Geology topics

Emily C. Roland

Publications and source records attributed to Emily C. Roland.

9 recordsLinked to original sources

USGS2021

Colored shaded-relief bathymetry, acoustic backscatter, and selected perspective views of the northern part of the California Continental Borderland, southern California

The California Continental Borderland is the complex continental margin in southern California that extends from Point Conception southward into northern Baja California (Fisher and others, 2009). This colored shaded-relief bathymetry map of the northern continental borderland in southern California was generated primarily from multibeam-echosounder data collected by the University of Washington in 2016, the Ocean Exploration Trust-Nautilus Exploration Program in 2015–17, and the National Oceanic and Atmospheric Administration in 2017. These datasets were processed in part by the U.S. Geological Survey. Additional smaller amounts of publicly available multibeam-bathymetry data collected by other federal and local agencies, academic institutions, and private firms were also incorporated into this map. Since the production of this map, other multibeam-bathymetry data have been collected in this region.

California↗

USGS2020

The Alaska Amphibious Community Seismic Experiment

The Alaska Amphibious Community Seismic Experiment (AACSE) is a shoreline‐crossing passive‐ and active‐source seismic experiment that took place from May 2018 through August 2019 along an ∼ 700    km "> ∼ 700 km ∼700 km long section of the Aleutian subduction zone spanning Kodiak Island and the Alaska Peninsula. The experiment featured 105 broadband seismometers; 30 were deployed onshore, and 75 were deployed offshore in Ocean Bottom Seismometer (OBS) packages. Additional strong‐motion instruments were also deployed at six onshore seismic sites. Offshore OBS stretched from the outer rise across the trench to the shelf. OBSs in shallow water ( ⁠ < 262    m "> < 262 m <262 m depth) were deployed with a trawl‐resistant shield, and deeper OBSs were unshielded. Additionally, a number of OBS‐mounted strong‐motion instruments, differential and absolute pressure gauges, hydrophones, and temperature and salinity sensors were deployed. OBSs were deployed on two cruises of the R/V Sikuliaq in May and July 2018 and retrieved on two cruises aboard the R/V Sikuliaq and R/V Langseth in August–September 2019. A complementary 398‐instrument nodal seismometer array was deployed on Kodiak Island for four weeks in May–June 2019, and an active‐source seismic survey on the R/V Langseth was arranged in June 2019 to shoot into the AACSE broadband network and the nodes. Additional underway data from cruises include seafloor bathymetry and sub‐bottom profiles, with extra data collected near the rupture zone of the 2018 M w "> M w Mw 7.9 offshore‐Kodiak earthquake. The AACSE network was deployed simultaneously with the EarthScope Transportable Array (TA) in Alaska, effectively densifying and extending the TA offshore in the region of the Alaska Peninsula. AACSE is a community experiment, and all data were made available publicly as soon as feasible in appropriate repositories.

Alaska↗

USGS2020

Morphology, structure, and kinematics of the San Clemente and Catalina faults based on high-resolution marine geophysical data, southern California Inner Continental Borderland

Catalina Basin, located within the southern California Inner Continental Borderland (ICB), is traversed by two active submerged fault systems that are part of the broader North America-Pacific plate boundary: the San Clemente fault (along with a prominent splay, the Kimki fault) and the Catalina fault. Previous studies have suggested that the San Clemente fault (SCF) may be accommodating up to half of the approximately 8 mm/yr right-lateral slip distributed across the ICB between San Clemente Island and the mainland coast, and that the Catalina fault (CF) acts as a significant restraining bend in the larger transform system. Here, we provide new high-resolution geophysical constraints on the seabed morphology, deformation history, and kinematics of the active faults in and on the margins of Catalina Basin. We significantly revise SCF mapping and describe a discrete releasing bend that corresponds with lows in gravity and magnetic anomalies, as well as a connection between the SCF and the Santa Cruz fault to the north. Subsurface seismic-reflection data show evidence for a vertical SCF with significant lateral offsets, while the CF exhibits lesser cumulative deformation with a vertical component indicated by folding adjacent to the CF. Geodetic data are consistent with SCF right-lateral slip rates as high as ~3.6 mm/yr and transpressional convergence of <1.5 mm/yr accommodated along the CF. The Quaternary strands of the SCF and CF consistently cut across Miocene and Pliocene structures, suggesting generation of basin and ridge morphology in a previous tectonic environment that has been overprinted by Quaternary transpression. Some inherited crustal fabrics, especially thinned crust and localized, relatively hard crustal blocks, appear to have had a strong influence on the geometry of the main trace of the SCF, whereas inherited faults and other structures (e.g., the Catalina Ridge) appear to have minimal influence on the geometry of active faults in the ICB.

California↗

USGS2019

Seismic velocity structure across the 2013 Craig, Alaska rupture from aftershock tomography: Implications for seismogenic conditions

The 2013 Craig, Alaska M W 7.5 earthquake ruptured along ∼150 km of the Queen Charlotte Fault (QCF), a right-lateral strike-slip plate boundary fault separating the Pacific and North American plates. Regional shear wave analyses suggest that the Craig earthquake rupturepropagated in the northward direction faster than the S-wave (supershear). Theoretical studies suggest that a bimaterial interface, such as that along the QCF, which separates oceanic and continental crust with differing elastic properties, can promote supershear rupture propagation. We deployed short-period ocean-bottom seismometers (OBS) as a part of a rapid-response effort less than four months after the Craig earthquake mainshock. During a 21-day period, 1,133 aftershocks were recorded by 8 OBS instruments. Aftershock spatial distribution indicates that the base of the seismogenic zone along the QCF approaches ∼25 km depth, consistent with a thermally-controlled fault rheology expected for igneous rocks at oceanic transform faults. The spatial distribution also provides supporting evidence for a previously hypothesized active strand of the QCF system within the Pacific Plate. Tomographic traveltime inversion for velocity structure indicates a low-velocity (V P and V S ) zone on the Pacific side of the plate boundary at 5–20 km depths, where NeogenePacific crust and upper mantle seismic velocities average ∼3–11% slower than the North American side, where the Paleozoic North American crust is seismically faster. Our results suggest that elastic properties along the studied portion of the QCF are different than those of a simple oceanic–continental plate boundary fault. In our study region, velocity structure across the QCF, while bimaterial, does not support faster material on the west side of the fault, which has been proposed as one possible explanation for northward supershear propagation during the Craig earthquake. Instead, we image low-velocity material on the west side of the fault. Explanations could include that part of the rupture was subshear, or that fault damage zone properties or fault smoothness are more important controls on supershear rupture than a bimaterial contrast.

Alaska↗

USGS2018

The tectonically controlled San Gabriel Channel–Lobe Transition Zone, Catalina Basin, Southern California Borderland

High-resolution geophysical data across the Catalina Basin, offshore southern California, USA, reveal a complex channel–lobe transition zone (CLTZ) and provide an opportunity to characterize an entire seafloor CLTZ in a tectonically active and confined-basin setting. The seafloor morphology, distribution of depositional and erosional features, and location of depocenters in the CLTZ are controlled by shifting confinement and seafloor gradient related to inherited basement structures, active faults, and basin margins. Below a Holocene hemipelagic drape, the Catalina Basin is dominated by CLTZ and lobe sedimentation from the San Gabriel Channel, with lesser accumulations from local sediment sources limited to basin margins. The San Gabriel Channel is structurally confined as it enters the Catalina Basin and appears unable to avulse; it continues into the basin as a channel that rapidly widens, decreases in relief, and becomes scoured at its margins. A CLTZ is imaged between the confined San Gabriel channel and its terminal lobes deposited > 50 km into the basin. Narrow, apparently disconnected channels with knickpoints occur throughout the proximal and mid-CLTZ and are concentrated near basement highs and basin-bounding Quaternary-active dextral strike-slip faults. A field of small-scale erosional crescent-shaped scours (∼ 100 m length, ∼ 200 m width, up to ∼ 10 m relief across ∼ 30 km 2 region) occurs above a partially buried basement high that creates perturbations in seafloor gradient. Likewise, above a buried basement structure that locally increases seafloor gradient (up to 0.4°), the distal CLTZ may contain sediment waves (∼ 2–4 m wave height and ∼ 200–300 m wavelength) that are smaller than many other CLTZ examples. This study of the San Gabriel CLTZ in Catalina Basin provides high-resolution geophysical data coverage of a complete CLTZ and illustrates a tectonically controlled end-member CLTZ from the modern seafloor.

Journal of Sedimentary Research↗

USGS2018

Seafloor fluid seeps on Kimki Ridge, offshore southern California: Links to active strike-slip faulting

The Kimki Ridge fluid seeps are located in western Catalina Basin about 60 km southwest of the southern California mainland and at a water depth of approximately 1100 m. Multichannel seismic reflection profiles collected by the U.S. Geological Survey (USGS) in 2014 show acoustic transparency within the Kimki Ridge, suggesting the possibility of fluid seeps and possible sub-seafloor fluid pathways. Subsequent multibeam bathymetric and backscatter intensity data collected during a cooperative University of Washington/USGS cruise in early 2016 show subtle seafloor buildups with high acoustic backscatter (reflectivity) in three places along Kimki Ridge, supporting the existence of fluid seepage. A Remotely Operated Vehicle (ROV) dive, conducted as part of the Nautilus Exploration Program, took place in August 2016 to confirm the presence of these previously unknown seeps and document their characteristics as well as those of any associated biological communities. Two of the three seeps were explored by ROV, and showed abundant evidence of fluid seepage, including characteristic algal mats, chemosynthetic clams, and authigenic carbonate formation. The seeps are comprised of carbonate buildups 1–3 m thick and 300–500 m across. Within these areas, we interpret broad crater-like depressions 30–50 m across and 1–2 m deep to be individual seep vents. The seep areas appear to be broad zones of diffuse seepage that support chemosynthetic biologic communities; however, active venting was not observed. Geochemical analyses of rock samples collected from the seeps indicate microbially driven anaerobic oxidation of methane at or near the sediment water interface. Seismic-reflection profiles show chimney-like fluid pathways along the limbs and in the axis of the fold forming Kimki Ridge, and evidence of methane in shallow sediments can be traced into the adjacent Catalina Basin. A system of closely spaced faults located at the axis of the Kimki Ridge anticline may serve as pathways to allow fluid flow to the seafloor. Our data are consistent with other studies that suggest that transpression is an important component in the formation and localization of fluid seeps in a strike-slip setting, implying that seep formation may be a common occurrence at fault stepovers or transpressional bends in strike-slip systems.

California↗

USGS2016

Building a subduction zone observatory

Subduction zones contain many of Earth’s most remarkable geologic structures, from the deepest oceanic trenches to glacier-covered mountains and steaming volcanoes. These environments formed through spectacular events: Nature’s largest earthquakes, tsunamis, and volcanic eruptions are born here.

Eos, Earth and Space Science News↗

USGS2015

Basement and regional structure along strike of the Queen Charlotte Fault in the context of modern and historical earthquake ruptures

The Queen Charlotte fault (QCF) is a dextral transform system located offshore of southeastern Alaska and western Canada, accommodating &sim;4.4  cm/yr of relative motion between the Pacific and North American plates. Oblique convergence along the fault increases southward, and how this convergence is accommodated is still debated. Using seismic reflection data, we interpret offshore basement structure, faulting, and stratigraphy to provide a geological context for two recent earthquakes, an M w 7.5 strike‐slip event near Craig, Alaska, and an M w 7.8 thrust event near Haida Gwaii, Canada. We map downwarped Pacific oceanic crust near 54° N, between the two rupture zones. Observed downwarping decreases north and south of 54° N, parallel to the strike of the QCF. Bending of the Pacific plate here may have initiated with increased convergence rates due to a plate motion change at &sim;6  Ma. Tectonic reconstruction implies convergence‐driven Pacific plate flexure, beginning at 6 Ma south of a 10° bend the QCF (which is currently at 53.2° N) and lasting until the plate translated past the bend by &sim;2  Ma. Normal‐faulted approximately late Miocene sediment above the deep flexural depression at 54° N, topped by relatively undeformed Pleistocene and younger sediment, supports this model. Aftershocks of the Haida Gwaii event indicate a normal‐faulting stress regime, suggesting present‐day plate flexure and underthrusting, which is also consistent with reconstruction of past conditions. We thus favor a Pacific plate underthrusting model to initiate flexure and accommodation space for sediment loading. In addition, mapped structures indicate two possible fault segment boundaries along the QCF at 53.2° N and at 56° N.

Alaska↗

USGS2014

Source and progression of a submarine landslide and tsunami: The 1964 Great Alaska earthquake at Valdez

Like many subduction zone earthquakes, the deadliest aspects of the 1964 M = 9.2 Alaska earthquake were the tsunamis it caused. The worst of these were generated by local submarine landslides induced by the earthquake. These caused high runups, engulfing several coastal towns in Prince William Sound. In this paper, we study one of these cases in detail, the Port Valdez submarine landslide and tsunami. We combine eyewitness reports, preserved film, and careful posttsunami surveys with new geophysical data to inform numerical models for landslide tsunami generation. We review the series of events as recorded at Valdez old town and then determine the corresponding subsurface events that led to the tsunami. We build digital elevation models of part of the pretsunami and posttsunami fjord‐head delta. Comparing them reveals a ~1500 m long region that receded 150 m to the east, which we interpret as the primary delta landslide source. Multibeam imagery and high‐resolution seismic reflection data identify a ~400 m wide chute with hummocky deposits at its terminus, which may define the primary slide path. Using these elements we run hydrodynamic models of the landslide‐driven tsunamis that match observations of current direction, maximum inundation, and wave height at Valdez old town. We speculate that failure conditions at the delta front may have been influenced by manmade changes in drainage patterns as well as the fast retreat of Valdez and other glaciers during the past century.

Alaska↗