Search USGS⌕ Search

Geology topics

David L. Campbell

Publications and source records attributed to David L. Campbell.

At least 19 recordsLinked to original sources
USGS2001

Laboratory measurements of electrical properties of composite mine dump samples from Colorado and New Mexico

Individual mine waste samples were collected and combined to form one composite sample at each of eight mine dump sites in Colorado and New Mexico. The samples were air-dried and sieved to determine the geochemical composition of their <2mm size fraction. Splits of the samples were then rehydrated and their electrical properties were measured in the US Geological Survey Petrophysical Laboratory, Denver, Colorado (PetLab). The PetLab measurements were done twice: in 1999, using convenient amounts of rehydration water ranging from 5% to 8%; and in 2000, using carefully controlled rehydrations to 5% and 10% water. This report gives geochemical analyses of the <2mm size fraction of the composite samples (Appendix A), PetLab graphs of the 1999 measurements (Appendix B), Petlab graphs of the 2000 measurements (Appendix C), and Cole-Cole models of the PetLab data from the 2000 measurements (Appendix D).

Colorado↗
USGS2000

Magnetic and GPR surveys of a former munitions foundry site at the Denver Federal Center

We made magnetometer and ground penetrating radar (GPR) surveys over part of the foundation of a World War II-era foundry located on the Denver Federal Center. The site contains a number of highly magnetic source bodies, concrete foundation walls, and underground openings, buried under a clay cap. The cap is several feet thick and has a conductivity of about 35 mS/m, making the features underneath it a poor target for conventional GPR. Indeed, the raw data look unlike typical GPR data, but rather show reverberation (?) bands under sidewalks and other shallow buried sources. Using a newly-written computer package, we made plan maps of the GPR response at different time slices. The sliced GPR data did not outline buried foundry foundations, as we had hoped it might. The resulting plan maps of the sliced data show sidewalks and other blobby features, some of which correspond to magnetometer highs.

Colorado↗
USGS1999

Aeromagnetic and Gravity Maps of the Central Marysvale Volcanic Field, Southwestern Utah

Gravity and aeromagnetic features in the Marysvale volcanic field result from the composite effects of many factors, including rock composition, style of magmatic emplacement, type and intensity of rock alteration, and effects of structural evolution. Densities and magnetic properties measured on a suite of rock samples from the Marysvale volcanic field differ in systematic ways. Generally, the measured densities, magnetic susceptibilities, and natural remanent magnetizations all increase with mafic index, but decrease with degree of alteration, and for tuffs, with degree of welding. Koenigsberger Q indices show no such systematic trends. The study area is divided into three geophysical domains. The northern domain is dominated by aeromagnetic lows that probably reflect reversed-polarity volcanic flows. There are no intermediate-sized magnetic highs in the northern domain that might reflect plutons. The northern domain has a decreasing-to-the-south gravity gradient that reflects the Pavant Range homocline. The central domain has gravity lows that reflect altered rocks in calderas and low-density plutons of the Marysvale volcanic field. Its aeromagnetic signatures consist of rounded highs that reflect plutons and birdseye patterns that reflect volcanic flows. In many places the birdseyes are attenuated, indicating that the flows there have been hydrothermally altered. We interpret the central domain to reflect an east-trending locus of plutons in the Marysvale volcanic field. The southern domain has intermediate gravity fields, indicating somewhat denser rocks there than in the central domain, and high-amplitude aeromagnetic birdseyes that reflect unaltered volcanic units. The southern domain contains no magnetic signatures that we interpret to reflect plutons. Basin-and-range tectonism has overprinted additional gravity features on the three domains. A deep gravity low follows the Sevier and Marysvale Valleys, reflecting grabens there. The gravity gradient in the north reflects the southern flank of a structural dome that led to the Pavant Range homocline and whose southern edge lies along the Clear Creek downwarp.

IMAP↗
USGS1998

Depth of the base of the Jackson aquifer, based on geophysical exploration, southern Jackson Hole, Wyoming, USA

A geophysical survey was conducted to determine the depth of the base of the water-table aquifer in the southern part of Jackson Hole, Wyoming, USA. Audio-magnetotellurics (AMT) measurements at 77 sites in the study area yielded electrical-resistivity logs of the subsurface, and these were used to infer lithologic changes with depth. A 100–600 ohm-m geoelectric layer, designated the Jackson aquifer, was used to represent surficial saturated, unconsolidated deposits of Quaternary age. The median depth of the base of the Jackson aquifer is estimated to be 200 ft (61 m), based on 62 sites that had sufficient resistivity data. AMT-measured values were kriged to predict the depth to the base of the aquifer throughout the southern part of Jackson Hole. Contour maps of the kriging predictions indicate that the depth of the base of the Jackson aquifer is shallow in the central part of the study area near the East and West Gros Ventre Buttes, deeper in the west near the Teton fault system, and shallow at the southern edge of Jackson Hole. Predicted, contoured depths range from 100 ft (30 m) in the south, near the confluences of Spring Creek and Flat Creek with the Snake River, to 700 ft (210 m) in the west, near the town of Wilson, Wyoming.

Wyoming↗
USGS1997

Tests of ground-penetrating radar and induced polarization for mapping fluvial mine tailings on the floor of the Couer d'Alene River, Idaho

In order to investigate sequences of toxic mine tailings that have settled in the bed of the Coeur d'Alene River, Idaho, (see figure 1) we improvised ways to make geophysical measurements on the river floor. To make ground penetrating radar (GPR) profiles, we mounted borehole antennas on a skid that was towed along the river bottom. To make induced polarization (IP) profiles, we devised a bottom streamer from a garden hose, lead strips, PVC standoffs, and insulated wire. Each approach worked and provided uniquely different information about the buried toxic sediments. GPR showed shallow stratigraphy, but did not directly detect the presence of contaminating metals. IP showed a zone of high chargeability that is probably due to pockets of relatively higher metal content. Neither method was able to define the base of the fluvial tailings section, at least in part because the IP streamer was deliberately designed to sample only the top three meters of sediments to maximize horizontal resolution.

Idaho↗