Geology topics

J.S. Waldner

Publications and source records attributed to J.S. Waldner.

4 recordsLinked to original sources

USGS2000

Offshore-onshore correlation of upper Pleistocene strata, New Jersey Coastal Plain to continental shelf and slope

High-resolution seismic reflection profiles (~ 1-5 m resolution), including Geopulse(TM), Uniboom(TM), minisparker, small air gun, and water gun sources, are used to trace the ?? 18O stage 5 portion of the outcropping Cape May Formation across the shelf to the continental slope. The ?? 18O stage 5/6 boundary identified at Ocean Drilling Project (ODP) Site 903 on the continental slope anchors the onshore-offshore seismic correlations. Above the ?? 18O stage 5 sequence, there are distinguishable lowstand systems tracts (LST), transgressive systems tracts (TST) and highstand systems tracts (HST) that correlate with ?? 18O stages 4 through 1. Atlantic Margin Coring Project (AMCOR) holes 6009, 6010, 6011, 6020, and 6021C provide age and paleoenvironmental indicators that agree with these correlations. The sub-arctic paleoenvironmental indicators in sequences of ?? 18O stage 3 agree with the cooler temperatures and lower sea-level highstands of that time. Thicker ?? 18O stage 3 and 4 sequences are preserved in the Paleo-Hudson River incised valley across the shelf. The expanded ice sheets during stage ?? 18O 3 compared to ?? 18O stages 1 and 5 probably increased sediment discharge in the Hudson River drainage system. (C) 2000 Elsevier Science B.V. All rights reserved.

Conference Paper↗

USGS1999

Assessment of offshore New Jersey sources of Beach replenishment sand by diversified application of geologic and geophysical methods

Beach replenishment serves the dual purpose of maintaining a source of tourism and recreation while protecting life and property. For New Jersey, sources for beach sand supply are increasingly found offshore. To meet present and future needs, geologic and geophysical techniques can be used to improve the identification, volume estimation, and determination of suitability, thereby making the mining and managing of this resource more effective. Current research has improved both data collection and interpretation of seismic surveys and vibracore analysis for projects investigating sand ridges offshore of New Jersey. The New Jersey Geological Survey in cooperation with Rutgers University is evaluating the capabilities of digital seismic data (in addition to analog data) to analyze sand ridges. The printing density of analog systems limits the dynamic range to about 24 dB. Digital acquisition systems with dynamic ranges above 100 dB can permit enhanced seismic profiles by trace static correction, deconvolution, automatic gain scaling, horizontal stacking and digital filtering. Problems common to analog data, such as wave-motion effects of surface sources, water-bottom reverberation, and bubble-pulse-width can be addressed by processing. More than 160 line miles of digital high-resolution continuous profiling seismic data have been collected at sand ridges off Avalon, Beach Haven, and Barnegat Inlet. Digital multichannel data collection has recently been employed to map sand resources within the Port of New York/New Jersey expanded dredge-spoil site located 3 mi offshore of Sandy Hook, New Jersey. Multichannel data processing can reduce multiples, improve signal-to-noise calculations, enable source deconvolution, and generate sediment acoustic velocities and acoustic impedance analysis. Synthetic seismograms based on empirical relationships among grain size distribution, density, and velocity from vibracores are used to calculate proxy values for density and velocity. The seismograms are then correlated to the digital seismic profile to confirm reflected events. They are particularly useful where individual reflection events cannot be detected but a waveform generated by several thin lithologic units can be recognized. Progress in application of geologic and geophysical methods provides advantages in detailed sediment analysis and volumetric estimation of offshore sand ridges. New techniques for current and ongoing beach replenishment projects not only expand our knowledge of the geologic processes involved in sand ridge origin and development, but also improve our assessment of these valuable resources. These reconnaissance studies provide extensive data to the engineer regarding the suitability and quantity of sand and can optimize placement and analysis of vibracore samples.Beach replenishment serves the dual purpose of maintaining a source of tourism and recreation while protecting life and property. Research has improved both data collection and interpretation of seismic surveys and vibracore analysis for projects investigating sand ridges offshore of New Jersey. The New Jersey Geological Survey in cooperation with Rutgers University is evaluating the capabilities of digital seismic data to analyze sand ridges. The printing density of analog systems limits the dynamic range to about 24 dB. Digital acquisition systems with dynamic ranges about 100 dB can permit enhanced seismic profiles by trace static correction, deconvolution, automatic gain scaling, horizontal stacking and digital filtering.

Marine Georesources and Geotechnology↗

USGS1996

Synthetic seismograms from vibracores: A case study in correlating the late quaternary seismic stratigraphy of the New Jersey inner continental shelf

A new technique, using empirical relationships between median grain size and density and velocity to calculate proxy values for density and velocity, avoids many of the problems associated with the use of well logs and shipboard measurements to construct synthetic seismograms. This method was used to groundtruth and correlate across both analog and digital shallow high-resolution seismic data on the New Jersey shelf. Sampling dry vibracores to determine median grain size eliminates the detrimental effects that coring disturbances and preservation variables have on the sediment and water content of the core. The link between seismic response to lithology and bed spacing is more exact. The exact frequency of the field seismic data can be realistically simulated by a 10-20 cm sampling interval of the vibracores. The estimate of the percentage error inherent in this technique, 12% for acoustic impedance and 24% for reflection amplitude, is calculated to one standard deviation and is within a reasonable limit for such a procedure. The synthetic seismograms of two cores, 4-6 m long, were used to correlate specific sedimentary deposits to specific seismic reflection responses. Because this technique is applicable to unconsolidated sediments, it is ideal for upper Pleistocene and Holocene strata.

Journal of Sedimentary Research↗

USGS1986

Field comparison of shallow seismic sources

Choosing a seismic source for a shallow reflection survey can be the most pivotal decision for the engineering geophysicist. The intent of this paper is to present data that will assist in selection of a shallow seismic source best meeting the goals within the constraints of specific projects, particularly in areas where the water table is near the surface. The data were collected (and displayed as seismograms and amplitude spectra) for 15 different shallow seismic sources in October, 1985, at a single site in New Jersey; they show the different characteristics of each source. Considering the almost three orders of magnitude difference in total source energy between the largest and smallest source, we chose a display format that presented the data as objectively as possible, while still allowing direct source‐to‐source comparisons. Two strong reflections at about 100 and 130 ms probably mark the top and bottom of a clay unit 80 m below the surface at this site. Our previous work and that of our colleagues suggests that, given a specific set of site characteristics, any source could dominate the comparison categories addressed here.

New Jersey↗