Search USGS⌕ Search

Geology topics

J.D. Bredehoeft

Publications and source records attributed to J.D. Bredehoeft.

23 records · Page 2Linked to original sources
USGS1976

An experiment in earthquake control at Rangely, Colorado

An experiment in an oil field at Rangely, Colorado, has demonstrated the feasibility of earthquake control. Variations in seismicity were produced by controlled variations in the fluid pressure in a seismically active zone. Precise earthquake locations revealed that the earthquakes clustered about a fault trending through a zone of high pore pressure produced by secondary recovery operations. Laboratory measurements of the frictional properties of the reservoir rocks and an in situ stress measurement made near the earthquake zone were used to predict the fluid pressure required to trigger earthquakes on preexisting fractures. Fluid pressure was controlled by alternately injecting and recovering water from wells that penetrated the seismic zone. Fluid pressure was monitored in observation wells, and a computer model of the reservoir was used to infer the fluid pressure distributions in the vicinity of the injection wells. The results of this experiment confirm the predicted effect of fluid pressure on earthquake activity and indicate that earthquakes can be controlled wherever we can control the fluid pressure in a fault zone.

Colorado↗
USGS1976

Status of ground-water modeling in the U.S. Geological Survey

The U.S. Geological Survey is active in the development and use of models for the analysis of various types of ground-water problems. Types of problems for which models have been, or are being, developed include: (1) ground-water flow in saturated or partially unsaturated materials, (2) land subsidence resulting from ground-water extraction, (3) flow in coupled ground water-stream systems, (4) coupling of rainfall-runoff basin models with soil moisture accounting and aquifer flow models, (5) interaction of economic and hydrologic considerations, (6) predicting the transport of contaminants in an aquifer, and (7) estimating the effects of proposed development schemes for geothermal systems. The status of modeling activity for various models is reported as being in a developmental, verification, operational, or continued improvement phase. Recently published references that provide useful details on the characteristics of the models are identified. (Woodard-USGS)

Circular↗
USGS1968

On the maintenance of anomalous fluid pressures: I. thick sedimentary sequences

Various physical and chemical processes may be envisioned which will cause anomalous pressures on an underground fluid. In order to consider the maintenance of anomalous pressure, it is necessary to consider the problem as one of nonsteady fluid flow. The time rate of pressure change and maintenance depends upon the hydrodynamics of flow through porous media and the particular boundary conditions. This paper presents a series of general solutions to hydrodynamic models which are germane to the problem of creating and maintaining excess-fluid pressures in a thick sedimentary sequence. The creation and maintenance of fluid pressures approaching lithostatic pressure through a process of continuous sedimentation was evaluated. Our results indicate that a sedimentation rate of 500 m/10 6 yr (reasonable for the Gulf Coast) will create fluid pressures approaching lithostatic in a sedimentary column that has a hydraulic conductivity of 10 -8 cm sec -1 , or lower. It is apparent that the creation of anomalous pressure and its maintenance depends, to a large degree, upon the hydraulic conductivity and, to a lesser extent, upon the specific storage of clay layers within the system. © 1968, The Geological Society of America, Inc.

Geological Society of America Bulletin↗
USGS1968

On the maintenance of anomalous fluid pressures: II. Source layer at depth

Physico-chemical mechanisms have been suggested to account for anomalous fluid pressures in the geologic environment which require a fluid source at depth. The persistence of anomalous pressure is a problem that involves nonsteady fluid flow. The hydrodynamics and particular boundary conditions control the time rate of pressure change and its maintenance. A series of mathematical solutions germane to the maintenance of anomalous pressure caused by the injection of fluids into the system from a source layer are presented. The phase change, gypsum to anhydrite plus water, is used as an example of a fluid source at depth. The thermodynamics of the gypsum-dehydration reaction indicates that conversion will probably occur at shallow depths and produce fluid at a constant rate. The dehydration of montmorillonite will also produce fluids at a constant rate under geologic conditions where the reaction can occur. If horizons of material of low permeability are missing or scarce, it is doubtful that anomalous pore pressures can be maintained for more than a geologic instant. The creation and continuation of anomalous pressure depend largely upon the hydraulic conductivity and, to a lesser extent, upon the specific storage of clay layers within the system. © 1968, The Geological Society of America, Inc.

Geological Society of America Bulletin↗