Search USGS⌕ Search

Geology topics

Florian Maldonado

Publications and source records attributed to Florian Maldonado.

At least 19 recordsLinked to original sources
USGS2013

Deformational and erosional history for the Abiquiu and contiguous area, north-central New Mexico: Implications for formation of the Abiquiu embayment and a discussion of new geochronological and geochemical analysis

Geologic mapping, age determinations, and geochemistry of rocks exposed in the Abiquiu area of the Abiquiu embayment of the Rio Grande rift, north-central New Mexico, provide data to determine fault-slip and incision rates. Vertical-slip rates for faults in the area range from 16 m/m.y. to 42 m/m.y., and generally appear to decrease from the eastern edge of the Colorado Plateau to the Abiquiu embayment. Incision rates calculated for the period ca. 10 to ca. 3 Ma indicate rapid incision with rates that range from 139 m/m.y. on the eastern edge of the Colorado Plateau to 41 m/m.y. on the western part of the Abiquiu embayment. The Abiquiu area is located along the margin of the Colorado Plateau–Rio Grande rift and lies within the Abiquiu embayment, a shallow, early extensional basin of the Rio Grande rift. Cenozoic rocks include the Eocene El Rito Formation, Oligocene Ritito Conglomerate, Oligocene–Miocene Abiquiu Formation, and Miocene Chama–El Rito and Ojo Caliente Sandstone Members of the Tesuque Formation (Santa Fe Group). Volcanic rocks include the Lobato Basalt (Miocene; ca. 15–8 Ma), El Alto Basalt (Pliocene; ca. 3 Ma), and dacite of the Tschicoma Formation (Pliocene; ca. 2 Ma). Quaternary deposits consist of inset axial and side-stream deposits of the ancestral Rio Chama (Pleistocene in age), landslide and pediment alluvium and colluvium, and Holocene main and side-stream channel and floodplain deposits of the modern Rio Chama. The predominant faults are Tertiary normal high-angle faults that displace rocks basinward. A low-angle fault, referred to as the Abiquiu fault, locally separates an upper plate composed of the transitional zone of the Ojo Caliente Sandstone and Chama–El Rito Members from a lower plate consisting of the Abiquiu Formation or the Ritito Conglomerate. The upper plate is distended into blocks that range from about 0.1 km to 3.5 km long that may represent a larger sheet that has been broken up and partly eroded. Geochronology ( 40 Ar/ 39 Ar) from fifteen volcanic and intrusive rocks resolves discrete volcanic episodes in the Abiquiu area: (1) emplacement of Early and Late Miocene basaltic dikes at 20 Ma and ca. 10 Ma; (2) extensive Late Miocene–age lava flows at 9.5 Ma, 7.9 Ma, and 5.6 Ma; and (3) extensive basaltic eruptions during the early Pliocene at 2.9 Ma and 2.4 Ma. Clasts of biotite- and hornblende-rich trachyandesites and trachydacites from the base of the Abiquiu Formation are dated at ca. 27 Ma, possibly derived from the Latir volcanic field. The most-mafic magmas are interpreted to be generated from a similar lithospheric mantle during rifting, but variations in composition are correlated with partial melting at different depths, which is correlated with thinning of the crust due to extensional processes.

GSA Special Papers↗
USGS2012

Summary of the geology of the northern part of the Sierra Cuchillo, Socorro and Sierra Counties, southwestern New Mexico

The northern part of the Sierra Cuchillo is located within the northeastern part of the Mogollon-Datil volcanic field west of the Rio Grande rift in the Basin and Range Province, approximately 50 km northwest of Truth or Consequences in south-central New Mexico. The Sierra Cuchillo is a north-south, elongated horst block composed of Tertiary volcanic and intrusive rocks, sparse outcrops of Lower Permian and Upper Cretaceous rocks, and sediments of the Tertiary-Quaternary Santa Fe Group. The horst is composed mainly of a basal volcanic rock sequence of andesite-latite lava flows and mud-flow breccias with a 40 Ar/ 39 Ar isotopic age of about 38 Ma. The sequence is locally intruded by numerous dikes and plugs that range in composition from basaltic andesite through rhyolite and granite. The andesite-latite sequence is overlain by ash-flow tuffs and a complex of rhyolitic lava flows and domes. Some of these units are locally derived and some are outflow sheets derived from calderas in the San Mateo Mountains, northeast of the study area. These locally derived units and outflow sheets range in age from 28 to 24 Ma.

New Mexico↗
USGS2011

Digital geologic map and Landsat image map of parts of Loralai, Sibi, Quetta, and Khuzar Divisions, Balochistan Province, west-central Pakistan

This generalized digital geologic map of west-central Pakistan is a product of the Balochistan Coal-Basin Synthesis Study, which was part of a cooperative program of the Geological Survey of Pakistan and the United States Geological Survey. The original nondigital map was published by Maldonado and others (1998). Funding was provided by the Government of Pakistan and the United States Agency for International Development. The sources of geologic map data are primarily 1:253,440-scale geologic maps obtained from Hunting Survey Corporation (1961) and the geologic map of the Muslim Bagh Ophiolite Complex and Bagh Complex area. The geology was modified based on reconnaissance field work and photo interpretation of 1:250,000-scale Landsat Thematic Mapper photo image. The descriptions and thicknesses of map units were based on published and unpublished reports and converted to U.S. Geological Survey format. In the nomenclature of the Geological Survey of Pakistan, there is both an Urak Group and an Urak Formation.

Open-File Report↗
USGS2011

Summary of the stratigraphy and structural elements related to plate convergence of the Quetta-Muslim Bagh-Sibi region, Balochistan, west-central Pakistan

Obduction of an ophiolite complex onto the northwestern continental margin of the India plate occurred during the Late Cretaceous to early Paleocene, followed by collision of the ophiolitic complex of the India plate with the Eurasia plate in the Eocene. Lower Eocene marine strata overlie the ophiolitic complex suggesting that suturing was completed by early Eocene time. The Quetta-Muslim Bagh-Sibi region is a structurally complex area within west-central Pakistan characterized by broad and tight folds, and reverse, thrust, and strike-slip faults. In order to understand this complex deformation, we have divided this region into five structural domains which are separated by four major boundary faults formed during four major periods of deformation related to oblique convergence of the India and Eurasia plates. The five structural domains are (1) a foredeep, (2) a foreland fold-and-thrust belt, (3) a major deep trough that formed within the foreland fold-and-thrust belt and filled with collision molasse, (4) a thick flysch deposit, and (5) a subduction-obduction and related igneous rock terrane on the margin of the Eurasia plate (Afghan block). The four major faults that bound the structural terrane are the Frontal (F), Ghazaband-Zhob (GZ), Gwal-Bagh (GB), and Chaman (C) faults. Four major periods of deformation are recognized: (1) emplacement of ophiolitic rocks onto the continental margin of the India plate; (2) convergence of the India-Eurasia plates; (3) deposition of Tertiary-Quaternary molasse units followed by major folding and thrusting, and formation of strike-slip faults; and (4) deposition of Pleistocene molasse units with subsequent folding, thrusting, and strike-slip motion that continues to the present.

Open-File Report↗
USGS2010

Stratigraphy and Mesozoic–Cenozoic tectonic history of northern Sierra Los Ajos and adjacent areas, Sonora, Mexico

Geologic mapping in the northern Sierra Los Ajos reveals new stratigraphic and structural data relevant to deciphering the Mesozoic–Cenozoic tectonic evolution of the range. The northern Sierra Los Ajos is cored by Proterozoic, Cambrian, Devonian, Mississippian, and Pennsylvanian strata, equivalent respectively to the Pinal Schist, Bolsa Quartzite and Abrigo Limestone, Martin Formation, Escabrosa Limestone, and Horquilla Limestone. The Proterozoic–Paleozoic sequence is mantled by Upper Cretaceous rocks partly equivalent to the Fort Crittenden and Salero Formations in Arizona, and the Cabullona Group in Sonora, Mexico. Absence of the Upper Jurassic–Lower Cretaceous Bisbee Group below the Upper Cretaceous rocks and above the Proterozoic–Paleozoic rocks indicates that the Sierra Los Ajos was part of the Cananea high, a topographic highland during the Late Jurassic and Early Cretaceous. Deposition of Upper Cretaceous rocks directly on Paleozoic and Proterozoic rocks indicates that the Sierra Los Ajos area had subsided as part of the Laramide Cabullona basin during Late Cretaceous time. Basal beds of the Upper Cretaceous sequence are clast-supported conglomerate composed locally of basement (Paleozoic) clasts. The conglomerate represents erosion of Paleozoic basement in the Sierra Los Ajos area coincident with development of the Cabullona basin. The present-day Sierra Los Ajos reaches elevations of greater than 2600 m, and was uplifted during Tertiary basin-and-range extension. Upper Cretaceous rocks are exposed at higher elevations in the northern Sierra Los Ajos and represent an uplifted part of the inverted Cabullona basin. Tertiary uplift of the Sierra Los Ajos was largely accommodated by vertical movement along the north-to-northwest-striking Sierra Los Ajos fault zone flanking the west side of the range. This fault zone structurally controls the configuration of the headwaters of the San Pedro River basin, an important bi-national water resource in the US-Mexico border region.

Sierra Los Ajos↗
USGS2009

Revisions to the stratigraphic nomenclature of the Abiquiu Formation, Abiquiu and contiguous areas, north-central New Mexico

Stratigraphic studies and geologic mapping on the Abiquiu 7.5-min quadrangle have led to revision of the stratigraphic nomenclature for the Oligocene to Miocene Abiquiu Formation in north-central New Mexico. The Abiquiu Formation had previously been defined to include informal upper, middle (Pedernal chert member), and lower members. The basement-derived conglomeratic lower member in the northern Jemez Mountains and Abiquiu embayment is here redefined. We propose removing the "lower member" from the Abiquiu Formation because provenance of these coarse sediments is dramatically different than the volcaniclastic strata of the "upper member." Furthermore, we propose that the term "lower member of the Abiquiu Formation" be replaced with an existing unit name, the Ritito Conglomerate of Barker (1958), and that the name Abiquiu Formation be restricted to the volcaniclastic succession. The lower part of the Ritito Conglomerate in Arroyo del Cobre on the Abiquiu quadrangle is 47 m (155 ft) thick and is composed of arkosic conglomeratic beds interbedded with arkosic sands and siltstones. Clasts include, in descending order of abundance, Proterozoic quartzite, granite, metavolcanic rocks, quartz, schist, and gneiss and a trace of Mesozoic sandstone and Paleozoic chert. Clasts are predominantly of pebble and cobble size but range from granule to boulder size. Paleocurrent data collected in the Arroyo del Cobre area indicate that the Ritito Conglomerate was deposited by a south-flowing river system during the Oligocene, eroding Laramide highlands such as the Tusas Mountains to the northeast, which contain predominantly Proterozoic rocks. This depositional setting has also been suggested by previous workers. The middle member or Pedernal chert member is present both at the top of the Ritito Conglomerate and as lenses within the lower part of the Abiquiu Formation. This post-depositional diagenetic chert remains an informal unit called the Pedernal chert.

New Mexico↗
USGS2008

Geologic Map of the Abiquiu Quadrangle, Rio Arriba County, New Mexico

The Abiquiu 1:24,000-scale quadrangle is located along the Colorado Plateau-Rio Grande rift margin in north-central New Mexico. The map area lies within the Abiquiu embayment, an early (pre-Miocene) extensional basin of the Rio Grande rift. Rocks exposed include continental Paleozoic and Mesozoic rocks of the Colorado Plateau and Cenozoic basin-fill deposits and volcanic rocks of the Rio Grande rift. Paleozoic units include the Late Pennsylvanian to Early Permian Cutler Group, undivided. Mesozoic units are Upper Triassic Chinle Group, undivided, middle Jurassic Entrada Sandstone, and Todilto Limestone Member of the Wanakah Formation. Mesozoic rocks are folded in some areas and overlain disconformably by Cenozoic rocks. Cenozoic sedimentary rocks are composed of the Eocene El Rito Formation, Oligocene Ritito Conglomerate, Oligocene-Miocene Abiquiu Formation, and Miocene Chama-El Rito and Ojo Caliente Sandstone Members of the Tesuque Formation of the Santa Fe Group. Volcanic rocks include the Lobato Basalt, the El Alto Basalt, and dacite of the Tschicoma Formation. Quaternary deposits consist of inset ancestral axial and tributary Rio Chama deposits and Holocene floodplain alluvium, fan and pediment alluvium, and landslide colluvium.

Scientific Investigations Map↗
USGS2007

Geologic Map of the Pueblo of Isleta Tribal Lands and Vicinity, Bernalillo, Torrance, and Valencia Counties, Central New Mexico

This 1:50,000-scale map compiles geologic mapping of the Pueblo of Isleta tribal lands and vicinity in the central part of the Albuquerque Basin in central New Mexico. The map synthesizes new geologic mapping and summarizes the stratigraphy, structure, and geomorphology of an area of approximately 2,000 km2 that spans the late Paleogene-Neogene Rio Grande rift south of Albuquerque, N. Mex. The map is part of studies conducted between 1996 and 2001 under the U.S. Geological Survey (USGS) Middle Rio Grande Basin Study by geologists from the USGS, the New Mexico Bureau of Geology and Mineral Resources (NMBGMR), and the University of New Mexico (UNM). This work was conducted in order to investigate the geologic factors that influence ground-water resources of the Middle Rio Grande Basin, and to provide new insights into the complex geologic history of the Rio Grande rift in this region.

Scientific Investigations Map↗
USGS2003

Geologic map of the Rio Puerco quadrangle, Bernalillo and Valencia Counties, New Mexico

The Rio Puerco quadrangle is located southwest of Albuquerque in central New Mexico and covers part of the western part of the Isleta Reservation. The U.S. Geological Survey, the New Mexico Bureau of Geology and Mineral Resources, and the University of New Mexico have conducted geologic mapping on the Isleta Reservation and vicinity as part of the Middle Rio Grande Basin Project. The map area contains surficial deposits, calcic soils, fluvial deposits of the Rio Puerco, deposits of the Santa Fe Group, and three volcanic fields. The area is characterized by predominantly north-trending normal faults with generally down-to-the-east movement. Post-Santa Fe Group deposits are composed of surficial deposits (Pleistocene-Holocene) and fluvial deposits of the Rio Puerco (Pleistocene-Holocene). The surficial deposits are divided into eolian, alluvial, colluvial, and landslide deposits. The fluvial deposits of the Rio Puerco consist of four terrace and present channel deposits. The Santa Fe Group is divided into lower and upper parts. The lower part of the Santa Fe Group is exposed near the southwestern corner of the study area where deposits consist of reddish-brown mudstone and sandstone correlated to the Popotosa Formation (Unit 1) of Lozinsky and Tedford (1991). They interpreted deposition of the unit in a basin-floor playa setting. The Popotosa Formation is in fault contact to the east with deposits of the upper Santa Fe Group. The upper Santa Fe Group is derived from major tributary fluvial systems (ancestral Rio Puerco Puerco and possibly the Rio San Jose drainages) draining the adjacent Colorado Plateau and Sierra Nacimiento and correlated to parts of Kelley's (1977) Ceja Formation of the Santa Fe Group and equivalent to Machette's (1978) Sierra Ladrones Formation, Connell's Arroyo Ojito Formation (Connell and others, 1999, and Maldonado's lithofacies of the Isleta Reservation (Maldonado and Atencio,1998a, b). The group also locally includes a fine- grained unit (lower Pleistocene) referred to here as the sand, silt, and clay of Chavez Grant (Qsc). The Ceja Formation of the Santa Fe Group as defined here is divided into the following units in descending stratigraphic order: (1) upper sand and gravel unit (upper Pliocene), (2) middle silt, sand, and clay unit (upper Pliocene), and (3) lower sand and gravel unit (Pliocene). The three volcanic fields in the map area are: (1) basalt of Cat Hills, dated at 98-110 ka and composed of seven lava flows and four cinder cones; the flows overlie calcic soils that overlie the upper sand and gravel unit of the Ceja Formation; (2) lava flow of Cat Mesa, dated at about 3 Ma and interfingers with the upper part of the Ceja Formation; (3) diabase of Mohinas Mountain, dated at 8.3 Ma (Baldridge and others, 1987) and intrudes the Popotosa Formation. Numerous high-angle faults cut the area but are mostly buried. The faults generally trend north but deviate to the northwest and northeast. The major normal faults are the Cat Mesa and Mohinas Mountain faults.

Miscellaneous Field Studies Map↗
USGS2003

Geologic map of the Horse Mountain Quadrangle, Garfield County, Colorado

New 1:24,000-scale geologic map of the Horse Mountain 7.5' quadrangle, in support of the USGS Western Colorado I-70 Corridor Cooperative Geologic Mapping Project, summarizes available geologic information for the quadrangle. It provides new interpretations of the stratigraphy, structure, and geologic hazards in the area of the southwest flank of the White River uplift. Bedrock strata include the Paleocene and early Eocene Wasatch Formation down through Ordovician and Cambrian units into Precambrian hornblende tonalite. The Wasatch Formation includes the Shire, Molina and Atwell Gulch Members which are mapped separately. The underlying Upper Cretaceous Mesaverde Group is subdivided into the Willams Fork and Iles Formations. The Cameo-Fairfield clinker zone within the Williams Fork Formation is mapped separately. The Iles Formation includes the Rollins Sandstone Member at the top, mapped separately, and the Cozzette Sandstone and Corcoran Sandstone Members, which are undivided. The Mancos Shale consists of four members, an upper member, the Niobrara Member, the Juana Lopez Member, and a lower member, undivided. The Lower Cretaceous Dakota Sandstone, the Upper Jurassic Morrison Formation, and Jurassic Entrada Sandstone are mapped separately. The Lower Jurassic and Upper Triassic Glen Canyon Sandstone is mapped with the Entrada in the Horse Mountain Quadrangle. The upper Triassic Chinle Formation and the Lower Permian and Triassic(?) State Bridge Formation are present. The Pennsylvanian and Permian Maroon Formation is undivided. All the exposures of the Middle Pennsylvanian Eagle Valley Evaporite are diapiric, intruded into the Middle Pennsylvanian Eagle Valley Formation, which includes locally mappable limestone beds. The Lower and Middle Pennsylvanian Belden Formation and the Lower Mississippian Leadville Limestone are present. The Upper Devonian Chaffee Group consists of the Dyer Dolomite and the underlying Parting Quartzite, undivided. Locally, the Lower Ordovician Manitou Formation is mapped separately beneath the Chaffee. Elsewhere, Ordovician through Cambrian units, the Manitou and Dotsero Formations, underlain by the Sawatch Quartzite, are undivided. The southwest flank of the White River uplift is a late Laramide structure that is represented by the steeply southwest-dipping Grand Hogback, which is only present in the southwestern corner of the map area, and less steeply southwest-dipping older strata that flatten to nearly horizontal attitudes in the northern part of the map area. Between these two are a complex of normal faults, the largest of which dips southward placing Chafee dolostone and Leadville Limestone adjacent to Eagle Valley and Maroon Formations. Diapiric Eagle Valley Evaporite intruded close to the fault on the down-thrown side. Removal of evaporite by either flow or dissolution from under younger parts of the strata create structural benches, folds, and sink holes on either side of the normal fault. A prominent dipslope of the Morrison-Dakota-Mancos part of the section forms large slide blocks and mass movement deposits consisting of a chaos of admixed Morrison and Dakota lithologies. The major geologic hazard in the area consists of large landslides both associated with dip-slope slide blocks and the steep slopes of the Eagle Valley Formation and Belden Formation in the northern part of the map. Abandoned coal mines are present along the north face of the Grand Hogback in the lower part of the Mesaverde Group

Miscellaneous Field Studies Map↗
USGS2003

Geologic map of the La Mesita Negra SE Quadrangle, Bernalillo County, New Mexico

Geologic mapping, in support of the USGS Middle Rio Grande Basin Geologic Mapping Project, shows the spatial distribution of artificial-fill, alluvial, colluvial, and eolian deposits, lava flows and related sediments of the Albuquerque volcanoes, and upper Santa Fe Group sediments. These deposits are on, beneath, and along the West Mesa (Llano de Albuquerque) just west of Albuquerque, New Mexico. Artificial fill deposits are mapped chiefly beneath and near segments of Interstate 40, in an inactive landfill (or dump) north of Interstate 40 near the eastern boundary of the map area, and in the active Cerro Colorado landfill near the southwestern corner of the map area. Alluvial deposits are mapped in stream channels, beneath treads of terraces, and on hill slopes. They include alluvium in stream channels and beneath treads of low terraces, terrace alluvium, sheetwash deposits, gravelly alluvium, and old alluvium and calcic soils of the Llano de Albuquerque. Alluvial and colluvial deposits are mapped on hill slopes. They include young alluvial-slope deposits, alluvium and colluvium, undivided, and old alluvial-slope deposits. Colluvial deposits are also mapped on hill slopes. They include colluvial deposits, undivided, as well as alluvial deposits, eolian sand, and calcic soils associated with fault scarps. Eolian deposits as well as eolian and alluvial deposits mantle gently slopping surfaces on the Llano de Albuquerque. They include active eolian sand, active and inactive eolian sand and sheetwash deposits, undivided, and inactive eolian sand and sheetwash deposits, undivided. Lava flows and related sediments of the Albuquerque volcanoes were mapped near the southeast corner of the map area. They include five young lava flows, two young cinder deposits, and old lava flows. Upper Santa Fe Group sediments are well exposed and mapped in the western part of the map area. They include a gravel unit, a pebbly sand unit, and a mud and sand unit. Undivided upper Santa Fe Group sediments were mapped in the eastern part of the map area. Sediments and lava flows in the map area record alluvial, eolian, colluvial, and volcanic processes of the past several million years. The surficial deposits (post-Santa Fe Group sediments) on the map are known or estimated to be at least 1 m thick; most deposits are poorly exposed. Thin (< 50 cm), discontinuous deposits of eolian sand and sheetwash (Qea, Qes, and Qsw) locally are present on gently sloping map units older than the alluvium in stream channels and low terraces (Qa). These thin eolian and sheetwash deposits are not mapped, but they are widespread on the gravel unit of the upper Santa Fe Group sediments (Tg) on the eastern flank of the Llano de Albuquerque, near the eastern boundary of the map area (quadrangle). Small deposits of artificial fill (af) less than about 25 m wide are not mapped. Fractional map symbols (for example, Qsw/Qby1) are used where sheetwash deposits mantle lava flows. These fractional units are not described here; instead refer to descriptions of individual units.

Miscellaneous Field Studies Map↗
USGS2000

Geologic map of the Republic of Armenia

This map is a product that resulted from a project by the U.S. Agency for International Development (Participating Agency Service Agreement No. CCN-0002-P-ID-3097-00) to conduct an evaluation of coal and other fossil fuels in the Republic of Armenia. The original map has been translated to English from Russian (Marlen Satian, Academy of Sciences, Armenian Institute of Geological Sciences, written commun., 1994), digitized, and slightly modified in some areas. The original format has been modified to follow the U.S. Geological Survey's format. The map projection is not known. Latitude and longitude tics are approximately located.

Open-File Report↗