Search USGS⌕ Search

Geology topics

Donald C. Signor

Publications and source records attributed to Donald C. Signor.

7 recordsLinked to original sources
USGS2010

Accounting for intracell flow in models with emphasis on water table recharge and stream-aquifer interaction: 1. Problems and concepts

Intracell flow is important in modeling cells that contain both sources and sinks. Special attention is needed if recharge through the water table is a source. One method of modeling multiple sources and sinks is to determine the net recharge per cell. For example, for a model cell containing both a sink and recharge through the water table, the amount of recharge should be reduced by the ratio of the area of influence of the sink within the cell to the area of the cell. The reduction is the intercepted portion of the recharge. In a multilayer model this amount is further reduced by a proportion factor, which is a function of the depth of the flow lines from the water table boundary to the internal sink. A gaining section of a stream is a typical sink. The aquifer contribution to a gaining stream can be conceptualized as having two parts; the first part is the intercepted lateral flow from the water table and the second is the flow across the streambed due to differences in head between the water level in the stream and the aquifer below. The amount intercepted is a function of the geometry of the cell, but the amount due to difference in head across the stream bed is largely independent of cell geometry. A discharging well can intercept recharge through the water table within a model cell. The net recharge to the cell would be reduced in proportion to the area of influence of the well within the cell. The area of influence generally changes with time. Thus the amount of intercepted recharge and net recharge may not be constant with time. During periods when the well is not discharging there will be no intercepted recharge even though the area of influence from previous pumping may still exist. The reduction of net recharge per cell due to internal interception of flow will result in a model-calculated mass balance less than the prototype. Additionally the “effective transmissivity” along the intercell flow paths may be altered when flow paths are occupied by intercepted recharge.

Water Resources Research↗
USGS2010

Accounting for intracell flow in models with emphasis on water table recharge and stream-aquifer interaction: 2. A procedure

Intercepted intracell flow, especially if cell includes water table recharge and a stream ((sink), can result in significant model error if not accounted for. A procedure utilizing net flow per cell ( F n ) that accounts for intercepted intracell flow can be used for both steady state and transient simulations. Germane to the procedure is the determination of the ratio of area of influence of the interior sink to the area of the cell ( A i / A c ). A i is the area in which water table recharge has the potential to be intercepted by the sink. Determining A i / A c requires either a detailed water table map or observation of stream conditions within the cell. A proportioning parameter M , which is equal to 1 or slightly less and is a function of cell geometry, is used to determine how much of the water that has potential for interception is intercepted by the sink within the cell. Also germane to the procedure is the determination of the flow across the streambed ( F s ), which is not directly a function of cell size, due to difference in head between the water level in the stream and the potentiometric surface of the aquifer underlying the streambed. The use of F n for steady state simulations allows simulation of water levels without utilizing head-dependent or constant head boundary conditions which tend to constrain the model-calculated water levels, an undesirable result if a comparison of measured and calculated water levels is being made. Transient simulations of streams usually utilize a head-dependent boundary condition and a leakance value to model a stream. Leakance values for each model cell can be determined from a steady state simulation, which used the net flow per cell procedure. For transient simulation, F n would not include F s . Also, for transient simulation it is necessary to check F n at different time intervals because M and A i / A c are not constant and change with time. The procedure was used successfully in two different models of the aquifer system in the Ozarks. The use of F n was essential to the two model studies because most model cells in both models contained water table recharge and multiple sinks.

Water Resources Research↗
USGS1978

Gas-driven pump for ground-water samples

Observation wells installed for artificial-recharge research and other wells used in different ground-water programs are frequently cased with small-diameter steel pipe. To obtain samples from these small-diameter wells in order to monitor water quality, and to calibrate solute-transport models, a small-diameter pump with unique operating characteristics is required that causes a minimum alternation of samples during field sampling. A small-diameter gas-driven pump was designed and built to obtain water samples from wells of two-inch diameter or larger. The pump is a double-piston type with the following characteristics: (1) The water sample is isolated from the operating gas, (2) no source of electricity is ncessary, (3) operation is continuous, (4) use of compressed gas is efficient, and (5) operation is reliable over extended periods of time. Principles of operation, actual operation techniques, gas-use analyses and operating experience are described. Complete working drawings and a component list are included. Recent modifications and pump construction for high-pressure applications also are described. (Woodard-USGS)

Water-Resources Investigations Report↗
USGS1973

Artificial-recharge experiments and operations on the Southern High Plains of Texas and New Mexico

Experiments using highly turbid water from playa lakes for injection into the Ogallala Formation have resulted in greatly decreased yield of the recharge wells, Recharge of ground or surface water of good quality has indicated, however, that injection through wells is an effective method of recharging the aquifer. Water that is slightly turbid can be successfully injected for a period of time, but generally results in constantly declining yields and capacity for recharge. Redevelopment through pumping and surging significantly prolongs the life of recharge wells under some conditions. Surface spreading is little practiced on the High Plains, but locally may be a feasible means of artificial recharge.

Water-Resources Investigations Report↗
USGS1970

Annotated bibliography on artificial recharge of ground water, 1955-67

Artificial ground-water recharge has become more important as water use by agriculture, industry, and municipalities increases. Water management agencies are increasingly interested in potential use of recharge for pollution abatement, waste-water disposal, and re-use and reclamation of locally available supplies. Research projects and theoretical analyses of operational recharge systems show increased scientific emphasis on the practice. Overall ground-water basin management systems generally now contain considerations of artificial recharge, whether by direct or indirect methods. Artificial ground-water recharge is a means of conserving surface runoff for future use in places where it would otherwise be lost, of protecting ground-water basins from salt-water encroachment along coastal areas, and of storing and distributing imported water. The biblio-graphy emphasizes technology; however, annotations of articles on waste-water reclamation, ground-water management and ground-water basin management are included. Subjects closely related to artificial recharge, including colloidal flow through porous media, field or laboratory instrumentation, and waste disposal by deep well injection are included where they specifically relate to potential recharge problems. Where almost the same material has been published in several journals, all references are included on the assumption that some publications may be more readily available to interested persons than others. Other publications, especially those of foreign literature, provided abstracts that were used freely as time limitations precluded obtaining and annotating all materials. Abstracts taken from published sources are noted. These are: "Abstracts of North American Geology," U.S. Department of the Interior, Geological Survey; "Abstracts of Recent Published Material on Foil and Water Conservation," ARS-41 series, Agricultural F.esearch Service, U.S. Department of Agriculture; "Water and1 Water Engineering," published by Fuel and Metallurgical Journals, Ltd., London, England; "Journal of Geophysical Research," American Geophysical Union, Washington, D.C.; "American Society of Civil Engineers Transactions," New York; "Selected Bibliography of Hydrology, United Kingdom, for the Years 1955-59," International Association of Scientific Hydrology; "Water Wells, an Annotated Bibliography," California University Water Resources Center Archives Report 13; "Re-use of Effluent in the Future With an Annotated Bibliography," by G. A. Whetstone, Texas Water Development Board Report 8, Austin, Tex.; "Journal of Water Pollution Control Federation," Washington, D.C.; and "A List of Selected Technical References on Artificial Recharge of Ground-Water Reservoirs," compiled by Roy W. Graves, Tulsa University, Information Services Department, Tulsa, Okla. Other notations are self-explanatory, and initials are those of the authors (DCS, DJG, WK). An unpublished compilation of recharge references by Arnon Arad sponsored by the United Nations Educational, Scientific, and Cultural Organization during a training period with the U.S. Geological Survey was also used. The bibliography is arranged alphabetically by author. Where an author has more than one publication, the arrangement is chronological; where an author has more than one publication in a given year, a, b, c, . . . are added. The indexing is by subject and geographic location. Each article was assigned the key words or phrases to best characterize its contents. Units of measure are as they were in the original article; abbreviations retained are generally those in common use such as mg/1 (milligrams per liter), ppm (parts per million), gpm (gallons per minute), km (kilometers), m (meters), cu m per hr (cubic meters p^r hour), cfs (cubic feet per second), me/1 (milliequivalents per liter), psi (pounds per square inch), BOD (biochemical oxygen demand), sq m (square meters), gpd (gallons per day), and mgd (million gallons per day). The bibliography was prepared because of the worldwide interest in the field of artificial recharge and the need for a single source of references to the literature published since 1954. The work is a sequel to the "Annotated Bibliography on Artificial Recharge of Ground Water Through 1954," by D. K. Todd, U.S. Geological Survey Water-Supply Paper 1477, published in 1959.

Water Supply Paper↗