Search USGSSearch

Geology topics

I.C. Yang

Publications and source records attributed to I.C. Yang.

6 recordsLinked to original sources

Chemical analyses of pore water from boreholes USW SD-6 and USW WT-24, Yucca Mountain, Nevada

Analyses of pore water extracted from cores of boreholes USW SD-6 in the central part and USW WT-24 in the northern part of Yucca Mountain, Nevada, show significant vertical and lateral variations in dissolved-ion concentrations. Analyses of samples of only a few milliliters of pore water extracted by uniaxial or triaxial compression and by ultracentrifugation methods from adjacent core samples are generally in agreement, within the analytical error of 10% to 15%. However, the values of silica for water obtained by ultracentrifugation are consistently lower than values for water obtained by compression. The larger concentrations probably are due to localized pressure solution of silicate minerals during compression. The shallower water from core in borehole USW SD-6 was extracted from nonwelded units collectively referred to as the Paintbrush Tuff nonwelded (PTn). The deeper water was from core in both boreholes USW SD-6 and USW WT-24 in the nonwelded units referred to as the Calico Hills nonwelded (CHn). Significant differences in mean dissolved-ion concentrations in pore water between the PTn and CHn are (1) decreases in Ca, Mg, SO4, and NO3 and (2) increases in HCO3 and (Na+K)/(Ca+Mg) ratios. The decrease in NO3 and the increase in HCO3 could be the result of denitrification through the oxidation of organic matter. The decrease in Ca and associated increase in (Na+K)/(Ca+Mg) is the result of ion exchange with zeolites in the CHn in borehole USW WT-24. This effect is not nearly as pronounced in borehole USW SD-6, probably reflecting a smaller amount of zeolitization of the CHn in USW SD-6. Geochemical calculations using the PHREEQC code indicate that the pore water from both boreholes USW SD-6 and USW WT-24 is uniformly undersaturated in anhydrite, gypsum, and amorphous silica, but supersaturated in quartz and chalcedony. The saturation of calcite, aragonite, sepiolite, and dolomite is more variable from sample to sample. ?? 2002 Elsevier Science B.V. All rights reserved.

Journal of Contaminant Hydrology

Percolation flux and Transport velocity in the unsaturated zone, Yucca Mountain, Nevada

The percolation flux for borehole USW UZ-14 was calculated from 14C residence times of pore water and water content of cores measured in the laboratory. Transport velocity is calculated from the depth interval between two points divided by the difference in 14C residence times. Two methods were used to calculate the flux and velocity. The first method uses the 14C data and cumulative water content data directly in the incremental intervals in the Paintbrush nonwelded unit and the Topopah Spring welded unit. The second method uses the regression relation for 14C data and cumulative water content data for the entire Paintbrush nonwelded unit and the Topopah Spring Tuff/Topopah Spring welded unit. Using the first method, for the Paintbrush nonwelded unit in boreholeUSW UZ-14 percolation flux ranges from 2.3 to 41.0 mm/a. Transport velocity ranges from 1.2 to 40.6 cm/a. For the Topopah Spring welded unit percolation flux ranges from 0.9 to 5.8 mm/a in the 8 incremental intervals calculated. Transport velocity ranges from 1.4 to 7.3 cm/a in the 8 incremental intervals. Using the second method, average percolation flux in the Paintbrush nonwelded unit for 6 boreholes ranges from 0.9 to 4.0 mm/a at the 95% confidence level. Average transport velocity ranges from 0.6 to 2.6 cm/a. For the Topopah Spring welded unit and Topopah Spring Tuff, average percolation flux in 5 boreholes ranges from 1.3 to 3.2 mm/a. Average transport velocity ranges from 1.6 to 4.0 cm/a. Both the average percolation flux and average transport velocity in the PTn are smaller than in the TS/TSw. However, the average minimum and average maximum values for the percolation flux in the TS/TSw are within the PTn average range. Therefore, differences in the percolation flux in the two units are not significant. On the other hand, average, average minimum, and average maximum transport velocities in the TS/TSw unit are all larger than the PTn values, implying a larger transport velocity for the TS/TSw although there is a small overlap.

Applied Geochemistry