Search USGS⌕ Search

Geology topics

Jacob B. Lowenstern

Publications and source records attributed to Jacob B. Lowenstern.

At least 19 recordsLinked to original sources
USGS2025

The systematics of stable hydrogen (δ2H) and oxygen (δ18O) isotopes and tritium (3H) in the hydrothermal system of the Yellowstone Plateau volcanic field, USA

To improve our understanding of hydrothermal activity on the Yellowstone Plateau volcanic field, we collected and analyzed a large data set of δ 2 H, δ 18 O, and the 3 H concentrations of circum-neutral and alkaline waters. We find that (a) hot springs are fed by recharge throughout the volcanic plateau, likely focused through fractured, permeable tuff units. Previous work had stressed the need for light δ 2 H water recharge restricted to the northern part of the plateau or recharge during past cold periods. However, new data from the Y-7 drill hole suggests that recharge is not restricted to a certain area or a cold period. (b) δ 18 O values of thermal waters in the geyser basins are shifted from the global meteoric water line by temperature-dependent water-rock reactions with higher subsurface temperatures resulting in a greater shift. (c) Large temporal variations in the isotopic composition of meteoric water recharge and small temporal variability in the isotopic composition of hot spring discharge implies that the volume of groundwater in, and around the Yellowstone caldera is substantially larger than the volume of annual water recharge. (d) Hot springs discharged through different rhyolitic units correlate with identifiable differences in δ 2 H and δ 18 O compositions, 3 H concentrations, and water chemistry that imply equilibration at different temperatures and travel along different flow paths. (e) Based on measured 3 H concentrations, we calculate that hot spring waters in the central part of the geyser basins mostly contain <2% post-1950 meteoric water, whereas waters discharged at the basin margins contain larger fractions of post-1950s meteoric water.

Wyoming↗
USGS2025

Magmatic volatiles in the Yellowstone Plateau volcanic field: The knowns, the unknowns, and the uncertainties

The Yellowstone Plateau volcanic field has a large magmatic system supplying heat and mass into the overlying hydrothermal system. To interpret changes in the composition and/or emission rates of hydrothermal fluids as possible indicators of volcanic unrest requires discriminating between magmatic, crustal, hydrothermal, and hybrid sources and processes. Significant progress in characterizing the composition and rates of hydrothermal fluid discharge has been made over the past two decades but many uncertainties about sources and processes remain.

Wyoming↗
USGS2024

Radiogenic strontium- and uranium-isotope tracers of water-rock interactions and hydrothermal flow in the Upper Geyser Basin, Yellowstone Plateau Volcanic Field, USA

Natural radiogenic isotopes (primarily 87 Sr/ 86 Sr) from hot springs in the Upper Geyser Basin of the Yellowstone Plateau volcanic field and associated rocks were used to evaluate groundwater flow patterns, water-rock reactions, and the extent of mixing between various groundwater sources. Thermal waters have very low uranium concentrations and 234 U/ 238 U activity ratios near 1.0, which limit their utility as tracers in this reducing setting. Thermal waters have higher Sr concentrations (<22 ng/g) and a wide range of 87 Sr/ 86 Sr values that vary both temporally at individual discharge sites and between adjacent springs, indicating that conduits tap different subsurface reservoirs to varying degrees. Sr from local rhyolites have 87 Sr/ 86 Sr compositions that bound the range of values observed in groundwater throughout the basin. Non-boiling springs on the west flank of the basin discharge water with low 87 Sr/ 86 Sr consistent with flow through young volcanic rocks exposed at the surface. Boiling springs in the central basin have higher 87 Sr/ 86 Sr values reflecting interactions with older, more radiogenic volcanic rocks. Variability in upwelling thermal waters requires mixing with a low 87 Sr/ 86 Sr component derived from young lava or glacial sediments, or more likely, from deeper sources of hot groundwater circulating through buried Lava Creek Tuff having intermediate 87 Sr/ 86 Sr. Isotope data constrain basin-wide output of thermal water to 110–140 kg·s −1 . Results underscore the utility of radiogenic Sr isotopes as valuable tracers of hydrothermal flow patterns and improve the understanding of temperature-dependent water-rock reactions in one of the largest continental hydrothermal systems on Earth.

Wyoming↗
USGS2024

Introduction to recommended capabilities and instrumentation for volcano monitoring in the United States

Introduction The National Volcano Early Warning System (NVEWS) was authorized and partially funded by the U.S. Government in 2019. In response, the U.S. Geological Survey (USGS) Volcano Hazards Program asked its scientists to reflect on and summarize their views of best practices for volcano monitoring. The goal was to review and update the recommendations of a previous report (Moran and others, 2008) and to provide a more detailed analysis of capabilities and instrumentation for monitoring networks for U.S. volcanoes. This Scientific Investigations Report and its chapters reflect those USGS scientists’ views and summaries and will serve as a guide for future network upgrades funded through NVEWS. Given the well-documented hazards posed by volcanoes to population centers and aviation (for example, Blong, 1984; Scott, 1989; Neal and others, 1997, 2019; Guffanti and others, 2010; Shroder and Papale, 2014; Prata and Rose, 2015; Palmer, 2020), volcano monitoring is critical for ensuring public safety and for mitigating the impacts of volcanic activity. Accurate and timely forecasts are facilitated by well-designed monitoring networks that are in place long enough to allow for background behavior to be recognized and understood. Because precursory signals may be limited and unrest may progress rapidly to an eruption, our goal is to deploy monitoring systems that enable detection of the reactivation of dormant volcanoes as early as possible, allowing for public safety and risk mitigation. NVEWS planning is also informed by the results of Ewert and others (2005, 2018), whereby 161 U.S. volcanoes are currently categorized and ranked commensurate with their relative threat. In each chapter, author(s) considered the need for some redundancy of instrumentation and telemetry, given the likelihood of occasional equipment failure, particularly in extreme and remote environments. Establishing digital telemetry networks requires advanced planning, sighting, radio-shot testing, and, inevitably, troubleshooting in the field. This is harder to achieve rapidly during a crisis; thus, an important goal for monitoring U.S. volcanoes is to establish digital telemetry backbones with redundancy and extra capacity to absorb additional instruments should a volcano begin to exhibit signs of unrest (fig. A1). The National Telecommunications and Information Administration (NTIA) imposed new regulations in the United States, eliminating the use of older analog radios for many purposes, which had been one previous means for redundant data delivery. However, the resulting conversion from analog to digital systems usefully enables stations to accommodate new and multivariate real-time data streams (for example, Global Navigation Satellite System [GNSS] receivers, infrasound arrays, gas spectrometers, visible and infrared cameras, and broadband seismometers). We note that other USGS and broader national and international hazard programs can leverage NVEWS instrumentation plans. Examples of this include the following: Improved seismic coverage of volcanoes will increase the capability of the USGS Earthquake Hazards Program to detect and locate earthquakes, estimate ground shaking, and provide timely early warnings through the ShakeAlert Earthquake Early Warning System (Given and others, 2018). The National Oceanic and Atmospheric Administration’s Tsunami Program will benefit from additional seismic stations, particularly within the sparsely instrumented Aleutian Islands, Northern Mariana Islands, and American Samoa. Infrasound stations can detect signals from landslides, debris flows and lahars, floods, and weather events, providing benefits to the National Weather Service and the USGS Landslide Hazards Program.

Scientific Investigations Report↗
USGS2024

Special topic—Boreholes

Introduction Installation of instrument packages in deep (several hundred to several thousand meters) boreholes near volcanoes is relatively expensive (a few million to tens of millions of U.S. dollars), but can provide a low-noise, high-quality source of geophysical (seismic, strain, tilt, and pore pressure), physical (temperature and water level), and geochemical data. Observations from instruments at depth have the potential to provide insights into processes associated with magma intrusion, unrest, and eruption that would not otherwise be possible (Lowenstern and others, 2017; Eichelberger, 2020). Examples of instrumented boreholes in volcanic areas include the 3-kilometer (km)-deep Long Valley Exploratory Well (LVEW) in California (for example, Priest and others, 1998; Prejean and Ellsworth, 2001; Fischer and others, 2003; Roeloffs and others, 2003; Sorey and others, 2003), the 1,262 meter-deep NSF Well (commonly referred to as the “Keller Well”) within the summit caldera of Kīlauea, Hawaiʻi (Keller and others, 1979; Myren and others, 2006), and the Caribbean Andesite Lava Island-volcano Precision Seismo-geodetic Observatory (CALIPSO) project at Soufrière Hills, Montserrat, which includes a series of four 200-meter (m)-deep holes (for example, Mattioli and others, 2004; Voight and others, 2006). The Plate Boundary Observatory (PBO) of the National Science Foundation’s Earthscope project placed seismometers, tiltmeters, strainmeters, and pore-pressure sensors at depths of 100 to 250 m in more than 100 boreholes scattered in western North America, including at Mount St. Helens, Washington, and Yellowstone Caldera, Wyoming. The total cost for an instrumented PBO borehole ranged from $250,000 to $270,000 U.S. dollars (USD) and a few thousand USD are required annually for maintenance (David Mencin, UNAVCO, written commun., October 2020).

Scientific Investigations Report↗
USGS2024

A case for improved global coordination of volcano observatories

The distribution of volcano monitoring networks and volcano expertise does not correlate well with the global distribution of volcanic risk. All countries have cultural, financial, bureaucratic, political, and logistical barriers to effective risk reduction. The lack of parity amongst volcano observatories jeopardizes public safety and curtails scientific research and understanding. Having global data compiled daily to retain a full record of volcanic unrest would lead to large and meaningful improvements in future eruption forecasts. To make progress on these issues, the volcanological community needs greater collaboration, standardization, and support..

Annals of Geophysics↗
USGS2023

The dynamic influence of subsurface geological processes on the assembly and diversification of thermophilic microbial communities in continental hydrothermal systems

An accepted paradigm of hydrothermal systems is the process of phase separation, or boiling, of a deep, homogeneous hydrothermal fluid as it ascends through the subsurface resulting in gas rich and gas poor fluids. While phase separation helps to explain first-order patterns in the chemistry and biology of a hot spring’s surficial expression, we know little about the subsurface architecture beneath “phase-separated” pools and the timescales over which phase separation processes occur. Essentially, we have a two-dimensional understanding of a four-dimensional process. By combining geophysical, geochemical, isotopic, and microbiological measurements of two adjacent phase-separated hot springs in Norris Geyser Basin, Yellowstone National Park, we provide a four-dimensional assessment of phase separation processes and their biological manifestation. We uniquely show that Yellowstone’s hydrothermal waters originate from a deep sedimentary aquifer and that both meteoric recharge and shallow reactive transport processes are required to establish the geobiological feedbacks that drive bimodal distributions in the geochemical and microbial composition of hot springs. Specifically, over periods of tens of years, gas-enriched fluids containing volcanic sulfide mix with meteoric waters resulting in microbially-mediated production of sulfuric acid by thermoacidophilic Archaea in the near subsurface. In contrast, over periods of hundreds of years, anoxic residual liquid rises to the surface where it is infused with atmospheric gas fostering Archaea and Bacteria that are largely dependent on oxygen. As such, our results provide formative insight into the causative links between subsurface geological processes, the development of geochemical fluids, and the assembly and diversification of thermophilic microbial communities in hydrothermal systems.

Wyoming↗
USGS2022

Guidelines for volcano-observatory operations during crises: Recommendations from the 2019 Volcano Observatory Best Practices meeting

In November 2019, the fourth meeting on Volcano Observatory Best Practices workshop was held in Mexico City as a series of talks, discussions, and panels. Volcanologists from around the world offered suggestions for ways to optimize volcano-observatory crisis operations. By crisis, we mean unrest that may or may not lead to eruption, the eruption itself, or its aftermath, all of which require analysis and communications by the observatory. During a crisis, the priority of the observatory should be to acquire, process, analyze, and interpret data in a timely manner. A primary goal is to communicate effectively with the authorities in charge of civil protection. Crisis operations should rely upon exhaustive planning in the years prior to any actual unrest or eruptions. Ideally, nearly everything that observatories do during a crisis should be envisioned, prepared, and practiced prior to the actual event. Pre-existing agreements and exercises with academic and government collaborators will minimize confusion about roles and responsibilities. In the situation where planning is unfinished, observatories should prioritize close ties and communications with the land and civil-defense authorities near the most threatening volcanoes. To a large extent, volcanic crises become social crises, and any volcano observatory should have a communication strategy, a lead communicator, regular status updates, and a network of colleagues outside the observatory who can provide similar messaging to a public that desires consistent and authoritative information. Checklists permit tired observatory staff to fulfill their duties without forgetting key communications, data streams, or protocols that need regular fulfilment (Bretton et al. 2018; Newhall et al. 2020). Observatory leaders need to manage staff workload to prevent exhaustion and ensure that expertise is available as needed. Event trees and regular group discussions encourage multi-disciplinary thinking, consideration of disparate viewpoints, and documentation of all group decisions and consensus. Though regulations, roles and responsibilities differ around the world, scientists can justify their actions in the wake of an eruption if they document their work, are thoughtful and conscientious in their deliberations, and carry out protocols and procedures developed prior to volcanic unrest. This paper also contains six case studies of volcanic eruptions or observatory actions that illustrate some of the topics discussed herein. Specifically, we discuss Ambae (Vanuatu) in 2017–2018, Kīlauea (USA) in 2018, Etna (Italy) in 2018, Bárðarbunga (Iceland) in 2014, Cotopaxi (Ecuador) in 2015, and global data sharing to prepare for eruptions at Nyiragongo (Democratic Republic of Congo).

Hawaii↗
USGS2022

Hydrogen isotope behavior during rhyolite glass hydration under hydrothermal conditions

The diffusion of molecular water (H 2 O m ) from the environment into volcanic glass can hydrate the glass up to several wt% at low temperature over long timescales. During this process, the water imprints its hydrogen isotope composition (δD H2O ) to the glass (δD gl ) offset by a glass-H 2 O fractionation factor (ΔD gl-H2O = δD gl – δD H2O ) which is approximately −33‰ at Earth surface temperatures. Glasses hydrate much more rapidly at higher, sub-magmatic temperatures as they interact with H 2 O during eruption, transport, and emplacement. To aid in the interpretation of δD gl in natural samples, we present hydrogen isotope results from vapor hydration experiments conducted at 175–375 °C for durations of hours to months using natural volcanic glasses. The results can be divided into two thermal regimes: above 250 °C and below 250 °C. Lower temperature experiments yield raw ΔD gl-H2O values in the range of −33 ± 11‰. Experiments at 225 °C using both positive and negative initial ΔD gl-H2O values converge on this range of values, suggesting this range represents the approximate equilibrium fractionation for H isotopes between glass and H 2 O vapor (10 3 lnα gl-H2O ) below 250 °C. Variation in ΔD gl-H2O (−33 ± 11‰) between different experiments and glasses may arise from incomplete hydration, analytical uncertainty, differences in glass chemistry, and/or subordinate kinetic isotope effects. Experiments above 250 °C yield unexpectedly low δD gl values with ΔD gl-H2O values of ≤–85‰. While alteration alone is incapable of explaining the data, these run products have more extensive surface alteration and are not interpreted to reflect equilibrium fractionation between glass and H 2 O vapor. Fourier transform infrared spectroscopy (FTIR) shows that glass can hydrate with as much as 5.9 wt% H 2 O m and 1.0 wt% hydroxl (OH − ) in the highest P-T experiment at 375 °C and 21.1 MPa. Therefore, we employ a 1D isotope diffusion–reaction model of glass hydration to evaluate the roles of equilibrium fractionation, isotope diffusion, water speciation reactions internal to the glass, and changing boundary conditions (e.g. alteration and dissolution). At lower temperatures, the best fitting model results to experimental data for low silica rhyolite (LSR) glasses require only an equilibrium fractionation factor and yield 10 3 lnα gl-H2O values of −33‰ ± 5‰ and −25‰ ± 5‰ at 175 °C and 225 °C, respectively. At higher temperatures, ΔD gl-H2O is dominated by boundary layer effects during glass hydration and glass surface alteration. The modeled bulk δD gl value is highly responsive to changes in the δD gl boundary condition regardless of the magnitude of other kinetic effects. Observed glass dissolution and surficial secondary mineral formation are likely to impose a disequilibrium boundary layer that drives extreme δD gl fractionation with progressive glass hydration. These results indicate that the observed ΔD gl-H2O of ∼−33 ± 11‰ can be cautiously applied as an equilibrium 10 3 lnα gl-H2O value to natural silicic glasses hydrated below 250 °C to identify hydration sources. This approximate ΔD gl-H2O may be applicable to even higher temperature glasses hydrated on short timescales (of seconds to minutes) in phreatomagmatic or submarine eruptions before H 2 O in the glass is primarily affected by boundary layer effects associated with alteration on the glass surface.

Geochimica et Cosmochimica Acta↗
USGS2021

Strengthening local volcano observatories through global collaborations

We consider the future of volcano observatories in a world where new satellite technologies and global data initiatives have greatly expanded over the last two decades. Observatories remain the critical tie between the decision-making authorities and monitoring data. In the coming decade, the global scientific community needs to continue to collaborate in a manner that will strengthen volcano observatories while building those databases and scientific models that allow us to improve forecasts of eruptions and mitigate their impacts. Observatories in turn need to contribute data to allow these international collaborations to prosper.

Bulletin of Volcanology↗
USGS2020

Indonesia and the United States team up to reduce impacts from dangerous volcanoes

With 75 historically active volcanoes, Indonesia is the world’s most volcanically active nation. Its volcanoes are legendary throughout the world, with the notorious 19th-century eruptions at Mount Tambora (1815) and Krakatau (1883), and the eruption that created the giant Toba Caldera in Sumatra (75,000 years ago)—the Earth’s largest volcanic eruption in the past 100,000 years. Just in the past 20 years, more than 36 volcanoes have erupted, some multiple times, threatening millions of people. The Government of Indonesia responds to this daunting volcanic threat from Indonesia’s Center for Volcanology and Geologic Hazards Mitigation (CVGHM) offices in Bandung. From there, dozens of staff members coordinate operations at 77 small observatories spread out across the 5,000-kilometer-long archipelago that is Indonesia. For more than 50 years, the United States has worked in partnership with the Government of Indonesia to reduce the risk of volcanic eruptions and to save lives. Today, the two governments cooperate through an agreement between CVGHM and the U.S. Geological Survey’s Volcano Disaster Assistance Program (VDAP). Each year CVGHM and VDAP representatives convene to discuss priorities for the upcoming 12 months. They outline a series of training efforts, field campaigns, equipment deployments, and timely topics that require further exploration and development.

Fact Sheet↗
USGS2020

Evidence of cosmic impact at Abu Hureyra, Syria at the Younger Dryas Onset (~12.8 ka): High-temperature melting at >2200 °C

At Abu Hureyra (AH), Syria, the 12,800-year-old Younger Dryas boundary layer (YDB) contains peak abundances in meltglass, nanodiamonds, microspherules, and charcoal. AH meltglass comprises 1.6 wt.% of bulk sediment, and crossed polarizers indicate that the meltglass is isotropic. High YDB concentrations of iridium, platinum, nickel, and cobalt suggest mixing of melted local sediment with small quantities of meteoritic material. Approximately 40% of AH glass display carbon-infused, siliceous plant imprints that laboratory experiments show formed at a minimum of 1200°–1300 °C; however, reflectance-inferred temperatures for the encapsulated carbon were lower by up to 1000 °C. Alternately, melted grains of quartz, chromferide, and magnetite in AH glass suggest exposure to minimum temperatures of 1720 °C ranging to >2200 °C. This argues against formation of AH meltglass in thatched hut fires at 1100°–1200 °C, and low values of remanent magnetism indicate the meltglass was not created by lightning. Low meltglass water content (0.02–0.05% H 2 O) is consistent with a formation process similar to that of tektites and inconsistent with volcanism and anthropogenesis. The wide range of evidence supports the hypothesis that a cosmic event occurred at Abu Hureyra ~12,800 years ago, coeval with impacts that deposited high-temperature meltglass, melted microspherules, and/or platinum at other YDB sites on four continents.

Abu Hureyra↗
USGS2020

Magma intrusion and volatile ascent beneath Norris Geyser Basin, Yellowstone National Park

Recent activity has provided new insights into the causes of surface deformation in and around the Yellowstone Caldera, a topic that has been debated since the discovery of caldera floor uplift more than four decades ago. An episode of unusually rapid uplift (>15 cm/yr) centered near Norris Geyser Basin along the north caldera rim began in late 2013 and continued until a M w 4.9 earthquake on 30 March 2014; thereafter, uplift abruptly switched to subsidence. Uplift at rates of several centimeters per year resumed in 2016 and continued at least through the end of 2018. Modeling of Global Positioning System and interferometric synthetic aperture radar data suggests an evolving process of deep magma intrusion during 1996–2001 followed by volatile ascent and accumulation at shallow levels, perhaps as shallow as a few hundred meters depth. The depth of shallow volatile accumulation appears to have shallowed from the 2014 to the 2016 deformation episode, and frequent eruptions of Steamboat Geyser since March 2018 are likely a surface manifestation of this ongoing process. Hydrothermal explosion features are prominent in the Norris Geyser Basin area, and the apparent shallow nature of the volatile accumulation implies an increased risk of hydrothermal explosions.

Wyoming↗
USGS2020

An experimental investigation of interaction between andesite and hyperacidic volcanic lake water

Alteration in magmatic-hydrothermal systems leads to distinct changes in rock texture and mineralogy, and a strong redistribution of elements between fluid and rock. Here, we experimentally interacted andesite scoria with hyperacidic, high-sulfidation style fluids from Kawah Ijen volcano (Indonesia) at 25 and 100˚C, seeking to reproduce the textures observed in natural samples from this volcano, and to understand the element fluxes that accompany alteration. The susceptibility to alteration in the experiments is Cu-Fe-sulphide > calcic plagioclase > pyroxene > titano-magnetite > sodic plagioclase, with complete preservation of glass. Silicate minerals alter to opaline silica, and gypsum, barite and a Zr-phase precipitate. The selective alteration of the phenocryst minerals results in a preferential release of compatible elements, as the glass is the main incompatible element host. The experiments reproduce the alteration textures of the natural samples, including the preservation of glass, but the predicted compatible over incompatible element enrichment in the alteration element flux is not observed in the natural setting. This suggests that alteration at Kawah Ijen is dominated by lithologies that lack abundant glass, in particular lava flows where the glass has devitrified, despite these lava flows having a lower surface area compared to scoria.

Kawah Ijen↗
USGS2020

Vapor-bubble growth in olivine-hosted melt inclusions

Melt inclusions record the depth of magmatic processes, magma degassing paths, and volatile budgets of magmas. Extracting this information is a major challenge. It requires determining melt volatile contents at the time of entrapment when working with melt inclusions that have suffered post-entrapment modifications. Several processes decrease internal melt inclusion pressure, resulting in nucleation and growth of a vapor bubble and, time permitting, diffusion of volatiles (especially CO2) into the vapor bubble. Methods exist that attempt to reconstruct the entrapped CO2 contents, but they are difficult to apply and yield inconsistent results. Here, we explore bubble growth, evaluate CO2 reconstruction approaches, and develop improved experimental and computational approaches. Piston-cylinder experiments were conducted on olivine-hosted melt inclusions from Seguam (Alaska, USA) and Fuego (Guatemala) volcanoes at the following conditions: 500-800 MPa, 1140-1200 °C for Seguam and 1110-1140 °C for Fuego, 4-8 wt% H2O in the KBr brine, and run durations of 10-120 minutes. Heated melt inclusions form well-defined S-CO2 trends that can be described by degassing models. CO2 contents are enriched by a factor of ~2.5, on average, relative to those of the glasses within unheated melt inclusions, whereas S contents of heated and unheated melt inclusion glasses overlap, indicating insignificant amounts of S partition into the vapor bubble. Low closure temperatures enable CO2 diffusion into vapor bubbles during quench upon eruption, while a higher closure temperature for S limits its loss to vapor bubbles. We evaluate the timescales of post-entrapment processes and use the results to develop a new computational model to restore entrapped CO2 contents: MIMiC (Melt Inclusion Modification Corrections). Heated melt inclusion data are used as a benchmark to evaluate of the results from MIMiC and other published methods of CO2 reconstruction. The methods perform variably well. Key advantages to our experimental rehomogenization technique are that it enables accurate measurements of CO2 contents and allows for large quantities of melt inclusions to be rehomogenized efficiently. Our new computational model produces more accurate results than other computational methods, has similar accuracy to the Raman method of CO2 reconstruction in cases where Raman can be applied (i.e., no C-bearing phases in bubble), and can be applied to the vast body of published melt inclusion data. To obtain the most robust data on bubble-bearing melt inclusions, we recommend taking both experimental- and MIMiC-based approaches.

American Mineralogist↗
USGS2019

The 2017-19 activity at Mount Agung in Bali (Indonesia): Intense unrest, monitoring, crisis response, evacuation, and eruption

After 53 years of quiescence, Mount Agung awoke in August 2017, with intense seismicity, measurable ground deformation, and thermal anomalies in the summit crater. Although the seismic unrest peaked in late September and early October, the volcano did not start erupting until 21 November. The most intense explosive eruptions with accompanying rapid lava effusion occurred between 25 and 29 November. Smaller infrequent explosions and extrusions continue through the present (June 2019). The delay between intense unrest and eruption caused considerable challenges to emergency responders, local and national governmental agencies, and the population of Bali near the volcano, including over 140,000 evacuees. This paper provides an overview of the volcanic activity at Mount Agung from the viewpoint of the volcano observatory and other scientists responding to the volcanic crisis. We discuss the volcanic activity as well as key data streams used to track it. We provide evidence that magma intruded into the mid-crust in early 2017, and again in August of that year, prior to intrusion of an inferred dike between Mount Agung and Batur Caldera that initiated an earthquake swarm in late September. We summarize efforts to forecast the behavior of the volcano, to quantify exclusion zones for evacuations, and to work with emergency responders and other government agencies to make decisions during a complex and tense volcanic crisis.

Scientific Reports↗
USGS2018

Contrasting perspectives on the Lava Creek Tuff eruption, Yellowstone, from new U–Pb and 40Ar/39Ar age determinations

The youngest major caldera-forming event at Yellowstone was the ~ 630-ka eruption of the Lava Creek Tuff. The tuff as mapped consists of two major ignimbrite packages (members A and B), linked to widespread coeval fall deposits and formation of the Yellowstone Caldera. Subsequent activity included emplacement of numerous rhyolite flows and domes, and development of two structurally resurgent domes (Mallard Lake and Sour Creek) that accommodate strain due to continual uplift/subsidence cycles. Uplifted lithologies previously mapped on and adjacent to Sour Creek dome were thought to include the ~ 2.08-Ma Huckleberry Ridge Tuff, cropping out beneath Lava Creek Tuff members A and B. Mapped outcrops of this Huckleberry Ridge Tuff material were sampled as welded ignimbrite (sample YR345) on Sour Creek dome, and at nearby Bog Creek as welded ignimbrite (YR311) underlain by an indurated lithic lag breccia containing blocks of another welded ignimbrite (YR324). Zircon near-rim U–Pb analyses from these samples yield weighted mean ages of 661 ± 13 ka (YR345: 95% confidence), 655 ± 11 ka (YR311), and 664 ± 15 ka (YR324) (combined weighted mean of 658.8 ± 6.6 ka). We also studied two samples of ignimbrite previously mapped as Huckleberry Ridge Tuff on the northeastern perimeter of the Yellowstone Caldera, ~ 12 km ENE of Sour Creek dome. Sanidines from these samples yield 40 Ar/ 39 Ar age estimates of 634.5 ± 6.8 ka (8YC-358) and 630.9 ± 4.1 ka (8YC-359). These age data show that all these units represent previously unrecognized parts of the Lava Creek Tuff and do not have any relationship to the Huckleberry Ridge Tuff. Our observations and data imply that the Lava Creek eruption was more complex than is currently assumed, incorporating two tuff units additional to those currently mapped, and which themselves are separated by a time break sufficient for cooling and some reworking. The presence of a lag breccia suggests that a source vent lay nearby (< ~ 3 km) for some of the tuffs and that the Yellowstone Caldera boundary in this area could be reconsidered.

Wyoming↗