Search USGSSearch

Geology topics

Erica L. DiFilippo

Publications and source records attributed to Erica L. DiFilippo.

2 recordsLinked to original sources

DDT and related compounds in pore water of shallow sediments on the Palos Verdes Shelf, California, USA

For nearly two and a half decades following World War II, production wastes from the world's largest manufacturer of technical DDT (1-chloro-4-[2,2,2-trichloro-1-(4-chlorophenyl)ethyl]benzene) were discharged into sewers of Los Angeles County. Following treatment, the wastes were released via a submarine outfall system to nearshore coastal waters where a portion accumulated in shallow sediments of the Palos Verdes Shelf (PVS). An investigation of the pore-water geochemistry of DDT-related compounds (DDX) was undertaken in an effort to understand factors controlling the rate of reductive dechlorination (RDC) of the major DDT degradate, 4,4′-DDE (1-chloro-4-[2,2-dichloro-1-(4-chlorophenyl)ethenyl]benzene). Equilibrium matrix-solid phase microextraction (matrix-SPMEeq) combined with automated thermal desorption-gas chromatography/mass spectrometry (TDGC/MS) was used to determine freely dissolved concentrations of ten DDX analytes in sediment cores collected from three locations on the PVS (stations 3C, 6C, 8C, which are 7 km, 2 km, and 0 km, respectively, downcurrent from the outfall system). Pore-water concentrations (pM) of the principal DDX compounds involved in RDC were: 3C-DDE: 6.0–24, DDMU (1-chloro-4-[2-chloro-1-(4-chlorophenyl)ethenyl]benzene): 11–160, DDNU (1-chloro-4-[1-(4-chlorophenyl)ethenyl]benzene): 1.8–68; 6C-DDE: 5.6–170, DDMU: 5.6–177, DDNU: 1.7–87; 8CDDE: 27–212, DDMU: 31–403, DDNU: 5.5–89. Variations in the spatial distribution of DDX analytes in pore water reflect several factors including proximity to the outfalls, RDC reaction rates, and natural variability in sedimentation and post-depositional transport processes. A comparison of pore-water data produced using matrix-SPME eq /TD-GC/MS and whole-core squeezing/solvent extraction/liquid injection-GC/MS indicates that the majority of the DDE in the upper sediment column (≤about 10 cm) is associated with dissolved/colloidal organic matter. Below that depth, freely-dissolved DDE predominates. The principal organic geochemical phase controlling sorption of DDE in PVS sediments are residual hydrocarbons, the vast majority of which originated from petroleum refinery wastes. Organic carbon-normalized sediment-water distribution coefficients (KOC) were calculated from solid-phase and pore-water concentrations of DDX and organic carbon. Log K OC values (L/kg) were relatively invariant across the shelf and with depth in the sediment column. Shelf-wide compound-specific coefficients (log K OC ) were: DDE: 7.5 ± 0.11, DDMU: 6.92 ± 0.13, DDNU: 6.37 ± 0.19. The spatial uniformity of K OC means that biological exposure and availability of the DDX compounds can, in principle, be estimated from solid-phase chemical measurements.

California

Assessment of PDMS-water partition coefficients: implications for passive environmental sampling of hydrophobic organic compounds

Solid-phase microextraction (SPME) has shown potential as an in situ passive-sampling technique in aquatic environments. The reliability of this method depends upon accurate determination of the partition coefficient between the fiber coating and water (K f ). For some hydrophobic organic compounds (HOCs), K f values spanning 4 orders of magnitude have been reported for polydimethylsiloxane (PDMS) and water. However, 24% of the published data examined in this review did not pass the criterion for negligible depletion, resulting in questionable K f values. The range in reported K f is reduced to just over 2 orders of magnitude for some polychlorinated biphenyls (PCBs) when these questionable values are removed. Other factors that could account for the range in reported K f , such as fiber-coating thickness and fiber manufacturer, were evaluated and found to be insignificant. In addition to accurate measurement of K f , an understanding of the impact of environmental variables, such as temperature and ionic strength, on partitioning is essential for application of laboratory-measured K f values to field samples. To date, few studies have measured K f for HOCs at conditions other than at 20 degrees or 25 degrees C in distilled water. The available data indicate measurable variations in K f at different temperatures and different ionic strengths. Therefore, if the appropriate environmental variables are not taken into account, significant error will be introduced into calculated aqueous concentrations using this passive sampling technique. A multiparameter linear solvation energy relationship (LSER) was developed to estimate log K f in distilled water at 25 degrees C based on published physicochemical parameters. This method provided a good correlation (R2 = 0.94) between measured and predicted log K f values for several compound classes. Thus, an LSER approach may offer a reliable means of predicting log K f for HOCs whose experimental log K f values are presently unavailable. Future research should focus on understanding the impact of environmental variables on K f . Obtaining the data needed for an LSER approach to estimate K f for all environmentally relevant HOCs would be beneficial to the application of SPME as a passive-sampling technique.

Environmental Science & Technology