Geology topics

Harrison J. Gray

Publications and source records attributed to Harrison J. Gray.

32 records · Page 2Linked to original sources

USGS2021

A maximum rupture model for the central and southern Cascadia subduction zone—reassessing ages for coastal evidence of megathrust earthquakes and tsunamis

A new history of great earthquakes (and their tsunamis) for the central and southern Cascadia subduction zone shows more frequent (17 in the past 6700 yr) megathrust ruptures than previous coastal chronologies. The history is based on along-strike correlations of Bayesian age models derived from evaluation of 554 radiocarbon ages that date earthquake evidence at 14 coastal sites. We reconstruct a history that accounts for all dated stratigraphic evidence with the fewest possible ruptures by evaluating the sequence of age models for earthquake or tsunami contacts at each site, comparing the degree of temporal overlap of correlated site age models, considering evidence for closely spaced earthquakes at four sites, and hypothesizing only maximum-length megathrust ruptures. For the past 6700 yr, recurrence for all earthquakes is 370–420 yr. But correlations suggest that ruptures at ∼1.5 ka and ∼1.1 ka were of limited extent (<400 km). If so, post-3-ka recurrence for ruptures extending throughout central and southern Cascadia is 510–540 yr. But the range in the times between earthquakes is large: two instances may be ∼50 yr, whereas the longest are ∼550 and ∼850 yr. The closely spaced ruptures about 1.6 ka may illustrate a pattern common at subduction zones of a long gap ending with a great earthquake rupturing much of the subduction zone, shortly followed by a rupture of more limited extent. The ruptures of limited extent support the continued inclusion of magnitude-8 earthquakes, with longer ruptures near magnitude 9, in assessments of seismic hazard in the region.

British Columbia, Washington, Oregon, California↗

USGS2020

Depth-dependent soil mixing persists across climate zones

Soil mixing over long (>10 2 y) timescales enhances nutrient fluxes that support soil ecology, contributes to dispersion of sediment and contaminated material, and modulates fluxes of carbon through Earth’s largest terrestrial carbon reservoir. Despite its foundational importance, we lack robust understanding of the rates and patterns of soil mixing, largely due to a lack of long-timescale data. Here we demonstrate that luminescence, a light-sensitive property of minerals used for geologic dating, can be used as a long-timescale sediment tracer in soils to reveal the structure of soil mixing. We develop a probabilistic model of transport and mixing of tracer particles and associated luminescence in soils and compare with a global compilation of luminescence versus depth in various locations. The model–data comparison reveals that soil mixing rate varies over the soil depth, with this depth dependency persisting across climate and ecological zones. The depth dependency is consistent with a model in which mixing intensity decreases linearly or exponentially with depth, although our data do not resolve between these cases. Our findings support the long-suspected idea that depth-dependent mixing is a spatially and temporally persistent feature of soils. Evidence for a climate control on the patterns and intensities of soil mixing with depth remains elusive and requires the further study of soil mixing processes.

PNAS↗

USGS2019

Luminescence as a sediment tracer and provenance tool

Luminescence holds unique potential as a sediment tracer and provenance method. The tracer application of luminescence has key advantages including ease of measurement, relatively low cost, and applicability to geologically ubiquitous quartz and feldspar sand and silt. These advantages can help answer fundamental questions about geomorphology, sediment transport, sediment production, and the tectonic/climatic controls on source‐to‐sink sedimentary systems. There is a notable body of research on luminescence as a sediment tracer. These tracer methods range from identifying source locations based on unique luminescence characteristics, to observing changes in luminescence characteristics with transport, to using residual luminescence to infer rates of transport. Previous applications of luminescence include provenance and quantification of fluvial transport rate, tracing of coastal longshore drift, estimations of mixing rates in soil or sediment, and provenance of wind‐blown deposits. The few studies that compare luminescence methods with nonluminescence tracer methods show good agreement. However, more work is needed to test the application of luminescence tracers in sediments. Future research directions should focus on comparing luminescence‐based with nonluminescence tracer methods. Furthermore, research is needed on the effects of specific geomorphic processes on luminescence characteristics and residual doses. While there is significant potential for future research, luminescence is already a useful sediment tracer and provenance tool applicable to a wide range of geomorphic environments.

Reviews of Geophysics↗

USGS2018

Paleoseismic results from the Alpine site, Wasatch fault zone: Timing and displacement data for six holocene earthquakes at the Salt Lake City–Provo segment boundary

To improve the characterization of Holocene earthquakes on the Wasatch fault zone (WFZ), we conducted light detection and ranging (lidar)‐based neotectonic mapping and excavated a paleoseismic trench across an 8‐m‐high fault scarp near Alpine, Utah, located < 1    km "> < 1 km <1 km south of the boundary between the Salt Lake City and Provo segments (SLCS and PS). We document evidence for six paleoearthquakes (AL6–AL1) from scarp‐derived colluvial wedges and crosscutting relations. A ground‐penetrating radar survey across the scarp resolved fault‐zone width, but not paleoearthquake stratigraphy. Bayesian (OxCal) modeling of 13 radiocarbon and 13 optically stimulated luminescence ages indicates that six earthquakes occurred ∼ 6.2 – 0.4    ka "> ∼ 6.2 – 0.4 ka ∼6.2–0.4 ka . Interseismic recurrence ranges from 0.2 to 1.8 ky (mean 1.2 ky). We estimate 6.5 ± 0.7    m "> 6.5 ± 0.7 m 6.5±0.7 m of cumulative vertical tectonic displacement across the ≥ 14 ‐ m ‐ wide "> ≥ 14 ‐ m ‐ wide ≥14‐m‐wide fault zone used near‐field observations of scarp‐derived colluvial‐wedge thicknesses, antithetic faulting, and graben backtilting. This is similar to our independent estimate of 6.5 ± 0.5    m "> 6.5 ± 0.5 m 6.5±0.5 m using far‐field observations of the offset ground surface and correlation of alluvial‐fan stratigraphy across the WFZ. These results suggest that colluvial‐wedge thickness at the Alpine site approximates one‐half the original west‐facing fault scarp height. Per‐event vertical displacements range from 0.8 to 1.2 m (mean 1.1 m), which we use to estimate surface rupture lengths that may exceed 50 km from earthquakes as large as moment magnitude ( M w "> M w Mw ) ∼ 7.0 "> ∼ 7.0 ∼7.0 . The late Holocene average vertical slip rate is 0.9    mm / yr "> 0.9 mm / yr 0.9 mm/yr ( 0.7 – 1.2    mm / yr "> 0.7 – 1.2 mm / yr 0.7–1.2 mm/yr range). Earthquake frequency has increased in the past ∼ 1    ky "> ∼ 1 ky ∼1 ky , whereas displacement per event has been similar for the past ∼ 6    ky "> ∼ 6 ky ∼6 ky , suggesting that strain accumulation is not the sole factor that controls the frequency and size of earthquakes at the SLCS–PS segment boundary. These findings can be used for a more nuanced characterization of earthquakes at the SLCS–PS boundary and improve earthquake hazard assessments along the Wasatch Front.

Utah↗

USGS2018

Application of a luminescence‐based sediment transport model

Quantifying the transport history of sand is a challenging but important goal in geomorphology. In this paper, we take a simple idea that luminescence is bleached during transport and regenerates during storage, and use this as a basis to re‐envision luminescence as a sediment tracer. We apply a mathematical model describing luminescence through an idealized channel and reservoir system and then compare this idealized model to real rivers to see if luminescence can reproduce known sediment transport data. We provide results from application of this luminescence method in three rivers from the mid‐Atlantic region of the United States. This method appears promising. However, as a river system diverges from idealized conditions of the mathematical model, the luminescence data diverge from model predictions. We suggest that spatial variation in the delivery of sediment from hillslopes can be reflected in the channel sediment luminescence and that luminescence acts as a function of landscape dynamics.

Geophysical Research Letters↗

USGS2018

Examining the relationship between portable luminescence reader measurements and depositional ages of paleowetland sediments, Las Vegas Valley, Nevada

Portable luminescence readers are exciting new tools that have the potential to rapidly determine the age structure of late Quaternary stratigraphic columns. This is important because high-resolution age profiling can reveal details about the temporal dynamics of climate cause and ecosystem effect, often while researchers are still in the field. In this paper, we compare new portable luminescence reader measurements of total photon counts with a suite of robust, highly resolved ages from middle to late Pleistocene-age paleowetland deposits in the Las Vegas Valley of southern Nevada. Our results show that total photon counts correlate with age, with a quadratic equation providing the best fit to the data. Significant scatter is present in the data, which is likely the result of dose rate variations, multiple sediment sources, and transport mechanisms that include both eolian and fluvial processes. The observed scatter can be reduced significantly using a simple pretreatment procedure involving a 250 μm sieve and neodymium hand magnet to normalize particle sizes and remove magnetic grains. Following this treatment, age estimates based on the reader measurements have an average error of 30 ± 18% when compared against known ages. These findings confirm that portable reader measurements scale with age in paleowetland deposits, allowing its use in establishing rapid, albeit approximate, chronologies for these deposits throughout the American Southwest.

Nevada↗

USGS2017

On extracting sediment transport information from measurements of luminescence in river sediment

Accurately quantifying sediment transport rates in rivers remains an important goal for geomorphologists, hydraulic engineers, and environmental scientists. However, current techniques for measuring long-time scale (102–106 years) transport rates are laborious, and formulae to predict transport are notoriously inaccurate. Here we attempt to estimate sediment transport rates by using luminescence, a property of common sedimentary minerals that is used by the geoscience community for geochronology. This method is advantageous because of the ease of measurement on ubiquitous quartz and feldspar sand. We develop a model from first principles by using conservation of energy and sediment mass to explain the downstream pattern of luminescence in river channel sediment. We show that the model can accurately reproduce the luminescence observed in previously published field measurements from two rivers with very different sediment transport styles. The model demonstrates that the downstream pattern of river sand luminescence should show exponential-like decay in the headwaters which asymptotes to a constant value with further downstream distance. The parameters from the model can then be used to estimate the time-averaged virtual velocity, characteristic transport lengthscale, storage time scale, and floodplain exchange rate of fine sand-sized sediment in a fluvial system. The sediment transport values predicted from the luminescence method show a broader range than those reported in the literature, but the results are nonetheless encouraging and suggest that luminescence demonstrates potential as a sediment transport indicator. However, caution is warranted when applying the model as the complex nature of sediment transport can sometimes invalidate underlying simplifications.

Journal of Geophysical Research F: Earth Surface↗

USGS2017

A geochronologic framework for the Ziegler Reservoir fossil site, Snowmass Village, Colorado

The Ziegler Reservoir fossil site near Snowmass Village, Colorado, provides a unique opportunity to reconstruct high-altitude paleoenvironmental conditions in the Rocky Mountains during the last interglacial period. We used four different techniques to establish a chronological framework for the site. Radiocarbon dating of lake organics, bone collagen, and shell carbonate, and in situ cosmogenic 10 Be and 26 Al ages on a boulder on the crest of a moraine that impounded the lake suggest that the ages of the sediments that hosted the fossils are between ~ 140 ka and > 45 ka. Uranium-series ages of vertebrate remains generally fall within these bounds, but extremely low uranium concentrations and evidence of open-system behavior limit their utility. Optically stimulated luminescence (OSL) ages (n = 18) obtained from fine-grained quartz maintain stratigraphic order, were replicable, and provide reliable ages for the lake sediments. Analysis of the equivalent dose (D E ) dispersion of the OSL samples showed that the sediments were fully bleached prior to deposition and low scatter suggests that eolian processes were likely the dominant transport mechanism for fine-grained sediments into the lake. The resulting ages show that the fossil-bearing sediments span the latest part of marine isotope stage (MIS) 6, all of MIS 5 and MIS 4, and the earliest part of MIS 3.

Colorado↗

USGS2017

A high-elevation, multi-proxy biotic and environmental record of MIS 6-4 from the Ziegler Reservoir fossil site, Snowmass Village, Colorado, USA

In North America, terrestrial records of biodiversity and climate change that span Marine Oxygen Isotope Stage (MIS) 5 are rare. Where found, they provide insight into how the coupling of the ocean–atmosphere system is manifested in biotic and environmental records and how the biosphere responds to climate change. In 2010–2011, construction at Ziegler Reservoir near Snowmass Village, Colorado (USA) revealed a nearly continuous, lacustrine/wetland sedimentary sequence that preserved evidence of past plant communities between ~ 140 and 55 ka, including all of MIS 5. At an elevation of 2705 m, the Ziegler Reservoir fossil site also contained thousands of well-preserved bones of late Pleistocene megafauna, including mastodons, mammoths, ground sloths, horses, camels, deer, bison, black bear, coyotes, and bighorn sheep. In addition, the site contained more than 26,000 bones from at least 30 species of small animals including salamanders, otters, muskrats, minks, rabbits, beavers, frogs, lizards, snakes, fish, and birds. The combination of macro- and micro-vertebrates, invertebrates, terrestrial and aquatic plant macrofossils, a detailed pollen record, and a robust, directly dated stratigraphic framework shows that high-elevation ecosystems in the Rocky Mountains of Colorado are climatically sensitive and varied dramatically throughout MIS 5.

Colorado↗

USGS2017

User guide for luminescence sampling in archaeological and geological contexts

Luminescence dating provides a direct age estimate of the time of last exposure of quartz or feldspar minerals to light or heat and has been successfully applied to deposits, rock surfaces, and fired materials in a number of archaeological and geological settings. Sampling strategies are diverse and can be customized depending on local circumstances, although all sediment samples need to include a light-safe sample and material for dose-rate determination. The accuracy and precision of luminescence dating results are directly related to the type and quality of the material sampled and sample collection methods in the field. Selection of target material for dating should include considerations of adequacy of resetting of the luminescence signal (optical and thermal bleaching), the ability to characterize the radioactive environment surrounding the sample (dose rate), and the lack of evidence for post-depositional mixing (bioturbation in soils and sediment). Sample strategies for collection of samples from sedimentary settings and fired materials are discussed. This paper should be used as a guide for luminescence sampling and is meant to provide essential background information on how to properly collect samples and on the types of materials suitable for luminescence dating.

Advances in Archaeological Practice: A Journal of ↗

USGS2017

Dating of river terraces along Lefthand Creek, western High Plains, Colorado, reveals punctuated incision

The response of erosional landscapes to Quaternary climate oscillations is recorded in fluvial terraces whose quantitative interpretation requires numerical ages. We investigate gravel-capped strath terraces along the western edge of Colorado's High Plains to constrain the incision history of this shale-dominated landscape. We use ¹⁰Be and ²⁶Al cosmogenic radionuclides (CRNs), optically stimulated luminescence (OSL), and thermally transferred OSL (TT-OSL) to date three strath terraces, all beveled in shale bedrock and then deposited upon by Lefthand Creek, which drains the crystalline core of the Front Range. Our study reveals: (i) a long history (hundreds of thousands of years) of fluvial occupation of the second highest terrace, T2 (Table Mountain), with fluvial abandonment at 92 ± 3 ka; (ii) a brief occupation of a narrow and spatially confined terrace, T3, at 98 ± 7 ka; and (iii) a 10–25 thousand year period of cutting and fluvial occupation of a lower terrace, T4, marked by the deposition of a lower alluvial unit between 59 and 68 ka, followed by deposition of an upper alluvial package at 40 ± 3 ka. In conjunction with other recent CRN studies of strath terraces along the Colorado Front Range (Riihimaki et al., 2006; Dühnforth et al., 2012), our data reveal that long periods of lateral planation and fluvial occupation of strath terraces, sometimes lasting several glacial-interglacial cycles, are punctuated by brief episodes of rapid vertical bedrock incision. These data call into question what a singular terrace age represents, as the strath may be cut at one time (its cutting-age) and the terrace surface may be abandoned at a much later time (its abandonment age), and challenge models of strath terraces that appeal to simple pacing by the glacial-interglacial cycles.

Colorado↗

USGS2015

Variables and potential models for the bleaching of luminescence signals in fluvial environments

Luminescence dating of fluvial sediments rests on the assumption that sufficient sunlight is available to remove a previously obtained signal in a process deemed bleaching. However, luminescence signals obtained from sediment in the active channels of rivers often contain residual signals. This paper explores and attempts to build theoretical models for the bleaching of luminescence signals in fluvial settings. We present two models, one for sediment transported in an episodic manner, such as flood-driven washes in arid environments, and one for sediment transported in a continuous manner, such as in large continental scale rivers. The episodic flow model assumes that the majority of sediment is bleached while exposed to sunlight at the near surface between flood events and predicts a power-law decay in luminescence signal with downstream transport distance. The continuous flow model is developed by combining the Beer–Lambert law for the attenuation of light through a water column with a general-order kinetics equation to produce an equation with the form of a double negative exponential. The inflection point of this equation is compared with the sediment concentration from a Rouse profile to derive a non-dimensional number capable of assessing the likely extent of bleaching for a given set of luminescence and fluvial parameters. Although these models are theoretically based and not yet necessarily applicable to real-world fluvial systems, we introduce these ideas to stimulate discussion and encourage the development of comprehensive bleaching models with predictive power.

Quaternary International↗

USGS2015

Guide to luminescence dating techniques and their application for paleoseismic research

Over the past 25 years, luminescence dating has become a key tool for dating sediments of interest in paleoseismic research. The data obtained from luminescence dating has been used to determine timing of fault displacement, calculate slip rates, and estimate earthquake recurrence intervals. The flexibility of luminescence is a key complement to other chronometers such as radiocarbon or cosmogenic nuclides. Careful sampling and correct selection of sample sites exert two of the strongest controls on obtaining an accurate luminescence age. Factors such as partial bleaching and post-depositional mixing should be avoided during sampling and special measures may be needed to help correct for associated problems. Like all geochronologic techniques, context is necessary for interpreting and calculating luminescence results and this can be achieved by supplying participating labs with associated trench logs, photos, and stratigraphic locations of sample sites.

Conference Paper↗

USGS2014

Quaternary landscape development, alluvial fan chronology and erosion of the Mecca Hills at the southern end of the San Andreas Fault zone

Quantitative geomorphic analysis combined with cosmogenic nuclide 10 Be-based geochronology and denudation rates have been used to further the understanding of the Quaternary landscape development of the Mecca Hills, a zone of transpressional uplift along the southern end of the San Andreas Fault, in southern California. The similar timing of convergent uplifts along the San Andreas Fault with the initiation of the sub-parallel San Jacinto Fault suggest a possible link between the two tectonic events. The ages of alluvial fans and the rates of catchment-wide denudation have been integrated to assess the relative influence of climate and tectonic uplift on the development of catchments within the Mecca Hills. Ages for major geomorphic surfaces based on 10 Be surface exposure dating of boulders and 10 Be depth profiles define the timing of surface stabilization to 2.6 +5.6/–1.3 ka (Qyf1 surface), 67.2 ± 5.3 ka (Qvof2 surface), and 280 ± 24 ka (Qvof1 surface). Comparison of 10 Be measurements from active channel deposits (Qac) and fluvial terraces (Qt) illustrate a complex history of erosion, sediment storage, and sediment transport in this environment. Beryllium-10 catchment-wide denudation rates range from 19.9 ± 3.2 to 149 ± 22.5 m/Ma and demonstrate strong correlations with mean catchment slope and with total active fault length normalized by catchment area. The lack of strong correlation with other geomorphic variables suggests that tectonic uplift and rock weakening have the greatest control. The currently measured topography and denudation rates across the Mecca Hills may be most consistent with a model of radial topographic growth in contrast to a model based on the rapid uplift and advection of crust.

California↗