Search USGSSearch

Geology topics

J.M. Christie

Publications and source records attributed to J.M. Christie.

4 recordsLinked to original sources

Effects of compression direction on the plasticity and rheology of hydrolytically weakened synthetic quartz crystals at atmospheric pressure

A hydrothermally grown synthetic quartz crystal with 370±60 ppm hydroxyl impurity was cut into right rectangular prisms in eight crystallographic orientations. We compressed the prisms under constant axial force corresponding to a uniaxial stress of 140.0±0.5 MPa, and temperatures of 510° and 750°C. All but one of the samples sustained permanent axial strains of 2–3%. We established the operating slip systems from specimen shape change, slip bands and dislocation etch pits on polished surfaces, crystallographic orientation changes, stress optical features in thin sections, and transmission electron microscopy. The observed creep behavior and plasticity divided the samples into three groups: (1) Crystals compressed at 45° to [0001] and [ ] and those compressed ⊥( ) and ⊥( ) deformed principally by slip parallel to [0001]. Creep rates were relatively high and were not strongly sensitive to test temperature. Dislocation arrays approximately parallel to ( ) are common. Dislocation loops are elongate parallel to [0001], indicating that the edge segments were more mobile than the screw segments. (2) The second group of samples were loaded normal to [0001] in three orientations: ⊥( ), ⊥( ), and at 45° to ( ). These samples deformed primarily by { } 〈a〉 slip with some evidence for secondary slip on the other systems. They were more creep resistant than the first group and displayed a much higher sensitivity of creep rate to test temperature. Dislocation loops are very elongate parallel to [0001], indicating that the screw dislocation segments were much more mobile than the edge segments. (3) A sample compressed parallel to [0001] at 750°C crept at a barely detectable rate (∼10 s) and no optical scale slip features were observed. These results confirm our earlier work on one orientation each from groups 1 and 2, which indicated a strong creep anisotropy for this same crystal. This creep anisotropy parallels a remarkably similar anisotropy in the diffusivity of impurities in quartz, suggesting a causal relationship between impurity diffusion and creep associated with hydrolytic weakening. Appendix Tables A1‐A5 are available with entire article on microfiche. Order from American Geophysical Union, 2000 Florida Avenue, N.W., Washington, DC 20009. Document B84‐004; $2.50. Payment must accompany order.

Journal of Geophysical Research B: Solid Earth

Mechanical twinning in diopside Ca(Mg,Fe)Si2O6: Structural mechanism and associated crystal defects

iopside twins mechanically on two planes, (100) and (001), and the associated macroscopic twinning strains are identical (Raleigh and Talbot, 1967). An analysis based on crystal structural arguments predicts that both twin mechanisms involve shearing of the (100) octahedral layers (containing Ca 2+ , Mg 2+ and Fe 2+ ions) by a magnitude of c /2. Small adjustments or shuffles occur in the adjacent layers containing the [SiO 4 ] 4− tetrahedral chains. While the (100) twins are conventional with shear parallel to the composition plane, this analysis predicts that (001) twins form by a mechanism closely related to kinking. A polycrystalline diopside specimen was compressed 8% at a temperature of 400° C, a pressure of 16 kilobars, and a compressive strain rate of about 10 −4 /s. Transmission electron microscopy on this specimen has revealed four basic lamellar features: 1) (100) mechanical twin lamellae; 2) (100) glide bands containing unit dislocations; 3) (001) twin lamellae; 4) (101) lamellar features, not as yet identified. The (001) twins often contain remnant (100) lamellae of untwinned host. Twinning dislocations occur in these (100) lamellae and in the (001) twin boundaries with very high densities. Diffraction contrast experiments indicate that the twinning dislocations associated with both twin laws glide on (100) with Burgers vector b = X [001] where X is probably equal to 1/2 on the basis of the structural analysis. Parallels are drawn between mechanical twinning in clinopyroxenes and clinoamphiboles. The exclusive natural occurrence of basal twins in shock-loaded clinopyroxenes and of analogous ( 1 ¯ "> 1 ¯ 1¯ 01) twins in clinoamphiboles is given a simple explanation in terms of the relative difficulty of the “kinking” mechanism as compared to direct glide parallel to the composition plane.

Physics and Chemistry of Minerals

The thermal and deformational history of apollo 15418, A partly shock-melted lunar breccia

A thermal and mechanical history of lunar gabbroic anorthosite 15418 (1140g) has been deduced from petrographic examination of both exterior and interior thin sections and electron microprobe analysis and transmission electron microscopy of interior thin sections. We suggest that the rock underwent two major shock events - an early brecciation and annealing that produced a recrystallized breccia, followed by a second shock event that melted the surface of the rock, vitrified the interior plagioclase and heavily deformed the mafic phases. This latter shock even was also followed by annealing which crystallized the shock-produced glass and promoted recovery and recrystallization of the deformed crystalline phases. The complex mechanical and thermal history of 15418 compared with other ANT suite rocks at Spur Crater suggests that it had a different provenance. ?? 1977 D. Reidel Publishing Company, Dordrecht-Holland.

The Moon

Shock-produced olivine glass: First observation

Transmission electron microscope (TEM) observations of an experimentally shock-deformed single crystal of natural peridot, (Mg 0.88 Fe 0.12 ) 2 SiO 4 , recovered from peak pressures of about 56 × 10 9 pascals revealed the presence of amorphous zones located within crystalline regions with a high density of tangled dislocations. This is the first reported observation of olivine glass. The shocked sample exhibits a wide variation in the degree of shock deformation on a small scale, and the glass appears to be intimately associated with the highest density of dislocations. This study suggests that olivine glass may be formed as a result of shock at pressures above about 50 to 55 × 10 9 pascals and that further TEM observations of naturally shocked olivines may demonstrate the presence of glass.

Science