Geology topics

Dominick J. Antolino

Publications and source records attributed to Dominick J. Antolino.

8 recordsLinked to original sources

USGS2025

Simulation of groundwater flow in Wake County, North Carolina, 2000 through 2070

In 2019, the U.S. Geological Survey and Wake County Environmental Services began a collaborative study to evaluate groundwater resources and long-term groundwater availability in the county’s fractured-rock groundwater system. Wake County, in central North Carolina, is experiencing rapid population growth, associated land development, and changing water use. Hydrogeologic data including groundwater levels, aquifer testing, borehole fracture flow measurements, water-quality samples, and groundwater age-dating tracers were collected, along with findings from previous investigations, to help inform a conceptual model of the flow system used to develop a modular three-dimensional finite-difference groundwater-flow model (MODFLOW) for simulating historical and future groundwater conditions from 2000 to 2070. Hydraulic conductivity and transmissivity ranges were estimated from 17 slug tests and 21 borehole-flow measurements. Groundwater-quality analytical results from 19 sampling sites indicate that oxidation-reduction (redox) conditions varied within the regolith and bedrock and that minimal evaporation occurred before recharge entered the groundwater system. Age dating revealed mixtures of older and younger water, ranging from the 1940s to the 1990s—indicating variable flow pathways of recharge within permeable bedrock fracture zones. To simplify the complex fractured-rock groundwater system, two layers representing the regolith and the fractured bedrock were used in the MODFLOW model. Model calibration included parameter estimation and provided a reasonable fit to observed groundwater levels and estimated stream base flows. The model forecast scenarios incorporated future climate-model data for two emissions scenarios with land cover change projections to simulate potential impacts to future groundwater levels, recharge, and base flows. Recharge and base flow projections were largely within historical ranges, with no apparent long-term trends, but did indicate a slight downward shift in median values—likely, in part, because of differences in spatial resolution of input climate datasets. Seasonal patterns were consistent with historical data, with projections of possible increases in future winter recharge. Model limitations are discussed, and additional monitoring and model refinement needs are highlighted to support decision making for local groundwater management.

North Carolina↗

USGS2022

Assessment of well yield, dominant fractures, and groundwater recharge in Wake County, North Carolina

A cooperative study led by the U.S. Geological Survey and Wake County Environmental Services was initiated to characterize the fractured-rock aquifer system and assess the sustainability of groundwater resources in and around Wake County. This report contributes to the development of a comprehensive groundwater budget for the study area, thereby helping to enable resource managers to make sound and sustainable water-supply and water-use decisions. Construction information was used to analyze the well depth, casing depth, and reported well yield of more than 7,500 inventoried wells. The median well depth and casing depth were 265 feet (ft) below land surface (bls) and 68 ft bls, respectively, and the median well yield was 10 gallons per minute. Generally, well yield increased with depth to around 200 ft bls and then began to decrease with depth within the fractured-rock aquifer. Borehole geophysical logging methods were used to characterize the fractured-rock aquifer by mapping the orientation of geologic structures within the subsurface. Structure measurements were made on resulting log data and mapped to observed general spatial trends within the regional groundwater system and more distinct hydrogeologic units. Many of the fractures observed within the borehole logs are steeply dipping across Wake County, although open fractures with shallow dip angles were also observed in most rock classes. Regional geologic structural trends were observed in proximity to the Jonesboro Fault. Potential groundwater recharge in the study area was estimated using a Soil-Water-Balance (SWB) model, as well as using base flow hydrograph separation. The SWB model calculated net infiltration below the root zone for 1981 through 2019 for a 5,402-square-mile area that extends to the counties surrounding Wake County. The mean annual net infiltration rate for the 39-year period was about 8.6 inches per year for the study area. The mean annual net infiltration results from the SWB model were comparable to annual base flow estimates using the PART hydrograph-separation method at six U.S. Geological Survey streamgages within the study area. Mean annual base flow for all six drainage basins was near 7.5 inches per year and estimates ranged from 2.9 to 8.9 inches. Comparisons of mean annual potential recharge from the SWB model and base flow estimates were generally within 2 inches, except during high flows for most of the drainage basins in the study area.

North Carolina↗

USGS2019

Groundwater/surface-water interactions along Ellerbe Creek in Durham, North Carolina, 2016–18

An assessment of groundwater/surface-water interactions along Ellerbe Creek, a major tributary to upper Falls Lake in Durham County, North Carolina, was conducted from July 2016 to March 2018 to determine if groundwater is a likely source of elevated nitrate input to the stream. Groundwater/surface-water interactions were characterized by synoptic streamflow measurements, groundwater-level monitoring, hydrograph-separation methods, and a continuous streambed temperature survey to aid in the collection and interpretation of water-quality data. A streamflow gain-loss survey identified gaining and losing reaches within the stream and found that surface-water inflow, including that from a treated wastewater outfall, provided much of the streamflow gain within the study reach. Through the use of two hydrograph-separation methods, base flow for the Ellerbe Creek study reach was estimated to be between 14.0 and 17.7 cubic feet per second during the study period, contributing up to 57 percent of mean streamflow, with the remaining contributions coming from surface runoff to the stream. The effluent discharge accounted for most of the estimated base-flow contribution to the stream below the North Durham Water Reclamation Facility outfall. Hydraulic gradients within the groundwater were determined to flow upward and toward the stream during base-flow conditions and reverse during storm events. Nitrate concentrations ranged from below the method detection level to 2.69 milligrams per liter, with the highest concentrations just downstream from the wastewater outfall. Bank seeps and groundwater samples had lower nitrate concentrations than surface-water samples, ranging from below the method detection level to 1.04 milligrams per liter, with the highest concentration at the piezometer within the stream. Results indicate that groundwater is not a large component of streamflow within Ellerbe Creek nor a major source of nitrate within the study reach.

North Carolina↗

USGS2017

Geophysical logging and thermal imaging near the Hemphill Road TCE National Priorities List Superfund site near Gastonia, North Carolina

Borehole geophysical logs and thermal imaging data were collected by the U.S. Geological Survey near the Hemphill Road TCE (trichloroethylene) National Priorities List Superfund site near Gastonia, North Carolina, during August 2014 through February 2015. In an effort to assist the U.S. Environmental Protection Agency in the development of a conceptual groundwater model for the assessment of current contaminant distribution and future migration of contaminants, surface geological mapping and borehole geophysical log and thermal imaging data collection, which included the delineation of more than 600 subsurface features (primarily fracture orientations), was completed in five open borehole wells and two private supply bedrock wells. In addition, areas of possible groundwater discharge within a nearby creek downgradient of the study site were determined based on temperature differences between the stream and bank seepage using thermal imagery.

North Carolina↗

USGS2017

Continued geophysical logging near the GMH Electronics National Priorities List Superfund site near Roxboro, North Carolina

The U.S. Geological Survey South Atlantic Water Science Center collected borehole geophysical logs and images and continuous water-level data near the GMH Electronics National Priorities List Superfund site near Roxboro, North Carolina, during December 2012 through July 2015. Previous work by the U.S. Geological Survey South Atlantic Water Science Center at the site involved the collection of borehole geophysical log data in 15 wells, in addition to surface geologic mapping and passive diffusion bag sampling. In a continued effort to assist the U.S. Environmental Protection Agency in developing a conceptual groundwater model to assess current contaminant distribution and future migration of contaminants, more than 900 subsurface features (primarily fracture orientations) in 10 open borehole wells were delineated and continuous water-level data information from 14 monitoring wells within close proximity of the initially drilled boreholes was collected to observe any induced water-level fluctuations during drilling operations

North Carolina↗

USGS2015

Characterization of water-quality and bed-sediment conditions in Currituck Sound, North Carolina, prior to the Mid-Currituck Bridge construction, 2011–15

The North Carolina Turnpike Authority, a division of the North Carolina Department of Transportation, is planning to make transportation improvements in the Currituck Sound area by constructing a two-lane bridge from U.S. Highway 158 just south of Coinjock, North Carolina, to State Highway 12 on the Outer Banks just south of Corolla, North Carolina. The results of the Final Environmental Impact Study associated with the bridge and existing roadway improvements indicated potential water-quality and habitat impacts to Currituck Sound related to stormwater runoff, altered light levels, introduction of piles as hard substrate, and localized turbidity and siltation during construction. The primary objective of this initial study phase was to establish baseline water-quality conditions and bed-sediment chemistry of Currituck Sound in the vicinity of the planned alignment of the Mid-Currituck Bridge. These data will be used to evaluate the impacts associated with the bridge construction and bridge deck stormwater runoff. Between 2011 and 2015, discrete water-quality samples were collected monthly and after selected storm events from five locations in Currituck Sound. The sampling locations were distributed along the proposed alignment of the Mid-Currituck Bridge. Water samples were analyzed for physical parameters and water-quality constituents associated with bridge deck stormwater runoff and important in identifying impaired waters designated as “SC” (saltwater-aquatic life propagation/ protection and secondary recreation) under North Carolina’s water-quality classifications. Bed-sediment chemistry was also measured three times during the study at the five sampling locations. Continuous water-level and wind speed and direction data in Currituck Sound were also collected by the U.S. Geological Survey during the study period. For the water samples, measured concentrations were greater than water-quality thresholds on 52 occasions. In addition, there were 190 occurrences of censored results having a reporting level higher than specific thresholds. All 52 occurrences of concentrations greater than water-quality thresholds were confined to seven different physical properties or constituents, namely pH (25), turbidity (8), total recoverable chromium (6), total recoverable copper (6), dissolved copper (3), total recoverable mercury (2), and total recoverable nickel (2). Concentrations of 17 other constituents were never measured to be greater than their established water-quality thresholds during the study. The focus of the water-quality characterization was on concentrations of constituents identified as parameters of concern in a 2011 collaborative U.S. Geological Survey/North Carolina Department of Transportation study that characterized bridge deck stormwater runoff across North Carolina. The occurrence and distribution of parameters of concern identified in the 2011 study, including pH, nutrients, total recoverable and dissolved metals, and polycyclic aromatic hydrocarbons, and some additional pertinent physical properties (dissolved oxygen, specific conductance, and turbidity), were analyzed in water and bed-sediment samples. Statistical differences were identified between monthly and storm samples for the following physical properties and constituents: pH, dissolved oxygen, specific conductance, turbidity, Escherichia coli bacteria, total recoverable aluminum, and total recoverable iron. Seasonality was observed in pH, specific conductance, dissolved oxygen, turbidity, total phosphorus, and total nitrogen, and total recoverable aluminum, arsenic, iron, lead, and manganese during the study period. The volume and residence time of the water in Currituck Sound are such that the water chemistry is relatively uniform spatially, but variable temporally. One of the most variable constituents in bed sediments was the fraction of fines, those sediments less than 63 micrometers in diameter. Because most, if not all, of the measured constituents were presumably associated with this fraction, bulk-sediment concentrations are determined largely by the amount of fines present. Only four constituents were greater than bed-sediment thresholds: tin (5 samples), barium (4 samples), aluminum (2 samples), and diethyl phthalate (1 sample). The occurrences of concentrations being greater than referenced thresholds could be underestimated for diethyl phthalate, because the reporting level exceeded the threshold in nine samples. Thirty-five constituents had sampled concentrations that were never greater than quality thresholds, although 21 of these constituents (154 instances) had at least one sample with a reporting level that was greater than the corresponding threshold. Finally, 33 constituents had no quality thresholds. This study and previous studies of bed-sediment quality in Currituck Sound, although few, indicate that sedimentation in Currituck Sound near the proposed alignment of the MidCurrituck Bridge is characterized overall by low and transient input, frequent wind-driven resuspension, and little long-term deposition of fines. To the extent that it might alter water depths along the alignment, bridge construction might also alter the deposition and resuspension rates of fine sediments in Currituck Sound in the vicinity of the bridge. The characterization of water-quality and bed-sediment chemistry in Currituck Sound along the proposed alignment of the Mid-Currituck Bridge summarized herein provides a baseline for determining the effect of bridge construction and bridge deck runoff on environmental conditions in Currituck Sound.

North Carolina↗

USGS2015

Relations between well-field pumping and induced canal leakage in east-central Miami-Dade County, Florida, 2010-2011

An extensive canal and water management system exists in south Florida to prevent flooding, replenish groundwater, and impede saltwater intrusion. The unconfined Biscayne aquifer, which underlies southeast Florida and provides water for millions of residents, interacts with the canal system. The Biscayne aquifer is composed of a highly transmissive karst limestone; therefore, canal stage and flow may be affected by production well pumping, especially in locations where production wells and canals are in proximity. The U.S. Geological Survey developed a local-scale, transient, numerical groundwater flow model of a well field in Miami-Dade County to (1) quantify relations between well-field pumping and C-2 Canal (herein referred to as the Snapper Creek Canal) leakage, (2) determine primary controls on canal leakage variability, and (3) summarize results that could simplify characterization of canal/well-field interactions in other locations. In addition to the groundwater model development, stable isotope data from water-quality samples were used to characterize the relations between production well pumping and canal leakage. The results from the groundwater model and the isotope data were used to refine the conceptual flow model of the study area. The groundwater flow model MODFLOW-NWT was used for simulating groundwater flow and quantifying interactions between pumping from the well field and Snapper Creek Canal leakage. Input data for the groundwater model included precipitation, evapotranspiration, pumping, canal stage, and regional groundwater elevation. The inverse modeling tool UCODE and groundwater data from June 2010 to July 2011 were used to calibrate the model. Parameter sensitivity analyses were performed with UCODE. Model sensitivities to geologic heterogeneity, non-laminar flow, and changes in the regional flow boundary were evaluated. The groundwater model generally fits the calibration criteria well within estimated error ranges for groundwater elevations and canal leakage values. The mean average error for heads simulated with the model was 0.19 meter, and head residuals were generally randomly distributed. The model simulated groundwater flow under ambient conditions without production well pumping to establish background leakage. Groundwater flow also was simulated with production well pumping to estimate induced leakage from the Snapper Creek Canal that occurs in response to pumping. Canal leakage was quantified as a percentage of total canal leakage. The percentage of leakage during pumping increased non-linearly with pumping rate, indicating a decreasing sensitivity of canal leakage to pumping at relatively large pumping magnitudes. The results for Snapper Creek Canal may serve as an upper limit for well-field interaction with surface-water features in Miami-Dade County, given the proximity (about 50 meters) of the pumping wells in this study to the Snapper Creek Canal. The isotopic compositions of hydrogen (H) and oxygen (O) in groundwater samples were used to distinguish sources for groundwater within the study area and to assess the extent of natural mixing and pumping-induced mixing with water in the Snapper Creek Canal. Water-level data and water-quality samples were collected from monitoring well clusters, production wells, and the Snapper Creek Canal during discrete sampling events under ambient and pumping conditions. Trends in the isotope data generally follow the regional west-to-east hydraulic gradient across the study area. Data collected within the monitoring-well clusters in closest proximity to the canal indicate that groundwater/surface-water interactions are greatest within the shallow flow zone of the aquifer, especially during pumping conditions. The isotopic composition of samples collected within the study area indicates that the shallow, highly transmissive preferential flow zone receives substantial recharge from the canal. The isotope data from the production wells which are open to the deeper flow zone within the aquifer, indicate only traces of mixing with a 2 H- and 18 O-enriched source, suggesting little canal admixture with waters of the deeper flow zone. Results from the groundwater model and the stable isotope data analysis indicate the importance of considering geologic heterogeneity when investigating the relations between pumping and canal leakage, not only at this site, but also at other sites with similar heterogeneous geology. The model results were consistently sensitive to the hydrogeologic framework and changes in hydraulic conductivities. The model and the isotope data indicate that the majority of the groundwater/surface-water interactions occurred within the shallow flow zone. A relatively lower-permeability geologic layer occurring between the shallowest and deep preferential flow zones lessens the interactions between the production wells and the canal.

Florida↗

USGS2014

Hydrogeology, hydraulic characteristics, and water-quality conditions in the surficial, Castle Hayne and Peedee aquifers of the greater New Hanover County area, North Carolina, 2012-13

A major issue facing the greater New Hanover County, North Carolina, area is the increased demand for drinking water resources as a result of rapid growth. The principal sources of freshwater supply in the greater New Hanover County area are withdrawals of surface water from the Cape Fear River and groundwater from the underlying Castle Hayne and Peedee aquifers. Industrial, mining, irrigation, and aquaculture groundwater withdrawals increasingly compete with public-supply utilities for freshwater resources. Future population growth and economic expansion will require increased dependence on high-quality sources of fresh groundwater. An evaluation of the hydrogeology and water-quality conditions in the surficial, Castle Hayne, and Peedee aquifers was conducted in New Hanover, eastern Brunswick, and southern Pender Counties, North Carolina. A hydrogeologic framework was delineated by using a description of the geologic and hydrogeologic units that compose aquifers and their confining units. Current and historic water-level, water-quality, and water-isotope data were used to approximate the present boundary between freshwater and brackish water in the study area. Water-level data collected during August–September 2012 and March 2013 in the Castle Hayne aquifer show that recharge areas with the highest groundwater altitudes are located in central New Hanover County, and the lowest are located in a discharge area along the Atlantic Ocean. Between 1964 and 2012, groundwater levels in the Castle Hayne aquifer in central New Hanover County have rebounded by about 10 feet, but in the Pages Creek area groundwater levels declined in excess of 20 feet. In the Peedee aquifer, the August–September 2012 groundwater levels were affected by industrial withdrawals in north-central New Hanover County. Groundwater levels in the Peedee aquifer declined more than 20 feet between 1964 and 2012 in northeastern New Hanover County because of increased withdrawals. Vertical gradients calculated between the Castle Hayne and Peedee aquifers at six well cluster sites were downward in August–September 2012 and March 2013 with the exception of one well pair that had a slight upward gradient in March 2013. Major ion chemistry results from samples collected in August–September 2012 from 97 well sites suggest that seawater is mixing with groundwater in both the Castle Hayne and Peedee aquifers in several locations in Brunswick, New Hanover, and Pender Counties. The 250 milligram per liter line of equal chloride concentration has moved inland in both aquifers since 1965, with the area between Futch and Pages Creeks in northeastern New Hanover County experiencing the greatest increase. Groundwater from the surficial, Castle Hayne, and Peedee aquifers had a stable isotope of water composition similar to that of modern precipitation. A comparison of chloride concentration data collected from public-supply wells in the 1960s with that collected in 2012 shows marked increases in chloride concentrations in the Peedee aquifer near the town of Carolina Beach at the southern end of New Hanover County.

North Carolina↗