Search USGS⌕ Search

Geology topics

J.G. Viets

Publications and source records attributed to J.G. Viets.

At least 19 recordsLinked to original sources
USGS1996

Paragenetic and minor- and trace-element studies of Mississippi Valley-type ore deposits of the Silesian-Cracow district, Poland

Paragenetic and minor- and trace-element studies were conducted on samples of epigenetic ore and gangue minerals collected from mines and drill core in the Silesian-Cracow (S-C) district of southern Poland. Four discrete mineral suites representing four mineralizing stages can be identified throughout the district. The earliest epigenetic minerals deposited during stage 1 consist of a late dolomite cement together with minor pyrite and marcasite. Stage 2 was the first ore-forming stage and included repetitive deposition of sphalerite and galena in a variety of morphologies. Stage 3 abruptly followed the first ore stage and deposited marcasite and pyrite with variable amounts of late sphalerite and galena. In the samples studied, minerals deposited during stage 3 are predominately marcasite-pyrite with minor sphalerite and galena in the Pomorzany and Olkusz mines, whereas, at the Trzebionka mine, stage 3 mineralization deposited mostly galena and sphalerite with little marcasite or pyrite. Stage 4 minerals include contains barite, followed by calcite, with very minor pyrite and a rare, late granular sphalerite. Compared to other major Mississippi Valley-type (MVT) districts of the world, the Silesian-Cracow district contains sphalerite with the second largest range in Ag concentrations and the largest range in Fe and Cd concentrations of any district. Unlike in other districts, very wide ranges in minor- and trace-element concentrations are also observed in paragenetically equivalent samples collected throughout the district. This wide range indicates that the minor- and trace-element content of the ore-forming environment was highly variable, both spatially and temporally, and suggests that the hydrologic system that the ore fluids traversed from their basinal source was very complex. Throughout the district, a significant increase in Tl, Ge, and As concentrations is accompanied by a lightening of sulfur isotopes between stage 2 and stage 3 minerals. This change appears to record a major district-scale hydrologic event that probably reflects the introduction of fluids with significantly different geochemistry than that of earlier ore-forming fluids.

Prace - Panstwowego Instytutu Geologicznego↗
USGS1996

The composition of fluid inclusions in ore and gangue minerals from the Silesian-Cracow Mississippi Valley-type Zn-Pb deposits Poland: Genetic and environmental implications

The composition of fluids extracted from ore and gangue sulfide minerals that span most of the paragenesis of the Silesian-Cracow district was determined using a newly developed ion chromatographic (IC) technique. Ionic species determined were Na+, NH+4, Ca2+, Mg2+, K+, Rb+, Sr2+, Ba2+, Cl-, Br-, F-, I-, PO3-4, CO2-3, HS-, S2O2-3, SO2-4, NO-3, and acetate. Mineral samples included six from the Pomorzany mine and one from the Trzebionka mine which are hosted in the Triassic Muschelkalk Formation, and two samples of drill core from mineralized Upper Devonian strata. Nine paragenetically identifiable sulfide minerals occur throughout the Silesian-Cracow district. These include from earliest to latest: early iron sulfides, granular sphalerite, early galena, light-banded sphalerite, galena, dark-banded sphalerite, iron sulfides, late dark-banded sphalerite with late galena, and late iron sulfides. Seven of the minerals were sampled for fluid inclusion analysis in this study. Only the early iron sulfides and the last galena stage were not sampled. Although the number of analyses are limited to nine samples and two replicates and there is uncertainty about the characteristics of the fluid inclusions analyzed, the data show clear temporal trends in the composition of the fluids that deposited these minerals. Fluid inclusions in minerals deposited later in the paragenesis have significantly more K+, Br-, NH+4, and acetate but less Sr2+ than those deposited earlier in the paragenesis. The later minerals are also characterized by isotopically lighter sulfur and significantly more Tl and As in the solid minerals. The change in ore-fluid chemistry is interpreted to reflect a major change in the hydrologic regime of the district. Apparently, the migrational paths of ore fluids from the Upper Silesian basin changed during ore deposition and the fluids which deposited early minerals reacted with aquifers with very different geochemical characteristics than those that deposited late minerals. The early fluids may have reacted primarily with Devonian and Lower Carboniferous carbonate aquifers deeper in the basin, whereas the later fluids appear to have had extensive contact with organic-rich rocks, probably the shallower Middle and Upper Carboniferous flysch associated with coal measures. High concentrations of toxic Tl and As occur in the readily oxidized marcasite and pyrite minerals deposited by the later fluids. In general, the geochemistry of both the early and late fluids may be explained by an evaporite related origin or by water-rock modification of a saline basinal brine. When compared to the composition of fluid inclusions in Mississippi Valley-type (MVT) ore minerals from the Ozark region of the United States, fluid inclusions in minerals from Silesian-Cracow are fundamentally different, containing more Ca2+, Mg2+, NH+4, Br-, Sr2+ and acetate in all mineral stages with significantly more K+ in later stage minerals. The differences in ore fluid chemistry between the two regions are consistent with the lithologic differences of the respective basins thought to be the source of the mineralizing brines.

Prace - Panstwowego Instytutu Geologicznego↗
USGS1994

Chemical reaction path modeling of ore deposition in Mississippi Valley-type Pb-Zn deposits of the Ozark region, US midcontinent

The Ozark region of the U.S. midcontinent is host to a number of Mississippi Valley-type districts, including the world-class Viburnum Trend, Old Lead Belt, and Tri-State districts and the smaller Southeast Missouri barite, Northern Arkansas, and Central Missouri districts. There is increasing evidence that the Ozark Mississippi Valley-type districts formed locally within a large, interconnected hydrothermal system that also produced broad fringing areas of trace mineralization, extensive subtle hydrothermal alteration, broad thermal anomalies, and regional deposition of hydrothermal dolomite cement. The fluid drive was provided by gravity flow accompanying uplift of foreland thrust belts during the Late Pennsylvanian to Early Permian Ouaehita orogeny.In this study, we use chemical speciation and reaction path calculations, based on quantitative chemical analyses of fluid inclusions, to constrain likely hydrothermal brine compositions and to determine which precipitation mechanisms are consistent with the hydrothermal mineral assemblages observed regionally and locally within each Mississippi Valley-type district in the Ozark region. Deposition of the regional hydrothermal dolomite cement with trace sulfides likely occurred in response to near-isothermal effervescence of CO 2 from basinal brines as they migrated to shallower crustal levels and lower confining pressures. In contrast, our calculations indicate that no one depositional process can reproduce the mineral assemblages and proportions of minerals observed in each Ozark ore district; rather, individual districts require specific depositional mechanisms that reflect the local host-rock composition, structural setting, and hydrology.Both the Northern Arkansas and Tri-State districts are localized by normal faults that likely allowed brines to rise from deeper Cambrian-Ordovician dolostone aquifers into shallower carbonate sequences dominated by limestones. In the Northern Arkansas district, jasperoid preferentially replaced limestones in the mixed dolostone-limestone sedimentary packages. Modeling results indicate that the ore and alteration assemblages in the Tri-State and Northern Arkansas districts resulted from the flow of initially dolomite-saturated brines into cooler limestones. Adjacent to fluid conduits where water/rock ratios were the highest, the limestone was replaced by dolomite. As the fluids moved outward into cooler limestone, jasperoid and sulfide replaced limestone. Isothermal boiling of the ore fluids may have produced open-space filling of hydrothermal dolomite with minor sulfides in breccia and fault zones. Local mixing of the regional brine with locally derived sulfur undoubtedly played a role in the development of sulfide-rich ore runs.Sulfide ores of the Central Missouri district are largely open-space filling of sphalerite plus minor galena in dolostone karst features localized along a broad anticline. Hydrothermal solution collapse during ore deposition was a minor process, indicating dolomite was slightly undersaturated during ore deposition. No silicification and only minor hydrothermal dolomite is present in the ore deposits. The reaction path that best explains the features of the Central Missouri sulfide deposits is the near-isothermal mixing of two dolomite-saturated fluids with different H 2 S and metal contents. Paleokarst features may have allowed the regional brine to rise stratigraphically and mix with locally derived, H 2 S-rich fluids. The Viburnum Trend and Old Lead Belt ores are galena rich with lesser amounts of sphalerite; they replace the most permeable dolostone facies in the Bonneterre Dolomite. Hydrothermal dissolution of host dolostone was concurrent with sulfide deposition, but dolomite deposition occurred episodically between periods of sulfide deposition. The important ore controls in these districts are a variety of sedimentary and geologic features that allowed cross-stratigraphic fluid flow and provided opportunities for fluid mixing. The reaction path which best reproduces the broad features of the Viburnum Trend and Old Lead Belt ores is one in which a dolomite-saturated, lead-rich, zinc- and H 2 S-poor brine mixes with a less saline, H 2 S-rich fluid. The brine became enriched in K, Mg, and Pb and depleted in H 2 S as it flowed through sandstone and redbed aquifers prior to entering the district. This mixing model is consistent with the abundant fluid inclusion and stable isotope evidence for fluid mixing in the districts. Small amounts of cooling associated with the mixing may have contributed to sulfide deposition.

Alabama, Arkansas, Illinois, Indiana, Kansas, Kent↗
USGS1992

The role of atomic absorption spectrometry in geochemical exploration

In this paper we briefly describe the principles of atomic absorption spectrometry (AAS) and the basic hardware components necessary to make measurements of analyte concentrations. Then we discuss a variety of methods that have been developed for the introduction of analyte atoms into the light path of the spectrophotometer. This section deals with sample digestion, elimination of interferences, and optimum production of ground-state atoms, all critical considerations when choosing an AAS method. Other critical considerations are cost, speed, simplicity, precision, and applicability of the method to the wide range of materials sampled in geochemical exploration. We cannot attempt to review all of the AAS methods developed for geological materials but instead will restrict our discussion to some of those appropriate for geochemical exploration. Our background and familiarity are reflected in the methods we discuss, and we have no doubt overlooked many good methods. Our discussion should therefore be considered a starting point in finding the right method for the problem, rather than the end of the search. Finally, we discuss the future of AAS relative to other instrumental techniques and the promising new directions for AAS in geochemical exploration.

Journal of Geochemical Exploration↗
USGS1991

Strontium isotopic constraints on the origin of ore-forming fluids of the Viburnum Trend, southeast Missouri

We have measured 87 Sr 86 Sr "> 87Sr86Sr and Rb and Sr concentrations in several minerals, primarily sulfides, spanning the paragenesis of hydrothermal mineralization in the Viburnum Trend in southeast Missouri. Separate measurements were made for fluid inclusions opened by crushing or thermal decrepitation and for the solids. For comparison, measurements were also made on samples of probable local aquifers, the Bonneterre Formation and the Lamotte Sandstone. For some of the samples, concentrations of K, Ca, Cl, Na, and Mg are also reported. In several cases 87 Sr 86 Sr ratios "> 87Sr86Srratios are different (higher) in the solids than in the fluid inclusions. We have investigated the possibility that either type of sample gives spurious results, e.g., that the fluid inclusions are secondary or contaminated by host dolomite, or that Sr in the solids reflects a detrital rather than an authigenic source. Consideration of mass balance, overall solute chemistry, and examination of non-sulfide dissolution residue, however, suggests that both types of sample reflect primary fluid Sr composition. We thus adopt the working hypothesis that Sr isotopic composition in fluids at the time of hydrothermal mineralization was highly variable. The observed results for the Viburnum Trend do not conform well to expected trends for Mississippi Valley-type (MVT) mineralization based primarily on analyses of gangue carbonates, barite, and fluorite. Fluid inclusion Sr in some of the Viburnum Trend samples is more radiogenic than in the host dolomite but only moderately so; in other samples, notably main-stage octahedral galena, fluid inclusion Sr composition is within the range observed for the host dolomite. In contrast, Sr in some of the sulfides is very radiogenic, much more so than previously reported for MVT minerals, and is very radiogenic early in the paragenesis (pyrite, chalcopyrite, sphalerite), less radiogenic during main-stage ore deposition, and again more radiogenic in later paragenetic stages.

Geochimica et Cosmochimica Acta↗
USGS1991

Origin of late dolomite cement by CO2-saturated deep basin brines: evidence from the Ozark region, central United States

Studies of fluid inclusions in regionally extensive late dolomite cement (LDC) throughout the Ozark region show that CO 2 effervescence was widespread during dolomite precipitation. On the basis of quantitative analyses of inclusion fluids, reaction-path modeling shows that LDC with trace amounts of sulfides can be deposited by effervescence of a CO 2 -saturated basin brine as it migrates to shallower levels and lower confining pressures. This precipitation mechanism best explains occurrences of LDC in the Ozark region and may account for LDC found in sedimentary basins worldwide.

Geology↗
USGS1990

Genetic implications of regional and temporal trends in ore fluid geochemistry of Mississippi Valley-type deposits in the Ozark region

Fluids extracted from aqueous fluid inclusions in epigenetic gangue and ore minerals record the migration of huge volumes of highly saline fluids throughout the stratigraphic section of the Ozark region. The extracted fluids share many similarities regionally, but there are significant temporal differences which define two geochemically distinct end-member ore-forming fluids that we refer to as the Viburnum Trend main stage or Viburnum Trend type and the Tri-State type.Viburnum Trend-type fluids are enriched in potassium and are associated only with deposits close to the basal Lamotte Sandstone. The main-stage octahedral galena ore of the Viburnum Trend and much of the Old Lead Belt ore is thought to be derived from this type of ore fluid. Galena deposited by Viburnum Trend-type fluids contains less radiogenic lead than galena deposited by Tri-State-type fluids. Sulfides deposited by Viburnum Trend-type fluids also contain isotopically heavier sulfur and significant amounts of copper, cobalt, nickel, and silver.Tri-State-type fluids have a low potassium content when compared with Viburnum Trend-type fluids and are characteristic of deposits where ore-forming fluids migrated through large volumes of carbonate rock. These fluids are thought to have formed the ore deposits of the Tri-State, Northern Arkansas, and Central Missouri districts, the cubic galena-stage ore of the Viburnum Trend, and the many trace occurrences of sphalerite throughout the Ozark region. Galena deposited by Tri-State-type fluids has more radiogenic lead and the sulfides have isotopically lighter sulfur than sulfides deposited by Viburnum Trend-type fluids. A systematic south to north increase of potassium in the Tri-State-type fluids suggests that they migrated from a southerly source such as the Arkoma basin.Possible explanations for the origins of these two end-member fluids include: (1) a single parent brine evolved into two distinct fluids due to reactions with geochemically distinct aquifers during migration, (2) the two distinct fluids reflect normal fluid evolution within a single source basin of a bittern and of later halite dissolution, and (3) the Viburnum Trend and Tri-State-type brines migrated to southeast Missouri from two different source basins. Our data does not preclude any of these possibilities; however, the geochemical similarity of the Viburnum Trend end-member fluid to a bittern may be accounted for by water-rock modifications of the brine during migration. Other evidence strongly supports a southerly source for the ore-forming brines thus limiting possible sources for the Viburnum Trend-type fluid to the Arkoma and/or Black Warrior basins of the Ouachita foreland trough. Viburnum Trend-type fluid flow was probably funneled northward through basal sandstones within the Reelfoot rift and water-rock modifications occurring there may have resulted in its unique geochemistry.

Economic Geology↗
USGS1984

Determination of arsenic, antimony, bismuth, cadmium, copper, lead, molybdenum, silver and zinc in geological materials by atomic-absorption spectrometry

Arsenic, antimony, bismuth, cadmium, copper, lead, molybdenum, silver and zinc are very useful elements in geochemical exploration. In the proposed method, geological samples are fused with potassium pyrosulphate and the fusate is dissolved in a solution of hydrochloric acid, ascorbic acid and potassium iodide. When this solution is shaken with a 10% V/V Aliquat 336 - isobutyl methyl ketone organic phase, the nine elements of interest are selectively partitioned in the organic phase. All nine elements can then be determined in the organic phase using flame atomic-absorption spectrometry. The method is rapid and allows the determination of Ag and Cd at levels down to 0.1 p.p.m., Cu, Mo, and Zn down to 0.5 p.p.m., Pb, Bi and Sb down to 1 p.p.m. and As down to 5 p.p.m. in geological materials.

The Analyst↗