Geology topics

Henry P. Heasler

Publications and source records attributed to Henry P. Heasler.

4 recordsLinked to original sources

USGS2016

Geothermal solute flux monitoring and the source and fate of solutes in the Snake River, Yellowstone National Park, WY

The combined geothermal discharge from over 10,000 features in Yellowstone National Park (YNP) can be can be estimated from the Cl flux in the Madison, Yellowstone, Falls, and Snake Rivers. Over the last 30 years, the Cl flux in YNP Rivers has been calculated using discharge measurements and Cl concentrations determined in discrete water samples and it has been determined that approximately 12% of the Cl flux exiting YNP is from the Snake River. The relationship between electrical conductivity and concentrations of Cl and other geothermal solutes was quantified at a monitoring site located downstream from the thermal inputs in the Snake River. Beginning in 2012, continuous (15 min) electrical conductivity measurements have been made at the monitoring site. Combining continuous electrical conductivity and discharge data, the Cl and other geothermal solute fluxes were determined. The 2013–2015 Cl fluxes (5.3–5.8 kt/yr) determined using electrical conductivity are comparable to historical data. In addition, synoptic water samples and discharge data were obtained from sites along the Snake River under low-flow conditions of September 2014. The synoptic water study extended 17 km upstream from the monitoring site. Surface inflows were sampled to identify sources and to quantify solute loading. The Lewis River was the primary source of Cl, Na, K, Cl, SiO 2 , Rb, and As loads (50–80%) in the Snake River. The largest source of SO 4 was from the upper Snake River (50%). Most of the Ca and Mg (50–55%) originate from the Snake Hot Springs. Chloride, Ca, Mg, Na, K, SiO 2 , F, HCO 3 , SO 4 , B, Li, Rb, and As behave conservatively in the Snake River, and therefore correlate well with conductivity (R 2 ≥ 0.97).

Wyoming↗

USGS2014

Hydrogeology of the Old Faithful area, Yellowstone National Park, Wyoming, and its relevance to natural resources and infrastructure

A panel of leading experts (The Old Faithful Science Review Panel) was convened by Yellowstone National Park (YNP) to review and summarize the geological and hydrological understanding that can inform National Park Service management of the Upper Geyser Basin area. We give an overview of present geological and hydrological knowledge of the Old Faithful hydrothermal (hot water) system and related thermal areas in the Upper Geyser Basin. We prioritize avenues for improving our understanding of key knowledge gaps that limit informed decision-making regarding human use in this fragile natural landscape. Lastly, we offer guidelines to minimize impacts to the hydrothermal system that could be used to aid decisions by park management. Old Faithful sits within the Upper Geyser Basin, an area of abundant hydrothermal activity where boiling waters extend from the surface to significant depth within glacial sediments and underlying volcanic rocks. The geyser systems are directly fed by waters recharged decades to millennia ago, which are surrounded by colder, younger waters. Activity of the geysers is controlled by complex subsurface plumbing with fractures and conduits separated by regions of low permeability. Observations over the past century indicate that the thermal areas and their features are both fragile and highly dynamic. Although Old Faithful has erupted regularly for the past 150 years, it exhibits changes in eruptive behavior over time, and the average interval between eruptions has increased by about 50 percent over the past 50 years. It is clear that human activity has modified the hydrothermal system in the past; conversely, natural features pose ongoing hazards to humans and human infrastructure. Current (2014) long-term programs to measure heat discharge by chloride-flux monitoring, and more recently by thermal-infrared imaging, are crucial for assessing the status of the hydrothermal system. Complementary studies could include airborne resistivity, environmental tracers, numerical modeling, and greater emphasis on measuring the discharge of water during geyser eruptions. Such data are needed to better understand the subsurface plumbing systems that feed the geysers. Further understanding can be gained through installation of shallow groundwater observation wells, surface geophysical studies, and direct measurement of temperature gradients near the surface. It also is critical to archive existing data from all studies in a manner that will be readily accessible to scientists and decision makers. Monitoring and data collection can be achieved through the YNP geology program, by direct funding to other groups, or by encouraging and facilitating externally funded research. There are many documented examples at YNP and elsewhere where human infrastructure and natural thermal features have negatively affected each other. Unless action is taken, human conflicts with the Old Faithful hydrothermal system are likely to increase over the coming years. This is partly because of the increase in park visitation over the past decades, but also because the interval between eruptions of Old Faithful has increased, lengthening the time spent (and services needed) for each visitor at Old Faithful. To avoid an increase in visitor impacts, the National Park Service should consider 2 alternate strategies to accommodate people, vehicles, and services in the Upper Geyser Basin, such as shuttle services from staging (parking and dining) areas with little or no recent hydrothermal activity. We further suggest that YNP consider a zone system to guide maintenance and development of infrastructure in the immediate Old Faithful area. A “red” zone includes hydrothermally active land where new development is discouraged and existing infrastructure is modified with great care. An outer “green” zone represents areas where cooler temperatures and less hydrothermal flow are thought to exist, and where development and maintenance could proceed as occurs elsewhere in the park. An intermediate “yellow” zone would require preliminary assessment of subsurface temperatures and gas concentrations to assess suitability for infrastructure development. The panel recommends that YNP management follow the lead of the National Park System Advisory Board Science Committee (2012) by applying the “precautionary principle” when making decisions regarding the interaction of hydrothermal phenomena and park infrastructure in the Old Faithful area and other thermal areas within YNP.

Wyoming↗

USGS2012

Water chemistry and electrical conductivity database for rivers in Yellowstone National Park, Wyoming

Chloride flux has been used to estimate heat flow in volcanic environments since the method was developed in New Zealand by Ellis and Wilson (1955). The method can be applied effectively at Yellowstone, because nearly all of the water discharged from its thermal features enters one of four major rivers (the Madison, Yellowstone, Snake, and Falls Rivers) that drain the park, and thus integration of chloride fluxes from all these rivers provides a means to monitor the total heat flow from the entire Yellowstone volcanic system (Fournier and others, 1976; Fournier, 1979). Fournier (1989) summarized the results and longterm heat-flow trends from Yellowstone, and later efforts that applied the chloride inventory method to estimate heat flow were described by Ingebritsen and others (2001) and Friedman and Norton (2007). Most recently, the U.S. Geological Survey (USGS), in conjunction with the National Park Service, has provided publicly accessible reports on solute flux, based on periodic sampling at selected locations (Hurwitz and others, 2007a,b). While these studies have provided a wealth of valuable data, winter travel restrictions and the great distances between sites present significant logistical challenges and have limited collection to a maximum of 28 samples per site annually. This study aims to quantify relations between solute concentrations (especially chloride) and electrical conductivity for several rivers in Yellowstone National Park (YNP), by using automated samplers and conductivity meters. Norton and Friedman (1985) found that chloride concentrations and electrical conductivity have a good correlation in the Falls, Snake, Madison, and Yellowstone Rivers. However, their results are based on limited sampling and hydrologic conditions and their relation with other solutes was not determined. Once the correlations are established, conductivity measurements can then be used as a proxy for chloride concentrations, thereby enabling continuous heat-flow estimation on a much finer timescale and at lower cost than is currently possible with direct sampling. This publication serves as a repository for all data collected during the course of the study from May 2010 through July 2011, but it does not include correlations between solutes and conductivity or recommendations for quantification of chloride through continuous electrical conductivity measurements. This will be the object of a future document.

Wyoming↗

USGS2007

Systematics of Water Temperature and Flow at Tantalus Creek During Calendar Year 2005, Norris Geyser Basin, Yellowstone National Park, Wyoming

We analyze data for stream flow and water temperature from Tantalus Creek in the Norris Geyser Basin and their relationship to air temperature, precipitation, and geyser eruptions during calendar year 2005. The creek is of interest because it is the primary drainage of the Norris Geyser Basin and carries a very high proportion of thermal water derived directly from hot springs. Two separate diurnal patterns emerge - (1) a winter pattern where increases in water temperature and stream flow closely track those of air temperature and (2) a summer pattern where water and air temperature are closely aligned but stream flow declines once water temperature reaches its daily maximum. The winter pattern is present when the daily average temperature consistently drops below 0 ?C whereas the summer pattern is recognizable when the daily average temperature regularly exceeds 0 ?C. Spring and fall systematics are much more irregular, although both summer and winter patterns can be discerned occasionally during those seasons. We interpret increases in stream flow associated with the winter pattern to result from addition of locally sourced melt water (both snow and soil-bound ice) that increases in abundance once temperatures increase in the morning. Melting is facilitated by the warm ground temperatures in the geyser basin, which are significantly higher than air temperatures in the winter. The summer pattern appears to be strongly affected by increased evaporation in the afternoon, decreasing flow and cooling the remaining water. Discharge from eruptions at Echinus Geyser are clearly visible as peaks in the hydrograph, and indicate that water from this geyser reach the Tantalus weir in 80 to 90 minutes, reflecting a slug of water that travels about 0.4 m s-1.

Scientific Investigations Report↗