Geology topics

Gregory E. Tucker

Publications and source records attributed to Gregory E. Tucker.

14 recordsLinked to original sources

USGS2024

Catchment coevolution and the geomorphic origins of variable source area hydrology

Features of landscape morphology—including slope, curvature, and drainage dissection—are important controls on runoff generation in upland landscapes. Over long timescales, runoff plays an essential role in shaping these same features through surface erosion. This feedback between erosion and runoff generation suggests that modeling long-term landscape evolution together with dynamic runoff generation could provide insight into hydrological function. Here we examine the emergence of variable source area runoff generation in a new coupled hydro-geomorphic model that accounts for water balance partitioning between surface flow, subsurface flow, and evapotranspiration as landscapes evolve over millions of years. We derive a minimal set of dimensionless numbers that provide insight into how hydrologic and geomorphic parameters together affect landscapes. Across the parameter space we investigated, model results collapsed to a single inverse relationship between the dimensionless relief and the ratio of catchment quickflow to discharge. Furthermore, we found an inverse relationship between the Hillslope number, which describes topographic relief relative to aquifer thickness, and the proportion of the landscape that was variably saturated. While the model generally produces fluvial topography visually similar to simpler landscape evolution models, certain parameter combinations produce wide valley bottom wetlands and non-dendritic, trellis-like drainage networks, which may reflect real conditions in some landscapes where aquifer gradients become decoupled from topography. With these results, we demonstrate the power of hydro-geomorphic models for generating new insights into hydrological processes, and also suggest that subsurface hydrology may be integral for modeling aspects of long-term landscape evolution.

Water Resources Research↗

USGS2020

Depth-dependent soil mixing persists across climate zones

Soil mixing over long (>10 2 y) timescales enhances nutrient fluxes that support soil ecology, contributes to dispersion of sediment and contaminated material, and modulates fluxes of carbon through Earth’s largest terrestrial carbon reservoir. Despite its foundational importance, we lack robust understanding of the rates and patterns of soil mixing, largely due to a lack of long-timescale data. Here we demonstrate that luminescence, a light-sensitive property of minerals used for geologic dating, can be used as a long-timescale sediment tracer in soils to reveal the structure of soil mixing. We develop a probabilistic model of transport and mixing of tracer particles and associated luminescence in soils and compare with a global compilation of luminescence versus depth in various locations. The model–data comparison reveals that soil mixing rate varies over the soil depth, with this depth dependency persisting across climate and ecological zones. The depth dependency is consistent with a model in which mixing intensity decreases linearly or exponentially with depth, although our data do not resolve between these cases. Our findings support the long-suspected idea that depth-dependent mixing is a spatially and temporally persistent feature of soils. Evidence for a climate control on the patterns and intensities of soil mixing with depth remains elusive and requires the further study of soil mixing processes.

PNAS↗

USGS2019

Offset channels may not accurately record strike-slip fault displacement: Evidence from landscape evolution models

Slip distribution, slip rate, and slip per event for strike‐slip faults are commonly determined by correlating offset stream channels—under the assumption that they record seismic slip—but offset channels are formed by the interplay of tectonic and geomorphic processes. To constrain offset channel development under known tectonic and geomorphic conditions, we use numerical landscape evolution simulations along a theoretical strike‐slip fault with uniform and steady uplift, erosion, and diffusion. We investigate the influence of four tectonic parameters (fault zone width, earthquake recurrence interval, variance of the recurrence interval, and total slip relative to channel spacing) on offset channel development through multiple earthquake cycles. Analysis of >3,000 automatically measured offsets from >135 simulations suggests ~30% variability in individual measurements, but modeled displacement is recovered by averaging multiple measurements. However, the average of multiple offset measurements systematically underestimates modeled slip except when the fault zone is less than ~5 m wide, total slip is less than channel spacing, and offsets are measured shortly after an earthquake. In these simulations, postearthquake landscape evolution widens the geomorphic expression of the fault zone and modifies apparent channel offsets. We distinguish this “geomorphic fault zone” from the tectonic fault zone (zone of coseismic distributed deformation). This study highlights the capability of landscape evolution models to explore a range of conditions not easily defined in natural examples and the importance of averaging multiple measurements. Our results verify that paleoseismic studies must consider how geomorphic change has modified offset markers and use caution interpreting slip histories with multiple earthquakes.

Journal of Geophysical Research Solid Earth↗

USGS2019

Luminescence as a sediment tracer and provenance tool

Luminescence holds unique potential as a sediment tracer and provenance method. The tracer application of luminescence has key advantages including ease of measurement, relatively low cost, and applicability to geologically ubiquitous quartz and feldspar sand and silt. These advantages can help answer fundamental questions about geomorphology, sediment transport, sediment production, and the tectonic/climatic controls on source‐to‐sink sedimentary systems. There is a notable body of research on luminescence as a sediment tracer. These tracer methods range from identifying source locations based on unique luminescence characteristics, to observing changes in luminescence characteristics with transport, to using residual luminescence to infer rates of transport. Previous applications of luminescence include provenance and quantification of fluvial transport rate, tracing of coastal longshore drift, estimations of mixing rates in soil or sediment, and provenance of wind‐blown deposits. The few studies that compare luminescence methods with nonluminescence tracer methods show good agreement. However, more work is needed to test the application of luminescence tracers in sediments. Future research directions should focus on comparing luminescence‐based with nonluminescence tracer methods. Furthermore, research is needed on the effects of specific geomorphic processes on luminescence characteristics and residual doses. While there is significant potential for future research, luminescence is already a useful sediment tracer and provenance tool applicable to a wide range of geomorphic environments.

Reviews of Geophysics↗

USGS2019

Topographic change detection at Chalk Cliffs, Colorado, USA, using Airborne LiDAR and UAS-based Structure-from-Motion photogrammetry

The Chalk Cliffs debris-flow site is a small headwater catchment incised into highly fractured and hydrothermally altered quartz monzonite in a semi-arid climate. Over half of the extremely steep basin is exposed bedrock. Debris flows occur multiple times per year in response to rainstorm events, typically during the summer monsoon season. The frequency of debris flows, and the uniformity of the underlying rock, make Chalk Cliffs an ideal study catchment for translating mechanistic understanding of natural debris flows to other sites. A 2008 National Center for Airborne Laser Mapping (NCALM) Airborne LiDAR survey provides baseline topography for the site; however, heretofore there has been no systematic effort to collect repeat topography of the entire site. Starting in May 2018, we made repeat surveys of the basin with an unmanned aircraft system (UAS). The UAS-based imagery was processed into (x, y, z) point clouds using Structure-from-Motion (SfM) photogrammetry. We geo-registered the point clouds using 12 ground control points placed within and around the study basin. In this study we compare the LiDAR with one SfM point cloud to assess topographic change over a 10-year time period. The difference map provides observational data relevant to understanding sediment provenance and transport at the Chalk Cliffs. The difference image indicates erosion of colluvial surfaces, with limited deposition in the survey area. Some colluvial hillslopes show spatially uniform erosion while others experienced concentrated erosion of up to three meters depth over a ten-year period.

Colorado↗

USGS2018

Application of a luminescence‐based sediment transport model

Quantifying the transport history of sand is a challenging but important goal in geomorphology. In this paper, we take a simple idea that luminescence is bleached during transport and regenerates during storage, and use this as a basis to re‐envision luminescence as a sediment tracer. We apply a mathematical model describing luminescence through an idealized channel and reservoir system and then compare this idealized model to real rivers to see if luminescence can reproduce known sediment transport data. We provide results from application of this luminescence method in three rivers from the mid‐Atlantic region of the United States. This method appears promising. However, as a river system diverges from idealized conditions of the mathematical model, the luminescence data diverge from model predictions. We suggest that spatial variation in the delivery of sediment from hillslopes can be reflected in the channel sediment luminescence and that luminescence acts as a function of landscape dynamics.

Geophysical Research Letters↗

USGS2017

On extracting sediment transport information from measurements of luminescence in river sediment

Accurately quantifying sediment transport rates in rivers remains an important goal for geomorphologists, hydraulic engineers, and environmental scientists. However, current techniques for measuring long-time scale (102–106 years) transport rates are laborious, and formulae to predict transport are notoriously inaccurate. Here we attempt to estimate sediment transport rates by using luminescence, a property of common sedimentary minerals that is used by the geoscience community for geochronology. This method is advantageous because of the ease of measurement on ubiquitous quartz and feldspar sand. We develop a model from first principles by using conservation of energy and sediment mass to explain the downstream pattern of luminescence in river channel sediment. We show that the model can accurately reproduce the luminescence observed in previously published field measurements from two rivers with very different sediment transport styles. The model demonstrates that the downstream pattern of river sand luminescence should show exponential-like decay in the headwaters which asymptotes to a constant value with further downstream distance. The parameters from the model can then be used to estimate the time-averaged virtual velocity, characteristic transport lengthscale, storage time scale, and floodplain exchange rate of fine sand-sized sediment in a fluvial system. The sediment transport values predicted from the luminescence method show a broader range than those reported in the literature, but the results are nonetheless encouraging and suggest that luminescence demonstrates potential as a sediment transport indicator. However, caution is warranted when applying the model as the complex nature of sediment transport can sometimes invalidate underlying simplifications.

Journal of Geophysical Research F: Earth Surface↗

USGS2016

Observed and simulated hydrologic response for a first-order catchment during extreme rainfall 3 years after wildfire disturbance

Hydrologic response to extreme rainfall in disturbed landscapes is poorly understood because of the paucity of measurements. A unique opportunity presented itself when extreme rainfall in September 2013 fell on a headwater catchment (i.e., <1 ha) in Colorado, USA that had previously been burned by a wildfire in 2010. We compared measurements of soil-hydraulic properties, soil saturation from subsurface sensors, and estimated peak runoff during the extreme rainfall with numerical simulations of runoff generation and subsurface hydrologic response during this event. The simulations were used to explore differences in runoff generation between the wildfire-affected headwater catchment, a simulated unburned case, and for uniform versus spatially variable parameterizations of soil-hydraulic properties that affect infiltration and runoff generation in burned landscapes. Despite 3 years of elapsed time since the 2010 wildfire, observations and simulations pointed to substantial surface runoff generation in the wildfire-affected headwater catchment by the infiltration-excess mechanism while no surface runoff was generated in the unburned case. The surface runoff generation was the result of incomplete recovery of soil-hydraulic properties in the burned area, suggesting recovery takes longer than 3 years. Moreover, spatially variable soil-hydraulic property parameterizations produced longer duration but lower peak-flow infiltration-excess runoff, compared to uniform parameterization, which may have important hillslope sediment export and geomorphologic implications during long duration, extreme rainfall. The majority of the simulated surface runoff in the spatially variable cases came from connected near-channel contributing areas, which was a substantially smaller contributing area than the uniform simulations.

Water Resources Research↗

USGS2015

Aspect-dependent soil saturation and insight into debris-flow initiation during extreme rainfall in the Colorado Front Range

Hydrologic processes during extreme rainfall events are poorly characterized because of the rarity of measurements. Improved understanding of hydrologic controls on natural hazards is needed because of the potential for substantial risk during extreme precipitation events. We present field measurements of the degree of soil saturation and estimates of available soil-water storage during the September 2013 Colorado extreme rainfall event at burned (wildfire in 2010) and unburned hillslopes with north- and south-facing slope aspects. Soil saturation was more strongly correlated with slope aspect than with recent fire history; south-facing hillslopes became fully saturated while north-facing hillslopes did not. Our results suggest multiple explanations for why aspect-dependent hydrologic controls favor saturation development on south-facing slopes, causing reductions in effective stress and triggering of slope failures during extreme rainfall. Aspect-dependent hydrologic behavior may result from (1) a larger gravel and stone fraction, and hence lower soil-water storage capacity, on south-facing slopes, and (2) lower weathered-bedrock permeability on south-facing slopes, because of lower tree density and associated deep roots penetrating bedrock as well as less intense weathering, inhibiting soil drainage.

Geology↗

USGS2014

Effects of woody vegetation on overbank sand transport during a large flood, Rio Puerco, New Mexico

Distributions of woody vegetation on floodplain surfaces affect flood-flow erosion and deposition processes. A large flood along the lower Rio Puerco, New Mexico, in August 2006 caused extensive erosion in a reach that had been sprayed with herbicide in September 2003 for the purpose of saltcedar ( Tamarix spp.) control. Large volumes of sediment, including a substantial fraction of sand, were delivered to the reach downstream, which had not been treated with herbicide. We applied physically based, one-dimensional models of flow and suspended-sediment transport to compute volume concentrations of sand in suspension in floodplain flow at a site within the sprayed reach and at a site downstream from the sprayed reach. We computed the effects of drag on woody stems in reducing the skin friction shear stress, velocity of flow, and suspended-sand transport from open paths into patches of dense stems. Total flow and suspended-sand fluxes were computed for each site using well-constrained flood-flow depths, water-surface slopes, and measured shrub characteristics. Results show that flow in open paths carried high concentrations of sand in suspension with nearly uniform vertical distributions. Drag on woody floodplain stems reduced skin friction shear stresses by two orders of magnitude, yet sufficient velocities were maintained to transport sand more than 50 m into fields of dense, free-surface-penetrating stems. An increase in shrub canopy extent from 31% in the sprayed reach site to 49% in the downstream site was found to account for 69% of the computed decrease in discharge between the two sites. The results demonstrate the need to compute the spatial distribution of skin friction shear stress in order to effectively compute suspended-sand transport and to predict the fate of sediment and contaminants carried in suspension during large floods.

New Mexico↗

USGS2013

Runoff-generated debris flows: observations and modeling of surge initiation, magnitude, and frequency

Runoff during intense rainstorms plays a major role in generating debris flows in many alpine areas and burned steeplands. Yet compared to debris flow initiation from shallow landslides, the mechanics by which runoff generates a debris flow are less understood. To better understand debris flow initiation by surface water runoff, we monitored flow stage and rainfall associated with debris flows in the headwaters of two small catchments: a bedrock-dominated alpine basin in central Colorado (0.06 km 2 ) and a recently burned area in southern California (0.01 km 2 ). We also obtained video footage of debris flow initiation and flow dynamics from three cameras at the Colorado site. Stage observations at both sites display distinct patterns in debris flow surge characteristics relative to rainfall intensity (I). We observe small, quasiperiodic surges at low I; large, quasiperiodic surges at intermediate I; and a single large surge followed by small-amplitude fluctuations about a more steady high flow at high I. Video observations of surge formation lead us to the hypothesis that these flow patterns are controlled by upstream variations in channel slope, in which low-gradient sections act as “sediment capacitors,” temporarily storing incoming bed load transported by water flow and periodically releasing the accumulated sediment as a debris flow surge. To explore this hypothesis, we develop a simple one-dimensional morphodynamic model of a sediment capacitor that consists of a system of coupled equations for water flow, bed load transport, slope stability, and mass flow. This model reproduces the essential patterns in surge magnitude and frequency with rainfall intensity observed at the two field sites and provides a new framework for predicting the runoff threshold for debris flow initiation in a burned or alpine setting.

California;Colorado↗

USGS2013

The storage time, age, and erosion hazard of laterally accreted sediment on the floodplain of a simulated meandering river

A sediment particle traversing the fluvial system may spend the majority of the total transit time at rest, stored in various sedimentary deposits. Floodplains are among the most important of these deposits, with the potential to store large amounts of sediment for long periods of time. The virtual velocity of a sediment grain depends strongly on the amount of time spent in storage, but little is known about sediment storage times. Measurements of floodplain vegetation age have suggested that storage times are exponentially distributed, a case that arises when all the sediment on a floodplain is equally vulnerable to erosion in a given interval. This assumption has been incorporated into sediment routing models, despite some evidence that younger sediment is more likely to be eroded from floodplains than older sediment. We investigate the relationship between sediment age and erosion, which we term the “erosion hazard,” with a model of a meandering river that constructs its floodplain by lateral accretion. We find that the erosion hazard decreases with sediment age, leading to a storage time distribution that is not exponential. We propose an alternate model that requires that channel motion is approximately diffusive and results in a heavy tailed distribution of storage time. The model applies to timescales over which the direction of channel motion is uncorrelated. We speculate that the lower end of this range of time is set by the meander cutoff timescale and the upper end is set by processes that limit the width of the meander belt.

Journal of Geophysical Research F: Earth Surface↗

USGS2003

Importance of a stochastic distribution of floods and erosion thresholds in the bedrock river incision problem

Fluvial erosion of bedrock occurs during occasional flood events when boundary shear stress exceeds a critical threshold to initiate incision. Therefore efforts to model the evolution of topography over long timescales should include an erosion threshold and should be driven by a stochastic distribution of erosive events. However, most bedrock incision models ignore the threshold as a second‐order detail. In addition, climate is poorly represented in most landscape evolution models, so the quantitative relationship between erosion rate and measurable climatic variables has been elusive. Here we show that the presence of an erosion threshold, when combined with a well‐constrained, probabilistic model of storm and flood occurrence, has first‐order implications for the dynamics of river incision in tectonically active areas. First, we make a direct calculation of the critical shear stress required to pluck bedrock blocks for a field site in New York. Second, we apply a recently proposed stochastic, threshold, bedrock incision model to a series of streams in California, with known tectonic and climatic forcing. Previous work in the area has identified a weak relationship between channel gradient or relief and rock uplift rate that is not easily explained by simpler detachment‐limited models. The results with the stochastic threshold model show that even low erosion thresholds, which are exceeded in steep channels during high‐frequency flood events, fundamentally affect the predicted relationship between gradient and uplift rate in steady state rivers, in a manner consistent with the observed topography. This correspondence between theory and data is, however, nonunique; models in which a thin alluvial cover may act to inhibit channel incision in the low uplift rate zone also provide plausible explanations for the observed topography. Third, we explore the broader implications of the stochastic threshold model to the development of fluvial topography in active tectonic settings. We suggest that continued field applications of geomorphic models, including physically meaningful thresholds and stochastic climate distributions, are required to advance our knowledge of interactions among surficial, climatic, and crustal processes.

California↗

USGS2003

Channel response to tectonic forcing: field analysis of stream morphology and hydrology in the Mendocino triple junction region, northern California

An empirical calibration of the shear stress model for bedrock incision is presented, using field and hydrologic data from a series of small, coastal drainage basins near the Mendocino triple junction in northern California. Previous work comparing basins from the high uplift zone (HUZ, uplift rates around 4 mm/year) to ones in the low uplift zone (LUZ, ∼0.5 mm/year) indicates that the HUZ channels are about twice as steep for a given drainage area. This observation suggests that incision processes are more effective in the HUZ. It motivates a detailed field study of channel morphology in the differing tectonic settings to test whether various factors that are hypothesized to influence incision rates (discharge, channel width, lithology, sediment load) change in response to uplift or otherwise differ between the HUZ and LUZ. Analysis of regional stream gaging data for mean annual discharge and individual floods yields a linear relationship between discharge and drainage area. Increased orographic precipitation in the HUZ accounts for about a twofold increase in discharge in this area, corresponding to an assumed increase in the erosional efficiency of the streams. Field measurements of channel width indicate a power-law relationship between width and drainage area with an exponent of ∼0.4 and no significant change in width between the uplift rate zones, although interpretation is hampered by a difference in land use between the zones. The HUZ channel width dataset reveals a scaling break interpreted to be the transition between colluvial- and fluvial-dominated incision processes. Assessments of lithologic resistance using a Schmidt hammer and joint surveys show that the rocks of the study area should be fairly similar in their susceptibility to erosion. The HUZ channels generally have more exposed bedrock than those in the LUZ, which is consistent with protection by sediment cover inhibiting incision in the LUZ. However, this difference is likely the result of a recent pulse of sediment due to land use in the LUZ. Therefore, the role of sediment flux in setting incision rates cannot be constrained with any certainty. To summarize, of the four response mechanisms analyzed, the only factor that demonstrably varies between uplift rate zones is discharge, although this change is likely insufficient to explain the relationship between channel slope and uplift rate. The calibrated model allows us to make a prediction of channel concavity that is consistent with a previous estimate from slope–drainage area data. We show that the inclusion of nonzero values of critical shear stress in the model has important implications for the theoretical relationship between steady-state slope and uplift rate and might provide an explanation for the observations. This analysis underscores the importance of further work to constrain quantitatively threshold shear stress for bedrock incision.

California↗