Search USGS⌕ Search

Geology topics

Frederick D. Day-Lewis

Publications and source records attributed to Frederick D. Day-Lewis.

At least 55 records · Page 3Linked to original sources
USGS2009

Marine electrical resistivity imaging of submarine groundwater discharge: Sensitivity analysis and application in Waquoit Bay, Massachusetts, USA

Electrical resistivity imaging has been used in coastal settings to characterize fresh submarine groundwater discharge and the position of the freshwater/salt-water interface because of the relation of bulk electrical conductivity to pore-fluid conductivity, which in turn is a function of salinity. Interpretation of tomograms for hydrologic processes is complicated by inversion artifacts, uncertainty associated with survey geometry limitations, measurement errors, and choice of regularization method. Variation of seawater over tidal cycles poses unique challenges for inversion. The capabilities and limitations of resistivity imaging are presented for characterizing the distribution of freshwater and saltwater beneath a beach. The experimental results provide new insight into fresh submarine groundwater discharge at Waquoit Bay National Estuarine Research Reserve, East Falmouth, Massachusetts (USA). Tomograms from the experimental data indicate that fresh submarine groundwater discharge may shut down at high tide, whereas temperature data indicate that the discharge continues throughout the tidal cycle. Sensitivity analysis and synthetic modeling provide insight into resolving power in the presence of a time-varying saline water layer. In general, vertical electrodes and cross-hole measurements improve the inversion results regardless of the tidal level, whereas the resolution of surface arrays is more sensitive to time-varying saline water layer.

Massachusetts↗
USGS2009

Geoelectrical measurement and modeling of biogeochemical breakthrough behavior during microbial activity

We recorded bulk electrical conductivity ( σ b ) along a soil column during microbially-mediated selenite oxyanion reduction. Effluent fluid electrical conductivity and early time σ b were modeled according to classic advective-dispersive transport of the nutrient medium. However, σ b along the column exhibited strongly bimodal breakthrough which cannot be explained by changes in the electrical conductivity of the pore fluid. We model the anomalous breakthrough by adding a conduction path in parallel with the fluid phase, with a time dependence described by a microbial population-dynamics model. We incorporate a delay time to show that breakthrough curves along the column satisfy the same growth model parameters and offer a possible explanation based on biomass-limited growth that is delayed with distance from influent of the nutrient medium. Although the mechanism causing conductivity enhancement in the presence of biomass is uncertain, our results strongly suggest that biogeochemical breakthrough curves have been captured in geoelectrical datasets.

Geophysical Research Letters↗
USGS2009

Investigation of aquifer-estuary interaction using wavelet analysis of fiber-optic temperature data

Fiber-optic distributed temperature sensing (FODTS) provides sub-minute temporal and meter-scale spatial resolution over kilometer-long cables. Compared to conventional thermistor or thermocouple-based technologies, which measure temperature at discrete (and commonly sparse) locations, FODTS offers nearly continuous spatial coverage, thus providing hydrologic information at spatiotemporal scales previously impossible. Large and information-rich FODTS datasets, however, pose challenges for data exploration and analysis. To date, FODTS analyses have focused on time-series variance as the means to discriminate between hydrologic phenomena. Here, we demonstrate the continuous wavelet transform (CWT) and cross-wavelet transform (XWT) to analyze FODTS in the context of related hydrologic time series. We apply the CWT and XWT to data from Waquoit Bay, Massachusetts to identify the location and timing of tidal pumping of submarine groundwater.

Geophysical Research Letters↗
USGS2008

Electrical characterization of non‐Fickian transport in groundwater and hyporheic systems

Recent work indicates that processes controlling solute mass transfer between mobile and less mobile domains in porous media may be quantified by combining electrical geophysical methods and electrically conductive tracers. Whereas direct geochemical measurements of solute preferentially sample the mobile domain, electrical geophysical methods are sensitive to changes in bulk electrical conductivity (bulk EC) and therefore sample EC in both the mobile and immobile domains. Consequently, the conductivity difference between direct geochemical samples and remotely sensed electrical geophysical measurements may provide an indication of mass transfer rates and mobile and immobile porosities in situ. Here we present (1) an overview of a theoretical framework for determining parameters controlling mass transfer with electrical resistivity in situ; (2) a review of a case study estimating mass transfer processes in a pilot‐scale aquifer storage recovery test; and (3) an example application of this method for estimating mass transfer in watershed settings between streams and the hyporheic corridor. We demonstrate that numerical simulations of electrical resistivity studies of the stream/hyporheic boundary can help constrain volumes and rates of mobile‐immobile mass transfer. We conclude with directions for future research applying electrical geophysics to understand field‐scale transport in aquifer and fluvial systems subject to rate‐limited mass transfer.

Water Resources Research↗
USGS2008

Fiber‐optic distributed temperature sensing: A new tool for assessment and monitoring of hydrologic processes

Fiber‐optic distributed temperature sensing (FO DTS) is an emerging technology for characterizing and monitoring a wide range of important earth processes. FO DTS utilizes laser light to measure temperature along the entire length of standard telecommunications optical fibers. The technology can measure temperature every meter over FO cables up to 30 kilometers (km) long. Commercially available systems can measure fiber temperature as often as 4 times per minute, with thermal precision ranging from 0.1 to 0.01 °C depending on measurement integration time. In 2006, the U.S. Geological Survey initiated a project to demonstrate and evaluate DTS as a technology to support hydrologic studies. This paper demonstrates the potential of the technology to assess and monitor hydrologic processes through case‐study examples of FO DTS monitoring of stream‐aquifer interaction on the Shenandoah River near Locke's Mill, Virginia, and on Fish Creek, near Jackson Hole, Wyoming, and estuary‐aquifer interaction on Waquoit Bay, Falmouth, Massachusetts. The ability to continuously observe temperature over large spatial scales with high spatial and temporal resolution provides a new opportunity to observe and monitor a wide range of hydrologic processes with application to other disciplines including hazards, climate‐change, and ecosystem monitoring.

Conference Paper↗
USGS2008

Implications of rate-limited mass transfer for aquifer storage and recovery

Pressure to decrease reliance on surface water storage has led to increased interest in aquifer storage and recovery (ASR) systems. Recovery efficiency, which is the ratio of the volume of recovered water that meets a predefined standard to total volume of injected fluid, is a common criterion of ASR viability. Recovery efficiency can be degraded by a number of physical and geochemical processes, including rate-limited mass transfer (RLMT), which describes the exchange of solutes between mobile and immobile pore fluids. RLMT may control transport behavior that cannot be explained by advection and dispersion. We present data from a pilot-scale ASR study in Charleston, South Carolina, and develop a three-dimensional finite-difference model to evaluate the impact of RLMT processes on ASR efficiency. The modeling shows that RLMT can explain a rebound in salinity during fresh water storage in a brackish aquifer. Multicycle model results show low efficiencies over one to three ASR cycles due to RLMT degrading water quality during storage; efficiencies can evolve and improve markedly, however, over multiple cycles, even exceeding efficiencies generated by advection-dispersion only models. For an idealized ASR model where RLMT is active, our simulations show a discrete range of diffusive length scales over which the viability of ASR schemes in brackish aquifers would be hindered.

Groundwater↗
USGS2008

Geoelectrical inference of mass transfer parameters using temporal moments

We present an approach to infer mass transfer parameters based on (1) an analytical model that relates the temporal moments of mobile and bulk concentration and (2) a bicontinuum modification to Archie's law. Whereas conventional geochemical measurements preferentially sample from the mobile domain, electrical resistivity tomography (ERT) is sensitive to bulk electrical conductivity and, thus, electrolytic solute in both the mobile and immobile domains. We demonstrate the new approach, in which temporal moments of collocated mobile domain conductivity (i.e., conventional sampling) and ERT‐estimated bulk conductivity are used to calculate heterogeneous mass transfer rate and immobile porosity fractions in a series of numerical column experiments.

Water Resources Research↗
USGS2007

Moment inference from tomograms

Time-lapse geophysical tomography can provide valuable qualitative insights into hydrologic transport phenomena associated with aquifer dynamics, tracer experiments, and engineered remediation. Increasingly, tomograms are used to infer the spatial and/or temporal moments of solute plumes; these moments provide quantitative information about transport processes (e.g., advection, dispersion, and rate-limited mass transfer) and controlling parameters (e.g., permeability, dispersivity, and rate coefficients). The reliability of moments calculated from tomograms is, however, poorly understood because classic approaches to image appraisal (e.g., the model resolution matrix) are not directly applicable to moment inference. Here, we present a semi-analytical approach to construct a moment resolution matrix based on (1) the classic model resolution matrix and (2) image reconstruction from orthogonal moments. Numerical results for radar and electrical-resistivity imaging of solute plumes demonstrate that moment values calculated from tomograms depend strongly on plume location within the tomogram, survey geometry, regularization criteria, and measurement error.

Geophysical Research Letters↗
USGS2007

Geoelectrical evidence of bicontinuum transport in groundwater

Bicontinuum models and rate-limited mass transfer (RLMT) explain complex transport behavior (e.g., long tailing and rebound) in heterogeneous geologic media, but experimental verification is problematic because geochemical samples represent the mobile component of the pore space. Here, we present geophysical evidence of RLMT at the field scale during an aquifer-storage and recovery experiment in a fractured limestone aquifer in Charleston, South Carolina. We observe a hysteretic relation between measurements of porefluid conductivity and bulk electrical conductivity; this hysteresis contradicts advective-dispersive transport and the standard petrophysical model relating pore-fluid and bulk conductivity, but can be explained by considering bicontinuum transport models that include first-order RLMT. Using a simple numerical model, we demonstrate that geoelectrical measurements are sensitive to bicontinuum transport and RLMT parameters, which are otherwise difficult to infer from direct, hydrologic measurements.

South Carolina↗
USGS2007

Monitoring engineered remediation with borehole radar

The success of engineered remediation is predicated on correct emplacement of either amendments (e.g., vegetable-oil emulsion, lactate, molasses, etc.) or permeable reactive barriers (e.g., vegetable oil, zero-valent iron, etc.) to enhance microbial or geochemical breakdown of contaminants and treat contaminants. Currently, site managers have limited tools to provide information about the distribution of injected materials; the existence of gaps or holes in barriers; and breakdown or transformation of injected materials over time.

The Leading Edge↗
USGS2007

Borehole geophysical monitoring of amendment emplacement and geochemical changes during vegetable oil biostimulation, Anoka County Riverfront Park, Fridley, Minnesota

The U.S. Geological Survey ( USGS ) conducted a series of geophysical investigations to monitor a field-scale biostimulation pilot project at the Anoka County Riverfront Park ( ACP ), downgradient from the Naval Industrial Reserve Ordnance Plant, in Fridley, Minnesota. The pilot project was undertaken by the U.S. Naval Facilities Engineering Command, Southern Division, for the purpose of evaluating biostimulation using emulsified vegetable oil to treat ground water contaminated with chlorinated hydrocarbons. Vegetable oil was introduced to the subsurface to serve as substrate for naturally occurring microbes, which ultimately break down chlorinated hydrocarbons into chloride, carbon dioxide, and water through oxidation-reduction reactions. In support of this effort, the USGS collected cross-borehole radar data and conventional borehole geophysical data in five site visits over 1.5 years to evaluate the effectiveness of geophysical methods for monitoring emplacement of the vegetable oil emulsion and for tracking changes in water chemistry. Radar zero-offset profile ( ZOP ) data, radar traveltime tomograms, electromagnetic ( EM ) induction logs, natural gamma logs, neutron porosity logs, and magnetic susceptibility logs were collected and analyzed. In order to facilitate data interpretation and to test the effectiveness of radar for monitoring oil-emulsion placement and movement, three injection mixtures with different radar signatures were used: (1) vegetable oil emulsion, (2) vegetable oil emulsion with a colloidal iron tracer, and (3) vegetable oil emulsion with a magnetite tracer. Based on petrophysical modeling, mixture (1) was expected to increase radar velocity and decrease radar attenuation relative to background—a water-saturated porous medium; mixtures (2) and (3) were expected to increase radar velocity and increase radar attenuation because of their greater electrical conductivity compared to background ground water. Radar ZOP data and tomograms show increased EM velocity in the vicinity of injection wells. Comparison of pre- and post-injection datasets shows that velocity anomalies are observed only in planes connected to injection wells, indicating that the emulsified vegetable oil does not migrate far after injection. In contrast to the localization of velocity anomalies, radar attenuation anomalies are observed in all zero-offset profiles, particularly those downgradient from the injection wells. Despite the expected signatures of different tracers, increases in attenuation are observed downgradient from all three injection wells; thus, we infer that the attenuation changes do not result from the iron tracers alone. Over the period of data collection, the slowness (reciprocal velocity) anomalies are relatively stable, whereas the attenuation anomalies generally increase in magnitude and extent. One explanation for the attenuation changes is that products of vegetable oil-enhanced biodegradation (for example, chloride) increase the specific conductance of ground water and thus bulk electrical conductivity and radar attenuation. This interpretation is supported by the results of EM-induction and magnetic susceptibility logs, which indicate increases in electrical conductivity in the absence of magnetic anomalies that might result from the iron and magnetite. Based on the geophysical data, conceptual models of the distributions of emulsified vegetable oil and ground water with altered chemistry were developed. The field data indicate that, in several cases, the plume of ground water with altered chemistry would not be detected by direct chemical sampling given the construction of monitoring wells; hence the geophysical data provide valuable site-specific insights for the interpretation of water samples and monitoring of biostimulation projects. Application of geophysical methods to data from the ACP demonstrated the utility of radar for monitoring biostimulation injections.

Minnesota↗
USGS2006

Solute transport processes

Soils and aquifers are major compartments of the subsurface environment, which together control the terrestrial hydrological cycle. This subsurface is important for water resources and also as repository for municipal, industrial, and government waste. Aquifers are typically recharged by natural rainfall entering the soil profile and leaching into deeper soil layers. Due to intensive agricultural or industrial activities the leachate leaving the soil profile and entering the aquifer may contain concentrations of toxic substances such as agrochemicals, heavy metals, and polycyclic aromatic hydrocarbons. At contaminated industrial sites light and dense non-aqueous phase liquids (LNAPLs, DNAPLs) may be transported as a separate phase to the underlying aquifer systems. Once any of these chemicals have entered the aquifer they can be transported over large horizontal distances thus contaminating large parts of the aquifer and threateningwater supplywells. Remediation of highly contaminated aquifer systems is commonly a long-term and expensive proposition. As safe and effective use of the subsurface environment is a major challenge facing our society, there is a great need to improve our understanding of the shallow subsurface and the groundwater systems. This particularly includes the understanding of transport processes, which are responsible for the fate of contaminants.

Book chapter↗
USGS2004

Time-series monitoring in fractured-rock aquifers

Time-lapse monitoring of subsurface processes is an emerging and promising area of hydrogeophysics. The combined use of non-invasive or minimally invasive geophysical methods with hydraulic and geochemical sampling is a cost-effective approach for aquifer characterization, long-term aquifer monitoring, and remediation monitoring. Time-lapse geophysical surveys can indirectly measure time-varying hydrologic parameters such as fluid saturation or solute concentration. Monitoring of time-varying hydrologic processes provides insight into aquifer properties and structure and aquifer responses to natural or induced stresses, such as seasonal fluctuations or fluid injection experiments for active remediation. The U.S. Geological Survey (USGS) Office of Ground Water, Branch of Geophysics, in cooperation with USGS Toxic Substances Hydrology Program, Environmental Protection Agency (USEPA), Department of Defense, the University of Connecticut, and Stanford University researchers, has applied time-lapse geophysics for site characterization and remediation monitoring in a number of studies. Recent and ongoing examples of time-lapse monitoring in fractured-rock aquifers include: 1) application of attenuation-difference, boreholeradar tomography used to monitor a series of sodium chloride tracer injection tests in fractured crystalline rock; 2) application of attenuation- and velocity-difference tomography and radar-reflection data to monitor steam injection in a fractured limestone aquifer; 3) design of an electrical resistivity tomography investigation to monitor the injection of resistive water into brackish water in a fractured limestone aquifer for aquifer storage and recovery (ASR); and 4) combined application of borehole-geophysical logging with long-term discreteinterval monitoring of hydraulic head and water-chemistry in a fractured crystalline-rock aquifer. These investigations demonstrate the application of geophysical methods to provide quantitative information about the subsurface critical for characterizing aquifer structure, flow dynamics, and hydraulic processes.

New Hampshire↗
USGS2004

Use of borehole radar methods and borehole geophysical logs to monitor a field-scale vegetable oil biostimulation pilot project at Fridley, Minnesota

Cross-hole and surface-to-borehole radar and conventional borehole geophysical logs were used to monitor subsurface injections of vegetable oil emulsion conducted as part of a field-scale biostimulation pilot project at the Anoka County Riverfront Park (ACP), located downgradient of the Naval Industrial Reserve Ordnance Plant (NIROP), in Fridley, Minnesota. The pilot project was undertaken to evaluate biostimulation using emulsified vegetable oil for treatment of ground water contaminated with chlorinated hydrocarbons. The objectives of the geophysical investigations were to delineate the distribution of vegetable oil injected at NIROP, and evaluate the utility of adding geophysical tracers to the vegetable oil emulsions. Geophysical data were acquired by the U.S Geological Survey in five site visits over 1.5 years. This paper presents (1) level-run radar traveltime and amplitude data; (2) radar cross-hole traveltime tomograms; (3) vertical-radar profile diffraction tomograms; and (4) borehole electromagnetic induction logs. Based on comparison of pre- and postinjection data sets, a conceptual model was developed to define the distribution of emulsified vegetable oil and the extent of ground water having altered chemistry resulting from injections and, possibly, enhanced microbial degradation of chlorinated hydrocarbons. Radar slowness (reciprocal velocity) anomalies indicate that the emplaced oil emulsion remained close to the injection wells, whereas attenuation anomalies indicate changes in ground-water chemistry downgradient of all three injections.

Minnesota↗
USGS2004

Application of cross-borehole radar to monitor fieldscale vegetable old injection experiments for biostimulation

Cross-borehole radar methods were used to monitor a field-scale biostimulation pilot project at the Anoka County Riverfront Park (ACP), located downgradient of the Naval Industrial Reserve Ordnance Plant, in Fridley, Minnesota. The goal of the pilot project is to evaluate biostimulation using emulsified vegetable oil to treat ground water contaminated with chlorinated hydrocarbons. Vegetable oil is intended to serve as substrate to naturally occurring microbes, which ultimately break down chlorinated hydrocarbons into chloride, carbon dioxide, and water through oxidation-reduction reactions. In support of this effort, cross-borehole radar data were acquired by the U.S Geological Survey in five site visits over 1.5 years. This paper presents level-run (zero-offset profile) and time-lapse radar tomography data collected in multiple planes. Comparison of pre- and post-injection data sets provides valuable insights into the spatial and temporal distribution of both emulsified vegetable oil and also the extent of ground water with altered chemistry resulting from injections — information important for understanding microbial degradation of chlorinated hydrocarbons at the site. In order to facilitate data interpretation and test the effectiveness of radar for monitoring oil-emulsion placement and movement, three injection mixtures with different radar signatures were used: (1) vegetable oil emulsion, (2) vegetable oil emulsion with a colloidal iron tracer, and (3) vegetable oil emulsion with a magnetite tracer. Based on petrophysical modeling, mixture (1) is expected to increase radar velocity and decrease radar attenuation relative to background — a water-saturated porous medium; mixtures (2) and (3) are expected to increase radar velocity and also increase radar attenuation due to their greater electrical conductivity compared to native ground water. Radar slowness (inverse radar velocity) tomograms and level-run profiles show decreases in slowness in the vicinity of injection wells. Slowness anomalies are observed only in planes connected to injection wells, indicating that the emplaced emulsified vegetable oil does not migrate far after injection. In contrast to the localization of slowness anomalies, attenuation anomalies are observed in all level-run profiles, particularly those downgradient of the injection wells. Despite the expected signatures of different tracers, increases in attenuation are observed downgradient of all three injections; thus, we infer that the attenuation changes do not result from the iron tracers. One viable explanation for the observed attenuation changes is that products of oil-enhanced biodegradation (for example, ferrous iron) increase electrical conductivity of ground water and thus radar attenuation. Application of radar methods to data from the ACP demonstrated the utility of radar for monitoring biostimulation. Results of level-run and tomographic surveys identified (1) the distribution of emulsified vegetable oil, and (2) the distribution of ground water with oil-affected chemistry. Ongoing research efforts include simultaneous tomographic inversion of radar data from multiple planes, petrophysical modeling, geostatistical interpolation, and development of an integrated interpretation considering conventional borehole logs and surface-to-borehole radar data.

Minnesota↗
USGS2003

Time‐lapse imaging of saline‐tracer transport in fractured rock using difference‐attenuation radar tomography

Accurate characterization of fractured‐rock aquifer heterogeneity remains one of the most challenging and important problems in groundwater hydrology. We demonstrate a promising strategy to identify preferential flow paths in fractured rock using a combination of geophysical monitoring and conventional hydrogeologic tests. Cross‐well difference‐attenuation ground‐penetrating radar was used to monitor saline‐tracer migration in an experiment at the U.S. Geological Survey Fractured Rock Hydrology Research Site in Grafton County, New Hampshire. Radar data sets were collected every 10 min in three adjoining planes for 5 hours during each of 12 tracer tests. An innovative inversion method accounts for data acquisition times and temporal changes in attenuation during data collection. The inverse algorithm minimizes a combination of two functions. The first is the sum of weighted squared data residuals. Second is a measure of solution complexity based on an a priori space‐time covariance function, subject to constraints that limit radar‐attenuation changes to regions of the tomograms traversed by high difference‐attenuation ray paths. The time series of tomograms indicate relative tracer concentrations and tracer arrival times in the image planes; from these we infer the presence and location of a preferential flow path within a previously identified zone of transmissive fractures. These results provide new insights into solute channeling and the nature of aquifer heterogeneity at the site.

New Hampshire↗
USGS2003

Object-based inversion of crosswell radar tomography data to monitor vegetable-oil injection experiment

Crosswell radar tomography methods can be used to dynamically image ground-water flow and mass transport associated with tracer tests, hydraulic tests, and natural physical processes. Dynamic imaging can be used to identify preferential flow paths and to help characterize complex aquifer heterogeneity. Unfortunately, because the raypath coverage of the interwell region is limited by the borehole geometry, the tomographic inverse problem is typically underdetermined, and tomograms may contain artifacts such as spurious blurring or streaking that confuse interpretation. We implement object-based inversion (using a constrained, non-linear, least-squares algorithm) as an alternative to pixel-based inversion approaches that utilize regularization (such as damping or smoothing criteria). Our approach requires pre- and post-injection travel-time data. Parameterization of the image plane comprises a small number of objects rather than a large number of pixels, resulting in an overdetermined problem that reduces the need for prior information. The nature and geometry of the objects are based on hydrologic insight into aquifer characteristics, the nature of the experiment, and the planned use of the geophysical results. The object-based inversion approach is demonstrated using synthetic and crosswell radar field data acquired during vegetable-oil injection experiments at a site in Fridley, Minnesota. The region where oil has displaced ground water is discretized as a stack of rectangles of variable horizontal extents. The inversion provides the geometry of the affected region and an estimate of the radar slowness change for each rectangle. Applying petrophysical models to these results and porosity from neutron logs, we estimate that the vegetable-oil emulsion saturation in various layers ranges from 60 to 90%. Further work is needed to assess the accuracy of the emulsion saturation estimates. Using synthetic- and field-data examples, the object-based inversion approach is shown to be an effective strategy for inverting crosswell radar tomography data acquired to monitor the emplacement of vegetable-oil emulsions. A principal advantage of object-based inversion is that it yields images that hydrologists and engineers can easily interpret and use for model calibration.

Conference Paper↗