Geology topics

Feng Gao

Publications and source records attributed to Feng Gao.

17 recordsLinked to original sources

USGS2026

Mapping winter cover crops using remote sensing of crop phenology

Winter cover crops (WCC) are an effective agricultural conservation practice for improving soil health and water quality. Several U.S. states have established incentive programs to promote planting WCC between cash crop rotations. In recent years, the area planted with WCC has steadily increased due to these efforts, although the planting area varies among states. Since these programs are largely led by individual counties or state programs, there is no centralized data repository that quantifies the total WCC planted annually or their locations. Therefore, there is a practical need to identify fields that have been planted with WCC, as well as to quantify the total planted area both during and after the growing season. Furthermore, incentive programs often require verification that WCC were planted to release payments to participating growers in a timely manner. Satellite remote sensing time series can provide information on WCC growth status. However, it remains unclear what kind of WCC the remote sensing data detects. For example, separating WCC from weeds and winter commodity crops remains a challenge. Additionally, a binary classification of WCC presence and absence cannot accurately describe the category and performance of the WCC. This paper presents a new remote sensing phenology-based approach to map WCC likelihood. We assessed model predictions of WCC likelihood using WCC planting records and ground observations over fields at the Beltsville Agricultural Research Center (BARC) from 2018 to 2024. Regional WCC maps were assessed using the Maryland Department of Agriculture's records of WCC fields enrolled in the 2019 and 2020 incentive programs. Our results show that the balanced overall accuracy for WCC and non-WCC ranges from 75% to 85% but could exceed 90%, with limited training samples. However, the high accuracy of WCC corresponds with low accuracy for non-WCC due to confusion with weeds and perennial grasses. Early-season detection yields promising results, with overall accuracies comparable to late-season detection. The after-season detection can differentiate between winter cereal grain cash crops and incentive WCC based on the ending date of the growing season. With a small set of WCC samples and management information, the phenology-based mapping approach offers a rapid and scalable solution for mapping WCC over a large region during or after each WCC growing season.

Maryland↗

USGS2025

Satellite assessment of winter cover crop and conservation tillage outcomes to support adaptive management in working landscapes

The use of winter cover crops and conservation tillage are agricultural practices promoted to reduce nutrient and sediment loss from cropland, improve soil health, increase infiltration, and support farm nutrient cycling and ecosystem services. However, environmental performance of these practices is variable in the working farm landscape. The Lower Chesapeake Bay research project within the USDA Long-Term Agroecosystem Research (LTAR) network has collaboratively developed satellite remote sensing algorithms to measure the performance and phenology of winter cover crops (aboveground biomass, nitrogen content, fractional cover, and emergence and termination dates) using no-cost Harmonized Landsat and Sentinel-2 multispectral satellite imagery. This research supports annual operational assessment of >28,000 fields per year in four states. Results document the impacts of agronomic management on conservation outcomes, support adaptive management of incentive payment structures, and can reduce the workload for conservation district staff by remotely verifying cover crop management. Additionally, super-spectral satellite applications have been developed to accurately map crop residue cover by measuring lignocellulose absorption in shortwave infrared wavelengths, producing a 7-year time series of tillage intensity maps for the Delmarva Peninsula. These remote sensing products can be used in decision support and modeling to estimate changes in nutrient, sediment, and carbon cycling resulting from conservation practice implementation in the working farm landscape. This manuscript provides an overview of remote sensing research findings and applications associated with the USDA LTAR and Conservation Effects Assessment Projects (CEAP), documenting a variety of previously published outcomes with update and expansion of techniques using additional unpublished data and analyses as appropriate.

Maryland↗

USGS2024

Need and vision for global medium-resolution Landsat and Sentinel-2 data products

Global changes in climate and land use are threatening natural ecosystems, biodiversity, and the ecosystem services people rely on. This is why it is necessary to track and monitor spatiotemporal change at a level of detail that can inform science, management, and policy development. The current constellation of multiple Landsat and Sentinel-2 satellites collecting imagery at predominantly ≤ "> ≤ 30-m spatial resolution affords an opportunity for the generation of global medium- resolution products every few days. Our goal is to both identify the information needs and provide direction towards the generation of a suite of global, high-level, systematically-generated, medium-resolution products designed for both management and science. Our vision builds on the success of the NASA MODIS/VIIRS product suite, while recognizing the unique strengths of medium-resolution satellite data given their higher spatial resolution and longer time series. We propose a suite of 13 essential products that enable the characterization of the current state and changes in the biosphere, cryosphere, and hydrosphere, and would fill information needs identified by the Committee on Earth Observation Satellites for the Global Climate Observing System and the Global Terrestrial Observing System, by the National Research Council of the US National Academies in the decadal survey, and by others. These products are: land cover, land cover change, burned area, forest loss, vegetation indices, phenology, dynamic habitat indices, albedo, land surface temperature, snow cover, ice extent, surface water extent, and evapotranspiration. Furthermore, we provide a list of desirable products poised for addition to the essential products (e.g., crop type, emissivity, and ice sheet velocity). Lastly, we suggest aspirational products requiring further algorithm development (e.g., forest structure and crop yield). For the identified essential products, algorithms are in place, making it feasible to begin generating products systematically. These products should be accompanied by quality and accuracy assessments undertaken following consensus protocols. Five decades after the first Landsat satellite, and two decades after the MODIS products were first produced, it is time now for readily available, standardized, and consistent high-level products built upon medium-resolution imagery, thereby fulfilling the promise and the vision that inspired the Landsat program since its inception.

Remote Sensing of Environment↗

USGS2023

Comparing NISAR (using Sentinel-1), USDA/NASS CDL, and ground truth crop/non-crop areas in an urban agricultural region

A general limitation in assessing the accuracy of land cover mapping is the availability of ground truth data. At sites where ground truth is not available, potentially inaccurate proxy datasets are used for sub-field-scale resolution investigations at large spatial scales, i.e., in the Contiguous United States. The USDA/NASS Cropland Data Layer (CDL) is a popular agricultural land cover dataset due to its high accuracy (>80%), resolution (30 m), and inclusions of many land cover and crop types. However, because the CDL is derived from satellite imagery and has resulting uncertainties, comparisons to available in situ data are necessary for verifying classification performance. This study compares the cropland mapping accuracies (crop/non-crop) of an optical approach (CDL) and the radar-based crop area (CA) approach used for the upcoming NASA-ISRO Synthetic Aperture Radar (NISAR) L- and S-band mission but using Sentinel-1 C-band data. CDL and CA performance are compared to ground truth data that includes 54 agricultural production and research fields located at USDA’s Beltsville Agricultural Research Center (BARC) in Maryland, USA. We also evaluate non-crop mapping accuracy using twenty-six built-up and thirteen forest sites at BARC. The results show that the CDL and CA have a good pixel-wise agreement with one another (87%). However, the CA is notably more accurate compared to ground truth data than the CDL. The 2017–2021 mean accuracies for the CDL and CA, respectively, are 77% and 96% for crop, 100% and 94% for built-up, and 100% and 100% for forest, yielding an overall accuracy of 86% for the CDL and 96% for CA. This difference mainly stems from the CDL under-detecting crop cover at BARC, especially in 2017 and 2018. We also note that annual accuracy levels varied less for the CA (91–98%) than for the CDL (79–93%). This study demonstrates that a computationally inexpensive radar-based cropland mapping approach can also give accurate results over complex landscapes with accuracies similar to or better than optical approaches.

Maryland↗

USGS2023

Integration of remote sensing and field observations in evaluating DSSAT model for estimating maize and soybean growth and yield in Maryland, USA

Crop models are useful for evaluating crop growth and yield at the field and regional scales, but their applications and accuracies are restricted by input data availability and quality. To overcome difficulties inherent to crop modeling, input data can be enhanced by the incorporation of remotely sensed and field observations into crop growth models. This approach has been recognized to be an important way to monitor crop growth conditions and to predict yield at the field and regional scale. In recent years, satellite remote sensing has provided high-temporal and high-spatial-resolution data that allow for generating continuous time series of biophysical parameters such as vegetation indices, leaf area index, and phenology. The objectives of this study were to use remote sensing along with field observations as inputs to the Decision Support System for Agro-Technology (DSSAT) model to estimate soybean and maize growth and yield. The study used phenology and leaf area index (LAI) data derived from Planet Fusion (daily, 3 m) satellite imagery along with field observation data on crop growth stage, LAI and yield collected at the United State Department of Agriculture, Agricultural Research Service, Beltsville Agricultural Research Center (BARC), Beltsville, Maryland. For maize, a total of 17 treatments (site years) were used (ten treatments for model calibration and seven treatments for validation), while for soybean (maturity groups three and four), a total of 18 treatments were used (nine for calibration and nine for validation). The calibrated model was tested against an independent, multi-location and multi-year set of phenology and yield data (2017–2020) from BARC fields. The model accurately simulated maize and soybean days to flowering and maturity and produced reasonable yield estimates for most fields and years. Model run for independent locations and years produced good results for phenology and yields for both maize and soybean, as indicated by index of agreement (d) values ranging from 0.65 to 0.93 and normalized root-mean-squared error values ranging from 1 to 20%, except for soybean maturity group four. Overall, model performances with respect to phenology and grain yield for maize and soybean were good and consistent with other DSSAT evaluation studies. The inclusion of remote sensing along with field observations in crop-growth model inputs can provide an effective approach for assessing crop conditions, even in regions lacking ground data.

Maryland↗

USGS2023

Remote sensing evaluation of winter cover crop springtime performance and the impact of delayed termination

In 2019, the Maryland Department of Agriculture's Winter Cover Crop Program introduced a delayed termination incentive (after May 1) to promote springtime biomass accumulation. We used satellite imagery calibrated with springtime in situ measurements collected from 2006–2021 ( n = 722) to derive biomass estimates for Maryland fields planted to cereal cover crop species (286,200 ha total over two seasons). Cover crop C content remained steady throughout the cover crop growing season (42.6% of biomass), whereas N concentration had an inverse relationship with biomass and ranged from 1.7 to 2.9%. Throughout Maryland, delayed termination fields ( n = 19,120; average termination of May 18) were, on average, estimated to accumulate an additional 789 kg of biomass, 15 kg of N, and 336 kg of C per hectare when compared to fields associated with standard termination dates ( n = 28,811; average termination of April 16). Over two cover crop seasons (2019–2021), the delayed termination incentive yielded an extra 75,660,000 kg biomass, 1,526,000 kg N, and 32,230,000 kg C across 96,040 hectares. Regularly terminated field incentives cost an average of US$0.10 per kg of biomass and $4.09 per kg of N, with variability associated with agronomic management (species, planting method). Delayed termination fields cost of $0.08 per kg of biomass and $3.51 per kg of N. Late-planted cover crops that were terminated early had minimal environmental benefit, and wheat, which comprised 68% of cover crop area, performed poorly compared with other cereal species. Our findings demonstrate that substantial additional springtime biomass, C, and N accumulation were achieved through the delayed termination incentive.

Maryland↗

USGS2023

Near real-time detection of winter cover crop termination using harmonized Landsat and Sentinel-2 (HLS) to support ecosystem assessment

Cover crops are planted to reduce soil erosion, increase soil fertility, and improve watershed management. In the Delmarva Peninsula of the eastern United States, winter cover crops are essential for reducing nutrient and sediment losses from farmland. Cost-share programs have been created to incentivize cover crops to achieve conservation objectives. This program required that cover crops be planted and terminated within a specified time window. Usually, farmers report cover crop termination dates for each enrolled field (∼28,000 per year), and conservation district staff confirm the report with field visits within two weeks of termination. This verification process is labor-intensive and time-consuming and became restricted in 2020–2021 due to the COVID-19 pandemic. This study used Harmonized Landsat and Sentinel-2 (HLS, version 2.0) time-series data and the within-season termination (WIST) algorithm to detect cover crop termination dates over Maryland and the Delmarva Peninsula. The estimated remote sensing termination dates were compared to roadside surveys and to farmer-reported termination dates from the Maryland Department of Agriculture database for the 2020–2021 cover crop season. The results show that the WIST algorithm using HLS detected 94% of terminations (statuses) for the enrolled fields (n = 28,190). Among the detected terminations, about 49%, 72%, 84%, and 90% of remote sensing detected termination dates were within one, two, three, and four weeks of agreement to farmer-reported dates, respectively. A real-time simulation showed that the termination dates could be detected one week after termination operation using routinely available HLS data, and termination dates detected after mid-May are more reliable than those from early spring when the Normalized Difference Vegetation Index (NDVI) was low. We conclude that HLS imagery and the WIST algorithm provide a fast and consistent approach for generating near-real-time cover crop termination maps over large areas, which can be used to support cost-share program verification.

Maryland↗

USGS2022

Fifty years of Landsat science and impacts

Since 1972, the Landsat program has been continually monitoring the Earth, to now provide 50 years of digital, multispectral, medium spatial resolution observations. Over this time, Landsat data were crucial for many scientific and technical advances. Prior to the Landsat program, detailed, synoptic depictions of the Earth's surface were rare, and the ability to acquire and work with large datasets was limited. The early years of the Landsat program delivered a series of technological breakthroughs, pioneering new methods, and demonstrating the ability and capacity of digital satellite imagery, creating a template for other global Earth observation missions and programs. Innovations driven by the Landsat program have paved the way for subsequent science, application, and policy support activities. The economic and scientific value of the knowledge gained through the Landsat program has been long recognized, and despite periods of funding uncertainty, has resulted in the program's 50 years of continuity, as well as substantive and ongoing improvements to payload and mission performance. Free and open access to Landsat data, enacted in 2008, was unprecedented for medium spatial resolution Earth observation data and substantially increased usage and led to a proliferation of science and application opportunities. Here, we highlight key developments over the past 50 years of the Landsat program that have influenced and changed our scientific understanding of the Earth system. Major scientific and programmatic impacts have been realized in the areas of agricultural crop mapping and water use, climate change drivers and impacts, ecosystems and land cover monitoring, and mapping the changing human footprint. The introduction of Landsat collection processing, coupled with the free and open data policy, facilitated a transition in Landsat data usage away from single images and towards time series analyses over large areas and has fostered the widespread use of science-grade data. The launch of Landsat-9 on September 27, 2021, and the advanced planning of its successor mission, Landsat-Next, underscore the sustained institutional support for the program. Such support and commitment to continuity is recognition of both the historic impact the program, and the future potential to build upon Landsat's remarkable 50-year legacy.

Remote Sensing of Environment↗

USGS2020

Detecting cover crop end-of-season using VENµS and sentinel-2 satellite imagery

Cover crops are planted during the off-season to protect the soil and improve watershed management. The ability to map cover crop termination dates over agricultural landscapes is essential for quantifying conservation practice implementation, and enabling estimation of biomass accumulation during the active cover period. Remote sensing detection of end-of-season (termination) for cover crops has been limited by the lack of high spatial and temporal resolution observations and methods. In this paper, a new within-season termination (WIST) algorithm was developed to map cover crop termination dates using the Vegetation and Environment monitoring New Micro Satellite (VENµS) imagery (5 m, 2 days revisit). The WIST algorithm first detects the downward trend (senescent period) in the Normalized Difference Vegetation Index (NDVI) time-series and then refines the estimate to the two dates with the most rapid rate of decrease in NDVI during the senescent period. The WIST algorithm was assessed using farm operation records for experimental fields at the Beltsville Agricultural Research Center (BARC). The crop termination dates extracted from VENµS and Sentinel-2 time-series in 2019 and 2020 were compared to the recorded termination operation dates. The results show that the termination dates detected from the VENµS time-series (aggregated to 10 m) agree with the recorded harvest dates with a mean absolute difference of 2 days and uncertainty of 4 days. The operational Sentinel-2 time-series (10 m, 4–5 days revisit) also detected termination dates at BARC but had 7% missing and 10% false detections due to less frequent temporal observations. Near-real-time simulation using the VENµS time-series shows that the average lag times of termination detection are about 4 days for VENµS and 8 days for Sentinel-2, not including satellite data latency. The study demonstrates the potential for operational mapping of cover crop termination using high temporal and spatial resolution remote sensing data.

Remote Sensing↗

USGS2020

A within-season approach for detecting early crop stage of corn and soybean using high temporal and spatial resolution imagery

Crop emergence is a critical stage for crop development and crop growth modeling. Mapping crop emergence using remote sensing data is challenging. Previous remote sensing phenology algorithms showed that crop stages could be detected around the V3-V4 (3 to 4 established leaves) vegetative stage. Traditional approaches have a strong assumption regarding the temporal evolution of plant growth and normally require a complete growth period of observations to define seasonal changes. Most approaches were not designed for the within-season mapping in the early growing season. In the current paper, we developed a new within-season emergence (WISE) approach to mapping crop green-up date using satellite observations during early growth stages. The approach was first optimized using high spatiotemporal resolution (10 m, 2 day revisit) imagery from the Vegetation and Environment monitoring New MicroSatellite (VENµS) research mission, and assessed using ground observations of early crop growth stages (emergence VE and one leaf V1 stages for corn, and emergence VE and unifoliolate VC stages for soybeans) collected over the Beltsville Agricultural Research Center (BARC) experimental fields in Beltsville, MD during the 2019 growing season. Results show that early crop growth stages can be reliably detected at sub-field scale about two weeks after crop emergence. The remote sensing green-up dates were about 4-5 days after crop emergence on average. Coefficients of determination (R2) between green-up dates and the mid-point dates of the early growth stages were above 0.90. The mean absolute differences, standard deviations, and root mean square errors comparing to the early growth stage mid-point dates were within six days. The maximum differences were within ±10 days across all fields. The WISE approach was assessed using operational Sentinel-2 data (10 m, 5 day revisit) in BARC. The detected green-up dates from Sentinel-2 were found close to VENµS results. Some fields were not detected due to the lack of observations during emergence dates. For independent evaluation, the WISE approach was applied over an agricultural watershed on the Maryland Eastern Shore using both VENµS and the harmonized Landsat and Sentinel-2 (HLS) data (30 m, 3-4 day revisit). The green-up dates were compared with crop progress reports of crop emergence dates from the National Agricultural Statistics Service (NASS) at the state-level. The WISE -detected green-up dates at the regional scale are within VE stage ranges but slightly earlier than NASS crop progress reports at the state-level. The WISE approach uses remote sensing observations during the early crop growth stages and has potential for operational application within the season using Sentinel-2 and HLS data.

Maryland↗

USGS2017

Monitoring land surface albedo and vegetation dynamics using high spatial and temporal resolution synthetic time series from Landsat and the MODIS BRDF/NBAR/albedo product

Seasonal vegetation phenology can significantly alter surface albedo which in turn affects the global energy balance and the albedo warming/cooling feedbacks that impact climate change. To monitor and quantify the surface dynamics of heterogeneous landscapes, high temporal and spatial resolution synthetic time series of albedo and the enhanced vegetation index (EVI) were generated from the 500 m Moderate Resolution Imaging Spectroradiometer (MODIS) operational Collection V006 daily BRDF/NBAR/albedo products and 30 m Landsat 5 albedo and near-nadir reflectance data through the use of the Spatial and Temporal Adaptive Reflectance Fusion Model (STARFM). The traditional Landsat Albedo (Shuai et al., 2011) makes use of the MODIS BRDF/Albedo products (MCD43) by assigning appropriate BRDFs from coincident MODIS products to each Landsat image to generate a 30 m Landsat albedo product for that acquisition date. The available cloud free Landsat 5 albedos (due to clouds, generated every 16 days at best) were used in conjunction with the daily MODIS albedos to determine the appropriate 30 m albedos for the intervening daily time steps in this study. These enhanced daily 30 m spatial resolution synthetic time series were then used to track albedo and vegetation phenology dynamics over three Ameriflux tower sites (Harvard Forest in 2007, Santa Rita in 2011 and Walker Branch in 2005). These Ameriflux sites were chosen as they are all quite nearby new towers coming on line for the National Ecological Observatory Network (NEON), and thus represent locations which will be served by spatially paired albedo measures in the near future. The availability of data from the NEON towers will greatly expand the sources of tower albedometer data available for evaluation of satellite products. At these three Ameriflux tower sites the synthetic time series of broadband shortwave albedos were evaluated using the tower albedo measurements with a Root Mean Square Error (RMSE) less than 0.013 and a bias within the range of ±0.006. These synthetic time series provide much greater spatial detail than the 500 m gridded MODIS data, especially over more heterogeneous surfaces, which improves the efforts to characterize and monitor the spatial variation across species and communities. The mean of the difference between maximum and minimum synthetic time series of albedo within the MODIS pixels over a subset of satellite data of Harvard Forest (16 km by 14 km) was as high as 0.2 during the snow-covered period and reduced to around 0.1 during the snow-free period. Similarly, we have used STARFM to also couple MODIS Nadir BRDF Adjusted Reflectances (NBAR) values with Landsat 5 reflectances to generate daily synthetic times series of NBAR and thus Enhanced Vegetation Index (NBAR-EVI) at a 30 m resolution. While normally STARFM is used with directional reflectances, the use of the view angle corrected daily MODIS NBAR values will provide more consistent time series. These synthetic times series of EVI are shown to capture seasonal vegetation dynamics with finer spatial and temporal details, especially over heterogeneous land surfaces.

International Journal of Applied Earth Observation↗

USGS2017

Impact of tile drainage on evapotranspiration in South Dakota, USA, based on high spatiotemporal resolution evapotranspiration time series from a multi-satellite data fusion system

Soil drainage is a widely used agricultural practice in the midwest USA to remove excess soil water to potentially improve the crop yield. Research shows an increasing trend in baseflow and streamflow in the midwest over the last 60 years, which may be related to artificial drainage. Subsurface drainage (i.e., tile) in particular may have strongly contributed to the increase in these flows, because of its extensive use and recent gain in the popularity as a yield-enhancement practice. However, how evapotranspiration (ET) is impacted by tile drainage on a regional level is not well-documented. To explore spatial and temporal ET patterns and their relationship to tile drainage, we applied an energy balance-based multisensor data fusion method to estimate daily 30-m ET over an intensively tile-drained area in South Dakota, USA, from 2005 to 2013. Results suggest that tile drainage slightly decreases the annual cumulative ET, particularly during the early growing season. However, higher mid-season crop water use suppresses the extent of the decrease of the annual cumulative ET that might be anticipated from widespread drainage. The regional water balance analysis during the growing season demonstrates good closure, with the average residual from 2005 to 2012 as low as -3 mm. As an independent check of the simulated ET at the regional scale, the water balance analysis lends additional confidence to the study. The results of this study improve our understanding of the influence of agricultural drainage practices on regional ET, and can affect future decision making regarding tile drainage systems.

IEEE Journal of Selected Topics in Applied Earth O↗

USGS2014

A cross comparison of spatiotemporally enhanced springtime phenological measurements from satellites and ground in a northern U.S. mixed forest

Cross comparison of satellite-derived land surface phenology (LSP) and ground measurements is useful to ensure the relevance of detected seasonal vegetation change to the underlying biophysical processes. While standard 16-day and 250-m Moderate Resolution Imaging Spectroradiometer (MODIS) vegetation index (VI)-based springtime LSP has been evaluated in previous studies, it remains unclear whether LSP with enhanced temporal and spatial resolutions can capture additional details of ground phenology. In this paper, we compared LSP derived from 500-m daily MODIS and 30-m MODIS-Landsat fused VI data with landscape phenology (LP) in a northern U.S. mixed forest. LP was previously developed from intensively observed deciduous and coniferous tree phenology using an upscaling approach. Results showed that daily MODIS-based LSP consistently estimated greenup onset dates at the study area (625 m × 625 m) level with 4.48 days of mean absolute error (MAE), slightly better than that of using 16-day standard VI (4.63 days MAE). For the observed study areas, the time series with increased number of observations confirmed that post-bud burst deciduous tree phenology contributes the most to vegetation reflectance change. Moreover, fused VI time series demonstrated closer correspondences with LP at the community level (0.1-20 ha) than using MODIS alone at the study area level (390 ha). The fused LSP captured greenup onset dates for respective forest communities of varied sizes and compositions with four days of the overall MAE. This study supports further use of spatiotemporally enhanced LSP for more precise phenological monitoring.

Wisconsin↗

USGS2013

Landsat ecosystem disturbance adaptive processing system (LEDAPS) algorithm description

The Landsat Ecosystem Disturbance Adaptive Processing System (LEDAPS) software was originally developed by the National Aeronautics and Space Administration–Goddard Space Flight Center and the University of Maryland to produce top-of-atmosphere reflectance from LandsatThematic Mapper and Enhanced Thematic Mapper Plus Level 1 digital numbers and to apply atmospheric corrections to generate a surface-reflectance product.The U.S. Geological Survey (USGS) has adopted the LEDAPS algorithm for producing the Landsat Surface Reflectance Climate Data Record.This report discusses the LEDAPS algorithm, which was implemented by the USGS.

Open-File Report↗

USGS2011

A simple and effective method for filling gaps in Landsat ETM+ SLC-off images

The scan-line corrector (SLC) of the Landsat 7 Enhanced Thematic Mapper Plus (ETM+) sensor failed in 2003, resulting in about 22% of the pixels per scene not being scanned. The SLC failure has seriously limited the scientific applications of ETM+ data. While there have been a number of methods developed to fill in the data gaps, each method has shortcomings, especially for heterogeneous landscapes. Based on the assumption that the same-class neighboring pixels around the un-scanned pixels have similar spectral characteristics, and that these neighboring and un-scanned pixels exhibit similar patterns of spectral differences between dates, we developed a simple and effective method to interpolate the values of the pixels within the gaps. We refer to this method as the Neighborhood Similar Pixel Interpolator (NSPI). Simulated and actual SLC-off ETM+ images were used to assess the performance of the NSPI. Results indicate that NSPI can restore the value of un-scanned pixels very accurately, and that it works especially well in heterogeneous regions. In addition, it can work well even if there is a relatively long time interval or significant spectral changes between the input and target image. The filled images appear reasonably spatially continuous without obvious striping patterns. Supervised classification using the maximum likelihood algorithm was done on both gap-filled simulated SLC-off data and the original "gap free" data set, and it was found that classification results, including accuracies, were very comparable. This indicates that gap-filled products generated by NSPI will have relevance to the user community for various land cover applications. In addition, the simple principle and high computational efficiency of NSPI will enable processing large volumes of SLC-off ETM+ data.

Remote Sensing of Environment↗

USGS2009

Development of time series stacks of Landsat images for reconstructing forest disturbance history

Forest dynamics is highly relevant to a broad range of earth science studies, many of which have geographic coverage ranging from regional to global scales. While the temporally dense Landsat acquisitions available in many regions provide a unique opportunity for understanding forest disturbance history dating back to 1972, large quantities of Landsat images will need to be analysed for studies at regional to global scales. This will not only require effective change detection algorithms, but also highly automated, high level preprocessing capabilities to produce images with subpixel geolocation accuracies and best achievable radiometric consistency, a status called imagery-ready-to-use (IRU). This paper describes a streamlined approach for producing IRU quality Landsat time series stacks (LTSS). This approach consists of an image selection protocol, high level preprocessing algorithms and IRU quality verification procedures. The high level preprocessing algorithms include updated radiometric calibration and atmospheric correction for calculating surface reflectance and precision registration and orthorectification routines for improving geolocation accuracy. These automated routines have been implemented in the Landsat Ecosystem Disturbance Adaptive System (LEDAPS) designed for processing large quantities of Landsat images. Some characteristics of the LTSS developed using this approach are discussed.

International Journal of Digital Earth↗

USGS2003

Monitoring vegetation phenology using MODIS

Accurate measurements of regional to global scale vegetation dynamics (phenology) are required to improve models and understanding of inter-annual variability in terrestrial ecosystem carbon exchange and climate–biosphere interactions. Since the mid-1980s, satellite data have been used to study these processes. In this paper, a new methodology to monitor global vegetation phenology from time series of satellite data is presented. The method uses series of piecewise logistic functions, which are fit to remotely sensed vegetation index (VI) data, to represent intra-annual vegetation dynamics. Using this approach, transition dates for vegetation activity within annual time series of VI data can be determined from satellite data. The method allows vegetation dynamics to be monitored at large scales in a fashion that it is ecologically meaningful and does not require pre-smoothing of data or the use of user-defined thresholds. Preliminary results based on an annual time series of Moderate Resolution Imaging Spectroradiometer (MODIS) data for the northeastern United States demonstrate that the method is able to monitor vegetation phenology with good success.

Remote Sensing of Environment↗