Search USGS⌕ Search

Geology topics

David A. John

Publications and source records attributed to David A. John.

At least 55 records · Page 3Linked to original sources

Hydrothermal alteration of the Late Eocene Caetano ash-flow caldera, north-central Nevada: A field and ASTER remote sensing study

Geologic mapping and analysis of ASTER remote sensing data were used to define the effects of a large hydrothermal system in the 12–18 by 22 km Caetano caldera. The caldera formed at ~33.8Ma during eruption of >1100km 3 of the rhyolitic Caetano Tuff that left a 1 km deep basin which was partly filled by a lake. Magma resurgence resulted in shallow(<1 km) emplacement of the Redrock Canyon granite porphyry intrusion into caldera fill in the southwestern part of the caldera. Field and petrographic studies indicate that heat from the pluton or from deeper residual Caetano magma caused a large hydrothermal system to form that altered both the pluton and intracaldera Caetano Tuff throughout the western half of the caldera. ASTER-based mineral mapping shows that the most intense alteration, including local alunite, developed primarily along the southwestern and western caldera margins. Alteration was most intense in the Redrock Canyon intrusion itself and in the upper unit of the Caetano Tuff, which is a sequence of thin ash flows interlayered with finely bedded sedimentary rocks and mesobreccia. Hydrothermally altered intracaldera tuff was domed and crosscut by the unaltered 33.78 ± 0.05 Ma Carico Lake pluton, indicating that caldera formation, magma resurgence, pluton emplacement, and hydrothermal activity all occurred in less than about 100 ka.

Nevada↗

A preliminary study of older hot spring alteration in Sevenmile Hole, Grand Canyon of the Yellowstone River, Yellowstone Caldera, Wyoming

Erosion in the Grand Canyon of the Yellowstone River, Yellowstone Caldera (640 ka), Wyoming, has exposed a cross section of older hydrothermal alteration in the canyon walls. The altered outcrops of the post-collapse tuff of Sulphur Creek (480 ka) extend from the canyon rim to more than 300 m beneath it. The hydrothermal minerals are zoned, with an advanced argillic alteration consisting of an association of quartz (opal) + kaolinite ± alunite ± dickite, and an argillic or potassic alteration association with quartz + illite ± adularia. Disseminated fine-grained pyrite or marcasite is ubiquitous in both alteration types. These alteration associations are characteristic products of shallow volcanic epithermal environments. The contact between the two alteration types is about 100 m beneath the rim. By analogy to other active geothermal systems including active hydrothermal springs in the Yellowstone Caldera, the transition from kaolinite to illite occurred at temperatures in the range 150 to 170 °C. An 40 Ar/ 39 Ar age on alunite of 154,000 ± 16,000 years suggests that hydrothermal activity has been ongoing since at least that time. A northwest-trending linear array of extinct and active hot spring centers in the Sevenmile Hole area implies a deeper structural control for the upflowing hydrothermal fluids. We interpret this deeper structure to be the Yellowstone Caldera ring fault that is covered by the younger tuff of Sulphur Creek. The Sevenmile Hole altered area lies at the eastern end of a band of hydrothermal centers that may mark the buried extension of the Yellowstone Caldera ring fault across the northern part of the Caldera.

Wyoming↗

Geochemical database for igneous rocks of the ancestral Cascades Arc— Southern segment, California and Nevada

Volcanic rocks that form the southern segment of the Cascades magmatic arc are an important manifestation of Cenozoic subduction and associated magmatism in western North America. Until recently, these rocks had been little studied and no systematic compilation of existing composition data had been assembled. This report is a compilation of all available chemical data for igneous rocks that constitute the southern segment of the ancestral Cascades magmatic arc and complement a previously completed companion compilation that pertains to rocks that constitute the northern segment of the arc. Data for more than 2,000 samples from a diversity of sources were identified and incorporated in the database. The association between these igneous rocks and spatially and temporally associated mineral deposits is well established and suggests a probable genetic relationship. The ultimate goal of the related research is an evaluation of the time-space-compositional evolution of magmatism associated with the southern Cascades arc segment and identification of genetic associations between magmatism and mineral deposits in this region.

California, Nevada↗

Mineral-resource assessment of northern Nye County, Nevada— A progress report

The U.S. Geological Survey (USGS), University of Nevada, Las Vegas (UNLV), and Nevada Bureau of Mines and Geology (NBMG), which is a part of the University of Nevada, Reno (UNR), have completed the first year of data collection and analysis in preparation for a new mineral- and energy-resource assessment of northern Nye County, Nevada. This report provides information about work completed before October 1, 2009. Existing data are being compiled, including geology, geochemistry, geophysics, and mineral-deposit information. Field studies are underway, which are primarily designed to address issues raised during the review of existing information. In addition, new geochemical studies are in progress, including reanalyzing existing stream-sediment samples with modern methods, and analyzing metalliferous black shales.

Nevada↗

Large-magnitude Miocene extension of the Eocene Caetano caldera, Shoshone and Toiyabe Ranges, Nevada

Because major mineral deposits in north-central Nevada predate significant Basin and Range extension, a detailed understanding of the timing and kinematics of extensional faulting is necessary to place these deposits in their original structural context. The complexity of pre-Cenozoic deformation in northern Nevada makes restoring Basin and Range faulting difficult without locating well-dated, regionally extensive Cenozoic units that can be used to restore slip along normal faults. The goal of this study is to reconstruct extensional faulting in the Shoshone and northern Toiyabe Ranges by using Cenozoic rocks in and around the Caetano caldera, which formed ca. 33.8 Ma during eruption of the Caetano Tuff. The caldera filled with more than 4 km of intracaldera tuff during initial caldera-forming eruptions, and additional sedimentary and volcanic rocks subsequently filled the topographic depression left by the caldera collapse. These rocks are conformable over the interval 34–25 Ma, consistent with little, if any, extension during that time. The 34–25 Ma rocks were later cut by a set of closely spaced (1–3 km) normal faults that accommodated significant extension and foot-wall rotations of 40°–50°. Restored structural cross sections indicate that the present ∼42 km (east-west) width of the Caetano caldera has been extended 110%, resulting in 22 ± 3 km westward translation of the Fish Creek Mountains relative to the southern Cortez Range. Major normal faults mapped within the caldera continue south and north along strike into the surrounding Paleozoic basement rocks; therefore it is likely that parts of surrounding areas are also significantly extended. Miocene (16–12 Ma) sedimentary rocks in the hanging walls of major normal faults include both fluvial/lacustrine facies and coarser alluvial fan deposits. Where exposed, the bases of the Miocene sedimentary sections are in angular conformity with underlying ∼40°E tilted 34–25 Ma volcanic and sedimentary rocks. The distribution, composition, and geometry of these deposits are best explained by accumulation in a set of half-graben basins that formed in response to slip on basin-bounding faults. Extension thus appears to have taken place in the middle Miocene, beginning at or shortly after 16 Ma, and was mostly completed by 10–12 Ma. Fault blocks and basins formed during middle Miocene extension are cut by younger, more widely spaced, high-angle normal faults that began forming more recently than 10–12 Ma. These faults outline the modern basins and ranges in the study area and some have remained active into the Holocene.

Nevada↗

Magmatic and tectonic evolution of the Caetano caldera, north-central Nevada: A tilted, mid-Tertiary eruptive center and source of the Caetano Tuff

The Caetano Tuff is a late Eocene, rhyolite ash-flow tuff that crops out within an ∼90-km-long, east-west–trending belt in north-central Nevada, previously interpreted as an elongate graben or “volcano-tectonic trough.” New field, petrographic, geochemical, and geochronologic data show that: (1) the east half of the “trough” is actually the Caetano caldera, formed by eruption of the Caetano Tuff at 33.8 Ma and later structurally dismembered during Miocene extension; (2) the west half of the trough includes both the distinctly younger and unrelated Fish Creek Mountains caldera (ca. 24.7 Ma) and a west-trending paleovalley partly filled with outflow Caetano Tuff; and (3) the Caetano Tuff as previously defined actually consists of three distinct units, two units of the 33.8 Ma Caetano Tuff and an older (34.2 Ma) tuff, exposed north of the Caetano caldera, herein named the tuff of Cove Mine. Miocene extensional faulting and tilting has exposed the Caetano caldera over a paleodepth range of >5 km, from the caldera floor through post-caldera sedimentary rocks, providing exceptional constraints on an evolutionary model of the caldera that are rarely available for other calderas. The Caetano caldera filled with more than 4 km of intracaldera Caetano Tuff, while outflow tuff flowed west and south of the caldera, primarily down Eocene paleovalleys. Caldera fill consists of two units of Caetano Tuff. The lower compound cooling unit is as much as 3600 m thick and is separated by a complete cooling break from a 500–1000-m-thick upper unit that consists of multiple, thin, ash flows interbedded with sedimentary deposits. Multiple granite porphyries, including the 25-km 2 Carico Lake pluton, intruded and domed the center of the caldera within 0.1 Ma of caldera formation; one of these porphyries is associated with pervasive argillic and advanced argillic alteration of the western half of the caldera. All exposed caldera-related rocks are rhyolites or granites (71–77.5 wt% SiO 2 ). Caldera collapse was significantly greater than the thickness of caldera fill and created a topographic depression that served as a depocenter until at least 25 Ma, filling with nearly 1 km of sediments and distally derived, ash-flow tuffs. The caldera is presently exposed in a series of 40–50°, east-tilted blocks bounded by north-striking, west-dipping normal faults that formed after 16 Ma. Slip on these faults accommodated ∼100% E-W extension, making the restored Caetano caldera ∼20 km east-west by 10–18 km north-south. The estimated volume of intracaldera Caetano Tuff is, therefore, ∼840 km 3 , and the minimum estimated total eruptive volume is ∼1100 km 3 . Although the Caetano magmatic system was probably too young to supply heat for nearby Carlin-type gold deposits in the Cortez district, earlier nearby magmatic activity may have contributed to formation of these deposits. Reconstruction of the late Eocene, pre-Caetano caldera geologic setting, immediately prior to caldera formation, indicates that the Cortez Hills and Horse Canyon Carlin-type deposits formed at ≤1 km depths.

Nevada↗

Three-dimensional geologic model of the northern Nevada rift and the Beowawe geothermal system, north-central Nevada

A three-dimensional (3D) geologic model of part of the northern Nevada rift encompassing the Beowawe geothermal system was developed from a series of two-dimensional (2D) geologic and geophysical models. The 3D model was constrained by local geophysical, geologic, and drill-hole information and integrates geologic and tectonic interpretations for the region. It places important geologic constraints on the extent and configuration of the active Beowawe geothermal system. The geologic framework represented in this model facilitates hydrologic modeling of the Beowawe geothermal system and evaluation of fluid flow in faults and adjacent rock units. Basin depths were determined using an iterative gravity-inversion technique that calculates the thickness of low-density, basin-filling deposits. The remaining subsurface structure was modeled using 2D potential-field modeling software. Crustal cross sections from the 2D models were generalized for use in the 3D model and consist of six stratigraphic layers defined as low-density basin sediments, volcanic rocks, basalt-andesite rocks of the northern Nevada rift, Jurassic and Cretaceous intrusive rocks, and Paleozoic siliceous and carbonate sedimentary rocks of the upper and lower plates of the Roberts Mountains allochthon, respectively. This simplified stratigraphy was combined with mapped surface geology and was extrapolated across the 3D model area. Features along the northern Nevada rift depicted by the model may represent preexisting crustal structures that controlled the locations and character of Tertiary tectonic and magmatic events related to Basin and Range extension and emplacement of the middle Miocene northern Nevada rift. Several of the geologic features represented are important components of the Beowawe geothermal system. Prominent ENE-trending faults (e.g., Malpais fault) that bound the southern edge of Whirlwind Valley, and older NNW-striking faults (e.g., Dunphy Pass and Muleshoe faults) that form major features of the model, are likely important pathways for geothermal fluids and groundwater flow from the Humboldt River, which may recharge the Beowawe system.

Nevada↗

USGS science in Menlo Park -- a science strategy for the U.S. Geological Survey Menlo Park Science Center, 2005-2015

In the spring of 2004, the U.S. Geological Survey (USGS) Menlo Park Center Council commissioned an interdisciplinary working group to develop a forward-looking science strategy for the USGS Menlo Park Science Center in California (hereafter also referred to as "the Center"). The Center has been the flagship research center for the USGS in the western United States for more than 50 years, and the Council recognizes that science priorities must be the primary consideration guiding critical decisions made about the future evolution of the Center. In developing this strategy, the working group consulted widely within the USGS and with external clients and collaborators, so that most stakeholders had an opportunity to influence the science goals and operational objectives. The Science Goals are to: Natural Hazards: Conduct natural-hazard research and assessments critical to effective mitigation planning, short-term forecasting, and event response. Ecosystem Change: Develop a predictive understanding of ecosystem change that advances ecosystem restoration and adaptive management. Natural Resources: Advance the understanding of natural resources in a geologic, hydrologic, economic, environmental, and global context. Modeling Earth System Processes: Increase and improve capabilities for quantitative simulation, prediction, and assessment of Earth system processes. The strategy presents seven key Operational Objectives with specific actions to achieve the scientific goals. These Operational Objectives are to: Provide a hub for technology, laboratories, and library services to support science in the Western Region. Increase advanced computing capabilities and promote sharing of these resources. Enhance the intellectual diversity, vibrancy, and capacity of the work force through improved recruitment and retention. Strengthen client and collaborative relationships in the community at an institutional level. Expand monitoring capability by increasing density, sensitivity, and efficiency and reducing costs of instruments and networks. Encourage a breadth of scientific capabilities in Menlo Park to foster interdisciplinary science. Communicate USGS science to a diverse audience.

Circular↗

Assessment of metallic mineral resources in the Humboldt River Basin, Northern Nevada, with a section on Platinum-Group-Element (PGE) potential of the Humboldt mafic complex

The Humboldt River Basin is an arid to semiarid, internally drained basin that covers approximately 43,000 km2 in northern Nevada. The basin contains a wide variety of metallic and nonmetallic mineral deposits and occurrences, and, at various times, the area has been one of the Nation's leading or important producers of gold, silver, copper, mercury, and tungsten. Nevada currently (2003) is the third largest producer of gold in the world and the largest producer of silver in the United States. Current exploration for additional mineral deposits focuses on many areas in northern Nevada, including the Humboldt River Basin.

Nevada↗

A special issue devoted to gold deposits in northern Nevada: Part 2. Carlin-type Deposits

This is the second of two special issues of Economic Geology devoted to gold deposits in northern Nevada. Readers interested in a general overview of these deposits, their economic significance, their context within the tectonic evolution of the region, and synoptic references on each gold deposit type are directed to the preface of the first special issue (John et al., 2003). Volume 98, issue 2, contains five papers that address regional aspects important to the genesis of gold deposits in northern Nevada and five papers that present detailed studies of epithermal deposits and districts. All of the regional papers are pertinent to Carlin-type gold deposits, because they address the age of mineralization (Arehart et al., 2003), origin and evolutionary history of the northwest-striking mineral belts that localize many deposits (Grauch et al., 2003), nature of the middle and lower crust below these mineral belts (Howard, 2003), district- to deposit-scale stream sediment and lithogeochemical anomalies (Theodore et al., 2003), and stratigraphy and structure of a district located along a northeast-striking lineament (Peters et al., 2003). The nine papers in this second special issue focus on an array of problems pertinent to genetic and exploration models for Carlin-type deposits in northern Nevada (Fig. 1). These investigations sort out and characterize the sequence of deformational, igneous, and hydrothermal events in mining districts, constrain the age of mineralization, map paleothermal gradients, identify structures and lithologies that are preferentially mineralized, ascertain processes of ore formation, determine sources of ore fluid components, and define fluid flow paths. A common theme among these papers is inheritance, whereby older features in the mineral belts influence ore formation in subsequent Carlin-type hydrothermal systems. Three types of inheritance are inferred by one or more of these investigations: (1) structural inheritance, where older faults are reactivated during subsequent contractional and/or extensional tectonic events producing permeable fracture systems that focused flow of ore fluids; (2) alteration inheritance, where one or more preore alteration events produced reactive host rocks that are preferentially mineralized; and (3) geochemical inheritance, in which Au and other elements are recycled from older mineralization into younger Carlin-type deposits. Despite the similar age, tectonic setting, alteration types, mineral parageneses, and geochemical signatures of the deposits studied, these papers do not lead to consensus regarding genetic models for Carlin-type deposits. Rather, the separate investigations by different workers, utilizing both similar and unlike approaches, result in markedly different conclusions. Some of this disparity probably is due to real differences in the origin of different districts; however, the opposing conclusions arrived at by investigations on neighboring deposits in a single district are more problematic and most likely are due to difficulties resulting from the superposition of different types and ages of gold mineralization or to substantial variations in the hydrology and proportions of fluid components derived from deep and shallow sources in each deposit. Further work is needed to validate and understand the significance of these differences.

Nevada↗

Chapter C: Hydrothermal Enrichment of Gallium in Zones of Advanced Argillic Alteration-Examples from the Paradise Peak and McDermitt Ore Deposits, Nevada

Gallium is produced as a byproduct from bauxite and zinc sulfide ores and rarely from primary Ga ores. High Ga contents (>60 ppm) can occur in zones of advanced argillic alteration consisting of alunite+kaolinite+quartz associated with quartz-alunite (high sulfidation Au-Ag) deposits. In a magmatic-hydrothermal environment, the zones of advanced argillic alteration associated with quartz-alunite (high sulfidation) Au-Ag deposits have the highest Ga contents (max 120 ppm). In these Au deposits, Ga is enriched in the zone of alunite+kaolinite alteration and depleted in the zone of quartz-rich alteration within acid-leached rocks. Peripheral zones of argillic alteration have Ga contents and Al/Ga ratios similar to those in unaltered volcanic rocks. The zones of advanced argillic alteration that formed in a steam-heated environment in association with hot-spring-type Hg-Au deposits are not Ga enriched, and residual silicified zones have very low Ga contents. The McDermitt Hg and Paradise Peak Au-Hg deposits, Nev., have zones of advanced argillic alteration that are Ga enriched. At the Paradise Peak Au-Hg deposits, Ga is enriched in the zone of alunite+jarosite alteration that formed in a magmatic-hydrothermal environment. Ga is depleted in the zone of opal+alunite alteration formed in a steam-heated environment, in residual silicified zones formed in a magmatic-hydrothermal environment, and in zones of supergene jarosite alteration. At the McDermitt Hg deposit, Ga is enriched in the zone of alunite+kaolinite alteration below the zone of adularia-quartz alteration that coincides with the Hg ore body. The spatial relation of Ga enrichment to alunite-kaolinite alteration suggests that formation in a magmatic-hydrothermal environment. X-ray-absorption spectra of Ga-enriched samples from the McDermitt Hg deposit are similar to that of gallium sulfate and support the association of Ga enrichment with alunite alteration.

Bulletin↗

Field guide to hydrothermal alteration in the White River altered area and in the Osceola Mudflow, Washington

The Cenozoic Cascades arcs of southwestern Washington are the product of long-lived, but discontinuous, magmatism beginning in the Eocene and continuing to the present (for example, Christiansen and Yeats, 1992). This magmatism is the result of subduction of oceanic crust beneath the North American continent. The magmatic rocks are divided into two subparallel, north-trending continental-margin arcs, the Eocene to Pliocene Western Cascades, and the Quaternary High Cascades, which overlies, and is east of, the Western Cascades. Both arcs are calc-alkaline and are characterized by voluminous mafic lava flows (mostly basalt to basaltic andesite compositions) and scattered large stratovolcanoes of mafic andesite to dacite compositions. Silicic volcanism is relatively uncommon. Quartz diorite to granite plutons are exposed in more deeply eroded parts of the Western Cascades Arc (for example, Mount Rainier area and just north of Mt. St. Helens). Hydrothermal alteration is widespread in both Tertiary and Quaternary igneous rocks of the Cascades arcs. Most alteration in the Tertiary Western Cascades Arc resulted from hydrothermal systems associated with small plutons, some of which formed porphyry copper and related deposits, including copper-rich breccia pipes, polymetallic veins, and epithermal gold-silver deposits. Hydrothermal alteration also is present on many Quaternary stratovolcanoes of the High Cascades Arc. On some High Cascades volcanoes, this alteration resulted in severely weakened volcanic edifices that were susceptible to failure and catastrophic landslides. Most notable is the sector collapse of the northeast side of Mount Rainier that occurred about 5,600 yr. B.P. This collapse resulted in formation of the clay-rich Osceola Mudflow that traveled 120 km down valley from Mount Rainier to Puget Sound covering more than 200 km2. This field trip examines several styles and features of hydrothermal alteration related to Cenozoic magmatism in the Cascades arcs. The morning of the trip will examine the White River altered area, which includes high-level alteration related to a large, early Miocene magmatic-hydrothermal system exposed about 10 km east of Enumclaw, Washington. Here, vuggy silica alteration is being quarried for silica and advanced argillic alteration has been prospected for alunite. Clay-filled fractures and sulfide-rich, fine-grained sedimentary rocks of hydrothermal origin locally are enriched in precious metals. Many hydrothermal features common in high-sulfidation gold-silver deposits and in advanced argillic alteration zones overlying porphyry copper deposits (for example, Gustafson and Hunt, 1975; Hedenquist and others, 2000; Sillitoe, 2000) are exposed, although no economic base or precious metal mineralized rock has been discovered to date. The afternoon will be spent examining two exposures of the Osceola Mudflow along the White River. The Osceola Mudflow contains abundant clasts of altered Quaternary rocks from Mount Rainier that show various types of hydrothermal alteration and hydrothermal features. The mudflow matrix contains abundant hydrothermal clay minerals that added cohesiveness to the debris flow and helped allow it to travel much farther down valley than other, noncohesive debris flows from Mount Rainier (Crandell, 1971; Vallance and Scott, 1997). The White River altered area is the subject of ongoing studies by geoscientists from Weyerhaeuser Company and the U.S. Geological Survey (USGS). The generalized descriptions of the geology, geophysics, alteration, and mineralization presented here represent the preliminary results of this study (Ashley and others, 2003). Additional field, geochemical, geochronologic, and geophysical studies are underway. The Osceola Mudflow and other Holocene debris flows from Mount Rainier also are the subject of ongoing studies by the USGS (for example, Breit and others, 2003; John and others, 2003; Plumlee and others, 2003, Sisson and others, 2003; Vallance and others, 2003). Studies of hydrothermal alteration in the Osceola Mudflow are being used to better understand fossil hydrothermal systems on Mount Rainier and potential hazards associated with this alteration.

Washington↗

Geologic Map of the Izzenhood Spring Quadrangle, Lander County, Nevada

The Izzenhood Spring quadrangle covers about 145 km2 of the southwestern part of the Sheep Creek Range in northern Lander County, Nevada. The quadrangle is underlain by Lower Paleozoic rocks that are unconformably overlain and intruded by thick sequences of Miocene igneous rocks related to the northern Nevada rift (Stewart and McKee, 1977; Wallace and John, 1998; John and others, 2000). Much of the eastern part of the quadrangle is covered by thin Quaternary surficial deposits.

IMAP↗

Style and age of late Oligocene-early Miocene deformation in the southern Stillwater Range, west central Nevada: Paleomagnetism, geochronology, and field relations

Paleomagnetic and geochronologic data combined with geologic mapping tightly restrict the timing and character of a late Oligocene to early Miocene episode of large magnitude extension in the southern Stillwater Range and adjacent regions of west central Nevada. The southern Stillwater Range was the site of an Oligocene to early Miocene volcanic center comprising (1) 28.3 to 24.3 Ma intracaldera ash flow tuffs, lava flows, and subjacent plutons associated with three calderas, (2) 24.8 to 20.7 Ma postcaldera silicic dikes and domes, and (3) unconformably overlying 15.3 to 13.0 Ma dacite to basalt lava flows, plugs, and dikes. The caldera-related tuffs, lava flows, and plutons were tilted 60°-70° either west or east during the initial period of Cenozoic deformation that accommodated over 100% extension. Directions of remanent magnetization obtained from these extrusive and intrusive, caldera-related rocks are strongly deflected from an expected Miocene direction in senses appropriate for their tilt. A mean direction for these rocks after tilt correction, however, suggests that they were also affected by a moderate (33.4° ± 11.8°) component of counterclockwise vertical axis rotation. Paleomagnetic data indicate that the episode of large tilting occurred during emplacement of 24.8 to 20.7 Ma postcaldera dikes and domes. In detail, an apparent decrease in rotation with decreasing age of individual, isotopically dated bodies of the postcaldera group indicates that most tilting occurred between 24.4 and 24.2 Ma. The onset of tilting immediately following after the final caldera eruptions suggests that the magmatism and deformation were linked. Deformation was not driven by magma buoyancy, however, because tilting equally affected the caldera systems of different ages, including their plutonic roots. It is more likely that regional extension was focused in the southern Stillwater Range due to magmatic warming and reduction of tensile strength of the brittle crust. Faults that accommodated deformation in the southern Stillwater Range initially dipped steeply and cut deeply to expose more than 9 km of crustal section. The exposed crustal sections are probably rotated blocks above an unexposed basal detachment that lay near the early Miocene brittle-ductile transition.

Journal of Geophysical Research B: Solid Earth↗

Geologic setting and characteristic of mineral deposits in the central Wasatch Mountains, Utah

Base- and precious-metal deposits in the central Wasatch Mountains southeast of Salt Lake City were mined for more than 100 years beginning in 1868. Deposits present in the Park City, Little Cottonwood, and Big Cottonwood mining districts include Ag-Pb-Zn ± Cu ± Au replacements and veins, a low-grade porphyry Cu-Au deposit, Cu-bearing skarns, a quartz monzonite-type (low F) porphyry Mo deposit, and high sulfidation (quartz-alunite) Au deposits. Most production came from polymetallic replacement and vein deposits in the Park City mining district, which has a recorded production of more than 1.4 million oz Au, 253 million oz Ag, 2.7 billion lbs Pb, 1.5 billion lbs Zn, and 129 million lbs Cu from 1872 to 1978. Production in the Little and Big Cottonwood districts, mostly from Pb-Ag replacement deposits, was much smaller. Most mineral deposits in the central Wasatch Mountains are genetically related to the Wasatch igneous belt, a series of high-K calc-alkaline stocks and cogenetic volcanic rocks that formed about 41(?) to 30 Ma. The mineral deposits mostly formed near the end of magmatic activity between about 36 to 31.4 Ma. A subeconomic porphyry Mo deposit in the Little Cottonwood stock is notably younger having formed about 26 to 23.5 Ma. The intrusive rocks were emplaced mostly along the westward extension of the west-trending Uinta arch during a period of NW-SE-directed extension, and much of the mineralization in the Park City district was controlled by ENE-striking normal faults. About 15 degrees of eastward tilting of the central Wasatch Mountains during Late Cenozoic Basin and Range extension has resulted in progressively deeper levels of exposure from <1 km on the east to about 11 km on the west and in profound variations in the types of mineral deposits exposed in different parts of the range. Most deposits formed at paleodepths ≤5 km, and the most productive deposits in the Park City district formed at depths of 1 to 2 km. The porphyry Mo deposit in the Little Cottonwood stock formed at greater depths of about 6 km.

Utah↗

New K-Ar and 40Ar/39Ar ages of plutonism, hydrothermal alteration, and mineralization in the central Wasatch Mountains, Utah

Twenty-one new K-Ar and 10 new 40 Ar/ 39 Ar ages are reported for igneous and hydrothermal minerals from intrusive rocks of the Wasatch igneous belt in the central Wasatch Mountains. Interpretation of our new data combined with previously published K-Ar ages and with new 40 Ar/ 39 Ar and U-Pb ages reported by Vogel et al. (1997) suggests that the Clayton Peak stock was emplaced at about 36 to 35 Ma, the Alta stock at about 35 to 33 Ma, and the Little Cottonwood stock at about 31 to 30 Ma. Biotite K-Ar ages progressively increase from west to east in the Little Cottonwood stock, which is consistent with more rapid cooling of the eastern part of the stock and with other evidence suggesting about 15 degrees of eastward tilting of the central Wasatch Mountains following emplacement of the Wasatch igneous belt. Most porphyry stocks in the Park City mining district were emplaced at about 41 to 40 Ma; the Ontario stock was emplaced at about 36 Ma. Vein deposits in the Park City mining district formed at about 36 to 33 Ma. The Park Premier stock was emplaced in several pulses between about 35 to 32 Ma. Alteration related to porphyry copper mineralization in the Park Premier stock formed at 33.5 Ma and advanced argillic alteration and gold mineralization formed at 31.4 Ma. Molybdenum mineralization in the eastern part of the Little Cottonwood stock formed between 26 to 23.5 Ma.

Utah↗

Day one road log: Mid-Tertiary igneous rocks and mineral deposits in the central Wasatch Mountains, Utah

Today's field trip examines late Eocene and Oligocene granitoid intrusions, cogenetic volcanic rocks (Keetley Volcanics), and associated hydrothermally altered and mineralized rocks in the central Wasatch Mountains. Because of late Cenozoic tilting related to Basin and Range extension, a continuum of mid-Tertiary paleodepths is exposed that ranges from about 11 km on the west side of the Little Cottonwood stock to the actual paleosurface on the east side of the range (Fig. 1; John, 1989a). Consequently, we will see a wide variety of textures and styles of emplacement in the intrusive rocks, and a correspondingly wide variety of hydrothermal alteration types and mineral deposits (Lawton et al., 1980; John, 1989a). Mid-Tertiary igneous rocks in the central Wasatch Mountains consist of three phaneritic stocks exposed in the western and central parts of the range (Little Cottonwood, Alta, and Clayton Peak stocks); six porphyry to fine-grained phaneritic stocks exposed in the middle and eastern parts of the range, primarily in the Park City mining district (Flagstaff, Glencoe, Mayflower, Ontario, Pine Creek, and Valeo stocks); a subvolcanic porphyry complex (Park Premier stock) exposed near the Park Premier mine which is now partly covered by water filling the Jordanelle Reservoir; and coeval volcanic rocks (Keetley Volcanics), subvolcanic intrusions, and a volcanic neck (Indian Hollow plug) are exposed on the east side of the range (Figs. 2 and 3). The intrusive rocks range from coarse-grained, coarsely porphyritic on the west to fine-grained, porphyroaphanitic on the east (John, 1989a). They form a high-K, calc-alkaline series (Vogel

Utah↗