Search USGS⌕ Search

Geology topics

G. W. Moore

Publications and source records attributed to G. W. Moore.

At least 19 recordsLinked to original sources
USGS2020

Tidal wetland gross primary production across the continental United States, 2000–2019

We mapped tidal wetland gross primary production (GPP) with unprecedented detail for multiple wetland types across the continental United States (CONUS) at 16‐day intervals for the years 2000–2019. To accomplish this task, we developed the spatially explicit Blue Carbon (BC) model, which combined tidal wetland cover and field‐based eddy covariance tower data into a single Bayesian framework, and used a super computer network and remote sensing imagery (Moderate Resolution Imaging Spectroradiometer Enhanced Vegetation Index). We found a strong fit between the BC model and eddy covariance data from 10 different towers ( r 2 = 0.83, p < 0.001, root‐mean‐square error = 1.22 g C/m 2 /day, average error was 7% with a mean bias of nearly zero). When compared with NASA's MOD17 GPP product, which uses a generalized terrestrial algorithm, the BC model reduced error by approximately half (MOD17 had r 2 = 0.45, p < 0.001, root‐mean‐square error of 3.38 g C/m 2 /day, average error of 15%). The BC model also included mixed pixels in areas not covered by MOD17, which comprised approximately 16.8% of CONUS tidal wetland GPP. Results showed that across CONUS between 2000 and 2019, the average daily GPP per m 2 was 4.32 ± 2.45 g C/m 2 /day. The total annual GPP for the CONUS was 39.65 ± 0.89 Tg C/year. GPP for the Gulf Coast was nearly double that of the Atlantic and Pacific Coasts combined. Louisiana alone accounted for 15.78 ± 0.75 Tg C/year, with its Atchafalaya/Vermillion Bay basin at 4.72 ± 0.14 Tg C/year. The BC model provides a robust platform for integrating data from disparate sources and exploring regional trends in GPP across tidal wetlands.

Global Biogeochemical Cycles↗
USGS2013

Tectonic map of the Circum-Pacific region, Pacific basin sheet

Circum-Pacific Map Project : The Circum-Pacific Map Project was a cooperative international effort designed to show the relationship of known energy and mineral resources to the major geologic features of the Pacific basin and surrounding continental areas. Available geologic, mineral, and energy-resource data are being complemented by new, project-developed data sets such as magnetic lineations, seafloor mineral deposits, and seafloor sediment. Earth scientists representing some 180 organizations from more than 40 Pacific-region countries are involved in this work. Six overlapping equal-area regional maps at a scale of 1:10,000,000 form the cartographic base for the project: the four Circum-Pacific Quadrants (Northwest, Southwest, Southeast, and Northeast), and the Antarctic and Arctic Sheets. There is also a Pacific Basin Sheet at a scale of 1:17,000,000. The Base Map Series and the Geographic Series (published from 1977 to 1990), the Plate-Tectonic Series (published in 1981 and 1982), the Geodynamic Series (published in 1984 and 1985), and the Geologic Series (published from 1984 to 1989) all include six map sheets. Other thematic map series in preparation include Mineral-Resources, Energy-Resources and Tectonic Maps. Altogether, more than 50 map sheets are planned. The maps were prepared cooperatively by the Circum-Pacific Council for Energy and Mineral Resources and the U.S. Geological Survey and are available from the Branch of Distribution, U. S. Geological Survey, Box 25286, Federal Center, Denver, Colorado 80225, U.S.A. The Circum-Pacific Map Project is organized under six panels of geoscientists representing national earth-science organizations, universities, and natural-resource companies. The six panels correspond to the basic map areas. Current panel chairmen are Tomoyuki Moritani (Northwest Quadrant), R. Wally Johnson (Southwest Quadrant), Ian W.D. Dalziel (Antarctic Region), vacant. (Southeast Quadrant), Kenneth J. Drummond (Northeast Quadrant), and George W. Moore (Arctic Region). Project coordination and final cartography was being carried out through the cooperation of the Office of the Chief Geologist of the U.S. Geological Survey, under the direction of General Chairman, George Gryc of Menlo Park, California. Project headquarters were located at 345 Middlefield Road, MS 952, Menlo Park, California 94025, U.S.A. The framework for the Circum-Pacific Map Project was developed in 1973 by a specially convened group of 12 North American geoscientists meeting in California. The project was officially launched at the First Circum-Pacific Conference on Energy and Mineral Resources, which met in Honolulu, Hawaii, in August 1974. Sponsors of the conference were the AAPG, Pacific Science Association (PSA), and the Coordinating Committee for Offshore Prospecting for Mineral Resources in Offshore Asian Areas (CCOP). The Circum-Pacific Map Project operates as an activity of the Circum-Pacific Council for Energy and Mineral Resources, a nonprofit organization that promotes cooperation among Circum-Pacific countries in the study of energy and mineral resources of the Pacific basin. Founded by Michel T. Halbouty in 1972, the Council also sponsors conferences, topical symposia, workshops and the Earth Science Series books. Tectonic Map Series : The tectonic maps distinguish areas of oceanic and continental crust. Symbols in red mark active plate boundaries, and colored patterns show tectonic units (volcanic or magmatic arcs, arc-trench gaps, and interarc basins) associated with active plate margins. Well-documented inactive plate boundaries are shown by symbols in black. The tectonic development of oceanic crust is shown by episodes of seafloor spreading. These correlate with the rift and drift sequences at passive continental margins and episodes of tectonic activity at active plate margins. The recognized episodes of seafloor spreading seem to reflect major changes in plate kinematics. Oceanic plateaus and other prominences of greater than normal oceanic crustal thickness such as hotspot traces are also shown. Colored areas on the continents show the ages of deformation and metamorphism of basement rocks and the emplacement of igneous rocks. Transitional tectonic (molassic) and reactivation basins are shown by a colored boundary, and if they are deformed, a colored horizontal line pattern indicates the age of deformation. Colored bands along basin boundaries indicate age of inception, and isopachs indicate thickness of platform strata on continental crust and cover on oceanic crust. Colored patterns at separated continental margins show the age of inception of rift and drift (breakup) sequences. Symbols mark folds and faults, and special symbols show volcanoes and other structural features. Affiliations are as of compilation of the data. This map was created in quadrants and then compiled together. They are the Northwest land, Northwest Marine (different compilers), Northeast, Southwest and Southeast, and parts in plate-boundary sections.

Circum-Pacific Map↗
USGS2011

Potential for water salvage by removal of non-native woody vegetation from dryland river systems

Globally, expansion of non-native woody vegetation across floodplains has raised concern of increased evapotranspiration (ET) water loss with consequent reduced river flows and groundwater supplies. Water salvage programs, established to meet water supply demands by removing introduced species, show little documented evidence of program effectiveness. We use two case studies in the USA and Australia to illustrate factors that contribute to water salvage feasibility for a given ecological setting. In the USA, saltcedar (Tamarix spp.) has become widespread on western rivers, with water salvage programs attempted over a 50-year period. Some studies document riparian transpiration or ET reduction after saltcedar removal, but detectable increases in river base flow are not conclusively shown. Furthermore, measurements of riparian vegetation ET in natural settings show saltcedar ET overlaps the range measured for native riparian species, thereby constraining the possibility of water salvage by replacing saltcedar with native vegetation. In Australia, introduced willows (Salix spp.) have become widespread in riparian systems in the Murray-Darling Basin. Although large-scale removal projects have been undertaken, no attempts have been made to quantify increases in base flows. Recent studies of ET indicate that willows growing in permanently inundated stream beds have high transpiration rates, indicating water savings could be achieved from removal. In contrast, native Eucalyptus trees and willows growing on stream banks show similar ET rates with no net water salvage from replacing willows with native trees. We conclude that water salvage feasibility is highly dependent on the ecohydrological setting in which the non-native trees occur. We provide an overview of conditions favorable to water salvage. Copyright ?? 2011 John Wiley & Sons, Ltd.

Hydrological Processes↗
USGS1988

Large-scale bedforms in boulder gravel produced by giant waves in Hawaii

Approximately 105,000 yr ago (based on uranium-series dating), waves in a giant wave train swept up to an elevation of about 375 m on the island of Lanai. The waves deposited the Hulopoe Gravel, which near the present shoreline consists of basalt boulders, coral fragments, and calcareous beachrock slabs, and near the upper limit of the deposit consists of sand and shell fragments. The maximum heights of similar but lower deposits on nearby islands, when adjusted for their estimated subsidence due to volcanic loading during the past 105,000 yr, indicate that the source of the wave was about 50 km southwest of Lanai. We hypothesize that failure and downward movement of the huge Lanai submarine landslide created an ocean disturbance, which produced waves that rushed across the Lanai reef and beach, picked up limestone and lava fragments, and deposited them high on the island as the Hulopoe Gravel. Backwash from the waves stripped soil and rock from the islands and carried much of it to the sea. The Hulopoe Gravel is 8 m thick in a gulch 200 m inland from the Lanai shoreline, where it consists of three beds, successively, 2, 4, and 2 m thick. These beds are considered to have been laid down by successive waves in the wave train. Each bed consists of two units: a lower unit of basalt and limestone boulders, cobbles, and sand, and an upper bimodal unit of large basalt boulders with a pebbly sand matrix. These subunits are inferred to be deposited from the runup and backwash of each wave. At the upper surface of the Hulopoe Gravel, basalt boulders averaging 0.5 m in diameter are arranged in dunelike ridges about 1 m high and 10 m apart. Nearby, where young streams have cut into and exposed the lower beds of the Hulopoe, clasts at the boundaries between the beds are locally imbricated and dip landward. We interpret these features as aspects of torrential flow and crossbedding created during the high-speed backwash of the great waves.

Hawaii↗
USGS1980

Biostratigraphic results of dart-coring in the western Gulf of Alaska, and their tectonic implications

Age determinations are reported for microfossils from 56 dart-cores collected in 1978 from the Kodiak shelf. The ages suggest that rocks cropping out along Albatross Bank, at the shelf edge, are as old as middle or late Miocene, and that the anticline forming Albatross Bank, previously defined with multi- and single-channel seismic records, plunges northeastward in the sampled area. Foraminiferal paleobathymetry further suggests that m.ajor tectonic activity has occurred on the Kodiak shelf since the early or middle Pliocene, including two episodes of vertical movement--first subsidence on the order of 2000 m, then uplift of at least 3000 m. Microfossil ages and paleobathymetric determinations indicate an average uplift rate of 1000- 3000 m/m.y. for the seaward edge of the Kodiak shelf during the Quaternary.

Alaska↗
USGS1974

Preliminary report on the geology of the continental borderland of Southern California

Appraisal of the mineral resource potential and assessment of environmental problems of any specific area require an understanding of the regional geology. The geology of t he coastal zone and offshore islands from Point Conception to the Mexican boundary serves as a frame of reference from which rock units and structures can be extrapolated into submerged parts of the borderland (sheet 1). Such extrapolations should be used with caution, for the tectonic evolution and depositional history of parts of the borderland may not have paralleled those of the mainland. On shore, rocks and structures c an be observed directly with supplemental aid from deep drill holes; but in areas covered by deep water, only indirect techniques such as geophysical methods and shallow coring provide information from which geologic intepretations can be made.

California↗
USGS1972

Crust and mantle of the Gulf of Mexico

A SEEMING paradox has puzzled investigators of the crustal structure of the Gulf of Mexico since Ewing et al. 1 calculated that a unit area of the rather thick crust in the gulf contains less mass than does a combination of the crust and enough of the upper mantle to make a comparable thickness in the Atlantic Ocean. They also noted that the free-air gravity of the gulf is essentially normal and fails by a large factor to be low enough to reflect the mass difference that they calculated. We propose a solution to this problem.

Gulf of Mexico↗