Geology topics
F.E. Lichte
Publications and source records attributed to F.E. Lichte.
Multichannel peristaltic pump with a pneumatic nebulizer for atomic absorption or emission spectrometry
No abstract available.
Simmonsite, Na2LiAlF6, a new mineral from the Zapot amazonite-topazzinnwaldite pegmatite, Hawthorne, Nevada, U.S.A
Simmonsite, Na2LiAlF6, a new mineral of pegmatitic-hydrothermal origin, occurs in a late-stage breccia pipe structure that cuts the Zapot amazonite-topaz-zinnvvaldite pegmatite located in the Gillis Range, Mineral Co., Nevada, U.S.A. The mineral is intimately intergrown with cryolite, cryolithionite and trace elpasolite. A secondary assemblage of other alumino-fluoride minerals and a second generation of cryolithionite has formed from the primary assemblage. The mineral is monoclinic, P21 or P21/m, a = 7.5006(6) A??, b = 7.474(1) A??, c = 7.503(1) A??, ??= 90.847(9) ??, V=420.6(1) A??3, Z = 4. The four strongest diffraction maxima [d(A??), likl, I/I100] are (4.33, 111 and 111, 100); (1.877, 400 and 004, 90); (2.25, 13T, 113, 131 and 311, 70); and (2.65, 220, 202, 022, 60). Simmonsite is pale buff cream with white streak, somewhat greasy, translucent to transparent, Mohs hardness of 2.5-3, no distinct cleavage, subconchoidal fracture, no parting, not extremely brittle, Dm is 3.05(2) g/cm3, and Dc is 3.06(1) g/cm3. The mineral is biaxial, very nearly Isotropie, N is 1.359(1) for ?? = 589 nm, and birefringence is 0.0009. Electron microprobe analyses gave (wt%) Na = 23.4, Al = 13.9, F = 58.6, Li = 3.56 (calculated), with a total of 99.46. The empirical formula (based on 6 F atoms) is Na1.98Li1.00 ooAl|ooF6. The crystal structure was not solved, presumably because of unit-cell scale twinning, but similarities to the perovskite-type structure exist. The mineral is named for William B. Simmons, Professor of Mineralogy and Petrology, University of New Orleans, New Orleans.
The chemical evolution and paragenesis of uranium minerals from the ruggles and palermo granitic pegmatites, New Hampshire
A study of the chemical evolution and paragenesis of the uranium minerals at the Palermo No. 1 and Ruggles granitic pegmatites, Grafton County, New Hampshire, revealed four stages of secondary mineralization. A total of eight uranium minerals were identified in the four stages. The first stage is a mixture of uranyl oxide hydroxide-hydrates represented by mineral "A", which surrounds and replaces a uraninite core. The second stage is a carbonate stage found only at the Palermo No. 1 pegmatite, and is represented by rutherfordine. The third stage is represented by uranyl silicates. At the Palermo No. 1 pegmatite, this stage consists of ??-uranophane, and at the Ruggles pegmatite, it consists of soddyite and ??-uranophane. A final fourth stage is a phosphate stage represented by phosphuranylite and meta-autunite I. The first three stages of mineralization developed from hydrothermal and meteoric processes. With dropping temperatures, hydrothermal fluids reached meteoric temperatures and acquired the characteristics of meteoric water. The pH shifted from acidic (pH less than about 6 at 100??C) to alkaline (pH > 7 at 25??C). Since mineral "A" contains hydroxyl and a low amount of molecular water, it probably formed at a temperature greater than 100??C in the acidic environment. After the first stage, the hydrothermal fluids likely reached the temperatures of meteoric water. The initial pH of the meteoric water was acidic (pH less than about 6 at 25??C) and then slowly shifted to alkaline. The mineralizing fluids became oversaturated in CO3, Ca, K, and Si. Uraninite and mineral "A" became unstable and were replaced by rutherfordine and uranyl silicates. The fourth or phosphate stage developed from the introduction of groundwater. The uranyl phosphate minerals precipitated from an acidic fluid (pH < 7 at 25??C) that was oversaturated with Ca, K, U, and P.
Paragenetic and minor- and trace-element studies of Mississippi Valley-type ore deposits of the Silesian-Cracow district, Poland
Paragenetic and minor- and trace-element studies were conducted on samples of epigenetic ore and gangue minerals collected from mines and drill core in the Silesian-Cracow (S-C) district of southern Poland. Four discrete mineral suites representing four mineralizing stages can be identified throughout the district. The earliest epigenetic minerals deposited during stage 1 consist of a late dolomite cement together with minor pyrite and marcasite. Stage 2 was the first ore-forming stage and included repetitive deposition of sphalerite and galena in a variety of morphologies. Stage 3 abruptly followed the first ore stage and deposited marcasite and pyrite with variable amounts of late sphalerite and galena. In the samples studied, minerals deposited during stage 3 are predominately marcasite-pyrite with minor sphalerite and galena in the Pomorzany and Olkusz mines, whereas, at the Trzebionka mine, stage 3 mineralization deposited mostly galena and sphalerite with little marcasite or pyrite. Stage 4 minerals include contains barite, followed by calcite, with very minor pyrite and a rare, late granular sphalerite. Compared to other major Mississippi Valley-type (MVT) districts of the world, the Silesian-Cracow district contains sphalerite with the second largest range in Ag concentrations and the largest range in Fe and Cd concentrations of any district. Unlike in other districts, very wide ranges in minor- and trace-element concentrations are also observed in paragenetically equivalent samples collected throughout the district. This wide range indicates that the minor- and trace-element content of the ore-forming environment was highly variable, both spatially and temporally, and suggests that the hydrologic system that the ore fluids traversed from their basinal source was very complex. Throughout the district, a significant increase in Tl, Ge, and As concentrations is accompanied by a lightening of sulfur isotopes between stage 2 and stage 3 minerals. This change appears to record a major district-scale hydrologic event that probably reflects the introduction of fluids with significantly different geochemistry than that of earlier ore-forming fluids.
A new U-Ti-Ca-HREE hydrated oxide and associated niobian rutile from Topaz Valley, Utah
In October of 1988, specimens of yellow and/or white acicular needles growing out of equant to platy hematite were collected from the east side of Topaz Valley. For the past five years, attempts have been made by all of the authors to completely characterize what is believed to be a new mineral species. Because of several major factors the space group, exact formula, and structure are still unknown. The potentially new mineral and some associated minerals are described here with the hope that elsewhere in the world better and more material exists that will allow complete characterization. -from Authors
The biogeochemistry of wetlands in the San Luis Valley, Colorado: The effects of acid drainage from natural and mine sources
The Summitville Mine, located near the old mining town of Summitville in Rio Grande County, Colorado, operated between July 1986 and December 1992 as a large-tonnage open-pit heap-leach gold mine. During its 6 years of existence the trace metal levels in drainage water from the mine site were elevated over historical (pre-1986) levels (Moran and Wentz, 1974) due to input from three sources—heap leach water, seeps that occur throughout the mine workings, and an increase in the metal load of water coming from the old Reynolds Adit. Mine-drainage waters flow into Wightman Fork, a small tributary of the Alamosa River, which in turn flows east into the San Luis Valley. The increase in the trace metal burden of the Alamosa River watershed is of concern to farmers, land owners, and Federal and State wildlife agencies. The information presented here is largely abstracted from reports previously published (Balistrieri and others, 1995; Gough and others, 1995).
McCrillisite, NaCs(Be,Li)Zr2(PO4)4.1-2H2O, a new mineral species from Mount Mica, Oxford County, Maine, and new data for gainesite
McCrillisite, a member of the gainesite group, occurs in the Mount Mica granitic pegmatite, South Paris, Oxford County, Maine. The mineral is a product of late-stage hydrothermal alteration and is associated with approximately 20 other silicate, oxide, carbonate, arsenite and phosphate minerals. Crystals occur in mm- to cm-sized cavities, and individuals are up to 1.2 mm in maximum dimension. The crystallography and mineral chemistry of McCrillisite are described. -from Authors
Geochemistry of Mariano Lake-Lake Valley cores, McKinley County, New Mexico
No abstract available.
Tektites in Cretaceous-Tertiary boundary rocks on Haiti
Explore the source record for details and available documents.
Volatilization, transport and sublimation of metallic and non-metallic elements in high temperature gases at Merapi Volcano, Indonesia
Condensates, silica tube sublimates and incrustations were sampled from 500–800°C fumaroles and lava samples were collected at Merapi Volcano, Indonesia in Jan.–Feb., 1984. With respect to the magma, Merapi gases are enriched by factors greater than 10 5 in Se, Re, Bi and Cd; 10 4 –10 5 in Au, Br, In, Pb and W; 10 3 –10 4 in Mo, Cl, Cs, S, Sn and Ag; 10 2 –10 3 in As, Zn, F and Rb; and 1–10 2 in Cu, K, Na, Sb, Ni, Ga, V, Fe, Mn and Li. The fumaroles are transporting more than 10 6 grams/day ( g d "> gd ) of S, Cl and F; 10 4 –10 6 g/d of Al, Br, Zn, Fe, K and Mg; 10 3 –10 4 g d "> gd of Pb, As, Mo, Mn, V, W and Sr; and less than 10 3 g d "> gd of Ni, Cu, Cr, Ga, Sb, Bi, Cd, Li, Co and U. With decreasing temperature (800-500°C) there were five sublimate zones found in silica tubes: 1) cristobalite and magnetite (first deposition of Si, Fe and Al); 2) K-Ca sulfate, acmite, halite, sylvite and pyrite (maximum deposition of Cl, Na, K, Si, S, Fe, Mo, Br, Al, Rb, Cs, Mn, W, P, Ca, Re, Ag, Au and Co); 3) aphthitalite (K-Na sulfate), sphalerite, galena and Cs-K. sulfate (maximum deposition of Zn, Bi, Cd, Se and In; higher deposition of Pb and Sn); 4) Pb-K chloride and Na-K-Fe sulfate (maximum deposition of Pb, Sn and Cu); and 5) Zn, Cu and K-Pb sulfates (maximum deposition of Pb, Sn, Ti, As and Sb). The incrustations surrounding the fumaroles are also chemically zoned. Bi, Cd, Pb, W, Mo, Zn, Cu, K, Na, V, Fe and Mn are concentrated most in or very close to the vent as expected with cooling, atmospheric contamination and dispersion. The highly volatile elements Br, Cl, As and Sb are transported primarily away from high temperature vents. Ba, Si, P, Al, Ca and Cr are derived from wall rock reactions. Incomplete degassing of shallow magma at 915°C is the origin of most of the elements in the Merapi volcanic gas, although it is partly contaminated by particles or wall rock reactions. The metals are transported predominantly as chloride species. As the gas cools in the fumarolic environment, it becomes saturated with sublimate phases that fractionate from the gas in the order of their equilibrium saturation temperatures. Devolatilization of a cooling batholith could transport enough acids and metals to a hydrothermal system to play a significant role in forming an ore deposit. However, sublimation from a high temperature, high velocity carrier gas is not efficient enough to form a large ore deposit. Re, Se, Cd and Bi could be used as supporting evidence for magmatic fluid transport in an ore deposit.
Analytical methods for the analysis of stream sediments and rocks from Wilderness Study Areas
Explore the source record for details and available documents.
Separation and preconcentration of the rare-earth elements and yttrium from geological materials by ion-exchange and sequential acid elution
The abundance of rare-earth elements (REE) and yttrium in geological materials is generally low, and most samples contain elements that interfere in the determination of the REE and Y, so a separation and/or preconcentration step is often necessary. This is often achieved by ion-exchange chromatography with either nitric or hydrochloric acid. It is advantageous, however, to use both acids sequentially. The final solution thus obtained contains only the REE and Y, with minor amounts of Al, Ba, Ca, Sc, Sr and Ti. Elements that potentially interfere, such as Be, Co, Cr, Fe, Mn, Th, U, V and Zr, are virtually eliminated. Inductively-coupled argon plasma atomic-emission spectroscopy can then be used for a final precise and accurate measurement. The method can also be used with other instrumental methods of analysis.
The group separation of the rare-earth elements and yttrium from geologic materials by cation-exchange chromatography
Demand is increasing for the determination of the rare-earth elements (REE) and yttrium in geologic materials. Due to their low natural abundance in many materials and the interferences that occur in many methods of determination, a separation procedure utilizing gradient strong-acid cation-exchange chromatography is often used to preconcentrate and isolate these elements from the host-rock matrix. Two separate gradient strong-acid cation-exchange procedures were characterized and the major elements as well as those elements thought to provide the greatest interference for the determination of the REE in geologic materials were tested for separation from the REE. Simultaneous inductively coupled argon plasma-atomic emission spectroscopy (ICAP-AES) measurements were used to construct the chromatograms for the elution studies, allowing the elution patterns of all the elements of interest to be determined in a single fraction of eluent. As a rock matrix, U.S. Geological Survey standard reference BCR-1 basalt was digested using both an acid decomposition procedure and a lithium metaborate fusion. Hydrochloric and nitric acids were tested as eluents and chromatograms were plotted using the ICAP-AES data; and we observed substantial differences in the elution patterns of the REE and as well as in the solution patterns of Ba, Ca, Fe and Sr. The nitric acid elution required substantially less eluent to elute the REE and Y as a group when compared to the hydrochloric acid elution, and provided a clearer separation of the REE from interfering and matrix elements. ?? 1984.
Major, minor, and trace elements in samples from the Wheeler Wilderness Study Area, Colorado, as determined by inductively coupled argon plasma-atomic emission spectrometry
Explore the source record for details and available documents.
An improved method for the determination of trace levels of arsenic and antimony in geological materials by automated hydride generation–Atomic absorption spectroscopy
An improved, automated method for the determination of arsenic and antimony in geological materials is described. After digestion of the material in sulfuric, nitric, hydrofluoric and perchloric acids, a hydrochloric acid solution of the sample is automatically mixed with reducing agents, acidified with additional hydrochloric acid, and treated with a sodium tetrahydroborate solution to form arsine and stibine. The hydrides are decomposed in a heated quartz tube in the optical path of an atomic absorption spectrometer. The absorbance peak height for arsenic or antimony is measured. Interferences that exist are minimized to the point where most geological materials including coals, soils, coal ashes, rocks and sediments can be analyzed directly without use of standard additions. The relative standard deviation of the digestion and the instrumental procedure is less than 2% at the 50 μg l -1 As or Sb level. The reagent-blank detection limit is 0.2 μg l -1 As or Sb.
The determination of trace-level antimony in geological materials by semi-automated hydride generation-atomic absorption spectroscopy
Explore the source record for details and available documents.