Geology topics

David R. Shelly

Publications and source records attributed to David R. Shelly.

15 recordsLinked to original sources

USGS2026

Moment magnitude for small earthquakes in the Delaware basin of west Texas and southeast New Mexico, USA

The Delaware Basin region of west Texas and southeast New Mexico has become one of the most prolific regions of seismic activity in the continental United States due to widespread hydraulic fracturing and wastewater disposal injection. In response to the increased number of earthquakes in this region, rapid and accurate characterization of earthquake sources is necessary to understand the evolution of seismic activity and level of seismic hazard associated with these earthquakes. This study re-evaluates earthquake magnitudes, estimating moment magnitude (MW) for small earthquakes in the Delaware Basin using 1) moment-rate spectra derived from S-wave coda envelopes, and 2) a relative magnitude method that relies exclusively on the ratio of waveform amplitudes between highly correlated waveform pairs. The coda-envelope method produces accurate M W estimates for small earthquakes ( M 1.5 – 3) that are consistent with independent, waveform modeled moment magnitudes for events with M W > 3 . Using the relative amplitudes method to extend these M W magnitudes to many other events, we successfully provide relative moment magnitude ( M W,rel ) values for 81% of the Texas Seismological Network catalog in the Delaware Basin region, and 45% of the USGS Induced Seismicity Project’s catalog of events in southeast New Mexico. The adoption and integration of the calibrated M W,rel method with current magnitude estimation methods offers valuable insights into the relationships between local and moment magnitude and will contribute to improved characterization of widespread induced seismicity.

New Mexico, Texas↗

USGS2026

Surface-wave relocation and characterization of the 2024–2025 dyking episode along the Fentale–Dofen segment of the Ethiopian rift

From late-December 2024 to mid-March 2025, a 50-km-long dyke intrusion triggered over 300 earthquakes (magnitude 4 to 5.9) between Fentale and Dofen volcanoes along the Northern Main Ethiopian Rift. Dyke intrusions periodically occur along the Fentale–Dofen magmatic segment and are an expression of ongoing rift extension. Preliminary analyses using interferometric synthetic aperture radar revealed extensive ground deformation (up to 60 cm), which closely matched the temporal and spatial evolution of surface manifestations and earthquake locations from global catalogues. While global catalogues are critical for real-time monitoring, the precision of locations in remote and or sparsely instrumented regions can be low. In this investigation, we present surface-wave relocation results of the dyking episode that began near Fentale volcano in December 2024. We estimate relative locations using differential traveltimes measured from regional-to-teleseismic distance surface-wave observations of earthquakes reported by the U.S. Geological Survey. Relative relocations reduce the initial region of diffuse seismicity to a 50-km-long narrow band bounding the strike of surface manifestations and the zone of maximum surface deformation. We demonstrate the precision of surface-wave relocations over incremental time periods, capturing the progression of dyking from seismic onset through seismic migration and caldera subsidence. Results showcase the utility of surface-wave relocations in the characterization of dyking episodes and provide complementary insights into the current understanding of the Fentale–Dofen volcanic plumbing system.

Geophysical Journal International↗

USGS2026

Special issue “The 2024 M7.6 Noto Peninsula earthquake and seismic swarm”

The 2024 Mw7.5 (M JMA 7.6) Noto Peninsula earthquake struck the Noto Peninsula, central Japan on January 1, 2024, causing widespread damage. This Mw7.5 mainshock, together with the prolonged seismic swarm that persisted in the northeastern Noto Peninsula since the end of 2020, of which the largest event was the 2023 M JMA 6.5 earthquake, constitutes one of the most significant seismic sequences in Japan in recent decades. The sequence provides a rare opportunity to investigate the complex interplay among swarm activity, fluid migration, fault geometry and distribution, and the preparatory conditions required for a large inland crustal earthquake. Motivated by this scientific context, this special issue brings together studies examining the sequence from diverse disciplinary perspectives, incorporating seismic, geodetic, and tsunami-related observations and modelling.

Noto Peninsula↗

USGS2026

Low-frequency earthquakes track the motion of a captured slab fragment

Accurate tectonic models are essential for assessing seismic hazard and fault interactions. However, the plate configuration at the complex Mendocino triple junction, where the San Andreas Fault and the Cascadia subduction zone meet, remains uncertain. We analyzed fault slip associated with a recently identified zone of tectonic tremor and low-frequency earthquakes (LFEs) near the southern edge of the subducting Gorda slab. Based on tidal sensitivity and P-wave first motions, we show that the LFEs are generated by dipping, strike-slip motion. This suggests that a former Farallon slab fragment, now captured by the Pacific plate, is translating northward beneath westernmost North America. This geometry effectively extends the slab interface fault, challenging prevailing interpretations of slab window formation and creating a potential unaccounted earthquake hazard in this region.

Science↗

USGS2026

Magnitude conversion relations create substantial differences in seismic hazard models

Earthquake catalogs are essential data inputs for seismic hazard modeling. Because earthquake magnitudes are reported in a variety of types (e.g., local magnitudes and moment magnitudes), magnitude conversion relationships must be used to convert the different magnitude types present in a catalog to a uniform magnitude type to avoid biases in the hazard computation. However, these conversion relationships are often uncertain and have been shown to sometimes perform poorly. Here, we investigate the sensitivity of the gridded seismicity component of the National Seismic Hazard Model (NSHM) to the catalog conversion equations in the Eastern United States. In the 2023 NSHM, magnitudes of various types were converted to moment magnitudes using equations developed by the Central and Eastern United States Seismic Source Characterization for Nuclear Facilities (CEUS‐SSCn), based on least‐squares (LS) regressions made using data from a catalog containing events up through 2008. We recompute these equations using events in the Advanced National Seismic System Comprehensive Earthquake Catalog with multiple magnitudes from 2000 to 2023. Although we prefer the use of orthogonal regressions for our datasets, LS regressions produce broadly similar results, with both approaches exhibiting large deviations from the CEUS‐SSCn conversions, especially at smaller magnitudes. We compare the spatial distribution of annual rates using three different models: (1) the 2023 NSHM conversions, (2) our updated conversions, and (3) no conversions. We find that the choice of conversions leads to substantial differences in the rate forecasts, which can greatly impact the seismic hazard model, particularly in regions with low‐seismicity rates such as the Eastern United States, where the hazard is dominated by gridded seismicity rather than a fault model.

Seismological Research Letters↗

USGS2025

Subduction zone earthquake catalog separation tool: Implementation in the USGS 2025 Puerto Rico and U.S. Virgin Islands National Seismic Hazard Model

The U.S. Geological Survey (USGS) periodically releases updates to National Seismic Hazard Model (NSHM) for the United States and its territories leveraging current scientific knowledge and methodologies to guide public policy, building codes, and risk assessments regarding potential ground shaking due to earthquakes that may result in infrastructure damage. In subduction zones, there is a need to separate the earthquake catalog into tectonic regimes to create specific seismicity models for which the most appropriate ground‐motion models are then applied. Here, we describe newly developed methods and software, called CatSep, that classifies subduction zone events into three primary tectonic regimes: crustal, interface, and intraslab. This method incorporates information about the location of the earthquake relative to the subducting slab, the depth of the Mohorovičić discontinuity, and the earthquake’s moment tensor. Applying this method is a first step in the NSHM workflow for regions covering U.S. subduction zones. Results using this subduction zone earthquake catalog separation tool for the 2025 Puerto Rico and U.S. Virgin Islands NSHM earthquake catalog are presented and analyzed.

Puerto Rico, U.S. Virgin Islands↗

USGS2025

SURF: An automated method for building nonplanar 3D fault models from earthquake hypocenters

Accurately characterizing 3D fault geometry is vital for improving our understanding of earthquake behavior and informing the development of seismic hazard models. Despite their importance, subsurface fault structures tend to be poorly constrained because of limitations in observational data. Improvements to the seismic networks and earthquake detection algorithms have increased the precision and volume of earthquake catalogs, which help illuminate detailed subsurface fault structure and provide the most direct information available about fault geometries at depth. We present a Python package to automate generating 3D fault geometries directly from hypocentral seismicity patterns. This method begins with clustering events based on their spatial density, identifying coherent patterns. Nearby clusters are then merged based on the similarity of their orientations. We fit nonplanar surfaces using support vector regression to balance surface accuracy with minimal deviations from planarity. The fault models are output as quadrilateral meshes at user‐defined resolution. In the process of generating the 3D fault surfaces, we compute the spatial density of seismicity around the surface and the planarity as quantitative metrics of the model outputs. As a proof of concept, we apply this approach to the San Andreas–Calaveras fault junction region and the 2019 Ridgecrest earthquake sequence, both in California, which contain complex subparallel faults well defined at the Earth’s surface and abundant microseismicity. These case studies demonstrate the method’s ability to model complex fault structures, including long continuous fault surfaces, crossing faults, variably dipping segments, and subparallel faults. We test the method on both standard network catalogs and double‐difference relocated catalogs. We find that our seismicity‐based fault model results align with published 3D models that incorporate additional constraints and interpretations ( Plesch et al. , 2020 ; Aagaard and Hirakawa, 2021 ). This workflow provides a low‐user‐input solution for estimating fault geometries at depth from earthquake catalogs.

California↗

USGS2025

A glimpse into the future of tectonic tremor monitoring

Tectonic tremor is a weak, long-duration seismic signal often observed in subduction zones and on some other plate-bounding faults. Because of tremor's characteristically low amplitude (and low signal-to-noise) and lack of clear phase arrivals, detecting and locating tremor usually requires techniques distinct from those applied to typical earthquakes. Major advances in detection and understanding of tremor have derived in the past from a powerful combination of new data and new analysis techniques. In a recent study, Sagae et al. (2025, https://doi.org/10.1029/2025jb031348 ) exploit that combination again, developing a new machine-learning based workflow and applying it to the S-net cabled seismic network in the Japan trench offshore northern Honshu. Their approach, although complex, succeeds in detecting several times more tremor activity than earlier studies, resulting in new insights and providing a blueprint for similar approaches that could be applied elsewhere. As real-time earthquake monitoring adopts similar tools, it may present an opportunity to bring tremor monitoring into operational workflows. In turn, this could solidify tremor monitoring as a component of future operational earthquake forecasting.

JGR Solid Earth↗

USGS2025

A scientific vision and roadmap for earthquake rupture forecast developments, a USGS perspective

We articulate a scientific vision and roadmap for the development of improved Earthquake Rupture Forecast models, which are one of the two main modeling components used in modern seismic hazard and risk analysis. One primary future objective is to provide fully time-dependent models that include both elastic rebound and spatiotemporal clustering nationwide, which is particularly important for shorter-term hazard and risk considerations (e.g., earthquake insurance products). We also discuss the importance and perennial challenges associated with quantifying epistemic uncertainties, including those associated with deformation-model slip rates, un-quantified sampling errors with respect to off-fault seismicity, and any spatial covariances. The need for more physics-based approaches is also emphasized, as is the benefit of adding model valuation (quantifying usefulness) to our verification and validation protocols. Given the multidisciplinary and system-level nature of this activity, modular design is critical. Future updates will also draw from best-available science by both the United States Geological Survey and the external community. The primary goal of this paper is to highlight plans that guide research and facilitate community engagement with model development, especially with respect to lowering the entry barrier for early career scientists and engineers. The paper is written so readers can focus on the sections that interest them most (see table of contents), with the Introduction and Discussion providing a stand-alone overview and summary.

Bulletin of the Seismological Society of America↗

USGS2025

Divide and conquer: Separating the two probabilities in seismic phase picking

There are two fundamental probabilities in the seismic phase picking process – the probability of the existence of a seismic phase (detection probability) and the probability of correctly identifying the phase arrival time (timing probability). The nearly ubiquitous approach in developing deep learning phase picking models is to use a kernel, such as a truncated Gaussian, to mask the labeled phase arrival time, and train a segmentation model. Once a model is trained, the times of the peaks in the output are taken as phase arrival times (picks) and the height of the peaks are taken as “probability” of the picks. Here, we show that this “probability” represents neither the detection nor the timing probabilty because this approach forces the output to follow the shape of the kernel. We introduce an approach using two models to estimate these two distinct probabilities. We use a binary classifier with a calibrated confidence to address the detection probability and a multi-class classifier to obtain a probability mass function to address the timing probability. This new approach makes the deep learning-based phase picking process more interpretable and gives us options to logically control seismic monitoring workflows.

Geophysical Journal International↗

USGS2025

Long-term dynamics of earthquake swarms in the Yellowstone caldera

The factors controlling the spatial distribution and temporal evolution of earthquake swarms in volcanic systems remain unclear. We leverage leading-edge deep learning algorithms and a detailed three-dimensional velocity model to construct a 15-year high-resolution earthquake catalog of the Yellowstone caldera region. More than half of the region’s earthquakes are clustered into swarm-like families characterized by episodes of hypocenter expansion and migration. Adjacent earthquake swarms, separated by long quiescent periods, are found to be a dominant feature. We suggest that these swarms are controlled by the interplay between slowly diffusing aqueous fluids and rapid episodic fluid injections, which may result from the breaking of permeability seals. Our analyses also indicate that clustered seismicity beneath the caldera occurs on relatively immature, rougher fault structures, compared to more planar faults outside. Our results provide additional context for understanding seismicity in hydrothermal systems, highlighting the key role played by long-term fluid diffusion processes in driving the occurrence of earthquake swarms.

Idaho, Montana, Wyoming↗

USGS2025

A northeast-dipping zone of low frequency earthquakes at the southern edge of Cascadia subduction

Tectonic tremor monitoring occasionally detects events in an anomalous zone in southern Cascadia, 50–100 km west of the main tremor band, near the expected southern edge of the subducting Gorda slab at the Mendocino triple junction. To investigate the geometry and temporal behavior of this tremor, we examine its constituent low-frequency earthquakes (LFEs) by developing 27 stacked LFE waveform templates that we use to detect events from 2018 to 2024. We then relocate LFE sources together with regional seismicity. We find that LFE hypocenters form a northeast-dipping alignment at 22–29 km depth, extending eastward from a zone of micro-earthquakes, ∼15 km south of the southern edge of Gorda slab seismicity. These LFE families exhibit small bursts of activity every few days. Considering the strong world-wide association of tremor and LFEs with high slip-rate, plate-bounding faults, we hypothesize these LFEs may demark the southern edge of Cascadia subduction.

California↗

USGS2025

Surface-wave relocation and characterization of the October 2023 tsunamigenic seismic unrest near Sofugan volcano, Izu Islands, Japan

A moderate-magnitude earthquake swarm occurred in the remote Izu Islands region of Japan between October 1 and 8, 2023. The swarm included 151 shallow earthquakes cataloged by the U.S. Geological Survey, which notably included a roughly 2.5-hr episode of 15 successive magnitude (M) < 5.5 earthquakes. Origin times were coincident with regionally recorded tsunami waves, but tsunamigenesis for moderate-magnitude earthquakes is uncommon, indicating that volcanic activity generated the ocean displacements. Leveraging a surface-wave relative relocation approach, we estimate precise epicentroid locations for the remote swarm. Final epicentroids and caldera analogs indicate a three-stage model to explain swarm activity: (a) caldera pressurization due to magma intrusion, (b) depressurization via dike propagation away from the caldera, and (c) eruption corresponding with caldera reactivation either by collapse or additional intrusion.

Sofugan volcano, Izu Islands↗

USGS2025

Ultralong, supershear rupture of the 2025 Mw 7.7 Mandalay earthquake reveals unaccounted risk

The 28 March 2025 moment magnitude ( M w ) 7.7 earthquake in Mandalay, Burma (Myanmar), ruptured 475 kilometers of the Sagaing Fault, which was more than twice the length predicted by magnitude scaling relationships. Kinematic slip models and observation of a Rayleigh Mach wave that passed through parts of Thailand confirmed that rupture occurred at supershear velocities of greater than 5 kilometers per second. The anomalous length exposed a vast population to violent near-fault shaking. The Mandalay earthquake is a modern analog for the M w 7.9 1906 San Francisco earthquake, another atypically long and fast rupture. Probabilistic seismic hazard analyses use scaling relations that do not account for such long ruptures at moderate magnitudes. This limitation, in conjunction with a likely increased population and infrastructure exposure for atypically long ruptures, contributes to a potential mischaracterization of seismic risk.

Mandalay↗

USGS2025

Probing lower-crustal fault properties with frequency-dependent tidal tremor triggering

The way seismicity responds to periodic stress perturbations offers crucial insights into the processes that can trigger an earthquake. Laboratory and theoretical analyses have shown that the period of imposed forcing and source properties affect the sensitivity to triggering, but frequency-dependent triggering of tectonic faults is poorly understood. The rate of low-frequency earthquakes (LFEs) near Parkfield, California has been found to be strongly correlated with solid earth tides. Tidal forcing acts over multiple frequencies, and the sensitivity to tidal triggering of LFEs therefore provides a unique opportunity to probe the physics of earthquake triggering and underlying fault properties. Here, we find that the response of LFEs to solid earth tides at diurnal and semi-diurnal frequencies is highly variable but spatially coherent along the San Andreas Fault. Using rate-state friction modeling, we find that the variation of the amplitude of tidal modulation is mainly affected by the spatial variation of the background effective normal stress, whereas the spatially varied tidal modulation at diurnal and semi-diurnal frequencies is mainly affected by the fault frictional property. The spatial variations of the LFE response reveal a heterogeneous lower-crustal geologic structure and complex physical faulting processes below the rupture zone of eventual great earthquakes.

California↗