Search USGS⌕ Search

Geology topics

David A. Cacchione

Publications and source records attributed to David A. Cacchione.

12 recordsLinked to original sources

Multibeam data and socio-economic issues in west-central San Francisco Bay

San Francisco Bay is the largest estuary on the conterminous U.S. Pacific Coast and is one of the world's largest natural harbors. It is a biologically productive and diverse environment. San Francisco Bay has a maritime economy that annually generates over $7.5 billion, handles 50 million tons of cargo, and involves thousands of jobs. Recent investigations by the USGS in this estuary help address both socio-economic and scientific issues: *Trimming pinnacles may prevent a calamitous oil spill. *Can San Francisco Bay accept more dredge spoil? *Bay floor biological habitats are quite varied. *How thick and how variable is the sediment fill in central San Francisco Bay?

California↗

Tidal creek changes at the Sonoma Baylands restoration site

Over the past 150 years, human activity has had a major impact on tidal wetlands adjoining the San Francisco Bay-Delta estuary Growing concern about the effect of this change on the ecology of the estuary has prompted Bay area managers to attempt to reclaim tidal wetlands. The Sonoma Baylands Restoration Project is designed to use dredge material to convert 348 acres from farmland to wetland. This paper describes changes to a tidal creek that flows from that restoration site to San Pablo Bay (north San Francisco Bay) through an existing tidal wetland during different phases of the project. Hydrologic measurements near the bottom of the creek and cross-creek profiles show how the creek responded to non-tidal flow conditions introduced by filling the site with dredge materials. At the time of this study, the creek had deepened by approximately 40 cm but had not widened.

Conference Paper↗

Near bottom velocity and suspended solids measurements in San Francisco Bay, California

Ability to accurately measure long-term time-series of turbulent mean velocity distribution within the bottom boundary layer (BBL) in addition to suspended solids concentration (SSC) is critical to understanding complex processes controlling transport, resuspension, and deposition of suspended sediments in bays and estuaries. A suite of instruments, including broad band acoustic Doppler current profilers (BB-ADCPs), capable of making very high resolution measurement of velocity profiles in the BBL, was deployed in the shipping channel of South San Francisco Bay (South Bay), California in an investigation of sediment dynamics during March and April 1995. Results of field measurements provide information to calculate suspended solids flux (SSF) at the site. Calculations show striking patterns; residual SSF varies through the spring-neap tidal cycle. Significant differences from one spring tide to another are caused by differences in tidal current diurnal inequalities. Winds from significant storms establish residual circulation patterns that may affect magnitude of residual SSF more than increased tidal energy at spring tides.

Conference Paper↗

Bottom stress estimates and sand transport on northern California inner continental shelf

Measurements of velocities and light transmission in the bottom boundary layer on the continental shelf off northern California demonstrate the importance of storms in the transport of sediment along the coast and offshore in this region. Time-series estimates of bottom stress obtained from a combined wave-current bottom boundary layer model in which wave and current measurements from the Geoprobe tripod were used as input show high stress values of 10 dynes cm −2 during two distinct storm events in early February and early March, 1991. These stresses induce significant offshore sediment transport, achieving maximum values of about 0.5 g cm −1 s −1 . The net transport over the entire measurement period from 30 January 1991 to 13 March 1991 was along the coast toward the north and offshore. This transport pattern explains slow migration of low amplitude, broad crescentic dunes along and across this portion of the inner continental shelf.

California↗

Bottom current and sediment transport on San Pedro Shelf, California

GEOPROBE (Geological Processes Bottom Environmental) tripods were used to measure bottom currents, pressure, and light transmission and scattering and to obtain time-series photographs of the sea floor at depths of 23 m and 67 m on San Pedro shelf between 18 April and 6 June 1978. Winds were light (< 5 m/s) with a mean direction from the southwest throughout the measurement period. Hourly averaged currents 1 m above the bottom never exceeded 21 cm/s; average speeds were about 5 cm/s at the 23-m site and 6.8 cm/s at 67 m, and the strongest currents were produced by the tides. The mean flow of bottom water was less than 3 cm/s at both GEOPROBES and was rather persistently southward (offshelf). Wave-generated bottom currents and bottom-pressure variations were sampled at hourly intervals; average wave period and wave height were 12.8 s and 0.44 m, respectively, at the 23-m site. Wave orbital velocities ranged from about 5 to 30 cm/s at 23 m and from 2 to 8 cm/s at 67 m. Bottom photographs at 67 m show that the relatively sluggish tide-generated and mean currents were below threshold velocity for the silty, very fine sand throughout the observational period. Threshold depth for wave rippling of very fine sand averaged about 28 m with a range from about 12 m to 50 m. Wave-generated currents were the only currents that exceeded threshold levels. The wave currents maintained relatively high concentrations of sediment in suspension near the bottom over the inner shelf (< 25 m), and this material (principally silt and clay) was transported offshore by the weak mean flow. Approximately 50% of this material was deposited as the bottom orbital velocities decreased to subthreshold values ( nearly equal 10-15 cm/s). The observed movement of fine sediment across the inner shelf can account for a portion of the mud content of the modern silty sands on the central shelf and on the outer shelf. However, it is clear that the sand fractions, which constitute greater than 70% of the central shelf substrate, must be transported during high-energy winter storms.

California↗

Rippled scour depressions on the inner continental shelf off central California

Side-scan sonar records taken during the recent Coastal Ocean Dynamics Experiment (CODE) show elongate, shore-normal rippled depressions of low relief on the inner continental shelf off central California between Bodega Bay and Point Arena. These features extend up to 2 km from the coast into water depths of up to 65 m. The proposed mechanism for their generation is storm-generated bottom currents associated with coastal downwelling during the late fall and winter which scour the surficial fine-sand sediment and expose the coarser-sand substrate in the depressions. The zones of most intense erosion and the irregular spacing of the features may be controlled by submerged rock ledges and other prominent coastal features. The large straight-crested ripples within the depressions (heights to 40 cm; wavelengths to 1.7 m) are probably formed by large-amplitude, long-period surface waves generated by winter storms.

California↗

Sand waves on an epicontinental shelf: Northern Bering Sea

Sand waves and current ripples occupy the crests and flanks of a series of large linear sand ridges (20 km × 5 km × 10 m high) lying in an open-marine setting in the northern Bering Sea. The sand wave area, which lies west of Seward Peninsula and southeast of Bering Strait, is exposed to the strong continuous flow of coastal water northward toward Bering Strait. A hierarchy of three sizes of superimposed bedforms, all facing northward, was observed in successive cruises in 1976 and 1977. Large sand waves (height 2 m; spacing 200 m) have smaller sand waves (height 1 m; spacing 20 m) lying at a small oblique angle on their stoss slopes. The smaller sand waves in turn have linguoid ripples on their stoss slopes. Repeated studies of the sand wave fields were made both years with high-resolution seismic-reflection profiles, side-scan sonographs, underwater photographs, current-meter stations, vibracores, and suspended-sediment samplers. Comparison of seismic and side-scan data collected along profile lines run both years showed changes in sand wave shape that indicate significant bedload transport within the year. Gouge marks made in sediment by keels of floating ice also showed significantly different patterns each year, further documenting modification to the bottom by sediment transport. During calm sea conditions in 1977, underwater video and camera observations showed formation and active migration of linguoid and straight-crested current ripples. Current speeds 1 m above the bottom were between 20 and 30 cm/s. Maximum current velocities and sand wave migration apparently occur when strong southwesterly winds enhance the steady northerly flow of coastal water. Many cross-stratified sand bodies in the geologic record are interpreted as having formed in a tidal- or storm-dominated setting. This study provides an example of formation and migration of large bedforms by the interaction of storms with strong uniform coastal currents in an open-marine setting.

Marine Geology↗