Search USGS⌕ Search

Geology topics

David A. Ponce

Publications and source records attributed to David A. Ponce.

At least 37 records · Page 2Linked to original sources
USGS2014

Subsurface geometry of the San Andreas-Calaveras fault junction: Influence of serpentinite and the Coast Range Ophiolite

While an enormous amount of research has been focused on trying to understand the geologic history and neotectonics of the San Andreas-Calaveras fault (SAF-CF) junction, fundamental questions concerning fault geometry and mechanisms for slip transfer through the junction remain. We use potential-field, geologic, geodetic, and seismicity data to investigate the 3-D geologic framework of the SAF-CF junction and identify potential slip-transferring structures within the junction. Geophysical evidence suggests that the San Andreas and Calaveras fault zones dip away from each other within the northern portion of the junction, bounding a triangular-shaped wedge of crust in cross section. This wedge changes shape to the south as fault geometries change and fault activity shifts between fault strands, particularly along the Calaveras fault zone (CFZ). Potential-field modeling and relocated seismicity suggest that the Paicines and San Benito strands of the CFZ dip 65° to 70° NE and form the southwest boundary of a folded 1 to 3 km thick tabular body of Coast Range Ophiolite (CRO) within the Vallecitos syncline. We identify and characterize two steeply dipping, seismically active cross structures within the junction that are associated with serpentinite in the subsurface. The architecture of the SAF-CF junction presented in this study may help explain fault-normal motions currently observed in geodetic data and help constrain the seismic hazard. The abundance of serpentinite and related CRO in the subsurface is a significant discovery that not only helps constrain the geometry of structures but may also help explain fault behavior and the tectonic evolution of the SAF-CF junction.

California↗
USGS2014

Magnetic and gravity studies of Mono Lake, east-central, California

From August 26 to September 5, 2011, the U.S. Geological Survey (USGS) collected more than 600 line-kilometers of shipborne magnetic data on Mono Lake, 20 line-kilometers of ground magnetic data on Paoha Island, 50 gravity stations on Paoha and Negit Islands, and 28 rock samples on Paoha and Negit Islands, in east-central California. Magnetic and gravity investigations were undertaken in Mono Lake to study regional crustal structures and to aid in understanding the geologic framework, in particular regarding potential geothermal resources and volcanic hazards throughout Mono Basin. Furthermore, shipborne magnetic data illuminate local structures in the upper crust beneath Mono Lake where geologic exposure is absent. Magnetic and gravity methods, which sense contrasting physical properties of the subsurface, are ideal for studying Mono Lake. Exposed rock units surrounding Mono Lake consist mainly of Quaternary alluvium, lacustrine sediment, aeolian deposits, basalt, and Paleozoic granitic and metasedimentary rocks (Bailey, 1989). At Black Point, on the northwest shore of Mono Lake, there is a mafic cinder cone that was produced by a subaqueous eruption around 13.3 ka. Within Mono Lake there are several small dacite cinder cones and flows, forming Negit Island and part of Paoha Island, which also host deposits of Quaternary lacustrine sediments. The typical density and magnetic properties of young volcanic rocks contrast with those of the lacustrine sediment, enabling us to map their subsurface extent.

California↗
USGS2013

Regional geophysical expression of a carbonatite terrane in the eastern Mojave Desert, California

A world-class, rare earth element carbonatite deposit is located near Mountain Pass, in the eastern Mojave Desert of California and is hosted by Proterozoic rocks that extend along the eastern margins of the Clark Mountain Range, Mescal Range, and Ivanpah Mountains in a north-northwest trending fault-bounded block. This Proterozoic block is generally composed of a complex of 1.7 - 1.6 Ga gneisses and schists that are intruded by ~1.4 Ga carbonatite and ultrapotassic mafic dikes. In the latter suite, common intrusive rock types include shonkinite, syenite, and alkali granites that are associated with carbonatite dikes. Regional geophysical data reveal that the carbonatite deposit itself occurs along the northeast edge of a prominent magnetic high with an amplitude of 200 nanoteslas, which appears to be related to the surrounding Proterozoic block. More than 340 gravity stations and 155 physical property samples were collected to augment existing geophysical data to determine the geophysical and geologic setting of the eastern Mojave Desert carbonatite terrane. Physical properties of representative rock types in the area show that 23 samples of carbonatite ore have an average saturated bulk density of 2,866 with a range of 2,440 to 3,192 kg/m 3 and a magnetic susceptibility of 0.22 with a range of 0.03 to 0.61x 10 -3 SI units, 17 samples of syenite have an average saturated bulk density of 2,670 with a range of 2,555 to 2,788 kg/m 3 and a magnetic susceptibility of 3.50 with a range of 0.19 to 11.46 x 10 -3 SI units, 19 samples of shonkinite dike have an average saturated bulk density of 2,800 with a range of 2,603 to 3,000 kg/m 3 and a magnetic susceptibility of 0.71 with a range of 0.00 to 4.44 x 10 -3 SI units, and 28 samples of Proterozoic gneiss have an average saturated bulk density of 2,734 with a range of 2,574 to 3,086 kg/m 3 and a magnetic susceptibility of 1.23 with a range of 0.01 to 7.48 x 10 -3 SI units. In general, carbonatites have distinctive gravity, magnetic, and radiometric signatures because these deposits are relatively dense, have primary magnetite, and are enriched in thorium or uranium. In this case, because the carbonatite rocks in this Proterozoic terrane are themselves essentially nonmagnetic, they are not the source of the magnetic high associated with the Clark Mountain and Mescal Ranges. Instead, we suggest that weakly to moderately magnetic syenite intrusions or other granitic or metamorphic rocks in the region are the source of the magnetic high. Gravity data indicate that basins within the eastern Mojave carbonatite terrane are complicated. For example, a gravity high in the northern part of Ivanapah Valley suggest that the basin is underlain by shallow basement rocks, whereas the southern part of Ivanpah Valley extends to a depth of about 2 km. Combined gravity, magnetic, and geologic studies improve the current geophysical framework and structural interpretation of the eastern Mojave Desert carbonatite terrane.

California, Nevada↗
USGS2012

Long-term creep rates on the Hayward Fault: Evidence for controls on the size and frequency of large earthquakes

The Hayward fault (HF) in California exhibits large (Mw 6.5–7.1) earthquakes with short recurrence times (161±65 yr), probably kept short by a 26%–78% aseismic release rate (including postseismic). Its interseismic release rate varies locally over time, as we infer from many decades of surface creep data. Earliest estimates of creep rate, primarily from infrequent surveys of offset cultural features, revealed distinct spatial variation in rates along the fault, but no detectable temporal variation. Since the 1989 Mw 6.9 Loma Prieta earthquake (LPE), monitoring on 32 alinement arrays and 5 creepmeters has greatly improved the spatial and temporal resolution of creep rate. We now identify significant temporal variations, mostly associated with local and regional earthquakes. The largest rate change was a 6‐yr cessation of creep along a 5‐km length near the south end of the HF, attributed to a regional stress drop from the LPE, ending in 1996 with a 2‐cm creep event. North of there near Union City starting in 1991, rates apparently increased by 25% above pre‐LPE levels on a 16‐km‐long reach of the fault. Near Oakland in 2007 an Mw 4.2 earthquake initiated a 1–2 cm creep event extending 10–15 km along the fault. Using new better‐constrained long‐term creep rates, we updated earlier estimates of depth to locking along the HF. The locking depths outline a single, ∼50‐km‐long locked or retarded patch with the potential for an Mw∼6.8 event equaling the 1868 HF earthquake. We propose that this inferred patch regulates the size and frequency of large earthquakes on HF.

California↗
USGS2012

Geophysical studies in the vicinity of Blue Mountain and Pumpernickel Valley near Winnemucca, north-central Nevada

From May 2008 to September 2009, the U.S. Geological Survey (USGS) collected data from more than 660 gravity stations, 100 line-km of truck-towed magnetometer traverses, and 260 physical-property sites in the vicinity of Blue Mountain and Pumpernickel Valley, northern Nevada (fig. 1). Gravity, magnetic, and physical-property data were collected to study regional crustal structures as an aid to understanding the geologic framework of the Blue Mountain and Pumpernickel Valley areas, which in general, have implications for mineral- and geothermal-resource investigations throughout the Great Basin.

Nevada↗
USGS2011

Geophysical setting of the February 21, 2008 Mw 6 Wells earthquake, Nevada, and implications for earthquake hazards

We utilize gravity and magnetic methods to investigate the regional geophysical setting of the Wells earthquake. In particular, we delineate major crustal structures that may have played a role in the location of the earthquake and discuss the geometry of a nearby sedimentary basin that may have contributed to observed ground shaking. The February 21, 2008 M w 6.0 Wells earthquake, centered about 10 km northeast of Wells, Nevada, caused considerable damage to local buildings, especially in the historic old town area. The earthquake occurred on a previously unmapped normal fault and preliminary relocated events indicate a fault plane dipping about 55 degrees to the southeast. The epicenter lies near the intersection of major Basin and Range normal faults along the Ruby Mountains and Snake Mountains, and strike-slip faults in the southern Snake Mountains. Regionally, the Wells earthquake epicenter is aligned with a crustal-scale boundary along the edge of a basement gravity high that correlates to the Ruby Mountains fault zone. The Wells earthquake also occurred near a geophysically defined strike-slip fault that offsets buried plutonic rocks by about 30 km. In addition, a new depth-to-basement map, derived from the inversion of gravity data, indicates that the Wells earthquake and most of its associated aftershock sequence lie below a small oval- to rhomboid-shaped basin, that reaches a depth of about 2 km. Although the basin is of limited areal extent, it could have contributed to increased ground shaking in the vicinity of the city of Wells, Nevada, due to basin amplification of seismic waves.

Nevada↗
USGS2010

Ground-motion modeling of Hayward fault scenario earthquakes, part I: Construction of the suite of scenarios

We construct kinematic earthquake rupture models for a suite of 39 M w 6.6-7.2 scenario earthquakes involving the Hayward, Calaveras, and Rodgers Creek faults. We use these rupture models in 3D ground-motion simulations as discussed in Part II (Aagaard et al. , 2010) to provide detailed estimates of the shaking for each scenario. We employ both geophysical constraints and empirical relations to provide realistic variation in the rupture dimensions, slip heterogeneity, hypocenters, rupture speeds, and rise times. The five rupture lengths include portions of the Hayward fault as well as combined rupture of the Hayward and Rodgers Creek faults and the Hayward and Calaveras faults. We vary rupture directivity using multiple hypocenters, typically three per rupture length, yielding north-to-south rupture, bilateral rupture, and south-to-north rupture. For each rupture length and hypocenter, we consider multiple random distributions of slip. We use two approaches to account for how aseismic creep might reduce coseismic slip. For one subset of scenarios, we follow the slip-predictable approach and reduce the nominal slip in creeping regions according to the creep rate and time since the most recent earthquake, whereas for another subset of scenarios we apply a vertical gradient to the nominal slip in creeping regions. The rupture models include local variations in rupture speed and use a ray-tracing algorithm to propagate the rupture front. Although we are not attempting to simulate the 1868 Hayward fault earthquake in detail, a few of the scenarios are designed to have source parameters that might be similar to this historical event.

Bulletin of the Seismological Society of America↗
USGS2010

The northwestern margin of the Basin and Range province: Part 2: Structural setting of a developing basin from seismic and potential field data

Surprise Valley in northeastern California offers an ideal opportunity to examine the structural setting of a developing extensional basin due to its late Miocene to recent activity in isolation from other major normal fault-bound basins. Seismic velocity and potential field modeling help determine the nature of basin fill and identify intra-basin faults. Based on a detailed gravity and magnetic profile, we identify shallow subsurface basalt flows and several faults within the valley that may accommodate hundreds of meters of vertical offset, possibly cutting and offsetting the ~ 30° east-dipping Surprise Valley fault that rotated during footwall tilting of the adjacent Warner Mountains. Some of these intra-basin faults correspond with mapped Quaternary fault scarps, but others have no surface expression. These faults may represent the currently active fault system within the basin. If so, they would indicate that basin development is transitioning away from the main range-front normal fault to a new set of steep intra-basin faults that are more favorable for accommodating regional transtensional strain.

California↗
USGS2010

Anomalously low strength of serpentinite sheared against granite and implications for creep on the Hayward and Calaveras Faults

Serpentinized ophiolitic rocks are juxtaposed against quartzofeldspathic rocks at depth across considerable portions of the Hayward and Calaveras Faults. The marked compositional contrast between these rock types may contribute to fault creep that has been observed along these faults. To investigate this possibility, we are conducting hydrothermal shearing experiments to look for changes in frictional properties resulting from the shear of ultramafic rock juxtaposed against quartzose rock units. In this paper we report the first results in this effort: shear of bare-rock surfaces of serpentinite and granite, and shear of antigorite-serpentinite gouge between forcing blocks of granitic rock. All experiments were conducted at 250°C. Serpentinite sheared against granite at 50 MPa pore-fluid pressure is weaker than either rock type separately, and the weakening is significantly more pronounced at lower shearing rates. In contrast, serpentinite gouge sheared dry between granite blocks is as strong as the bare granite surface. We propose that the weakening is the result of a solution-transfer process involving the dissolution of serpentine minerals at grain-to-grain contacts. Dissolution of serpentine is enhanced by modifications to pore-fluid chemistry caused by interaction of the fluid with the quartz-bearing rocks. The compositional differences between serpentinized ultramafic rocks of the Coast Range Ophiolite and quartzofeldspathic rock units such as those of the Franciscan Complex may provide the mechanism for aseismic slip (creep) in the shallow crust along the Hayward, Calaveras, and other creeping faults in central and northern California.

Conference Paper↗
USGS2009

Physical-Property Measurements on Core samples from Drill-Holes DB-1 and DB-2, Blue Mountain Geothermal Prospect, North-Central Nevada

From May to June 2008, the U.S. Geological Survey (USGS) collected and measured physical properties on 36 core samples from drill-hole Deep Blue No. 1 (DB-1) and 46 samples from drill-hole Deep Blue No. 2 (DB-2) along the west side of Blue Mountain about 40 km west of Winnemucca, Nev. These data were collected as part of an effort to determine the geophysical setting of the Blue Mountain geothermal prospect as an aid to understanding the geologic framework of geothermal systems throughout the Great Basin. The physical properties of these rocks and other rock types in the area create a distinguishable pattern of gravity and magnetic anomalies that can be used to infer their subsurface geologic structure. Drill-holes DB-1 and DB-2 were spudded in alluvium on the western flank of Blue Mountain in 2002 and 2004, respectively, and are about 1 km apart. Drill-hole DB-1 is at a ground elevation of 1,325 m and was drilled to a depth of 672 m and drill-hole DB-2 is at a ground elevation of 1,392 m and was drilled to a depth of 1522 m. Diameter of the core samples is 6.4 cm. These drill holes penetrate Jurassic and Triassic metasedimentary rocks predominantly consisting of argillite, mudstone, and sandstone; Tertiary diorite and gabbro; and younger Tertiary felsic dikes.

Open-File Report↗
USGS2009

Geophysical Studies in the Vicinity of the Warner Mountains and Surprise Valley, Northeast California, Northwest Nevada, and Southern Oregon

From May 2006 to August 2007, the U.S. Geological Survey (USGS) collected 793 gravity stations, about 102 line-kilometers of truck-towed and ground magnetometer data, and about 325 physical-property measurements in northeastern California, northwestern Nevada, and southern Oregon. Gravity, magnetic, and physical-property data were collected to study regional crustal structures and geology as an aid to understanding the geologic framework of the Surprise Valley geothermal area and, in general, geothermal systems throughout the Great Basin. The Warner Mountains and Surprise Valley mark the transition from the extended Basin and Range province to the unextended Modoc Plateau. This transition zone, in the northwestern corner of the Basin and Range, is relatively diffuse compared to other, more distinct boundaries, such as the Wasatch front in Utah and the eastern Sierran range front. In addition, this transition zone is the site of a geothermal system with potential for development, and previous studies have revealed a complex structural setting consisting of several obliquely oriented fault sets. As a result, this region has been the subject of several recent geological and geophysical investigations. The gravity and magnetic data presented here support and supplement those studies, and although the study area is composed predominantly of Tertiary volcanic rocks of the Modoc Plateau rocks, the physical properties of these and others rocks create a distinguishable pattern of gravity and magnetic anomalies that can be used to infer subsurface geologic structure.

Open-File Report↗
USGS2008

A prominent geophysical feature along the northern Nevada rift and its geologic implications, north-central Nevada

We consider the origin and character of a prominent large-scale geophysical feature in north-central Nevada that is coincident with the western margin of the northern Nevada rift—a mid-Miocene rift that includes mafic dike swarms and associated volcanic rocks expressed by a NNW-striking magnetic anomaly. The geophysical feature also correlates with mid-Miocene epithermal gold deposits and is coincident with the central part of the Battle Mountain–Eureka mineral trend. The Reese River Valley, a 2-km-deep Cenozoic basin, is located along the western margin of this feature and is inferred from the inversion of gravity data to be influenced by, and perhaps in part structurally controlled by, the geophysical feature. Geophysical modeling indicates that the source of the geophysical anomaly must extend to mid-crustal depths, perhaps reflecting a transition from Paleozoic crust in the southwest to Precambrian crust in the northeast, the presence of felsic intrusive rocks in the middle crust, or the edge of mid- to sub-crustal mafic intrusions related to late Tertiary magmatic underplating associated with hotspot magmatism. These cases offer very different possibilities for the age, depth, and origin of the source of the geophysical anomaly, and they present distinct implications for crustal evolution in the northern Great Basin. For example, if the anomaly is due to a pre-Cenozoic basement structure, then its coincidence with the mid-Miocene northern Nevada rift suggests that the trend of the rift was guided by the pre-existing crustal structure. On the other hand, if the anomaly is related to Tertiary mafic intrusions, then the western limit of this magmatism may have been influenced by hotspot fracturing of the crust.

Nevada↗
USGS2007

Relatively simple through-going fault planes at large-earthquake depth may be concealed by the surface complexity of strike-slip faults

At the surface, strike-slip fault stepovers, including abrupt fault bends, are typically regions of complex, often disconnected faults. This complexity has traditionally led geologists studying the hazard of active faults to consider such stepovers as important fault segment boundaries, and to give lower weight to earthquake scenarios that involve rupture through the stepover zone. However, recent geological and geophysical studies of several stepover zones along the San Andreas fault system in California have revealed that the complex nature of the fault zone at the surface masks a much simpler and direct connection at depths associated with large earthquakes (greater than 5 km). In turn, the simplicity of the connection suggests that a stepover zone would provide less of an impediment to through-going rupture in a large earthquake, so that the role of stepovers as segment boundaries has probably been overemphasized. However, counter-examples of fault complexity at depth associated with surface stepovers are known, so the role of stepovers in fault rupture behaviour must be carefully established in each case.

California↗
USGS2007

Three-dimensional geologic model of the northern Nevada rift and the Beowawe geothermal system, north-central Nevada

A three-dimensional (3D) geologic model of part of the northern Nevada rift encompassing the Beowawe geothermal system was developed from a series of two-dimensional (2D) geologic and geophysical models. The 3D model was constrained by local geophysical, geologic, and drill-hole information and integrates geologic and tectonic interpretations for the region. It places important geologic constraints on the extent and configuration of the active Beowawe geothermal system. The geologic framework represented in this model facilitates hydrologic modeling of the Beowawe geothermal system and evaluation of fluid flow in faults and adjacent rock units. Basin depths were determined using an iterative gravity-inversion technique that calculates the thickness of low-density, basin-filling deposits. The remaining subsurface structure was modeled using 2D potential-field modeling software. Crustal cross sections from the 2D models were generalized for use in the 3D model and consist of six stratigraphic layers defined as low-density basin sediments, volcanic rocks, basalt-andesite rocks of the northern Nevada rift, Jurassic and Cretaceous intrusive rocks, and Paleozoic siliceous and carbonate sedimentary rocks of the upper and lower plates of the Roberts Mountains allochthon, respectively. This simplified stratigraphy was combined with mapped surface geology and was extrapolated across the 3D model area. Features along the northern Nevada rift depicted by the model may represent preexisting crustal structures that controlled the locations and character of Tertiary tectonic and magmatic events related to Basin and Range extension and emplacement of the middle Miocene northern Nevada rift. Several of the geologic features represented are important components of the Beowawe geothermal system. Prominent ENE-trending faults (e.g., Malpais fault) that bound the southern edge of Whirlwind Valley, and older NNW-striking faults (e.g., Dunphy Pass and Muleshoe faults) that form major features of the model, are likely important pathways for geothermal fluids and groundwater flow from the Humboldt River, which may recharge the Beowawe system.

Nevada↗
USGS2007

Geophysical framework investigations influencing ground-water resources in east-central Nevada and west-central Utah, with a section on geologic and geophysical basin by basin descriptions

A geophysical investigation was undertaken as part of an effort to characterize the geologic framework influencing ground-water resources in east-central Nevada and west-central Utah. New gravity data were combined with existing aeromagnetic, drill-hole, and geologic data to help determine basin geometry, infer structural features, estimate depth to pre-Cenozoic basement rocks, and further constrain the horizontal extents of exposed and buried plutons. In addition, a three-dimensional (3D) geologic model was constructed to help illustrate the often complex geometries of individual basins and aid in assessing the connectivity of adjacent basins. In general, the thirteen major valleys within the study area have axes oriented north-south and frequently contain one or more sub-basins. These basins are often asymmetric and typically reach depths of 2 km. Analysis of gravity data helped delineate geophysical lineaments and accommodation zones. Structural complexities may further compartmentalize ground-water flow within basins and the influence of tectonics on basin sedimentation further complicates their hydrologic properties. The horizontal extent of exposed and, in particular, buried plutons was estimated over the entire study area. The location and subsurface extents of these plutons will be very important for regional water resource assessments, as these features may act as either barriers or pathways for groundwater flow. A previously identified basement gravity low strikes NW within the study area and occurs within a highly extended terrane between the Butte and Confusion synclinoria. Evidence from geophysical, geologic, and seismic reflection data suggests relatively lower density plutonic rocks may extend to moderate crustal depths and rocks of similar composition may be the source of the entire basement gravity anomaly.

Nevada, Utah↗