Geology topics

James J. Lienkaemper

Publications and source records attributed to James J. Lienkaemper.

At least 19 recordsLinked to original sources

USGS2018

Serpentinite‐rich gouge in a creeping segment of the Bartlett Springs Fault, northern California: Comparison with SAFOD and implications for seismic hazard

An exposure of a creeping segment of the Bartlett Springs Fault (BSF), part of the San Andreas Fault system in northern California, is a ~1.5‐m‐wide zone of serpentinite‐bearing fault gouge cutting through Late Pleistocene fluvial deposits. The fault gouge consists of porphyroclasts of antigorite serpentinite, talc, chlorite, and tremolite‐actinolite, along with some Franciscan metamorphic rocks, in a matrix of the same materials. The Mg‐mineral assemblage is stable at temperatures above 250–300 °C. The BSF gouge is interpreted to have been tectonically incorporated into the fault from depths near the base of the seismogenic zone and to have risen buoyantly to the surface where it is now undergoing right‐lateral displacement. The ultramafic‐rich composition, frictional properties, and inferred mode of emplacement of the BSF serpentinitic gouge correspond to those of the creeping traces of the San Andreas Fault identified in the SAFOD (San Andreas Fault Observatory at Depth) drill hole. This suggests a common origin for creep at both locations. A tectonic model for the source of the ultramafic‐rich materials in the BSF is proposed that potentially could explain the distribution of creep throughout the northernmost San Andreas Fault system.

California↗

USGS2018

The Hayward Fault—Is it due for a repeat of the powerful 1868 earthquake?

On October 21, 1868, a magnitude 6.8 earthquake struck the San Francisco Bay area. Although the region was sparsely populated, the quake on the Hayward Fault was one of the most destructive in California’s history. U.S. Geological Survey (USGS) studies show that similar Hayward Fault quakes have repeatedly jolted the region in the past and that the fault may be ready to produce another magnitude 6.8 to 7.0 earthquake. Such an earthquake could unexpectedly change people’s lives and impact the Bay Area’s infrastructure and economy, but updated building codes and retrofits, as well as planning, community training, and preparedness, will help reduce the effects of a future Hayward Fault earthquake.

California↗

USGS2017

Long-term afterslip of the M6.0, 2004 Parkfield, California, earthquake—Implications for forecasting amount and duration of afterslip on other major creeping faults

We present the longest record of surface afterslip on a continental strike‐slip fault for the 2004 M 6.0 Parkfield, California, earthquake, from which we can derive critical information about the duration and predictability of afterslip relevant to urban displacement hazard applications. Surface slip associated with this event occurred entirely postseismically along the interseismically creeping (0.6–1.5 cm/yr) main trace of the San Andreas fault. Using the first year of afterslip data, the program AFTER correctly predicted the cumulative surface afterslip (maximum ∼35 cm) eventually attained. By 1 yr postearthquake, observed afterslip had accumulated to only ∼74% of its modeled final value u f in units of length. The 6‐yr data suggested final slip would be reached everywhere by ∼6–12 yrs. Parkfield’s afterslip lasted much longer (∼6–12 yrs) than afterslip following a 2014 M 6.0 event in Napa, California, where no interseismic creep was known, and its afterslip neared completion (∼97% of u f ) by 1 yr. The uncertainty in u f for the Napa event fell to ≤2 cm in only three months, versus in 2 yrs for the Parkfield event, mostly because duration of the power‐law stage of afterslip at Parkfield is much longer, ∼1000 (493–1666) days versus ∼100 (35–421) days for Napa. Because the urban Hayward fault near San Francisco, California, like the Parkfield section, exhibits interseismic creep in a similar geological regime, significant afterslip might last for up to a decade following an anticipated M ≥6.7 earthquake, potentially delaying postearthquake recovery.

California↗

USGS2016

Tearing the terroir: Details and implications of surface rupture and deformation from the 24 August 2014 M6.0 South Napa earthquake, California

The M w 6.0 South Napa earthquake of 24 August 2014 caused slip on several active fault strands within the West Napa Fault Zone (WNFZ). Field mapping identified 12.5 km of surface rupture. These field observations, near-field geodesy and space geodesy, together provide evidence for more than ~30 km of surface deformation with a relatively complex distribution across a number of subparallel lineaments. Along a ~7 km section north of the epicenter, the surface rupture is confined to a single trace that cuts alluvial deposits, reoccupying a low-slope scarp. The rupture continued northward onto at least four other traces through subparallel ridges and valleys. Postseismic slip exceeded coseismic slip along much of the southern part of the main rupture trace with total slip 1 year postevent approaching 0.5 m at locations where only a few centimeters were measured the day of the earthquake. Analysis of airborne interferometric synthetic aperture radar data provides slip distributions along fault traces, indicates connectivity and extent of secondary traces, and confirms that postseismic slip only occurred on the main trace of the fault, perhaps indicating secondary structures ruptured as coseismic triggered slip. Previous mapping identified the WNFZ as a zone of distributed faulting, and this was generally borne out by the complex 2014 rupture pattern. Implications for hazard analysis in similar settings include the need to consider the possibility of complex surface rupture in areas of complex topography, especially where multiple potentially Quaternary-active fault strands can be mapped.

California↗

USGS2016

Afterslip behavior following the M6.0, 2014 South Napa earthquake with implications for afterslip forecasting on other seismogenic faults

The M6.0, 24 Aug. 2014 South Napa, California, earthquake exhibited unusually large slip for a California strike-slip event of its size with a maximum coseismic surface slip of 40-50 cm in the north section of the 15 km-long rupture. Although only minor (<10 cm) surface slip occurred coseismically in the southern 9-km section of the rupture, there was considerable postseismic slip, so that the maximum total slip one year after the event approached 40-50 cm, about equal to the coseismic maximum in the north. We measured the accumulation of postseismic surface slip on four, ~100-m-long alignment arrays for one year following the event. Because prolonged afterslip can delay reconstruction of fault-damaged buildings and infrastructure, we analyzed its gradual decay to estimate when significant afterslip would likely end. This forecasting of Napa afterslip suggests how we might approach the scientific and engineering challenges of afterslip from a much larger M~7 earthquake anticipated on the nearby, urban Hayward Fault. However, we expect its afterslip to last much longer than one year.The M6.0, 24 Aug. 2014 South Napa, California, earthquake exhibited unusually large slip for a California strike-slip event of its size with a maximum coseismic surface slip of 40-50 cm in the north section of the 15 km-long rupture. Although only minor (<10 cm) surface slip occurred coseismically in the southern 9-km section of the rupture, there was considerable postseismic slip, so that the maximum total slip one year after the event approached 40-50 cm, about equal to the coseismic maximum in the north. We measured the accumulation of postseismic surface slip on four, ~100-m-long alignment arrays for one year following the event. Because prolonged afterslip can delay reconstruction of fault-damaged buildings and infrastructure, we analyzed its gradual decay to estimate when significant afterslip would likely end. This forecasting of Napa afterslip suggests how we might approach the scientific and engineering challenges of afterslip from a much larger M~7 earthquake anticipated on the nearby, urban Hayward Fault. However, we expect its afterslip to last much longer than one year.

California↗

USGS2015

Rates and patterns of surface deformation from laser scanning following the South Napa earthquake, California

The A.D. 2014 M6.0 South Napa earthquake, despite its moderate magnitude, caused significant damage to the Napa Valley in northern California (USA). Surface rupture occurred along several mapped and unmapped faults. Field observations following the earthquake indicated that the magnitude of postseismic surface slip was likely to approach or exceed the maximum coseismic surface slip and as such presented ongoing hazard to infrastructure. Using a laser scanner, we monitored postseismic deformation in three dimensions through time along 0.5 km of the main surface rupture. A key component of this study is the demonstration of proper alignment of repeat surveys using point cloud–based methods that minimize error imposed by both local survey errors and global navigation satellite system georeferencing errors. Using solid modeling of natural and cultural features, we quantify dextral postseismic displacement at several hundred points near the main fault trace. We also quantify total dextral displacement of initially straight cultural features. Total dextral displacement from both coseismic displacement and the first 2.5 d of postseismic displacement ranges from 0.22 to 0.29 m. This range increased to 0.33–0.42 m at 59 d post-earthquake. Furthermore, we estimate up to 0.15 m of vertical deformation during the first 2.5 d post-earthquake, which then increased by &sim;0.02 m at 59 d post-earthquake. This vertical deformation is not expressed as a distinct step or scarp at the fault trace but rather as a broad up-to-the-west zone of increasing elevation change spanning the fault trace over several tens of meters, challenging common notions about fault scarp development in strike-slip systems. Integrating these analyses provides three-dimensional mapping of surface deformation and identifies spatial variability in slip along the main fault trace that we attribute to distributed slip via subtle block rotation. These results indicate the benefits of laser scanner surveys along active faults and demonstrate that fine-scale variability in fault slip has been missed by traditional earthquake response methods.

California↗

USGS2015

Dynamic rupture models of earthquakes on the Bartlett Springs Fault, Northern California

The Bartlett Springs Fault (BSF), the easternmost branch of the northern San Andreas Fault system, creeps along much of its length. Geodetic data for the BSF are sparse, and surface creep rates are generally poorly constrained. The two existing geodetic slip rate inversions resolve at least one locked patch within the creeping zones. We use the 3-D finite element code FaultMod to conduct dynamic rupture models based on both geodetic inversions, in order to determine the ability of rupture to propagate into the creeping regions, as well as to assess possible magnitudes for BSF ruptures. For both sets of models, we find that the distribution of aseismic creep limits the extent of coseismic rupture, due to the contrast in frictional properties between the locked and creeping regions.

California↗

USGS2015

The 2014 Mw6.1 South Napa Earthquake: A unilateral rupture with shallow asperity and rapid afterslip

The M w 6.1 South Napa earthquake occurred near Napa, California on August 24, 2014 (UTC), and was the largest inland earthquake in Northern California since the 1989 M w 6.9 Loma Prieta earthquake. The first report of the earthquake from the Northern California Earthquake Data Center (NCEDC) indicates a hypocentral depth of 11.0km with longitude and latitude of (122.3105°W, 38.217°N). Surface rupture was documented by field observations and Lidar imaging (Brooks et al. 2014; Hudnut et al. 2014; Brocher et al., 2015), with about 12 km of continuous rupture starting near the epicenter and extending to the northwest. The southern part of the rupture is relatively straight, but the strike changes by about 15° at the northern end over a 6-km segment. The peak dextral offset was observed near the Buhman residence with right-.‐lateral motion of 46 cm, near the location where the strike of fault begins to rotate clock-.‐wise (Hudnut et al., 2014). The earthquake was well recorded by the strong motion network operated by the NCEDC, the California Geological Survey and the U.S. Geological Survey (USGS). There are about 12 sites within an epicentral distance of 15km, with relatively good azimuthal coverage (Fig.1). The largest peak-ground-velocity (PGV) of nearly 100 cm/s was observed on station 1765, which is the closest station to the rupture and lies about 3 km east of the northern segment (Fig. 1). The ground deformation associated with the earthquake was also well recorded by the high-resolution COSMO-SkyMed satellite and Sentinel-1A satellite, providing independent static observations.

California↗

USGS2015

The Mw6.0 24 August 2014 South Napa earthquake

The M w 6.0 South Napa earthquake, which occurred at 10:20 UTC 24 August 2014 was the largest earthquake to strike the greater San Francisco Bay area since the M w 6.9 1989 Loma Prieta earthquake. The rupture from this right‐lateral earthquake propagated mostly unilaterally to the north and up‐dip, directing the strongest shaking toward the city of Napa, where peak ground accelerations (PGAs) between 45% g and 61% g were recorded and modified Mercalli intensities (MMIs) of VII–VIII were reported. Tectonic surface rupture with dextral slip of up to 46 cm was observed on a 12.5 km long segment, some of which was along a previously mapped strand of the West Napa fault system, although the rupture extended to the north of the mapped Quaternary strand. Modeling of seismic and geodetic data suggests an average coseismic slip of 50 cm, with a maximum slip of about 1 m at depths of 10–11 km. We observed up to 35 cm of afterslip along the surface trace in the week following the mainshock, primarily along the southern half of the surface rupture that experienced relatively little coseismic offset. Relocation of the sparse aftershock sequence suggests en echelon southwest‐ and northeast‐dipping fault planes, reflective of the complex fault geometry in this region. The Napa basin and historic and late Holocene alluvial flood deposits in downtown Napa amplified the ground motions there. Few ground failures were mapped, reflecting the dry season (as well as a persistent drought that had lowered the groundwater table) and the short duration of strong shaking in the epicentral area.

California↗

USGS2015

Trench logs, terrestrial lidar system imagery, and radiocarbon data from the kilometer-62 site on the Greenville Fault, southeastern Alameda County, California, 2014

In 2014, we investigated an abrupt 8.5-meter (m), right-laterally deflected stream channel located near the Greenville Fault in southeastern Alameda County, California (-121.56224° E, 37.53430° N) that we discovered using 0.5-m resolution, 2011 aerial lidar imagery flown along the active fault trace. Prior to trenching we surveyed the site using a terrestrial lidar system (TLS) to document the exact geomorphic expression of this deflected stream channel before excavating a trench adjacent to it. We trenched perpendicular to the fault hoping to document the prehistoric history of earthquake ruptures along the fault. However, the alluvial stratigraphy that we document in these trench logs shows conclusively that this trench did not expose any active fault trace. Using other local geomorphic evidence for the fault location, a straight fault scarp immediately north of this stream projects slightly upslope of the west end of our trench and may be the actual location of the active fault trace. Five radiocarbon samples establish age control for the alluvial sequence documented in the trench, which may in the future be useful in constraining the long-term slip rate of the Greenville Fault. The deflection had been caused by an abrupt nontectonic termination of unit u30, a relatively thick (0.15–0.35 m) silt that is more erosion resistant than the adjacent cohesionless sand and gravel.

California↗

USGS2014

Using surface creep rate to infer fraction locked for sections of the San Andreas fault system in northern California from alignment array and GPS data

Surface creep rate, observed along five branches of the dextral San Andreas fault system in northern California, varies considerably from one section to the next, indicating that so too may the depth at which the faults are locked. We model locking on 29 fault sections using each section’s mean long‐term creep rate and the consensus values of fault width and geologic slip rate. Surface creep rate observations from 111 short‐range alignment and trilateration arrays and 48 near‐fault, Global Positioning System station pairs are used to estimate depth of creep, assuming an elastic half‐space model and adjusting depth of creep iteratively by trial and error to match the creep observations along fault sections. Fault sections are delineated either by geometric discontinuities between them or by distinctly different creeping behaviors. We remove transient rate changes associated with five large (M≥5.5) regional earthquakes. Estimates of fraction locked, the ratio of moment accumulation rate to loading rate, on each section of the fault system provide a uniform means to inform source parameters relevant to seismic‐hazard assessment. From its mean creep rates, we infer the main branch (the San Andreas fault) ranges from only 20%±10% locked on its central creeping section to 99%–100% on the north coast. From mean accumulation rates, we infer that four urban faults appear to have accumulated enough seismic moment to produce major earthquakes: the northern Calaveras (M 6.8), Hayward (M 6.8), Rodgers Creek (M 7.1), and Green Valley (M 7.1). The latter three faults are nearing or past their mean recurrence interval.

California↗

USGS2014

The earthquake cycle in the San Francisco Bay region: A.D. 1600–2012

Stress changes produced by the 1906 San Francisco earthquake had a profound effect on the seismicity of the San Francisco Bay region (SFBR), dramatically reducing it in the twentieth century. Whether the SFBR is still within or has emerged from this seismic quiescence is an issue of debate with implications for earthquake mechanics and seismic hazards. Historically, the SFBR has not experienced one complete earthquake cycle (i.e., the accumulation of stress, its release primarily as coseismic slip during surface‐faulting earthquakes, its re‐accumulation in the interval following, and its subsequent rerelease). The historical record of earthquake occurrence in the SFBR appears to be complete at about M 5.5 back to 1850 ( Bakun, 1999 ). For large events, the record may be complete back to 1776, which represents about half a cycle. Paleoseismic data provide a more complete view of the most recent pre‐1906 SFBR earthquake cycle, extending it back to about 1600. Using these, we have developed estimates of magnitude and seismic moment for alternative sequences of surface‐faulting paleoearthquakes occurring between 1600 and 1776 on the region’s major faults. From these we calculate seismic moment and moment release rates for different time intervals between 1600 and 2012. These show the variability in moment release and suggest that, in the SFBR regional plate boundary, stress can be released on a single fault in great earthquakes such as that in 1906 and in multiple ruptures distributed on the regional plate boundary fault system on a decadal time scale.

California↗

USGS2014

Logs and data from trenches across the Berryessa Fault at the Jerd Creek site, northeastern Napa County, California, 2011-2012

The primary purpose of this report is to provide drafted field logs of exploratory trenches excavated across the Berryessa Fault section of the northern Green Valley Fault (Lienkaemper, 2012; Lienkaemper and others, 2013) in 2011 and 2012 that show evidence for at least one surface-rupturing earthquake in the past few centuries. The site location and site detail are shown on sheet 1. The trench logs are shown on sheets 1, 2, 3 and 4. We also provide radiocarbon ages used for chronological modeling of the earthquake history and a field description of a soil profile in one trench. A formal report based on these logs and data is in preparation.

California↗

USGS2013

The Greenville Fault: preliminary estimates of its long-term creep rate and seismic potential

Once assumed locked, we show that the northern third of the Greenville fault (GF) creeps at 2 mm/yr, based on 47 yr of trilateration net data. This northern GF creep rate equals its 11-ka slip rate, suggesting a low strain accumulation rate. In 1980, the GF, easternmost strand of the San Andreas fault system east of San Francisco Bay, produced a M w 5.8 earthquake with a 6-km surface rupture and dextral slip growing to ≥2 cm on cracks over a few weeks. Trilateration shows a 10-cm post-1980 transient slip ending in 1984. Analysis of 2000-2012 crustal velocities on continuous global positioning system stations, allows creep rates of ~2 mm/yr on the northern GF, 0-1 mm/yr on the central GF, and ~0 mm/yr on its southern third. Modeled depth ranges of creep along the GF allow 5-25% aseismic release. Greater locking in the southern two thirds of the GF is consistent with paleoseismic evidence there for large late Holocene ruptures. Because the GF lacks large (>1 km) discontinuities likely to arrest higher (~1 m) slip ruptures, we expect full-length (54-km) ruptures to occur that include the northern creeping zone. We estimate sufficient strain accumulation on the entire GF to produce M w 6.9 earthquakes with a mean recurrence of ~575 yr. While the creeping 16-km northern part has the potential to produce a M w 6.2 event in 240 yr, it may rupture in both moderate (1980) and large events. These two-dimensional-model estimates of creep rate along the southern GF need verification with small aperture surveys.

California↗

USGS2013

A record of large earthquakes during the past two millennia on the southern Green Valley Fault, California

We document evidence for surface-rupturing earthquakes (events) at two trench sites on the southern Green Valley fault, California (SGVF). The 75-80-km long dextral SGVF creeps ~1-4 mm/yr. We identify stratigraphic horizons disrupted by upward-flowering shears and in-filled fissures unlikely to have formed from creep alone. The Mason Rd site exhibits four events from ~1013 CE to the Present. The Lopes Ranch site (LR, 12 km to the south) exhibits three events from 18 BCE to Present including the most recent event (MRE), 1610 ±52 yr CE (1σ) and a two-event interval (18 BCE-238 CE) isolated by a millennium of low deposition. Using Oxcal to model the timing of the 4-event earthquake sequence from radiocarbon data and the LR MRE yields a mean recurrence interval (RI or μ) of 199 ±82 yr (1σ) and ±35 yr (standard error of the mean), the first based on geologic data. The time since the most recent earthquake (open window since MRE) is 402 yr ±52 yr, well past μ~200 yr. The shape of the probability density function (pdf) of the average RI from Oxcal resembles a Brownian Passage Time (BPT) pdf (i.e., rather than normal) that permits rarer longer ruptures potentially involving the Berryessa and Hunting Creek sections of the northernmost GVF. The model coefficient of variation (cv, σ/μ) is 0.41, but a larger value (cv ~0.6) fits better when using BPT. A BPT pdf with μ of 250 yr and cv of 0.6 yields 30-yr rupture probabilities of 20-25% versus a Poisson probability of 11-17%.

California↗

USGS2012

Probabilistic estimates of surface coseismic slip and afterslip for Hayward fault earthquakes

We examine the partition of long‐term geologic slip on the Hayward fault into interseismic creep, coseismic slip, and afterslip. Using Monte Carlo simulations, we compute expected coseismic slip and afterslip at three alinement array sites for Hayward fault earthquakes with nominal moment magnitudes ranging from about 6.5 to 7.1. We consider how interseismic creep might affect the coseismic slip distribution as well as the variability in locations of large and small slip patches and the magnitude of an earthquake for a given rupture area. We calibrate the estimates to be consistent with the ratio of interseismic creep rate at the alinement array sites to the geologic slip rate for the Hayward fault. We find that the coseismic slip at the surface is expected to comprise only a small fraction of the long‐term geologic slip. The median values of coseismic slip are less than 0.2 m in nearly all cases as a result of the influence of interseismic creep and afterslip. However, afterslip makes a substantial contribution to the long‐term geologic slip and may be responsible for up to 0.5–1.5 m (median plus one standard deviation [S.D.]) of additional slip following an earthquake rupture. Thus, utility and transportation infrastructure could be severely impacted by afterslip in the hours and days following a large earthquake on the Hayward fault that generated little coseismic slip. Inherent spatial variability in earthquake slip combined with the uncertainty in how interseismic creep affects coseismic slip results in large uncertainties in these slip estimates.

California↗

USGS2012

Long-term creep rates on the Hayward Fault: Evidence for controls on the size and frequency of large earthquakes

The Hayward fault (HF) in California exhibits large (Mw 6.5–7.1) earthquakes with short recurrence times (161±65 yr), probably kept short by a 26%–78% aseismic release rate (including postseismic). Its interseismic release rate varies locally over time, as we infer from many decades of surface creep data. Earliest estimates of creep rate, primarily from infrequent surveys of offset cultural features, revealed distinct spatial variation in rates along the fault, but no detectable temporal variation. Since the 1989 Mw 6.9 Loma Prieta earthquake (LPE), monitoring on 32 alinement arrays and 5 creepmeters has greatly improved the spatial and temporal resolution of creep rate. We now identify significant temporal variations, mostly associated with local and regional earthquakes. The largest rate change was a 6‐yr cessation of creep along a 5‐km length near the south end of the HF, attributed to a regional stress drop from the LPE, ending in 1996 with a 2‐cm creep event. North of there near Union City starting in 1991, rates apparently increased by 25% above pre‐LPE levels on a 16‐km‐long reach of the fault. Near Oakland in 2007 an Mw 4.2 earthquake initiated a 1–2 cm creep event extending 10–15 km along the fault. Using new better‐constrained long‐term creep rates, we updated earlier estimates of depth to locking along the HF. The locking depths outline a single, &sim;50‐km‐long locked or retarded patch with the potential for an Mw&sim;6.8 event equaling the 1868 HF earthquake. We propose that this inferred patch regulates the size and frequency of large earthquakes on HF.

California↗

USGS2012

Recently Active Traces of the Berryessa Fault, California: A Digital Database

The purpose of this map is to show the location of and evidence for recent movement on active fault traces within the Berryessa section and parts of adjacent sections of the Green Valley Fault Zone, California. The location and recency of the mapped traces is primarily based on geomorphic expression of the fault as interpreted from large-scale 2010 aerial photography and from 2007 and 2011 0.5 and 1.0 meter bare-earth LiDAR imagery (that is, high-resolution topographic data). In a few places, evidence of fault creep and offset Holocene strata in trenches and natural exposures have confirmed the activity of some of these traces. This publication is formatted both as a digital database for use within a geographic information system (GIS) and for broader public access as map images that may be browsed on-line or download a summary map . The report text describes the types of scientific observations used to make the map, gives references pertaining to the fault and the evidence of faulting, and provides guidance for use of and limitations of the map.

California↗