Search USGS⌕ Search

Geology topics

E. L. Rowan

Publications and source records attributed to E. L. Rowan.

17 recordsLinked to original sources
USGS2022

Infiltration of late Palaeozoic evaporative brines in the reelfoot rift: A possible salt source for Illinois Basin formation waters and MVT mineralizing fluids

Salinities and homogenization temperatures of fluid inclusions in Mississippi Valley-type (MVT) deposits provide important insights into the regional hydrology of the Illinois basin/Reelfoot rift system in late Palaeozoic time. Although the thermal regime of this basin system has been plausibly explained, the origin of high salinities in the basin fluids remains enigmatic. Topographically driven flow appears to have been essential in forming these MVT districts, as well as many other districts worldwide. However, this type of flow is recharged by fresh water making it difficult to account for the high salinities of the mineralizing fluids over extended time periods. Results of numerical experiments carried out in this study provide a possible solution to the salinity problem presented by the MVT zinc-lead and fluorite districts at the margins of the basin system. Evaporative concentration of surface water and subsequent infiltration into the subsurface are proposed to account for large volumes of brine that are ultimately responsible for mineralization of these districts. This study demonstrates that under a range of geologically reasonable conditions, brine infiltration into an aquifer in the deep subsurface can coexist with topographically driven flow. Infiltration combined with regional flow and local magmatic heat sources in the Reelfoot rift explain the brine concentrations as well as the temperatures observed in the Southern Illinois and Upper Mississippi Valley districts.

Petroleum Geoscience↗
USGS2016

Widespread detection of highly pathogenic H5 influenza viruses in wild birds from the Pacific Flyway of the United States

A novel highly pathogenic avian influenza virus belonging to the H5 clade 2.3.4.4 variant viruses was detected in North America in late 2014. Motivated by the identification of these viruses in domestic poultry in Canada, an intensive study was initiated to conduct highly pathogenic avian influenza surveillance in wild birds in the Pacific Flyway of the United States. A total of 4,729 hunter-harvested wild birds were sampled and highly pathogenic avian influenza virus was detected in 1.3% (n = 63). Three H5 clade 2.3.4.4 subtypes were isolated from wild birds, H5N2, H5N8, and H5N1, representing the wholly Eurasian lineage H5N8 and two novel reassortant viruses. Testing of 150 additional wild birds during avian morbidity and mortality investigations in Washington yielded 10 (6.7%) additional highly pathogenic avian influenza isolates (H5N8 = 3 and H5N2 = 7). The geographically widespread detection of these viruses in apparently healthy wild waterfowl suggest that the H5 clade 2.3.4.4 variant viruses may behave similarly in this taxonomic group whereby many waterfowl species are susceptible to infection but do not demonstrate obvious clinical disease. Despite these findings in wild waterfowl, mortality has been documented for some wild bird species and losses in US domestic poultry during the first half of 2015 were unprecedented.

Pacific Flyway↗
USGS2012

Radon-222 content of natural gas samples from Upper and Middle Devonian sandstone and shale reservoirs in Pennsylvania—preliminary data

Samples of natural gas were collected as part of a study of formation water chemistry in oil and gas reservoirs in the Appalachian Basin. Nineteen samples (plus two duplicates) were collected from 11 wells producing gas from Upper Devonian sandstones and the Middle Devonian Marcellus Shale in Pennsylvania. The samples were collected from valves located between the wellhead and the gas-water separator. Analyses of the radon content of the gas indicated 222Rn (radon-222) activities ranging from 1 to 79 picocuries per liter (pCi/L) with an overall median of 37 pCi/L. The radon activities of the Upper Devonian sandstone samples overlap to a large degree with the activities of the Marcellus Shale samples.

Pennsylvania↗
USGS2011

Radium content of oil- and gas-field produced waters in the northern Appalachian Basin (USA): Summary and discussion of data

Radium activity data for waters co-produced with oil and gas in New York and Pennsylvania have been compiled from publicly available sources and are presented together with new data for six wells, including one time series. When available, total dissolved solids (TDS), and gross alpha and gross beta particle activities also were compiled. Data from the 1990s and earlier are from sandstone and limestone oil/gas reservoirs of Cambrian-Mississippian age; however, the recent data are almost exclusively from the Middle Devonian Marcellus Shale. The Marcellus Shale represents a vast resource of natural gas the size and significance of which have only recently been recognized. Exploitation of the Marcellus involves hydraulic fracturing of the shale to release tightly held gas. Analyses of the water produced with the gas commonly show elevated levels of salinity and radium. Similarities and differences in radium data from reservoirs of different ages and lithologies are discussed. The range of radium activities for samples from the Marcellus Shale (less than detection to 18,000 picocuries per liter (pCi/L)) overlaps the range for non-Marcellus reservoirs (less than detection to 6,700 pCi/L), and the median values are 2,460 pCi/L and 734 pCi/L, respectively. A positive correlation between the logs of TDS and radium activity can be demonstrated for the entire dataset, and controlling for this TDS dependence, Marcellus shale produced water samples contain statistically more radium than non-Marcellus samples. The radium isotopic ratio, Ra-228/Ra-226, in samples from the Marcellus Shale is generally less than 0.3, distinctly lower than the median values from other reservoirs. This ratio may serve as an indicator of the provenance or reservoir source of radium in samples of uncertain origin.

Pennsylvania;New York↗
USGS2002

Regional fluid flow as a factor in the thermal history of the Illinois basin: Constraints from fluid inclusions and the maturity of Pennsylvanian coals

Vitrinite reflectance measurements on Pennsylvanian coals in the Illinois basin indicate significantly higher thermal maturity than can be explained by present-day burial depths. An interval of additional sedimentary section, now removed by erosion, has been suggested to account for the discrepancy. Although burial could indeed account for the observed maturity levels of organic matter, fluid-inclusion temperatures provide a stringent additional constraint. In this article, we combine measurements of coal maturity with fluid-inclusion temperatures from three sites to constrain the basin's thermal and burial history: the Fluorspar district at the Illinois basin's southern margin, the Upper Mississippi Valley zinc district at the basin's northern margin, and a north-central location. Two-dimensional numerical modeling of a north-south cross section through the basin tests scenarios both with and without regional fluid flow. Vitrinite reflectance values can be matched assuming burial by 1.8-2.8 km of southward-thickening additional, post-Pennsylvanian sedimentary section. In the central and northern Illinois basin, however, these burial depths and temperatures are not sufficient to account for the fluid-inclusion data. To account for both parameters with burial alone does not appear feasible. In contrast, our best hypothesis assumes a wedge of post-Pennsylvanian sediment-thickening southward to about 1.2 km and a brief period of magmatism in the Fluorspar district. Significant advective heat redistribution by northward regional fluid flow accounts for fluid-inclusion temperatures and coal maturities throughout the basin. The modeling results demonstrate the potential contribution of advective heat transport to the thermal history of the Illinois basin.

Illinois, Indiana, Kentucky↗
USGS1997

Evidence for hot Mississippi Valley-type brines in the Reelfoot Rift complex, south-central United States, in Late Pennsylvanian-Early Permian

Petrographic and fluid inclusion studies of sparry dolomite cement from Upper Cambrian to Lower Ordovician rocks and conodont thermal-alteration indices provide evidence that hot mississippi valley-type brines were once present in the Reelfoot Rift complex. The cathodoluminescent microstratigraphy of sparry dolomite cement in the Reelfoot Rift resembles that of sparry dolomite cement associated with widespread mississippi valley-type deposition in the Ozark region. If correlative cathodoluminescent zones in the sparry dolomite from the Ozark and Reelfoot Rift regions indicate broadly contemporaneous dolomite deposition, then the results show that the Ozark MVT-type hydrothermal system extended into the Reelfoot region and onto the western flank of the Nashville Dome. Independent evidence supports migration of MVT-type brines into the Ozark region from the Reelfoot Rift complex in late Paleozoic time.

Professional Paper↗
USGS1995

Duration of mineralization and fluid-flow history of the Upper Mississippi Valley zinc-lead district

Studies of fluid inclusions in sphalerite and biomarkers from the Upper Mississippi Valley zinc district show homogenization temperatures to be primarily between 90 and 150 ° C, yet show relatively low levels of thermal maturity. We use numerical calculations to simulate fluid and heat flow through fracture-controlled ore zones and heat transfer to the adjacent rocks. Combining a best-fit path through fluid-inclusion data with measured thermal alteration of biomarkers, we calculated the time interval during which mineralizing fluids circulated through the Upper Mississippi Valley district to be on the order of 200 ka. Cambrian and Ordovician aquifers underlying the district, principally the St. Peter and Mt. Simon Sandstones, were the source of the mineralizing fluid. The duration of mineralization thus reflects the fluid-flow history of these regional aquifers.

Geology↗
USGS1994

Chemical reaction path modeling of ore deposition in Mississippi Valley-type Pb-Zn deposits of the Ozark region, US midcontinent

The Ozark region of the U.S. midcontinent is host to a number of Mississippi Valley-type districts, including the world-class Viburnum Trend, Old Lead Belt, and Tri-State districts and the smaller Southeast Missouri barite, Northern Arkansas, and Central Missouri districts. There is increasing evidence that the Ozark Mississippi Valley-type districts formed locally within a large, interconnected hydrothermal system that also produced broad fringing areas of trace mineralization, extensive subtle hydrothermal alteration, broad thermal anomalies, and regional deposition of hydrothermal dolomite cement. The fluid drive was provided by gravity flow accompanying uplift of foreland thrust belts during the Late Pennsylvanian to Early Permian Ouaehita orogeny.In this study, we use chemical speciation and reaction path calculations, based on quantitative chemical analyses of fluid inclusions, to constrain likely hydrothermal brine compositions and to determine which precipitation mechanisms are consistent with the hydrothermal mineral assemblages observed regionally and locally within each Mississippi Valley-type district in the Ozark region. Deposition of the regional hydrothermal dolomite cement with trace sulfides likely occurred in response to near-isothermal effervescence of CO 2 from basinal brines as they migrated to shallower crustal levels and lower confining pressures. In contrast, our calculations indicate that no one depositional process can reproduce the mineral assemblages and proportions of minerals observed in each Ozark ore district; rather, individual districts require specific depositional mechanisms that reflect the local host-rock composition, structural setting, and hydrology.Both the Northern Arkansas and Tri-State districts are localized by normal faults that likely allowed brines to rise from deeper Cambrian-Ordovician dolostone aquifers into shallower carbonate sequences dominated by limestones. In the Northern Arkansas district, jasperoid preferentially replaced limestones in the mixed dolostone-limestone sedimentary packages. Modeling results indicate that the ore and alteration assemblages in the Tri-State and Northern Arkansas districts resulted from the flow of initially dolomite-saturated brines into cooler limestones. Adjacent to fluid conduits where water/rock ratios were the highest, the limestone was replaced by dolomite. As the fluids moved outward into cooler limestone, jasperoid and sulfide replaced limestone. Isothermal boiling of the ore fluids may have produced open-space filling of hydrothermal dolomite with minor sulfides in breccia and fault zones. Local mixing of the regional brine with locally derived sulfur undoubtedly played a role in the development of sulfide-rich ore runs.Sulfide ores of the Central Missouri district are largely open-space filling of sphalerite plus minor galena in dolostone karst features localized along a broad anticline. Hydrothermal solution collapse during ore deposition was a minor process, indicating dolomite was slightly undersaturated during ore deposition. No silicification and only minor hydrothermal dolomite is present in the ore deposits. The reaction path that best explains the features of the Central Missouri sulfide deposits is the near-isothermal mixing of two dolomite-saturated fluids with different H 2 S and metal contents. Paleokarst features may have allowed the regional brine to rise stratigraphically and mix with locally derived, H 2 S-rich fluids. The Viburnum Trend and Old Lead Belt ores are galena rich with lesser amounts of sphalerite; they replace the most permeable dolostone facies in the Bonneterre Dolomite. Hydrothermal dissolution of host dolostone was concurrent with sulfide deposition, but dolomite deposition occurred episodically between periods of sulfide deposition. The important ore controls in these districts are a variety of sedimentary and geologic features that allowed cross-stratigraphic fluid flow and provided opportunities for fluid mixing. The reaction path which best reproduces the broad features of the Viburnum Trend and Old Lead Belt ores is one in which a dolomite-saturated, lead-rich, zinc- and H 2 S-poor brine mixes with a less saline, H 2 S-rich fluid. The brine became enriched in K, Mg, and Pb and depleted in H 2 S as it flowed through sandstone and redbed aquifers prior to entering the district. This mixing model is consistent with the abundant fluid inclusion and stable isotope evidence for fluid mixing in the districts. Small amounts of cooling associated with the mixing may have contributed to sulfide deposition.

Alabama, Arkansas, Illinois, Indiana, Kansas, Kent↗
USGS1991

Strontium isotopic constraints on the origin of ore-forming fluids of the Viburnum Trend, southeast Missouri

We have measured 87 Sr 86 Sr "> 87Sr86Sr and Rb and Sr concentrations in several minerals, primarily sulfides, spanning the paragenesis of hydrothermal mineralization in the Viburnum Trend in southeast Missouri. Separate measurements were made for fluid inclusions opened by crushing or thermal decrepitation and for the solids. For comparison, measurements were also made on samples of probable local aquifers, the Bonneterre Formation and the Lamotte Sandstone. For some of the samples, concentrations of K, Ca, Cl, Na, and Mg are also reported. In several cases 87 Sr 86 Sr ratios "> 87Sr86Srratios are different (higher) in the solids than in the fluid inclusions. We have investigated the possibility that either type of sample gives spurious results, e.g., that the fluid inclusions are secondary or contaminated by host dolomite, or that Sr in the solids reflects a detrital rather than an authigenic source. Consideration of mass balance, overall solute chemistry, and examination of non-sulfide dissolution residue, however, suggests that both types of sample reflect primary fluid Sr composition. We thus adopt the working hypothesis that Sr isotopic composition in fluids at the time of hydrothermal mineralization was highly variable. The observed results for the Viburnum Trend do not conform well to expected trends for Mississippi Valley-type (MVT) mineralization based primarily on analyses of gangue carbonates, barite, and fluorite. Fluid inclusion Sr in some of the Viburnum Trend samples is more radiogenic than in the host dolomite but only moderately so; in other samples, notably main-stage octahedral galena, fluid inclusion Sr composition is within the range observed for the host dolomite. In contrast, Sr in some of the sulfides is very radiogenic, much more so than previously reported for MVT minerals, and is very radiogenic early in the paragenesis (pyrite, chalcopyrite, sphalerite), less radiogenic during main-stage ore deposition, and again more radiogenic in later paragenetic stages.

Geochimica et Cosmochimica Acta↗
USGS1991

Origin of late dolomite cement by CO2-saturated deep basin brines: evidence from the Ozark region, central United States

Studies of fluid inclusions in regionally extensive late dolomite cement (LDC) throughout the Ozark region show that CO 2 effervescence was widespread during dolomite precipitation. On the basis of quantitative analyses of inclusion fluids, reaction-path modeling shows that LDC with trace amounts of sulfides can be deposited by effervescence of a CO 2 -saturated basin brine as it migrates to shallower levels and lower confining pressures. This precipitation mechanism best explains occurrences of LDC in the Ozark region and may account for LDC found in sedimentary basins worldwide.

Geology↗
USGS1989

Constraints from fluid inclusions on sulfide precipitation mechanisms and ore fluid migration in the Viburnum Trend lead district, Missouri

Measurements on fluid inclusions in hydrothermal dolomite cements place constraints on sulfide precipitation mechanisms and on the thermal-hydrologic processes which formed the Viburnum Trend Mississippi Valley-type lead district. Homogenization temperatures and freezing point depressions were determined for fluid inclusions in Bonneterre Dolomite-hosted dolomite cements in mine samples, as well as drill core from up to 13 km outside of the district. A well-defined cathodoluminescent zonation distinguishes dolomite growth zones in the Vi-burnurn Trend as older or younger than main-stage mineralization (octahedral galena) and facilitates correlation with other dolomites outside the Viburnum Trend.Homogenization temperatures and salinities in samples from mines are not systematically different from those of samples outside of the district. Medians of homogenization temperature distributions differ by not more than 25 degrees C, so that a temperature gradient, if present, should not have exceeded approximately 25 degrees C within the study area. These observations are interpreted to indicate that the Viburnum Trend was not strongly thermally anomalous with respect to surrounding country rock and that fluid flow occurred on a broad scale through not only the Lamotte Sandstone but through the overlying Cambrian carbonates as well.The absence of a significant, recognizable decrease in temperature either vertically within the section or east-west across the district, coupled with the minor amount of silica in the district, argues against cooling as a primary cause of sulfide precipitation. Fluids whose primary aquifer was the Lamotte Sandstone, predominantly a quartz arenite, should have been in equilibrium with quartz. Quartz in the Viburnum Trend occurs as a minor, drusy, vug-lining phase, but the district lacks the intense silicification found in other Mississippi Valley-type districts such as Tri-State (Oklahoma, Kansas, Missouri). Quartz solubility is strongly temperature dependent and, under equilibrium conditions, a decrease of 10 degrees C or more should have precipitated at least as many moles of silica as galena (assuming a galena solubility of between 1 and 10 ppm). Clearly this is not the case, as galena is far more abundant than quartz in the Viburnum Trend.Ice final-melting temperatures (T m ) in fluid inclusions generally range from -14 degrees to -27 degrees C for primary dolomite-hosted inclusions. Using these T m values and cation ratios for the inclusion fluids, absolute concentrations for the individual cations and chloride were calculated using the thermochemical model of Spencer et al. (1990). The corresponding high but variable salinities, 3.9 to 5.9 chloride molality, are evidence for the presence of more than one distinct fluid during mineralization.In a reduced sulfur mineralization model with Pb carried as chloride complexes, dilution is also a possible sulfide precipitation mechanism. The difference in Pb solubility (for an equal quantity of reduced sulfur) in the extremes of the chloride concentration range, 3.9 vs. 5.9 molal, reaches 1 ppm only for pH values below approximately 4.5. Accepting 1 ppm as a minimum metal concentration for a viable ore-forming fluid, dilution only appears capable of precipitating sulfides in a fluid with pH near the lower limit of values considered geologically reasonable or attainable.Dolomite cements hosting warm (approximately 105 degrees -125 degrees C) saline fluid inclusions are ubiquitous in the porous dolomitic facies of the Bonneterre Dolomite. Based on stratigraphic reconstructions, however, it is unlikely that the Bonneterre was buried deeper than 1.5 km. The distribution of warm inclusions beyond the Viburnum Trend district implies that fluid migration was regional in scale. Fluid inclusion temperatures inconsistent with typical basement heat-flow-controlled geothermal gradients (25 degrees -35 degrees C/km) may be explained by long-distance migration of warm, basin-derived brines. Elevated temperatures observed in fluid inclusions at shallow stratigraphic depths are consistent with a gravity flow hydrologic system characterized by rapid flow rates and the capacity for advective heat transport.

Economic Geology↗