Geology topics

James G. Flocks

Publications and source records attributed to James G. Flocks.

At least 19 recordsLinked to original sources

USGS2023

Evaluating oil and gas industry two-dimensional multichannel seismic data for use in near-surface assessment of geologic framework and potential marine minerals resources

Marine seismic reflection data acquired across the Gulf of Mexico during oil and gas exploration are available to the public through an online database archive. The data are archived as two-dimensional multichannel seismic data in two digital formats. The formats include image files in portable document format (PDF), and binary files in industry standard Society for Exploration Geophysicists revision Y (SEG-Y) format. Also included in the database are navigation files and acquisition information associated with the collection of the data. This study examines the data acquired within two geographic areas in the northern Gulf of Mexico. Although the seismic reflection data are acquired for oil and gas exploration many kilometers below the seafloor, this study focuses on the feasibility of using the data for near-surface geologic and seafloor morphologic studies (<100 meters below the seafloor). The report outlines the methodologies used to recover and process the data, including computer processing steps to convert the PDF imagery into SEG-Y format. The report includes two-dimensional profiles of the data to demonstrate the efficacy of the data in near-surface geologic studies. The study found that, for the two areas of interest, the seafloor reflectors in most of the available data are not resolvable. Although the data are readily available and computer processing can adequately image the uppermost reflectors of the seismic profiles, the resolution of the data in most cases are not suitable for near-surface geologic evaluations.

Alabama, Florida, Louisiana, Mississippi, Texas↗

USGS2023

Analysis of high-resolution single channel seismic data for use in sediment resource evaluation, eastern Texas and western Louisiana Continental Shelf, Gulf of Mexico

Shallow subsurface geologic data recorded as high-resolution seismic profiles are used to interpret the geology of coastal and marine systems. These data were originally recorded on paper rolls that are stored in geophysical archives. Data collection has since converted to entirely digital formats, yet the analog data are still useful for geologic interpretation. This report describes the process of recovering analog copies of seismic profiles from physical archives, electronically scanning, and converting them to industry-standard digital format. The recovered data are also reviewed and assessed for potential sediment resources. The data recovered in this study were collected from the Gulf of Mexico continental shelf offshore of East Texas and West Louisiana. The project is a collaborative study between the U.S. Geological Survey and the Bureau of Ocean Energy Management.

Louisiana, Texas↗

USGS2022

Documenting the multiple facets of a subsiding landscape from coastal cities and wetlands to the continental shelf

Land subsidence is a settling, sinking, or collapse of the land surface. In the southeastern United States, subsidence is frequently observed as sinkhole collapse in karst environments, wetland degradation and loss in coastal and other low-lying areas, and inundation of coastal urban communities. Human activities such as fluid extraction, mining, and overburden alteration can cause or exacerbate subsidence, which can result in damage to infrastructure and resources. Subsidence is a hazard that takes place throughout the United States; however, a systematic approach to recognize and develop informed responses to the drivers of subsidence has not yet been fully established. To address this problem, the U.S. Geological Survey (USGS) Southeast Region (SER) funded the gathering of a team of interdisciplinary USGS scientists to promote scientific collaboration. Southeast Region scientists welcomed scientists from other regions (see table 1.1 in Appendix 1) in September 2018 at the St. Petersburg Coastal and Marine Science Center (SPCMSC) in Florida for the first workshop of the Subsidence Flex Team (SFT) (see Appendix 2 for agenda). The SFT set out to review subsidence-related research and technology and develop a unifying framework for describing the processes and hazards associated with land subsidence. A more comprehensive understanding of subsidence hazards could help to inform regional vulnerability assessments that would prove invaluable to the public, community developers, policy makers, and resource managers in both inland and coastal states. The SFT analyzed USGS strengths and weaknesses to identify existing infrastructure and capabilities that could be leveraged to create a comprehensive and far-reaching subsidence-monitoring and mitigation program. Over the course of the 2-day workshop, interdisciplinary understandings of the processes and hazards related to subsidence were explored through individual presentations and group discussion. With all perspectives considered, the SFT recommended that subsidence-related research develop scientific approaches and metrics by which the subsidence component can be isolated and quantified in order to protect both the environment and human infrastructure from harm.

Alabama, Florida, Louisiana, Mississippi↗

USGS2022

Chandeleur Islands to Breton Island bathymetric and topographic datasets and operational sediment budget development: Methodology and analysis report

This study is part of the Coastal Protection and Restoration Authority (CPRA) Louisiana Barrier Island Comprehensive Monitoring (BICM) program. The goal of the BICM program is to provide long-term data on the barrier islands of Louisiana for monitoring change and assisting in coastal management. The BICM program uses historical data and acquires new data to map and monitor shoreline position, sediment properties, topography, bathymetry, and habitat. Since 2006, the U.S. Geological Survey (USGS) has collected geophysical and sedimentologic data across the Breton National Wildlife Refuge (BNWR) through the BICM program and collaborative USGS projects such as the Barrier Island Evolution Research project (under CPRA contract number 2000339324, BICM2–Chandeleurs TopoBathy DEM), which builds upon the previous BICM physical assessment of the BNWR outlined in a separate report. This project uses topographic and bathymetric data from three periods (1917–1922, 2006–2007, and 2013–2015) to develop digital elevation models (DEMs), measure elevation change, and calculate sediment budgets for the barrier island system. The sediment budget analysis, derived from the volumetric change between the three periods, is necessary for understanding sediment transport dynamics along barrier islands and providing information for effective coastal management. This report describes the methods used to acquire, process, and produce these products.

Louisiana↗

USGS2022

Chenier Plain region bathymetric and topographic datasets: Methodology report

The goal of the Louisiana Barrier Island Comprehensive Monitoring (BICM) program is to provide long-term data on coastal Louisiana for monitoring change and assisting in coastal management. This study (carried out under Coastal Protection and Restoration Authority contract number 2000339324, BICM2—Chenier TopoBathy DEM) builds upon the previous BICM physical assessment of the Chenier Plain region using bathymetric data from three periods (1930, 2007, and 2017) to develop digital elevation models for historical and current periods. In addition to bathymetric datasets, the study includes light detection and ranging elevation measurements along the coastline to produce elevation datasets for the 2007 and 2017 periods. This report describes the methods used to acquire, process, and produce these products.

Louisiana↗

USGS2021

Impacts of sediment removal from and placement in coastal barrier island systems

Executive Summary On June 24, 2019, Congressman Raul Grijalva of Arizona, Chair of the House Committee on Natural Resources, sent a letter to the directors of the U.S. Fish and Wildlife Service and the U.S. Geological Survey to request their assistance in answering questions regarding coastal sediment resource management within the Coastal Barrier Resources System as defined by the Coastal Barrier Resources Act (Public Law 97–348; 96 Stat. 1653; 16 U.S.C. 3501 et seq.). For the purposes of this response, coastal sediment resource management refers to the removal of sediment from one part of a barrier island system for placement in another part of the coastal system, for either hazard mitigation (for example, erosion or flood control) or coastal restoration (for example, expansion or restoration of beach, dune, and [or] marsh habitats). The specific topics of concern are as follows (paraphrased from Congressman Grijalva’s letter): 1. Disruption of coastal sediment supply resulting from sediment removal and placement, including the replenishment rate of removed sediments and impacts to other components of the barrier island system (discussed in sec. 3). 2. Physical and biological impacts of sediment removal and placement on benthic habitats (discussed in sec. 4). 3. Impacts of sediment removal and placement on fish and other marine species (discussed in sec. 5). 4. Changes in migratory bird nesting and foraging habitats resulting from sediment removal and placement (discussed in sec. 6). 5. Long-term impacts of sediment removal and placement on physical coastal resiliency (discussed in sec. 7).

Open-File Report↗

USGS2020

Louisiana Coastal Zone sediment characterization; comparison of sediment grain sizes for samples collected in 2008 and 2015–2016 from the western Chenier plain to the Chandeleur Islands, Louisiana—Louisiana Barrier Island Comprehensive Monitoring (BICM) Program

Repeated sampling and grain-size analysis of surficial sediments along the sandy shorelines of Louisiana is necessary to characterize coastal-zone sediment properties and evaluate sediment transport patterns within the nearshore environments. In 2008, and again in 2015 and 2016, sediment grab samples were collected along the shorelines of the western Chenier plain, the Isles Dernieres (Raccoon, Whiskey, Trinity and East Islands), the Lafourche delta (Timbalier Islands, Caminada Headland, and Grand Isle), the modern delta (Grand Terre Islands from Chaland Headland to Sandy Point), and the Chandeleur Islands (from Curlew Island to Hewes Point). The samples were collected as part of the Louisiana Coastal Protection and Restoration Authority (CPRA) Barrier Island Comprehensive Monitoring (BICM) Program in collaboration with the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS–SPCMSC) and the University of New Orleans Pontchartrain Institute for Environmental Studies (UNO–PIES). Physical properties of the samples (sediment grain size and sorting) were measured and provided in data reports to CPRA. Additional samples collected by the USGS from around Breton Island in 2014 and 2015 supplemented the 2015–2016 BICM data to complete the coastwide dataset. This report compares the results of the 2008 and 2015–2016 sedimentologic analyses and documents changes in composition (percent sand) and mean sediment grain size between the two time periods. At most sample sites, differences in mean grain size varied by less than ±0.25 Φ. The largest changes occurred at sites located near tidal inlets or along rapidly eroding shorelines.

Louisiana↗

USGS2019

Application of sediment end-member analysis for understanding sediment fluxes, northern Chandeleur Islands, Louisiana

We analyzed grain-size distributions (GSDs) from a time-series of sediment samples to evaluate sediment transport following anthropogenic sand-berm emplacement at the northern Chandeleur Islands, Louisiana. End-member analysis (EMA) was applied to compare the end-member (EM) GSD of a known sediment source to GSDs from surrounding environments and characterize the physical redistribution of source sediment over time. Although we successfully modeled a proxy borrow-source EM using pre-emplacement (2007-2008) datasets, this EM is not easily distinguishable from the modeled emergent-island EM, possibly because the baseline dataset did not provide the necessary sample distribution to distinguish the range of depositional environments. Comparison of post-emplacement (2012) samples from the berm and natural island with the proxy borrow-source EM suggests that this application of EMA can be a valuable tool for understanding sediment redistribution subsequent to restoration efforts, especially if the GSDs of the emplaced and naturally-occurring sediments are dissimilar and adequately sampled.

Louisiana↗

USGS2018

Nearshore single-beam bathymetry data collected in 2015, Dauphin Island, Alabama

Dauphin Island, Alabama, is a barrier island located in the northern Gulf of Mexico that supports local residences, tourism, commercial infrastructure, and historic Fort Gaines. During the past decade, Dauphin Island was affected by several major hurricanes—Hurricanes Ivan (2004), Katrina (2005), and Isaac (2012)—and storms, along with sea-level rise, continue to present a threat to island stability. State and Federal managers are using a scientific approach to identify, formulate, and implement a long-term plan to provide restoration options for Dauphin Island, thereby helping increase its resilience against future storms and sea-level rise. Island morphology, including current bathymetry and shoreline data, is one scientific domain being investigated in an effort to produce a comprehensive restoration plan funded by an interagency grant from the National Fish and Wildlife Foundation Gulf Environmental Benefit Fund . In August 2015, the U.S. Geological Survey ( USGS ) St. Petersburg Coastal and Marine Science Center ( SPCMSC ), in cooperation with the U.S. Army Corps of Engineers at the U.S. Army Engineer Research and Development Center, Mobile District, and the State of Alabama, conducted bathymetric surveys of the nearshore waters surrounding Dauphin Island. This report provides a detailed methodology for the data acquisition and post-processing of 1,165-line kilometers (km) of single-beam bathymetry data collected under the USGS–SPCMSC Alabama Barrier Island Restoration Study . These data were acquired and processed under USGS field activity number 2015–326–FA . Data are provided in three datums: (1) the International Terrestrial Reference Frame of 2000, ellipsoid height (from –47.04 meters (m) to –29.36 m); (2) the North American Datum of 1983, CORS96 realization (NAD83 (CORS96)) horizontal, and the North American Vertical Datum 1988 GEOID12A vertical (from –0.24 m to –17.33 m); and (3) NAD83 (CORS96) horizontal, and mean lower low water vertical (from –0.12 m to –17.93 m). The x,y,z point datasets, trackline shapefiles, digital and handwritten Field Activity Collection Systems logs, one 50-m digital elevation model, and formal Federal Geographic Data Committee metadata are obtainable from the Data Downloads page or the associated USGS data release .

Alabama↗

USGS2018

Nearshore coastal bathymetry data collected in 2016 from West Ship Island to Horn Island, Gulf Islands National Seashore, Mississippi

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center, in cooperation with the U.S. Army Corps of Engineers, Mobile District, conducted bathymetric surveys of the nearshore waters surrounding Ship and Horn Islands, Gulf Islands National Seashore, Mississippi. The objective of this study was to establish base-level elevation conditions around West Ship, East Ship, and Horn Islands and their associated active littoral system prior to restoration activities. These activities include the closure of Camille Cut and the placement of sediment in the littoral zone of East Ship Island. These surveys can be compared with future surveys to monitor sediment migration patterns post-restoration and can also be measured against historic bathymetric datasets to further our understanding of island evolution. The USGS collected 667 line-kilometers (km) of single-beam bathymetry data and 844 line-km of interferometric swath bathymetry data in July 2016 under Field Activity Number 2016-347-FA. Data are provided in three datums: (1) the International Terrestrial Reference Frame of 2000 (ellipsoid height); (2) the North American Datum of 1983 (NAD83) CORS96 realization and the North American Vertical Datum of 1988 with respect to the GEOID12B model (orthometric height); and (3) NAD83 (CORS96) and Mean Lower Low Water (tidal datum). Data products, including x,y,z point datasets, trackline shapefiles, digital and handwritten Field Activity Collection Systems logs, 50-meter digital elevation model, and formal Federal Geographic Data Committee metadata, are available for download.

Mississippi↗

USGS2017

Analysis of seafloor change around Dauphin Island, Alabama, 1987–2015

Dauphin Island is a 26-km-long barrier island located southwest of Mobile Bay, Alabama, in the north-central Gulf of Mexico. The island contains sandy beaches, dunes, maritime forests, freshwater ponds and intertidal wetlands, providing habitat for many endangered and threatened species. Dauphin Island also provides protection for and maintains estuarine conditions within Mississippi Sound, supporting oyster habitat and seagrasses. Wetland marshes along the Alabama mainland are protected by the island from wave-induced erosion during storms approaching from the Gulf of Mexico. Over the years, the island has been eroded by storms, most recently by Hurricane Ivan (2004) and Hurricane Katrina (2005) (Ivan/Katrina), which breached the island along its narrowest extent and caused damage to infrastructure. Along with storms producing significant episodic change, long-term beach erosion has exposed numerous pine tree stumps in the shoreface. The stumps are remnants of past maritime forests and reflect the consistent landward retreat of the island. Island change has prompted the State of Alabama to evaluate restoration alternatives to increase island resilience and sustainability by protecting and preserving the natural habitat, and by understanding the processes that influence shoreline change. Under a grant from the National Fish and Wildlife Foundation, restoration alternatives are being developed that will allow the State to make decisions on engineering and ecological restoration designs based on scientific analysis of likely outcomes and tradeoffs between impacts to stakeholder interests. Science-based assessment of the coastal zone requires accurate and up-to-date baseline data to provide a valid image of present conditions and to support modeling of coastal processes. Bathymetric elevation measurements are essential to this requirement. In August 2015, the U.S. Army Corps of Engineers and the U.S. Geological Survey conducted single beam and multibeam bathymetric surveys around Dauphin Island using a variety of shallow draft vessels and equipment. More than 95 square kilometers of seafloor was imaged. The data were integrated into a seamless digital elevation model to provide a high-resolution bathymetric map of the seafloor extending 9.5 kilometers seaward from the island’s eastern end and approximately 2 km along the rest of the island on the gulf and sound sides. Water depths range from 0.3 to 15.0 meters (m), with depths greater than 10.0 m constrained to the Mobile ship channel on the extreme eastern flank of the coverage. To measure seafloor change, two periods of historic hydrographic survey data were acquired from the National Oceanic and Atmospheric Administration National Centers for Environmental Information data archive. The two timeframes (1987–1988 and 2005–2007) were selected for their completeness of spatial coverage and because they encompass a period of significant storm impacts to the island. These timeframes were compared to each other and with the 2015 dataset to monitor elevation gain (sediment accretion) and elevation loss (sediment erosion) over time. Sediment dynamics is by far the most significant driver of nearshore elevation change in this area. The Mississippi-Alabama inner shelf is a passive margin, and other influences on elevation change (for example, tectonic adjustment, Holocene subsidence, and eustatic sea-level rise) are neither significant nor variable enough over this time period to have an imprint.

Alabama↗

USGS2017

Digitized analog boomer seismic-reflection data collected during U.S. Geological Survey cruises Erda 90-1_HC, Erda 90-1_PBP, and Erda 91-3 in Mississippi Sound, June 1990 and September 1991

The U.S. Geological Survey (USGS) Coastal and Marine Geology Program has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic-reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters long. A large portion of this data resides in a single repository with minimal metadata. As part of the National Geological and Geophysical Data Preservation Program, scientists at the USGS St. Petersburg Coastal and Marine Science Center are converting the analog paper records to digital format using a large-format continuous scanner. This report, along with the accompanying USGS data release (Bosse and others, 2017), serves as an archive of seismic profiles with headers, converted Society of Exploration Geophysicists Y format (SEG-Y) files, navigation data, and geographic information system data files for digitized boomer seismic-reflection data collected from the Research Vessel (R/V) Erda during two cruises in 1990 and 1991. The Erda 90-1 geophysical cruise was conducted in two legs. The first leg included seismic data collected from the Hancock County region of the Mississippi Sound (Erda 90-1_HC) from June 4 to June 6, 1990. The second leg included seismic data collected from the Petit Bois Pass area of Mississippi Sound (Erda 90-1_PBP) from June 8 to June 9, 1990. The Erda 91-3 cruise occurred between September 12 and September 23, 1991, and surveyed the Mississippi Sound region just west of Horn Island, Mississippi.

Data Series↗

USGS2017

Coastal single-beam bathymetry data collected in 2015 from Raccoon Point to Point Au Fer Island, Louisiana

As part of the Barrier Island Comprehensive Monitoring Program (BICM), scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted a nearshore single-beam bathymetry survey along the south-central coast of Louisiana, from Raccoon Point to Point Au Fer Island, in July 2015. The goal of the BICM program is to provide long-term data on Louisiana’s coastline and use this data to plan, design, evaluate, and maintain current and future barrier island restoration projects. The data described in this report will provide baseline bathymetric information for future research investigating island evolution, sediment transport, and recent and long-term geomorphic change, and will support modeling of future changes in response to restoration and storm impacts. The survey area encompasses more than 300 square kilometers of nearshore environment from Raccoon Point to Point Au Fer Island. This data series serves as an archive of processed single-beam bathymetry data, collected from July 22–29, 2015, under USGS Field Activity Number 2015-320-FA. Geographic information system data products include a 200-meter-cell-size interpolated bathymetry grid, trackline maps, and point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata.

Louisiana↗

USGS2017

Sediment data collected in 2014 and 2015 from around Breton and Gosier Islands, Breton National Wildlife Refuge, Louisiana

Breton Island, located at the southern end of the Chandeleur Islands, supports one of Louisiana’s largest historical brown pelican ( Pelecanus occidentalis ) nesting colonies. Although the brown pelican was delisted as an endangered species in 2009, nesting areas are threatened by continued land loss and are extremely vulnerable to storm impacts. The U.S. Fish and Wildlife Service proposed to restore Breton Island to pre-Hurricane Katrina conditions through rebuilding the shoreface, dune, and back-barrier marsh environments. Prior to restoration, scientists from the U.S. Geological Survey’s (USGS) St. Petersburg Coastal and Marine Science Center Geologic and Morphologic Evolution of Coastal Margins project collected high-resolution geophysical (topography, bathymetry, and sub-bottom profiles) and sedimentologic data from around Breton Island to characterize the geologic framework of the island platform, nearshore, and shelf environments. These data will be used to characterize the geologic framework around Breton Island, identify potential borrow areas for restoration efforts, quantify seafloor change, and provide information for sediment transport and morphologic change models to assess island response to restoration and natural processes. This report, along with the accompanying USGS data release, serves as an archive of sediment data from vibracores, push cores, and submerged grab samples collected from around Breton and Gosier Islands, Louisiana, during two surveys conducted in July 2014 and January 2015 (USGS Field Activity Numbers 2014–314–FA and 2014–336–FA, respectively). Sedimentologic and stratigraphic metrics (for example, sediment texture or unit thicknesses) derived from these data can be used to ground-truth the geophysical data and characterize potential sand resources or can be incorporated into sediment transport or morphologic change models. Data products, including sample location tables, descriptive core logs, core photographs and x-radiographs, results of sediment grain-size analyses, and geographic information system data files with accompanying formal Federal Geographic Data Committee metadata can be downloaded from the accompanying data release.

Louisiana↗

USGS2017

Coastal single-beam bathymetry data collected in 2015 from the Chandeleur Islands, Louisiana

As part of the Louisiana Coastal Protection and Restoration Authority (CPRA) Barrier Island Comprehensive Monitoring Program, scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted a single-beam bathymetry survey around the Chandeleur Islands, Louisiana, in June 2015. The goal of the program is to provide long-term data on Louisiana’s barrier islands and use this data to plan, design, evaluate, and maintain current and future barrier island restoration projects. The data described in this report, along with (1) USGS bathymetry data collected in 2013 as a part of the Barrier Island Evolution Research project covering the northern Chandeleur Islands, and (2) data collected in 2014 in collaboration with the Louisiana CPRA Barrier Island Comprehensive Monitoring Program around Breton Island, will be used to assess bathymetric change since 2006‒2007 as well as serve as a bathymetric control in supporting modeling of future changes in response to restoration and storm impacts. The survey area encompasses approximately 435 square kilometers of nearshore and back-barrier environments around Hewes Point, the Chandeleur Islands, and Curlew and Grand Gosier Shoals. This Data Series serves as an archive of processed single-beam bathymetry data, collected in the nearshore of the Chandeleur Islands, Louisiana, from June 17‒24, 2015, during USGS Field Activity Number 2015-317-FA. Geographic information system data products include a 200-meter-cell-size interpolated bathymetry grid, trackline maps, and xyz point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata.

Louisiana↗

USGS2017

Coastal bathymetry data collected in 2013 from the Chandeleur Islands, Louisiana

As part of the Barrier Island Evolution Research Project, scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted nearshore geophysical surveys around the northern Chandeleur Islands, Louisiana, in July and August of 2013. The objective of the study is to better understand barrier-island geomorphic evolution, particularly storm-related depositional and erosional processes that shape the islands over annual to interannual timescales (1‒5 years). Collecting geophysical data will allow us to identify relationships between the geologic history of the island and its present day morphology and sediment distribution. This mapping effort was the third in a series of three planned surveys in this area. High resolution geophysical data collected in each of three consecutive years along this rapidly changing barrier island system will provide a unique time-series dataset that will significantly further the analyses and geomorphological interpretations of this and other coastal systems, improving our understanding of coastal response and evolution over short time scales (1‒5 years). This data series includes the geophysical data that were collected during two cruises (USGS Field Activity Numbers (FAN) 13BIM02, 13BIM03, and 13BIM04, in July 2013; and FANs 13BIM07 and 13BIM08 in August 2013) aboard the R/V Sallenger , the R/V Jabba Jaw , and the R/V Shark along the northern portion of the Chandeleur Islands, Breton National Wildlife Refuge, Louisiana. Primary data were acquired with the following equipment: (1) a Systems Engineering and Assessment, Ltd., SWATHplus interferometric sonar (468 kilohertz [kHz]), (2) an EdgeTech 424 (4‒24 kHz) chirp sub-bottom profiling system, and (3) two Odom Hydrographic Systems, Incorporated, Echotrach CV100 single beam echosounders. This data series report serves as an archive of processed interferometric swath and single-beam bathymetry data. Geographic information system data products include an interpolated digital elevation model, trackline maps, and point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata.

Louisiana↗

USGS2016

Archive of bathymetry and backscatter data collected in 2014 nearshore Breton and Gosier Islands, Breton National Wildlife Refuge, Louisiana

As part of the Barrier Island Monitoring Project, scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted nearshore geophysical surveys off Breton and Gosier Islands, Louisiana, in July and August of 2014. To assist the United States Fish and Wildlife Service (USFWS) with restoration planning efforts, the USGS was tasked with answering fundamental questions about the physical environment of the southern Chandeleur Islands, including the geology, morphology, and oceanography. Baseline data needed to answer these questions were either insufficient or missing. The USGS conducted a comprehensive geologic investigation in the summer of 2014, collecting geophysical and sedimentological data. Breton Island, located at the southern end of the Chandeleur Island chain in southeastern Louisiana, was recognized as a natural, globally significant nesting sanctuary for several bird species and was established as the Breton National Wildlife Refuge (NWR) in 1904. The areal extent of Breton Island has diminished 90 percent since 1920. Land loss is attributed to ongoing relative sea-level rise, diminished sediment supply, and storm impacts. The bird population on Breton Island has also declined over the years, most notably after Hurricane George in 1998 and after Hurricane Katrina in 2015; the latter completely submerged the island. Despite decreasing habitable acreage, migratory seabirds continue to return and nest on Breton Island. To prevent the island from being submerged in the future, and to protect, stabilize, and provide more nesting and foraging areas for the bird population, the USFWS proposed a restoration effort to rebuild Breton Island to its pre-Katrina footprint. This data series serves as an archive of processed interferometric swath and single-beam bathymetry data, and side-scan sonar data, collected in the nearshore of Breton and Gosier Islands, NWR, Louisiana. The data were collected during two USGS cruises (USGS Field Activity Numbers 2014-314-FA and 2014-317-FA) in July and August 2014. Geographic information system data products include a 100-meter-cell-size interpolated bathymetry grid, trackline maps, and point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata. NOTE: These data are scientific in nature and are not to be used for navigation. Any use of trade names is for descriptive purposes only and does not imply endorsement by the U.S. Government.

Louisiana↗

USGS2016

Analysis of seafloor change at Breton Island, Gosier Shoals, and surrounding waters, 1869–2014, Breton National Wildlife Refuge, Louisiana

Characterizing bathymetric change in coastal environments is an important component in understanding shoreline evolution, especially along barrier island platforms. Bathymetric change is a function of the regional sediment budget, long-term wave and current patterns, and episodic impact from high-energy events such as storms. Human modifications may also cause changes in seafloor elevation. This study, conducted by the U.S. Geological Survey in collaboration with the U.S. Fish and Wildlife Service, evaluates bathymetric and volumetric change and sediment characteristics around Breton Island and Gosier Shoals located offshore of the Mississippi River Delta in Louisiana. This area has been affected by significant storm events such as Hurricane Katrina in 2005. Sedimentation patterns at Breton Island and offshore have also been modified by the excavation of a shipping channel north of the island. Four time periods are considered that encompass these episodes and include long-term change and short-term storm recovery: 1869–2014, 1869–1920, 1920–2014, and 2007–2014. Finally, sediment characteristics are reported in the context of seafloor elevation.

Louisana↗