily confined aquifers had young, oxic, low to near-neutral pH water near the outcrop (recharge area), and older, reduced, high pH water deeper and farther along flow paths. However, unique aquifer hydrogeologic conditions, such as multiple-recharge zones produced anomalous patterns of young and old groundwater at varying depths and locations along flow paths. Evidence for this variability is seen in disequilibrium patterns in the progression of the chemical evolution of groundwater with hydrologic position. When hydrogeologic differences are considered, groundwater age combined with hydrologic-position data, can provide a strong basis for inferring potential occurrence of GCOCs.

Gulf Coastal Plain aquifers↗

USGS2019

Arsenic variability and groundwater age in three water supply wells in southeast New Hampshire

Three wells in New Hampshire were sampled bimonthly over three years to evaluate the temporal variability of arsenic concentrations and groundwater age. All samples had measurable concentrations of arsenic throughout the entire sampling period and concentrations in individual wells varied, on average, by more than 7 µg/L. High arsenic concentrations (>10 µg/L) were measured in bedrock wells KFW-87 and SGW-93, consistent with the high pH and low dissolved oxygen typically found in fractured crystalline bedrock aquifers in New Hampshire. Lower arsenic concentrations (<10 µg/L) at well SGW-65 were consistent with lower pH typical of glacial aquifers in New Hampshire.

New Hampshire↗

USGS2017

Brackish groundwater in the United States

For some parts of the Nation, large-scale development of groundwater has caused decreases in the amount of groundwater that is present in aquifer storage and that discharges to surface-water bodies. Water supply in some areas, particularly in arid and semiarid regions, is not adequate to meet demand, and severe drought is affecting large parts of the United States. Future water demand is projected to heighten the current stress on groundwater resources. This combination of factors has led to concerns about the availability of freshwater to meet domestic, agricultural, industrial, mining, and environmental needs. To ensure the water security of the Nation, currently [2016] untapped water sources may need to be developed. Brackish groundwater is an unconventional water source that may offer a partial solution to current and future water demands. In support of the national census of water resources, the U.S. Geological Survey completed the national brackish groundwater assessment to better understand the occurrence and characteristics of brackish groundwater in the United States as a potential water resource. Analyses completed as part of this assessment relied on previously collected data from multiple sources; no new data were collected. Compiled data included readily available information about groundwater chemistry, horizontal and vertical extents and hydrogeologic characteristics of principal aquifers (regionally extensive aquifers or aquifer systems that have the potential to be used as a source of potable water), and groundwater use. Although these data were obtained from a wide variety of sources, the compiled data are biased toward shallow and fresh groundwater resources; data representing groundwater that is at great depths and is saline were not as readily available. One of the most important contributions of this assessment is the creation of a database containing chemical characteristics and aquifer information for the known areas with brackish groundwater in the United States. Previously published digital data relating to brackish groundwater resources were limited to a small number of State- and regional-level studies. Data sources for this assessment ranged from single publications to large datasets and from local studies to national assessments. Geochemical data included concentrations of dissolved solids, major ions, trace elements, nutrients, and radionuclides as well as physical properties of the water (pH, temperature, and specific conductance). Additionally, the database provides selected well information (location, yield, depth, and contributing aquifer) necessary for evaluating the water resource. The assessment was divided into national-, regional-, and aquifer-scale analyses. National-scale analyses included evaluation of the three-dimensional distribution of observed dissolved-solids concentrations in groundwater, the three-dimensional probability of brackish groundwater occurrence, and the geochemical characteristics of saline (greater than or equal to 1,000 mg/L of dissolved solids) groundwater resources. Regional-scale analyses included a summary of the percentage of observed grid cell volume in the region that was occupied by brackish groundwater within the mixture of air, water, and rock for multiple depth intervals. Aquifer-scale analyses focused primarily on four regions that contained the largest amounts of observed brackish groundwater and included a generalized description of hydrogeologic characteristics from previously published work; the distribution of dissolved-solids concentrations; considerations for developing brackish groundwater resources, including a summary of other chemical characteristics that may limit the use of brackish groundwater and the ability of sampled wells producing brackish groundwater to yield useful amounts of water; and the amount of saline groundwater being used in 2010.

Professional Paper↗

USGS2015

Identification of groundwater nitrate contamination from explosives used in road construction: Isotopic, chemical, and hydrologic evidence

Explosives used in construction have been implicated as sources of NO 3 – contamination in groundwater, but direct forensic evidence is limited. Identification of blasting-related NO 3 – can be complicated by other NO 3 – sources, including agriculture and wastewater disposal, and by hydrogeologic factors affecting NO 3 – transport and stability. Here we describe a study that used hydrogeology, chemistry, stable isotopes, and mass balance calculations to evaluate groundwater NO 3 – sources and transport in areas surrounding a highway construction site with documented blasting in New Hampshire. Results indicate various groundwater responses to contamination: (1) rapid breakthrough and flushing of synthetic NO 3 – (low δ 15 N, high δ 18 O) from dissolution of unexploded NH 4 NO 3 blasting agents in oxic groundwater; (2) delayed and reduced breakthrough of synthetic NO 3 – subjected to partial denitrification (high δ 15 N, high δ 18 O); (3) relatively persistent concentrations of blasting-related biogenic NO 3 – derived from nitrification of NH 4 + (low δ 15 N, low δ 18 O); and (4) stable but spatially variable biogenic NO 3 – concentrations, consistent with recharge from septic systems (high δ 15 N, low δ 18 O), variably affected by denitrification. Source characteristics of denitrified samples were reconstructed from dissolved-gas data (Ar, N 2 ) and isotopic fractionation trends associated with denitrification (Δδ 15 N/Δδ 18 O ≈ 1.31). Methods and data from this study are expected to be applicable in studies of other aquifers affected by explosives used in construction.

Environmental Science & Technology↗

USGS2015

Surface geophysics and porewater evaluation at the Lower Darby Creek Area Superfund Site, Philadelphia, Pennsylvania, 2013

In cooperation with the U.S. Environmental Protection Agency (EPA), Region 3, the U.S. Geological Survey (USGS) is participating in an ongoing study to aid in the identification of subsurface heterogeneities that may act as preferential pathways for contaminant transport in and around the Lower Darby Creek Area (LDCA) Superfund Site, Philadelphia Pa. Lower Darby Creek, which flows into the Delaware River, borders the western part of the former landfill site. In 2013, the USGS conducted surface geophysics measurements and stream porewater sampling to provide additional data for EPA’s site characterization. This report contains data collected from field measurements of direct current (DC) resistivity, frequency-domain electromagnetic (FDEM) surveys, and stream porewater specific conductance (SC).

Pennsylvania↗

USGS2015

Hydrogeologic framework, hydrology, and refined conceptual model of groundwater flow for Coastal Plain aquifers at the Standard Chlorine of Delaware, Inc. Superfund Site, New Castle County, Delaware, 2005-12

From 1966 to 2002, activities at the Standard Chlorine of Delaware chemical facility in New Castle County, Delaware resulted in the contamination of groundwater, soils, and wetland sediment. In 2005, the U.S. Geological Survey (USGS), in partnership with the U.S. Environmental Protection Agency, Region 3, and the Delaware Department of Natural Resources and Environmental Control began a multi-year investigation of the hydrogeologic framework and hydrology of the confined aquifer system. The goals of the ongoing study at the site (the Potomac Aquifer Study) are to determine the hydraulic connection between the Columbia and Potomac aquifers, determine the direction of groundwater flow in the Potomac aquifer, and identify factors affecting the fate of contaminated groundwater. This report describes progress made towards these goals based on available data collected through September 2012. The regional hydrogeologic framework indicates that the site is underlain by Coastal Plain sediments of the Columbia, Merchantville, and Potomac Formations. Two primary aquifers underlying the site, the Columbia and the upper Potomac, are separated by the Merchantville Formation confining unit. Local groundwater flow in the surficial (Columbia) aquifer is controlled by topography and generally flows northward and discharges to nearby surface water. Regional flow within the Potomac aquifer is towards the southeast, and is strongly influenced by major water withdrawals locally. Previous investigations at the site indicated that contaminants, primarily benzene and chlorinated benzene compounds, were present in the Columbia aquifer in most locations; however, there were only limited detections in the upper Potomac aquifer as of 2004. From 2005 through 2012, the USGS designed a monitoring network, assisted with exploratory drilling, collected data at monitoring wells, conducted geophysical surveys, evaluated water-level responses in wells during pumping of a production well, and evaluated major aquifer withdrawals. Data collected through these efforts were used to refine the local conceptual flow system. The refined conceptual flow system for the site includes: (a) identification of gaps in confining units in the study area, (b) identification and correlation of multiple water-bearing sand intervals within the upper Potomac Formation, (c) connections between groundwater and surface water, (d) connections between shallow and deeper groundwater, (e) new water-level (or potentiometric surface) maps and inferred flow directions, and (f) identification of major local pumping well influences. The implications of the revised conceptual flow system on the occurrence and movement of site contaminants are that the resulting detection of contaminants in the upper Potomac aquifer at specific well locations can be attributed primarily to either advective lateral transport, direct vertical contaminant transport, or a combination of vertical and lateral movement resulting from changes in water withdrawal rates over time.

Delaware↗

USGS2014

Geophysical logging of bedrock wells for geothermal gradient characterization in New Hampshire, 2013

The U.S. Geological Survey, in cooperation with the New Hampshire Geological Survey, measured the fluid temperature of groundwater and other geophysical properties in 10 bedrock wells in the State of New Hampshire in order to characterize geothermal gradients in bedrock. The wells selected for the study were deep (five ranging from 375 to 900 feet and five deeper than 900 feet) and 6 had low water yields, which correspond to low groundwater flow from fractures. This combination of depth and low water yield reduced the potential for flow-induced temperature changes that would mask the natural geothermal gradient in the bedrock. All the wells included in this study are privately owned, and permission to use the wells was obtained from landowners before geophysical logs were acquired for this study. National Institute of Standards and Technology thermistor readings were used to adjust the factory calibrated geophysical log data. A geometric correction to the gradient measurements was also necessary due to borehole deviation from vertical. Maximum groundwater temperatures at the bottom of the logs ranged from 11.2 to 15.4 degrees Celsius. Geothermal gradients were generally higher than those typically reported for other water wells in the United States. Some of the high gradients were associated with high natural gamma emissions. Groundwater flow was discernible in 4 of the 10 wells studied but only obscured the part of the geothermal gradient signal where groundwater actually flowed into, out of, or through the well. Temperature gradients varied by mapped bedrock type but can also vary by localized differences in mineralogy or rock type within the wells.

New Hampshire↗

USGS2013

Characterization of mercury contamination in the Androscoggin River, Coos County, New Hampshire

The former chloralkali facility in Berlin, New Hampshire, was designated a Superfund site in 2005. Historic paper mill activities resulted in the contamination of groundwater, surface water, and sediments with many organic compounds and mercury (Hg). Hg continues to seep into the Androscoggin River in elemental form through bedrock fractures. The objective of this study was to spatially characterize (1) the extent of Hg contamination in water, sediment, and biota; (2) Hg speciation and methylmercury (MeHg) production potential rates in sediment; (3) the availability of inorganic divalent Hg (Hg(II)) for Hg(II)-methylation (MeHg production); and (4) ancillary sediment geochemistry necessary to better understand Hg speciation and MeHg production potential rates in this system. Concentrations of total mercury (THg) and MeHg in sediment, pore water, and biota in the Androscoggin River were elevated downstream from the former chloralkali facility compared with those upstream from reference sites. Sequential extraction of surface sediment showed a distinct difference in Hg speciation upstream compared with downstream from the contamination site. An upstream site was dominated by potassium hydroxide-extractable forms (for example, organic-Hg or particle-bound Hg(II)), whereas sites downstream from the point source were dominated by more chemically recalcitrant forms (largely concentrated nitric acid-extractable), indicative of elemental mercury or mercurous chloride. At all sites, only a minor fraction (less than 0.1 percent) of THg existed in chemically labile forms (for example, water extractable or weak acid extractable). All metrics indicated that a greater percentage of mercury at an upstream site was available for Hg(II)-methylation compared with sites downstream from the point source, but the absolute concentration of bioavailable Hg(II) was greater downstream from the point source. In addition, the concentration of tin-reducible inorganic reactive mercury, a surrogate measure of bioavailable Hg(II) generally increased with distance downstream from the point source. Whereas concentrations of mercury species on a sediment-dry-weight basis generally reflected the relative location of the sample to the point source, river-reach integrated mercury-species inventories and MeHg production potential (MPP) rates reflected the amount of fine-grained sediment in a given reach. THg concentrations in biota were significantly higher downstream from the point source compared with upstream reference sites for smallmouth bass, white sucker, crayfish, oligochaetes, bat fur, nestling tree swallow blood and feathers, adult tree swallow blood, and tree swallow eggs. As with tin-reducible inorganic reactive mercury, THg in smallmouth bass also increased with distance downstream from the point source. Toxicity tests and invertebrate community assessments suggested that invertebrates were not impaired at the current (2009 and 2010) levels of mercury contamination downstream from the point source. Concentrations of THg and MeHg in most water and sediment samples from the Androscoggin River were below U.S. Environmental Protection Agency (USEPA), the Canadian Council of Ministers of the Environment, and probable effects level guidelines. Surface-water and sediment samples from the Androscoggin River had similar THg concentrations but lower MeHg concentrations compared with other rivers in the region. Concentrations of THg in fish tissue were all above regional and U.S. Environmental Protection Agency guidelines. Moreover, median THg concentrations in smallmouth bass from the Androscoggin River were significantly higher than those reported in regional surveys of river and streams nationwide and in the Northeastern United States and Canada. The higher concentrations of mercury in smallmouth bass suggest conditions may be more favorable for Hg(II)-methylation and bioaccumulation in the Androscoggin River compared with many other rivers in the United States and Canada.

New Hampshire↗