Geology topics

Edwin Nissen

Publications and source records attributed to Edwin Nissen.

5 recordsLinked to original sources

USGS2023

Discovery of an active forearc fault in an urban region: Holocene rupture on the XEOLXELEK-Elk Lake fault, Victoria, British Columbia, Canada

Subduction forearcs are subject to seismic hazard from upper plate faults that are often invisible to instrumental monitoring networks. Identifying active faults in forearcs therefore requires integration of geomorphic, geologic, and paleoseismic data. We demonstrate the utility of a combined approach in a densely populated region of Vancouver Island, Canada, by combining remote sensing, historical imagery, field investigations, and shallow geophysical surveys to identify a previously unrecognized active fault, the XEOLXELEK-Elk Lake fault, in the northern Cascadia forearc, ∼10 km north of the city of Victoria. Lidar-derived digital terrain models and historical air photos show a ∼2.5-m-high scarp along the surface of a Quaternary drumlinoid ridge. Paleoseismic trenching and electrical resistivity tomography surveys across the scarp reveal a single reverse-slip earthquake produced a fault-propagation fold above a blind southwest-dipping fault. Five geologically plausible chronological models of radiocarbon dated charcoal constrain the likely earthquake age to between 4.7 and 2.3 ka. Fault-propagation fold modeling indicates ∼3.2 m of reverse slip on a blind, 50° southwest-dipping fault can reproduce the observed deformation. Fault scaling relations suggest a M 6.1–7.6 earthquake with a 13 to 73-km-long surface rupture and 2.3–3.2 m of dip slip may be responsible for the deformation observed in the paleoseismic trench. An earthquake near this magnitude in Greater Victoria could result in major damage, and our results highlight the importance of augmenting instrumental monitoring networks with remote sensing and field studies to identify and characterize active faults in similarily challenging environments.

Victoria↗

USGS2022

Paleoseismic study of the XEOLXELEK–Elk Lake fault: A newly identified Holocene fault in thenorthern Cascadia forearc near Victoria, British Columbia, Canada

High-resolution topographic data show a tectonic scarp formed in Quaternary sediments near the city of Victoria in the northern Cascadia forearc on Vancouver Island, British Columbia, Canada. A paleoseismic trench excavation across the structure, the XEOLXELEK–Elk Lake fault, shows evidence for a Holocene (after 12.2 cal ka BP) surface-rupturing reverse-slip earthquake that produced a fault-propagation fold and resulted in the formation of a ∼1.4 to 3.5 m-high scarp. Fault-propagation fold modelling indicates ∼3.2 m of reverse slip on a 50°-dipping fault plane reproduces the observed deformation, and fault-scaling relations suggest a single earthquake rupture with this surface displacement could occur during a ∼Mw 6.1– 7.6 earthquake. Given the fault’s location within the metropolitan area of Victoria, an earthquake near this magnitude would result in significant damage to local infrastructure and this fault is worth considering in future seismic hazard assessments.

Conference Paper↗

USGS2021

Paleoseismic trenching reveals late quaternary kinematics of the Leech River Fault: Implications for forearc strain accumulation in Northern Cascadia

New paleoseismic trenching indicates late Quaternary oblique right‐lateral slip on the Leech River fault, southern Vancouver Island, Canada, and constrains permanent forearc deformation in northern Cascadia. A south‐to‐north reduction in northward Global Navigation Satellite System velocities and seismicity across the Olympic Mountains, Strait of Juan de Fuca (JDF), and the southern Strait of Georgia, has been used as evidence for permanent north–south crustal shortening via thrust faulting between a northward migrating southern forearc and rigid northern backstop in southwestern Canada. However, previous paleoseismic studies indicating late Quaternary oblique right‐lateral slip on west‐northwest‐striking forearc faults north of the Olympic Mountains and in the southern Strait of Georgia are more consistent with forearc deformation models that invoke oroclinal bending and(or) westward extrusion of the Olympic Mountains. To help evaluate strain further north across the Strait of JDF, we present the results from two new paleoseismic trenches excavated across the Leech River fault. In the easternmost Good Hope trench, we document a vertical fault zone and a broad anticline deforming glacial till. Comparison of till clast orientations in faulted and undeformed glacial till shows evidence for postdeposition faulted till clast rotation, indicating strike‐slip shear. The orientation of opening mode fissuring during surface rupture is consistent with right‐lateral slip and the published regional S H max "> S H max SHmax directions. Vertical separation and the formation of scarp‐derived colluvium along one fault also indicate a dip‐slip component. Radiocarbon charcoal dating within offset glacial till and scarp‐derived colluvium suggest a single surface rupturing earthquake at 9.4 ± 3.4    ka "> 9.4 ± 3.4 ka 9.4±3.4 ka ⁠ . The oblique right‐lateral slip sense inferred in the Good Hope trench is consistent with slip kinematics observed on other regional west‐northwest‐striking faults and indicates that these structures do not accommodate significant north–south shortening via thrust faulting.

Washington↗

USGS2019

The 12 November 2017 Mw 7.3 Ezgeleh–Sarpolzahab (Iran) earthquake and active tectonics of the Lurestan arc

The 12 November 2017 M w 7.3 Ezgeleh‐Sarpolzahab earthquake is the largest instrumentally recorded earthquake in the Zagros Simply Folded Belt by a factor of ∼10 in seismic moment. Exploiting local, regional, and teleseismic data and synthetic aperture radar interferometry imagery, we characterize the rupture, its aftershock sequence, background seismicity, and regional tectonics. The mainshock ruptured slowly (∼2 km/s), unilaterally southward, for ∼40 km along an oblique (dextral‐thrust) fault that dips ∼14°E beneath the northwestern Lurestan arc. Slip is confined to basement depths of ∼12–18 km, resolvably beneath the sedimentary cover which is ∼8 km thick in this area. The gentle dip angle and basement location allow for a broad slip area, explaining the large magnitude relative to earthquakes in the main Fars arc of the Zagros, where shallower, steeper faults are limited in rupture extent by weak sedimentary layers. Early aftershocks concentrate around the southern and western edges of the mainshock slip area and therefore cluster in the direction of rupture propagation, implying a contribution from dynamic triggering. A cluster of events ∼100 km to the south near Mandali (Iraq) reactivated the ∼50° dipping Zagros Foredeep Fault. The basement fault responsible for the Ezgeleh‐Sarpolzahab earthquake probably accounts for the ∼1 km elevation contrast between the Lurestan arc and the Kirkuk embayment but is distinct from sections of the Mountain Front Fault that define frontal escarpments elsewhere in the Zagros. It may be related to a seismic interface underlying the central and southern Lurestan arc, and a key concern is whether or not the more extensive regional structure is also seismogenic.

Journal of Geophysical Research: Solid Earth↗

USGS2014

Rapid mapping of ultrafine fault zone topography with structure from motion

Structure from Motion (SfM) generates high-resolution topography and coregistered texture (color) from an unstructured set of overlapping photographs taken from varying viewpoints, overcoming many of the cost, time, and logistical limitations of Light Detection and Ranging (LiDAR) and other topographic surveying methods. This paper provides the first investigation of SfM as a tool for mapping fault zone topography in areas of sparse or low-lying vegetation. First, we present a simple, affordable SfM workflow, based on an unmanned helium balloon or motorized glider, an inexpensive camera, and semiautomated software. Second, we illustrate the system at two sites on southern California faults covered by existing airborne or terrestrial LiDAR, enabling a comparative assessment of SfM topography resolution and precision. At the first site, an ∼0.1 km 2 alluvial fan on the San Andreas fault, a colored point cloud of density mostly >700 points/m 2 and a 3 cm digital elevation model (DEM) and orthophoto were produced from 233 photos collected ∼50 m above ground level. When a few global positioning system ground control points are incorporated, closest point vertical distances to the much sparser (∼4 points/m 2 ) airborne LiDAR point cloud are mostly <3 cm. The second site spans an ∼1 km section of the 1992 Landers earthquake scarp. A colored point cloud of density mostly >530 points/m 2 and a 2 cm DEM and orthophoto were produced from 450 photos taken from ∼60 m above ground level. Closest point vertical distances to existing terrestrial LiDAR data of comparable density are mostly <6 cm. Each SfM survey took ∼2 h to complete and several hours to generate the scene topography and texture. SfM greatly facilitates the imaging of subtle geomorphic offsets related to past earthquakes as well as rapid response mapping or long-term monitoring of faulted landscapes.

California↗