Search USGS⌕ Search

Geology topics

J. F. Slack

Publications and source records attributed to J. F. Slack.

At least 37 records · Page 2Linked to original sources

Mn-rich ilmenite from the Sullivan Pb-Zn-Ag deposit, British Columbia

Electron-microprobe analyses of 76 ilmenite grains from 13 locations in the footwall, hanging wall, and ore zone of the Sullivan Pb-Zn-Ag deposit, Kimberley, British Columbia, and from regionally developed tourmalinite of the Middle Proterozoic Aldridge Formation show two different modes that reflect two stages of formation. The first stage of ilmenite formation occurred as a result of greenschist-facies regional metamorphism, which also produced the associated Mn-rich garnet. Ilmenite from this stage forms inclusions within garnet and has a relatively low Mn content (<5.5 wt% MnO), owing to the preferential partitioning of Mn into the garnet. A second metamorphic or hydrothermal event resulted in the formation of ilmenite-bearing veinlets (+ chlorite + quartz + sulfides) that cut garnet and associated biotite. This latter type of ilmenite has a higher Mn content (up to 16.7 wt% MnO) that reflects remobilization of Mn within the local environment. Both types of Mn-rich ilmenite are considered to be derived from Mn originally concentrated in pools of dense brine that formed during synsedimentary, submarine-exhalative mineralization.

Canadian Mineralogist↗

Feruvite from the Sullivan Pb-Zn-Ag deposit, British Columbia

Feruvite, an uncommon Ca- and Fe2+-rich tourmaline species, has been discovered in the footwall of the Sullivan Pb-Zn-Ag deposit (British Columbia) near gabbro sills and dikes. Its chemical composition varies according to occurrence: feruvite from the shallow footwall has lower Ca, higher Al, and higher X-site vacancies than that from the deep footwall. The major chemical substitution involved in the feruvite is the exchange vector CaMgO???-1Al-1(OH)-1. The most important factor controlling feruvite formation at Sullivan is likely the reaction of Fe-rich hydrothermal fluids with Ca-rich minerals in gabbro and host rocks. This reaction led to the breakdown of Ca-rich minerals (plagioclase and hornblende), with release of Ca to solution and its incorporation into feruvite. This process probably postdated the main stages of formation of fine-grained, intermediate schorl-dravite in the tourmalinite pipe in the footwall, and is attributed to postore intrusion of gabbro and associated albite-chlorite-pyrite alteration.

Canadian Mineralogist↗

Clastic metasediments of the Early Proterozoic Broken Hill Group, New South Wales, Australia: Geochemistry, provenance, and metallogenic significance

Whole-rock analyses of samples of pelite, psammite, and psammopelite from the Early Proterozoic Broken Hill Group (Willyama Supergroup) in the Broken Hill Block, New South Wales, Australia, reveal distinctive geochemical signatures. Major-element data show high Al 2 O 3 and K 2 O, low MgO and Na 2 O, and relatively high Fe 2 O 3 T MgO "> Fe2O3TMgO ratios, compared to average Early Proterozoic clastic metasediments. High field strength elements (HFSE) are especially abundant, including Nb (most 15–27 ppm), Ta (most 1.0–2.2 ppm), Th (17–36 ppm), Hf (4–15 ppm), and Zr (most 170–400 ppm); Y (33–74 ppm) is also high. Concentrations of ferromagnesian elements are generally low ( Sc = < 20 ppm, Ni = ≤ 62 ppm, Co = <26 ppm; Cr = most < 100 ppm). Data for rare earth elements (REEs) show high abundances of light REEs ( La CN = 116–250 × chondrite; La CN = 437 in one sample), high La CN Yb CN "> LaCNYbCN ratios (5.6–13.9), and large negative Eu anomalies ( Eu Eu &#x2217; = 0.32&#x2013;0.57 "> EuEu∗= 0.32–0.57 ). The geochemical data indicate derivation of the metasedimentary rocks of the Broken Hill Group by the erosion mainly of felsic igneous (or meta-igneous) rocks. High concentrations of HFSE, Y, and REEs in the metasediments suggest a provenance dominanted by anorogenic granites and(or) rhyolites, including those with A-type chemistry. Likely sources of the metasediments were the rhyolitic to rhyodacitic protoliths of local quartz + feldspar ± biotite ± garnet gneisses (e.g., Potosi-type gneiss) that occur within the lower part of the Willyama Supergroup, or chemically similar basement rocks in the region; alternative sources may have included Early Proterozoic anorogenic granites and(or) rhyolites in the Mount Isa and(or) Pine Creek Blocks of northern Australia, or in the Gawler craton of South Australia. Metallogenic considerations suggest that the metasediments of the Broken Hill Block formed enriched source rocks during the generation of pegmatite-hosted deposits and concentrations of La, Ce, Nb, Ta, Th, and Sn in the region. Li, Be, B, W, and U in pegmatite minerals of the district may have been acquired during granulite-facies metamorphism of the local metasediments.

New South Wales↗

Origin and significance of tourmaline-rich rocks in the Broken Hill district, Australia

Tourmaline-rich rocks are widespread minor lithologies within the Early Proterozoic Willyama Supergroup in the Broken Hill district, Australia. Tourmaline concentrations occur in strata-bound and local stratiform tourmalinites, clastic metasedimentary rocks, quartz-gahnite lode rocks, stratiform Pb-Zn-Ag sulfide ores, garnet quartzites, strata-bound scheelite deposits, quartz-tourmaline nodules, discordant quartz veins, and granitic pegmatites. Most of the tourmaline-rich rocks are within the Broken Hill Group that hosts the main Pb-Zn-Ag ores.At the Globe mine along the northeast end of the main lodes, tourmalinites are closely associated with Pb-Zn-Ag mineralization and in places are interbedded with Mn-rich garnet quartzites. Galena and other ore minerals occur locally in the cores of recrystallized tourmaline grains in these tourmalinites, indicating that tourmaline and sulfides were present together prior to deformation and high-grade metamorphism. Electron microprobe analyses of tourmalines intergrown with Fe sulfides at the Globe mine show Mg-rich compositions relative to tourmalines in sulfide-free assemblages from the same area, suggesting early (premetamorphic) introduction of boron and Mg enrichment of tourmaline by sulfide-silicate reactions during metamorphism.Combined field and geochemical data indicate that the district tourmalinites represent normal clastic sediments that were metasomatically altered by boron-rich hydrothermal fluids at or below the sediment-water interface. Whole-rock chemical analyses of 33 tourmaline-rich rocks show linear trends of data for major and trace elements that closely resemble the trends observed for unmineralized elastic metasedimentary rocks of the district. Average Fe/Al, Mg/Al, Na/Al, and Ti/Al molar ratios of the tourmaline-rich rocks and clastic metasediments are very similar; the average K/Al molar ratio of the tourmaline-rich rocks is significantly lower than that of the clastic metasediments, reflecting the loss of K during tourmalinite formation. Chondrite-normalized patterns of rare earth elements (REE) in the quartz-rich tourmalinites are generally similar to those of the clastic metasediments, except for minor depletions of light REE; local positive and negative Ce anomalies suggest tourmalinite formation in the presence of seawater or a seawater-derived pore fluid. The geochemical data imply relative immobility of Al, Ti, Cr, and heavy REE during hydrothermal alteration and later metamorphism. Boron isotope analyses of 52 tourmaline separates show a total range of delta 11 B values from -26.8 to -17.0 per mil. Fine-grained, euhedral, nonpoikilitic tourmalines from tourmalinites in the andalusite-muscovite zone in the northern part of the district (e.g., Black Prince mine) have delta 11 B values from -21 to -17 per mil, whereas coarse granoblastic and poikilo-blastic tourmalines from the sillimanite and two-pyroxene granulite zones in the southern part of the district (e.g., Globe mine) have delta 11 B values of-24 to -19 per mil. Tourmalines in strongly retrogressed tourmalinites have delta 11 B values from about -27 to -20 per mil. The observed variations in delta 11 B are consistent with prograde and retrograde metamorphic fractionation of boron isotopes, in which the fluid phase is preferentially enriched in the heavier isotope ( 11 B). Premetamorphic hydrothermal fluids that deposited the Black Prince tourmalinites had delta 11 B values of-8 to -5 per mil at 200 degrees to 300 degrees C, suggesting a boron source from nonmarine evaporite borates.Tourmalinites in the Broken Hill district apparently formed by the same submarine hydrothermal processes as the main Pb-Zn-Ag lodes and the siliceous ferromanganese protoliths of the garnet quartzites. In our model, the hydrothermal system(s) acquired abundant boron by leaching evaporitic borates within the Thackaringa Group, the stratigraphic sequence that underlies the Broken Hill Group and most of the tourmaline concentrations. We suggest that evaporites of the Thackaringa Group provided a source of readily extractable boron for formation of the tourmalinites and also the source of the fluoride, sulfur, and perhaps the carbonate in the main lodes; such evaporites may have been critical for increased metal chloride complexing and transport necessary for deposition of the high-grade Pb-Zn-Ag ores. The Broken Hill deposit may have formed contemporaneously with the Mount Isa and McArthur River Pb-Zn-Ag deposits in similar evaporite-bearing sequences during widespread Early Proterozoic continental rifting.

Economic Geology↗

Hydrothermal and metamorphic berthierine from the Kidd Creek volcanogenic massive sulfide deposit, Timmins, Ontario

Berthierine, a 7 A?? Fe-Al member of the serpentine group, occurs in the footwall stringer zone of the Archean Kidd Creek massive sulfide deposit, associated with quartz, muscovite, chlorite, pyrite, sphalerite, chalcopyrite, and local tourmaline, cassiterite, and halloysite. Petrographic and scanning electron microscopic (SEM) studies reveal different types of berthierine occurrences, including interlayers within the rims on deformed chlorite, intergrowths with muscovite and halloysite, and discrete coarse grains. This is the first reported occurrence of berthierine from volcanogenic massive sulfide deposits. Textural relations suggest that most of the berthierine formed as a primary hydrothermal mineral at relatively high temperatures (~350??C) in the footwall stringer zone, probably by the replacement of a pre-existing aluminous phase such as muscovite or chlorite. However, the intergrowth textures observed by SEM and TEM suggest that some of the berthierine originated by syn- or post-metamorphic replacement of chlorite. -from Authors

Canadian Mineralogist↗

Boron analysis by electron microprobe using MoB4C layered synthetic crystals

Preliminary electron microprobe studies of B distribution in minerals have been carried out using MoB4C-layered synthetic crystals to improve analytical sensitivity for B. Any microprobe measurements of the B contents of minerals using this crystal must include analyses for Cl to assess and correct for the interference of Cl X-rays on the BK?? peak. Microprobe analyses for B can be made routinely in tourmaline and other B-rich minerals, and minor B contents also can be determined in common rock-forming minerals. Incorporation of unusually high B contents in minerals other than borosilicates has been discovered in prograde and retrograde minerals in tourmalinites from the Broken Hill district, Australia, and may reflect high B activities produced during the metamorphism of tourmaline-rich rocks. -from Authors

American Mineralogist↗

Boron isotopic composition of tourmaline from massive sulfide deposits and tourmalinites

Boron isotope ratios (11B/10B) have been measured on 60 tourmaline separates from over 40 massive sulfide deposits and tourmalinites from a variety of geologic and tectonic settings. The coverage of these localities is global (5 continents) and includes the giant ore bodies at Kidd Creek and Sullivan (Canada), Broken Hill (Australia), and Ducktown (USA). Overall, the tourmalines display a wide range in ??11B values from -22.8 to +18.3??? Possible controls over the boron isotopic composition of the tourmalines include: 1) composition of the boron source, 2) regional metamorphism, 3) water/rock ratios, 4) seawater entrainment, 5) temperature of formation, and 6) secular variations in seawater ??11B. The most significant control appears to be the composition of the boron source, particularly the nature of footwall lithologies; variations in water/ rock ratios and seawater entrainment are of secondary importance. The boron isotope values seem especially sensitive to the presence of evaporites (marine and non-marine) and carbonates in source rocks to the massive sulfide deposits and tourmalinites. ?? 1989 Springer-Verlag.

Contributions to Mineralogy and Petrology↗

Boron isotope evidence for the involvement of non-marine evaporites in the origin of the Broken Hill ore deposits

Identifying the palaeogeographic setting and mode of origin of stratabound ore deposits can be difficult in high-grade metamorphic terranes, where the effects of metamorphism may obscure the nature of the protoliths. Here we report boron isotope data for tourmalines from the early Proterozoic Broken Hill block, in Australia, which hosts giant lead-zinc-silver sulphide deposits. With one exception the 11 B/ 10 B ratios are lower than those for all other tourmalines from massive sulphide deposits and tour-malinites elsewhere in the world. We propose that these low ratios reflect leaching of boron from non-marine evaporitic borates by convecting hydrothermal fluids associated with early Proterozoic continental rifting. A possible modern analogue is the Salton Sea geothermal field in California.

Nature↗

Multiple hydrothermal and metamorphic events in the Kidd Creek volcanogenic massive sulphide deposit, Timmins, Ontario: evidence from tourmalines and chlorites

Tourmaline and chlorite are the principal ferromagnesian silicate minerals in the Kidd Creek massive sulphide deposit. Tourmaline is most common in sphalerite-rich peripheral margins of the chalcopyrite stringer zone. Within the north orebody, samples typically contain <1% tourmaline, but small areas (hand-specimen scale) may have 10–20%. Chlorite is more widely distributed and in places constitutes 30–50% of rock volumes. Associated assemblages may include quartz, sulphides (principally chalcopyrite, sphalerite, and (or) pyrite), carbonate, albite, sericite, and rare fluorite, allanite, or zoisite(?).The tourmalines and chlorites record a series of multiple hydrothermal and metamorphic events. Paragenetic studies suggest that tourmaline was deposited during several discrete stages of mineralization, as evidenced by brecciation and cross-cutting relationships. Most of the tourmalines have two concentric growth zones defined by different colours (green, brown, blue, yellow). Some tourmalines also display pale discordant rims that cross-cut and embay the inner growth zones and polycrystalline, multiple-extinction domains. Late sulphide veinlets (chalcopyrite, pyrrhotite) transect the inner growth zones and pale discordant rims of many crystals. The concentric growth zones are interpreted as primary features developed by the main ore-forming hydrothermal system, whereas the discordant rims, polycrystalline domains, and cross-cutting sulphide veinlets reflect post-ore metamorphic processes.Detailed electron microprobe analyses of tourmalines show a wide compositional range, from Fe-rich dravite nearly to end-member schorl, with Fe/(Fe + Mg) ratios varying from 0.33 to 0.92; only minor amounts of Ca are present, yielding uniformly high Na/(Na + Ca) ratios of 0.84–0.99. Two sets of chemical zoning trends are identified in the tourmalines, involving systematic changes in Fe/(Fe + Mg), Na/(Na + Ca), Al, and Ti that are believed to reflect internal coupled substitutions (e.g.,  + Ti = Na + Al) and local mineral equilibria (e.g., tourmaline–chlorite). Analyses of the pale discordant reaction rims show consistent depletion of Fe, Ca, and Ti, presumably by fluid–solid reactions during post-ore metamorphism.Chlorites also show an extensive range in composition, from ripidolite nearly to end-member daphnite, with Fe/(Fe + Mg) ratios of 0.43–0.98 and Si cation values of 5.00–5.39. Chlorites from the fringes of the footwall stringer zone have narrow compositional ranges, whereas chlorites near footwall rhyolite sills in the core of the stringer zone display major variations in Fe/(Fe + Mg) ratios, including one sample with a range of 0.68–0.95. The former group of chlorites has Fe/(Fe + Mg) ratios that correlate well with those of coexisting tourmalines (exclusive of late reaction rims). Data for the latter group, in contrast, fall off equilibrium K D curves, indicating that the tourmalines and chlorites within these samples are not in chemical equilibrium. The chlorites are believed to have been altered (overprinted) by Fe-rich hydrothermal fluids apparently generated during intrusion of the rhyolite sills. The tourmalines, however, are unaffected and retain primary chemical signatures.Variations in mineral proportions and mineral chemistry within the deposit mainly depend on fluctuations in temperature, pH, water/rock ratios, and amounts of entrained seawater. The major proposed control is mixing between high-temperature, Fe-rich end-member hydrothermal fluids and cold, Mg-rich entrained seawater. Fe/(Fe + Mg) variations in footwall tourmalines (and equilibrium chlorites) are believed to largely reflect the progressive infiltration of Mg-rich seawater into the margins and top of the hydrothermal system. The more Fe-rich compositions of Kidd Creek tourmalines relative to those from sediment-hosted massive sulphide deposits (e.g., Sullivan, British Columbia) may be related to the preferential generation of end-member hydrothermal fluids in proximal volcanic environments like that at Kidd Creek.

Ontario↗

U-Pb isochron age and Pb isotope systematics of the Golden Fleece vein; implications for the relationship of mineralization to the Lake City caldera, western San Juan Mountains, Colorado

A U-Pb isochron age of 27.5 + or - 0.5 m.y. has been determined for the Golden Fleece vein, southwestern Colorado, which contains an assemblage of pitchblende and gold-silver tellurides unique within the Lake City area. Initial Pb isotope ratios of ore samples from the vein ( 206 Pb/ 204 Pb = 19.08-19.58; 207 Pb/ 204 Pb = 15.643-15.682; 208 Pb/ 204 Pb = 38.533-38.84) are among the most radiogenic values reported from the San Juan Mountains and suggest that a significant component of common Pb, and possibly other metals, was derived from upper crustal Precambrian rocks by deeply circulating hydrothermal fluids. The 27.5-m.y. age of the Golden Fleece vein is identical, within analytical uncertainty, to the age of the quartz latite lavas that it cuts. This clearly documents the relationship of the vein to the waning stages of activity associated with the Uncompahgre caldera (27-29 m.y.) rather than to early activity related to the 23.1-m.y.-old Lake City caldera. Other veins in the Lake City area have Pb isotope ratios and mineral assemblages that are distinctly different from the Golden Fleece, and most of these veins are thought to be genetically related to the younger Lake City caldera.

Economic Geology↗

Geochemical survey of the Devil's Den Roadless Area, Rutland and Windsor counties, Vermont

The Devils Den Roadless Area comprises 8,830 acres of mountainous terrane in the Green Mountain National Forest, Rutland and Windsor Counties, Vt. (Index Map). Ludlow, the nearest large community, is approximately 7 air miles northeast of the study area. The small villages of Weston and East Wallingford are 3 to 5 mi to the south and north, respectively. Total relief is nearly 1,200 ft, ranging from a low elevation of 1,640 ft along the southwestern edge of the area, to a high point of about 2,860 ft in the northwest portion. Principal access is provided by state Route 100 and 155 on the southeast and northeast, and by Forest Service Road 10 along the western boundary. Old logging roads and foot trails allow entry to the interior of the study area. Several swamps and one small pond are located in topographically low areas. Drainage is principally to the south and southeast by tributaries of the south-flowing West River, ultimately discharging into the Connecticut River near Brattleboro. The Devils Den area is named for a large undercut cliff (Dale, 1915, p. 21) developed in Precambrian basement rocks. This undercut cliff forms a broad natural cave immediately west of and below Forest Service Road 10, at the head of Mt. Tabor Brook. Another much smaller cave is present in dolomite of probable Paleozoic (Early Cambrian) age on the east side of the same road. This smaller cave apparently is of artificial origin, having been made during early mining of the dolomite (Dale, 1915, p. 21). This man-made cave is the only evidence of previous mining activity within the study area.

Vermont↗

Deformation, geochemistry, and origin of massive sulfide deposits, Gossan lead district, Virginia

The Gossan Lead district is a 28-km-long, northeast-trending belt of discontinuous massive sulfide deposits in the Blue Ridge province of southwestern Virginia. The deposits, hosted by the Ashe Formation of late Proterozoic age, consist of strata-bound lenses and layers of massive pyrrhotite, minor chalcopyrite, sphalerite, and pyrite, and rare arsenopyrite and galena. Deposits were mined principally in the Iron Ridge and Betty Baker segments, respectively, at the southwestern and northeastern ends of the belt. Detailed mapping of the Gossan Howard, Huey, and Bumbarger pits in the Iron Ridge segment indicates that the deposits occur at one horizon and have been variously folded and brecciated after sulfide deposition. The Gossan Howard consists of a single, gently dipping lens of sulfide. The Huey deposit is complexly folded and locally contains tectonically thickened ore. The Bumbarger deposit is a lens as much as 40 m thick--the thickest known in the district. This deposit contains abundant coarse breccia fragments of wall rock around which the massive sulfide has flowed (during deformation and metamorphism), probably thickening the original deposit significantly. In the northeastern part of the district, drill holes intersect several sulfide layers that possibly are structurally repeated.The Ashe Formation in the district is a sequence of metasedimentary rocks and local conformable lenses of amphibolite and actinolite-chlorite schist. The metasedimentary rocks include metapelite, quartz-feldspar granofels (metagraywacke), and minor quartzite and carbonaceous schist, and are interpreted as marine turbidites. The amphibolites and other mafic rocks have chemical compositions similar to low Ti tholeiitic basalt, with a high Y/Nb (>10) and high average contents of Co (40 ppm), Cr (403 ppm), Ni (211 ppm), and V (247 ppm). Immobile trace element signatures (Ti-Y-Zr; Th-Hf-Ta; Ti-Cr) suggest a magmatic affinity with midocean ridge basalt (MORB); rare earth elements (REE) have low abundance levels (10X-15X chondrite), broadly flat patterns [(La/Yb) N = 0.7-1.1], and a slight depletion in the light elements similar to midocean ridge basalts. An amphibolite from a much higher stratigraphic level, south of the district, differs significantly from the mafic rocks closer to the sulfide zone in having the chemical signature of a transitional, slightly alkalic tholeiite with high TiO 2 (3.87 wt %), Fe 2 O 3 (16.4 wt %), and P 2 O 5 (0.56 wt %), low Y/Nb (3.3), and a highly fractionated rare earth element distribution [(La/Yb) N = 3.9] similar to continental basalt.Some silicate wall rocks of the deposits are mineralogically and chemically unusual, and differ substantially from the clastic metasediments of the Ashe Formation. Such rocks are composed mainly or wholly of plagioclase feldspar, biotite, chlorite, muscovite, or spessartine-rich garnet. The unusual lithologies form local strata-bound lenses in the footwall and/or hanging wall of the deposits, typically within 10 m of massive sulfide. The plagioclase rocks (3.4-7.6 wt % Na 2 O) consist largely of granoblastic albite-oligoclase (Ab (sub 78-90) ) with minor quartz and biotite; rare earth elements are highly fractionated [(La/Yb) N = 6.8-7.1] and their patterns resemble those of the quartz-feldspar granofels (metagraywacke) from the district.The biotite schists, locally monomineralic, have FeO/(FeO + MgO) = 0.5 and contain high phosphorus (1 wt % P 2 O 5 ) and fluorine (0.5 wt % F), present in fluorapatite. The chlorite schist is essentially all ripidolite; rare earth elements are highly fractionated, and have a large negative Eu anomaly. The spessartine-rich rocks (6.3-8.9 wt % MnO) are in places interlayered with the other unusual wall rocks and consist of abundant Mn-rich garnet (Sp 50 Al 23 Gr 19 Py 8 ) and minor quartz, plagioclase, pyrrhotite, and biotite. The distinctive mineralogy and chemistry of these rocks suggest that they represent metamorphosed alteration zones and/or intermixed chemical and clastic sediments.The sulfide deposits are interpreted as syngenetic in origin but modified in form by deformation which accompanied metamorphism. The great length of the mineralized district parallel to the regional strike and the flyschoid (turbidite) nature of the host rocks suggest that sedimentation and initial sulfide deposition took place in a deep, elongate marine basin or graben overlying a crustal rift zone. A rift underlying the sedimentary pile is consistent with the occurrence of mafic metavolcanic rocks of midocean ridge basalt affinity and could also have served as the feeder system for a line of hydrothermal vents on the sea floor that generated the sulfide deposits.

Economic Geology↗

Stratiform tourmalinites in metamorphic terranes and their geologic significance

Stratiform tourmalinites are significant minor rock types in many regional metamorphic terranes of the world. Tourmalinites are more widespread than previously recognized and are especially common in Proterozoic and early Paleozoic sequences dominated by clastic metasedimentary rocks. They consist of conformable layers made up primarily of quartz and abundant tourmaline, the latter typically exceeding 15% to 20% of rock volumes. A few tourmalinites display striking sedimentary structures such as graded bedding, cross-laminations, slump and flame structures, and rip-up clasts. These and other geologic features provide important constraints for assessing the origin of these rocks, and they suggest that tourmalinites form by the early diagenetic modification of a primary boron-rich chemical precipitate. Tourmalinites are significant in preserving a valuable record of unusual chemical and paleogeographic conditions in clastic sedimentary basins, and in their close association with a variety of stratabound mineral deposits.

Geology↗