Search USGS⌕ Search

Geology topics

E. Safak

Publications and source records attributed to E. Safak.

At least 19 recordsLinked to original sources
USGS2006

Time-domain representation of frequency-dependent foundation impedance functions

Foundation impedance functions provide a simple means to account for soil-structure interaction (SSI) when studying seismic response of structures. Impedance functions represent the dynamic stiffness of the soil media surrounding the foundation. The fact that impedance functions are frequency dependent makes it difficult to incorporate SSI in standard time-history analysis software. This paper introduces a simple method to convert frequency-dependent impedance functions into time-domain filters. The method is based on the least-squares approximation of impedance functions by ratios of two complex polynomials. Such ratios are equivalent, in the time-domain, to discrete-time recursive filters, which are simple finite-difference equations giving the relationship between foundation forces and displacements. These filters can easily be incorporated into standard time-history analysis programs. Three examples are presented to show the applications of the method.

Soil Dynamics and Earthquake Engineering↗
USGS2006

Extracting the building response using seismic interferometry: Theory and application to the Millikan Library in Pasadena, California

The motion of a building depends on the excitation, the coupling of the building to the ground, and the mechanical properties of the building. We separate the building response from the excitation and the ground coupling by deconvolving the motion recorded at different levels in the building and apply this to recordings of the motion in the Robert A. Millikan Library in Pasadena, California. This deconvolution allows for the separation of instrinsic attenuation and radiation damping. The waveforms obtained from deconvolution with the motion in the top floor show a superposition of one upgoing and one downgoing wave. The waveforms obtained by deconvolution with the motion in the basement can be formulated either as a sum of upgoing and downgoing waves, or as a sum over normal modes. Because these deconvolved waves for late time have a monochromatic character, they are most easily analyzed with normal-mode theory. For this building we estimate a shear velocity c = 322 m/sec and a quality factor Q = 20. These values explain both the propagating waves and the normal modes.

Bulletin of the Seismological Society of America↗
USGS2005

Earthquake and ambient vibration monitoring of the steel-frame UCLA factor building

Dynamic property measurements of the moment-resisting steel-frame University of California, Los Angeles, Factor building are being made to assess how forces are distributed over the building. Fourier amplitude spectra have been calculated from several intervals of ambient vibrations, a 24-hour period of strong winds, and from the 28 March 2003 Encino, California (ML = 2.9), the 3 September 2002 Yorba Linda, California (ML = 4.7), and the 3 November 2002 Central Alaska (Mw = 7.9) earthquakes. Measurements made from the ambient vibration records show that the first-mode frequency of horizontal vibration is between 0.55 and 0.6 Hz. The second horizontal mode has a frequency between 1.6 and 1.9 Hz. In contrast, the first-mode frequencies measured from earthquake data are about 0.05 to 0.1 Hz lower than those corresponding to ambient vibration recordings indicating softening of the soil-structure system as amplitudes become larger. The frequencies revert to pre-earthquake levels within five minutes of the Yorba Linda earthquake. Shaking due to strong winds that occurred during the Encino earthquake dominates the frequency decrease, which correlates in time with the duration of the strong winds. The first shear wave recorded from the Encino and Yorba Linda earthquakes takes about 0.4 sec to travel up the 17-story building. ?? 2005, Earthquake Engineering Research Institute.

Earthquake Spectra↗
USGS2005

Assessment of seismic risk in Tashkent, Uzbekistan and Bishkek, Kyrgyz Republic

The impact of earthquakes in urban centers prone to disastrous earthquakes necessitates the analysis of associated risk for rational formulation of contingency plans and mitigation strategies. In urban centers the seismic risk is best quantified and portrayed through the preparation of 'Earthquake damage and Loss Scenarios'. The components of such scenarios are the assessment of the hazard, inventories and the vulnerabilities of elements at risk. For the development of earthquake risk scenario in Tashkent-Uzbekistan and Bishkek-Kyrgyzstan an approach based on spectral displacements is utilized. This paper will present the important features of a comprehensive study, highlight the methodology, discuss the results and provide insights to the future developments. ?? 2005 Elsevier Ltd. All rights reserved.

Soil Dynamics and Earthquake Engineering↗
USGS2003

Hilbert-Huang transform analysis of dynamic and earthquake motion recordings

This study examines the rationale of Hilbert-Huang transform (HHT) for analyzing dynamic and earthquake motion recordings in studies of seismology and engineering. In particular, this paper first provides the fundamentals of the HHT method, which consist of the empirical mode decomposition (EMD) and the Hilbert spectral analysis. It then uses the HHT to analyze recordings of hypothetical and real wave motion, the results of which are compared with the results obtained by the Fourier data processing technique. The analysis of the two recordings indicates that the HHT method is able to extract some motion characteristics useful in studies of seismology and engineering, which might not be exposed effectively and efficiently by Fourier data processing technique. Specifically, the study indicates that the decomposed components in EMD of HHT, namely, the intrinsic mode function (IMF) components, contain observable, physical information inherent to the original data. It also shows that the grouped IMF components, namely, the EMD-based low- and high-frequency components, can faithfully capture low-frequency pulse-like as well as high-frequency wave signals. Finally, the study illustrates that the HHT-based Hilbert spectra are able to reveal the temporal-frequency energy distribution for motion recordings precisely and clearly.

Journal of Engineering Mechanics↗
USGS2002

Site effects in Avcilar, West of Istanbul, Turkey, from strong- and weak-motion data

Approximately 1000 people were killed in the collapse of buildings in Istanbul, Turkey, during the 17 August 1999 I??zmit earthquake, whose epicenter was roughly 90 km east of the city. Most of the fatalities and damage occurred in the suburb of Avcilar that is 20 km further west of the epicenter than the city proper. To investigate this pattern of damage, the U.S. Geological Survey, in cooperation with the Kandilli Observatory and Earthquake Research Institute (KOERI), deployed portable digital seismographs at seven free-field sites in western Istanbul, to record aftershocks during the period from 24 August to 2 September. The primary objective of this deployment was to study the site effects by comparing the aftershock ground motions recorded at sites inside and outside the damaged area, and to correlate site effects with the distribution of the damaged buildings. In addition to using weak-motion data, mainshock and aftershock acceleration records from the KOERI permanent strong-motion array were also used in estimating the site effects. Site effects were estimated using S waves from both types of records. For the weak-motion data set, 22 events were selected according to the criteria of signal-to-noise ratio (S/N ratio) and the number of stations recording the same event. The magnitudes of these events ranged from 3.0 to 5.2. The acceleration data set consisted of 12 events with magnitudes ranging from 4.3 to 5.8 and included two mainshock events. Results show that the amplifying frequency band is, in general, less than 4 Hz, and the physical properties of the geologic materials are capable of amplifying the motions by a factor of 5-10. In this frequency band, there is a good agreement among the spectral ratios obtained from the two mainshocks and their aftershocks. The damage pattern for the 17 August I??zmit earthquake is determined by several factors. However, our study suggests that the site effects in Avcilar played an important role in contributing to the damage.

Bulletin of the Seismological Society of America↗
USGS1999

Wave-propagation formulation of seismic response of multistory buildings

This paper presents a discrete-time wave-propagation method to calculate the seismic response of multistory buildings, founded on layered soil media and subjected to vertically propagating shear waves. Buildings are modeled as an extension of the layered soil media by considering each story as another layer in the wave-propagation path. The seismic response is expressed in terms of wave travel times between the layers and wave reflection and transmission coefficients at layer interfaces. The method accounts for the filtering effects of the concentrated foundation and floor masses. Compared with commonly used vibration formulation, the wave-propagation formulation provides several advantages, including simplicity, improved accuracy, better representation of damping, the ability to incorporate the soil layers under the foundation, and providing better tools for identification and damage detection from seismic records. Examples are presented to show the versatility and the superiority of the method.

Journal of Structural Engineering↗
USGS1998

New approach to analyzing soil-building systems

A new method of analyzing seismic response of soil-building systems is introduced. The method is based on the discrete-time formulation of wave propagation in layered media for vertically propagating plane shear waves. Buildings are modeled as an extension of the layered soil media by assuming that each story in the building is another layer. The seismic response is expressed in terms of wave travel times between the layers, and the wave reflection and transmission coefficients at layer interfaces. The calculation of the response is reduced to a pair of simple finite-difference equations for each layer, which are solved recursively starting from the bedrock. Compared with commonly used vibration formulation, the wave propagation formulation provides several advantages, including the ability to incorporate soil layers, simplicity of the calculations, improved accuracy in modeling the mass and damping, and better tools for system identification and damage detection.A new method of analyzing seismic response of soil-building systems is introduced. The method is based on the discrete-time formulation of wave propagation in layered media for vertically propagating plane shear waves. Buildings are modeled as an extension of the layered soil media by assuming that each story in the building is another layer. The seismic response is expressed in terms of wave travel times between the layers, and the wave reflection and transmission coefficients at layer interfaces. The calculation of the response is reduced to a pair of simple finite-difference equations for each layer, which are solved recursively starting from the bedrock. Compared with commonly used vibration formulation, the wave propagation formulation provides several advantages, including the ability to incorporate soil layers, simplicity of the calculations, improved accuracy in modeling the mass and damping, and better tools for system identification and damage detection.

Soil Dynamics and Earthquake Engineering↗
USGS1998

Propagation of seismic waves in tall buildings

A discrete-time wave propagation formulation of the seismic response of tall buildings is introduced. The building is modeled as a layered medium, similar to a layered soil medium, and is subjected to vertically propagating seismic shear waves. Soil layers and the bedrock under the foundation are incorporated in the formulation as additional layers. Seismic response is expressed in terms of the wave travel times between the layers, and the wave reflection and transmission coefficients at the layer interfaces. The equations account for the frequency-dependent filtering effects of the foundation and floor masses. The calculation of seismic response is reduced to a pair of simple finite-difference equations for each layer, which can be solved recursively starting from the bedrock. Compared to the commonly used vibration formulation, the wave propagation formulation provides several advantages, including simplified calculations, better representation of damping, ability to account for the effects of the soil layers under the foundation, and better tools for identification and damage detection from seismic records. Examples presented show the versatility of the method. ?? 1998 John Wiley & Sons, Ltd.

Structural Design of Tall Buildings↗
USGS1997

Models and methods to characterize site amplification from a pair of records

The paper presents a tutorial review of the models and methods that are used to characterize site amplification from the pairs of rock- and soil-site records, and introduces some new techniques with better theoretical foundations. The models and methods discussed include spectral and cross-spectral ratios, spectral ratios for downhole records, response spectral ratios, constant amplification factors, parametric models, physical models, and time-varying filters. An extensive analytical and numerical error analysis of spectral and cross-spectral ratios shows that probabilistically cross-spectral ratios give more reliable estimates of site amplification. Spectral ratios should not be used to determine site amplification from downhole-surface recording pairs because of the feedback in the downhole sensor. Response spectral ratios are appropriate for low frequencies, but overestimate the amplification at high frequencies. The best method to be used depends on how much precision is required in the estimates.

Earthquake Spectra↗
USGS1996

New USGS seismic hazard maps for the United States

The US Geological Survey (USGS) is preparing new seismic national maps for release in April 1996. The new maps plot probabilistic ground motions for return times of about 500, 1000, and 2500 years. Deterministic (scenario) ground-motion maps are being prepared for selected faults in the western US. Due to the diversity of tectonic settings in the US, mapping methodologies for different regions had to be modified. A four-model approach is used to eliminate the need for drawing seismic source zones to determine seismic activity levels. A logic tree approach is used to incorporate alternative models of seismic hazard and alternative relations of seismic attenuation.

Conference Paper↗
USGS1994

Structural response to 3D simulated earthquake motions in San Bernardino Valley

Structural repsonse to one- and three-dimensional (3D) simulated motions in San Bernardino Valley from a hypothetical earthquake along the San Andreas fault with moment magnitude 6.5 and rupture length of 30km is investigated. The results show that the ground motions and the structural response vary dramatically with the type of simulation and the location. -from Authors

Journal of Structural Engineering↗
USGS1993

Response of a 42-storey steel-frame building to the Ms = 7.1 Loma Prieta earthquake

A set of 14 acceleration records was obtained from a 42-storey steel-frame building, the Chevron Building, in San Francisco during the M s = 7.1 "> M s = 7.1 Loma Prieta earthquake of 17 October 1989. Data were analysed using a system identification method based on the discretetime linear filtering, and the least-squares estimation techniques. The results show that the response of the building is dominated by two modes: a translational mode in the weaker (southwest-northeast) principal direction of the building at 0.16 Hz with 5% damping, and a translational-torsional mode along the east-west diagonal of the building's cross-section at 0.20 Hz with 7% damping. There are significant contributions from higher modes at 0.54 Hz, 0.62 Hz, 1.02 Hz and 1.09 Hz. All the modes incorporate some torsion, but the amplitudes of torsional components are small, about 10% of translational amplitudes. Soil-structure interaction influences the vibrations near 1.0 Hz. The contribution of soil-structure interaction to the peak displacements of the building is significant, particularly at lower floors.

California↗
USGS1992

Seismic response of Pacific Park Plaza. I. Data and preliminary analysis

The objective of this paper is to present analyses of a set of acceleration response records obtained during the October 17, 1989 Loma Prieta earthquake (Ms = 7.1) from the 30-story, three-winged, ductile moment-resistant reinforced-concrete-framed Pacific Park Plaza Building, located in Emeryville, east of San Francisco, Calif. The building was constructed in 1983, and instrumented in 1985 with 21 channels of synchronized uniaxial accelerometers deployed throughout the structure, and three channels of accelerometers located at free-field outside on the north side of the building, all connected to a central recording system. In addition, a triaxial strong-motion accelerograph is deployed at free-field on the south side of the building. The predominant response modes of the building and the associated frequencies at approximately 0.4 Hz and 1.0 Hz are identified visually from the unprocessed records, and also from Fourier amplitude spectra of the processed records, which, as expected, reveal significant torsional motion. In addition, the response spectra of the free-field and basement motions are very similar. These spectra show that significant structural resonances at higher modes influence both the ground level and the free-field motions, thus rising the question as to the definition of free-field motion, at least at this site. This part of the paper includes the preliminary analyses of the data acquired from this building. Part 2 of the paper provides detailed analyses of the data using system identification techniques.

Journal of Structural Engineering↗
USGS1991

Torsional response of unique building

Acceleration response records obtained during the October 1, 1987 Whittier‐Narrows earthquake ( M s = 5.6 ) "> ( M s = 5.6 ) from the 32‐story, vertically irregular 1100 Wilshire Finance Building, of which the cross section changes from a nominally rectangular shape to a triangular one, are analyzed. The building was instrumented with 21 channels of synchronized sensors, consisting of 12 uniaxial accelerometers deployed throughout the superstructure and connected to a central recording system and three triaxial strong‐motion accelerographs in the basement. At each of the four levels of the superstructure, three uniaxial accelerometers were deployed, two parallel and at a distance apart, and the third one orthogonal to the parallel pair. The records permit the identification of the predominantly coupled torsional‐translational response of the building and the associated frequency at approximately 0.7–0.8 Hz from the difference between accelerations recorded by the parallel pairs of accelerometers at different levels. This mode corresponds to the second torsional mode. A translational mode at 0.3 Hz is also identified from the records. The center of rigidity of any instrumented level is identified by minimizing the coherence between the relative accelerations and the translational acceleration. Employing system identification techniques provides the modal damping percentage for the second torsional mode as 6–7%.

California↗