Shuttle imaging radar: Physical controls on signal penetration and subsurface scattenng in the Eastern Sahara
SIR-A signal penetration and subsurface backscatter within the upper meter or so of the sediment blanket in the Eastern Sahara of southern Egypt and northern Sudan are enhanced both by radar sensor parameters and by the physical and chemical characteristics of eolian and alluvial materials. Interpretation of SIR-A images by McCauley et al. [1], [2] dramatically changed previous concepts of the role that fluvial processes have played over the past 10000 to 30000000 years in shaping this now extremely flat, featureless, and hyperarid landscape. In the present paper we summarize the near-surface stratigraphy, the electrical properties of materials, and the types of radar interfaces found to be responsible for different classes of SIR-A tonal response. The dominant factors related to efficient microwave signal penetration into the sediment blanket include a) favorable distribution of particle sizes, b) extremely low moisture content and c) reduced geometric scattering at the SIR-A frequency (1.3 GHz). The depth of signal penetration that results in a recorded backscatter, here called "radar imaging depth," was documented in the field to be a maximum of 1.5 m, or 0.25 of the calculated "skin depth," for the sediment blanket. Radar imaging depth is estimated to be between 2 and 3 m for active sand dune materials. Diverse permittivity interfaces and volume scatterers within the shallow subsurface are responsible for most of the observed backscatter not directly attributable to grazing outcrops.