Search USGS⌕ Search

Geology topics

Emile M. Bergeron

Publications and source records attributed to Emile M. Bergeron.

6 recordsLinked to original sources
USGS2021

Discrete sample introduction module for quantitative and isotopic analysis of methane and other gases by cavity ring-down spectroscopy

Carbon dioxide (CO 2 ) and methane (CH 4 ) are natural and anthropogenic products that play a central role in the global carbon cycle and regulating Earth’s climate. Applications utilizing laser absorption spectroscopy, which continuously measure concentrations and stable isotope ratios of these greenhouse gases, are routinely employed to measure the source and magnitude of atmospheric inputs. We developed a discrete sample introduction module (DSIM) to enable measurements of methane and CO 2 concentrations and δ 13 C values from limited volume (5–100 mL) gas samples when interfaced with a commercially available cavity ring-down spectroscopy (CRDS) analyzer. The analysis has a dynamic range that spans six orders of magnitude from 100% analyte to the lower limit of instrument detection (2 ppm). We demonstrate system performance for methane by comparing concentrations and δ 13 C results from the DSIM-CRDS system and traditional methods for a variety of sample types, including low concentration (nanomolar CH 4 ) seawater and high concentration (>90% CH 4 ) natural gas. The expansive concentration range of the field-portable DSIM-CRDS system can measure enhances analytical performance for investigating methane and CO 2 dynamics and, potentially, other gases measured by laser absorption spectroscopy.

Environmental Science & Technology↗
USGS2015

Marine geophysical data collected in a shallow back-barrier estuary, Barnegat Bay, New Jersey

In 2011, the U.S. Geological Survey, in cooperation with the New Jersey Department of Environmental Protection, began a multidisciplinary research project to better understand the water quality in Barnegat Bay, New Jersey. This back-barrier estuary is experiencing degraded water quality, algal blooms, loss of seagrass, and increases in oxygen stress, macroalgae, stinging nettles, and brown tide. The spatial scale of the estuary and the scope of challenges within it necessitate a multidisciplinary approach that includes establishing the regional geology and the estuary’s physical characteristics and modeling how the estuary’s morphology interacts to affect its water quality. This report presents the data collected during this project for use in understanding the morphology and the distribution of sea-floor and sub-sea-floor sediments within Barnegat Bay, describes the methods used to collect and process those data, and includes links to the final processed datasets. These data can be used by scientists to understand the links between geomorphology, geologic framework, sediment transport, and estuarine water quality and circulation.

New Jersey↗
USGS2014

Continuous resistivity profiling and seismic-reflection data collected in April 2010 from Indian River Bay, Delaware

A geophysical survey to delineate the fresh-saline groundwater interface and associated sub-bottom sedimentary structures beneath Indian River Bay, Delaware, was carried out in April 2010. This included surveying at higher spatial resolution in the vicinity of a study site at Holts Landing, where intensive onshore and offshore studies were subsequently completed. The total length of continuous resistivity profiling (CRP) survey lines was 145 kilometers (km), with 36 km of chirp seismic lines surveyed around the perimeter of the bay. Medium-resolution CRP surveying was performed using a 50-meter streamer in a baywide grid. Results of the surveying and data inversion showed the presence of many buried paleochannels beneath Indian River Bay that generally extended perpendicular from the shoreline in areas of modern tributaries, tidal creeks, and marshes. An especially wide and deep paleochannel system was imaged in the southeastern part of the bay near White Creek. Many paleochannels also had high-resistivity anomalies corresponding to low-salinity groundwater plumes associated with them, likely due to the presence of fine-grained estuarine mud and peats in the channel fills that act as submarine confining units. Where present, these units allow plumes of low-salinity groundwater that was recharged onshore to move beyond the shoreline, creating a complex fresh-saline groundwater interface in the subsurface. The properties of this interface are important considerations in construction of accurate coastal groundwater flow models. These models are required to help predict how nutrient-rich groundwater, recharged in agricultural watersheds such as this one, makes its way into coastal bays and impacts surface-water quality and estuarine ecosystems.

Delaware↗
USGS2009

The Partition Intervalometer: A Programmable Underwater Timer for Marking Accumulated Sediment Profiles Collected in Anderson Sediment Traps: Development, Operation, Testing Procedures, and Field Results

This manual illustrates the development of a programmable instrument designed to deploy a series of wafer-shaped discs (partitions) into the collection tube of a sediment trap in various aquatic environments. These hydrodynamically shaped discs are deployed at discrete time intervals from the Intervalometer and provide markers that delineate time intervals within the sediments that accumulate in the collection tube. The timer and mechanical system are lodged in an air-filled, water-tight pressure housing that is vertically hung within the confines of a cone-shaped sediment trap. The instrumentation has been operationally pressure tested to an equivalent water depth of approximately 1 km. Flaws discovered during extensive laboratory and pressure testing resulted in the implementation of several mechanical modifications (such as a redesign of the rotor and the discs) that improved the operation of the rotor assembly as well as the release of discs through the end cap. These results also identified a preferred azimuth placement of the rotor disc relative to the drop hole of the end cap. In the initial field trial, five sediment traps and coupled Intervalometers were attached to moored arrays and deployed at two sites off the coast of Southern California for approximately 8 months. Each of the instruments released 18 discs at the programmed 10 day intervals, except one unit, which experienced a malfunction after approximately 4 months. Most of the discs oriented in a near-horizontal position upon the surface of the sediment in the collection tubes. Sampling of the sediments for geochemical analyses was improved by these clearly defined markers, which indicated the changes in the flux and nature of sediments accumulated during the deployment period of each sediment trap.

Open-File Report↗
USGS2006

Continuous resistivity profiling data from the upper Neuse River Estuary, North Carolina, 2004-2005

The Neuse River Estuary in North Carolina has suffered impacts of eutrophication in recent years. As part of a larger project to better constrain nutrient budgets in the estuary, field investigations were performed to study occurrence and discharge of fresh and brackish ground water and nutrients beneath the estuary itself (fig. 1). A Continuous Resistivity Profiling (CRP) system (Manheim and others, 2004) was used to map the depth of the freshwater-saltwater interface (FSI) in sub-estuarine groundwater. This study area serves as a typological representation of a submarine groundwater environment characteristic of a shallow estuary in a wide coastal plain that has not experienced glaciation. Similar settings extend from New Jersey to Georgia, and along the Gulf of Mexico in the U.S. This report archives 29 lines of data collected during 2004 and 2005 surveys representing almost 210 km of survey lines. These data are further explained in the Data Processing section of the report and previews available of the processed data are available.

North Carolina↗