Search USGS⌕ Search

Geology topics

Daniel O. Hayba

Publications and source records attributed to Daniel O. Hayba.

15 recordsLinked to original sources
USGS2025

Reservoir thermal energy storage pre-assessment for the United States

Storing thermal energy underground for later use in electricity production or direct-use heating/cooling is a promising, viable, and economical green energy option. Reservoir thermal energy storage (RTES) is one such option, which stores energy in underutilized permeable strata with low ambient groundwater flow rates and more geochemically evolved (e.g. brackish/saline) waters relative to overlying principal aquifer systems. The U.S. Geological Survey has begun assessing RTES potential nationally by focusing on five generalized geologic regions (Basin and Range, Coastal Plain, Illinois Basin, Michigan Basin, Pacific Northwest) across the United States. Hydrogeologic reservoir models are developed for the following eight metropolitan area cities within those regions to evaluate RTES performance across different climates and subsurface conditions: Albuquerque, New Mexico; Charleston, South Carolina; Chicago and Decatur, Illinois; Lansing, Michigan; Memphis, Tennessee; Phoenix, Arizona; and Portland, Oregon. Evaluated metrics include estimated required well spacing, thermal storage capacity, and thermal recovery efficiency through time. Also considered for each reservoir are potential complicating factors, including reservoir depth, thermally driven free convection, and groundwater salinity. This work focuses on direct-use cooling because the need for cooling modern office buildings greatly exceeds that for heating in most parts of the country (Falta and others, 2016); however, the evaluated metrics are also relevant to heating and electricity applications. Results indicate that favorable RTES conditions exist in each region, with the Coastal Plain and Basin and Range being especially favorable for thermal storage capacity, while the Pacific Northwest and Michigan Basin excel at energy recovery for the evaluated cooling application. The results underscore the utility of developing maps of thermal storage capacity, subsurface temperature models, and volumetric estimates of thermal storage capacity to serve as key RTES resource classification standards. Overall, this pre-assessment provides a basic understanding of RTES potential in several cities and geologic regions throughout the country and will aid ongoing thermal energy storage assessment efforts.

Arizona, Illinois, Michigan, New Mexico, Oregon, S↗
USGS2015

Geologic assessment of undiscovered oil and gas resources of the U.S. portion of the Michigan Basin

In 2004, the U.S. Geological Survey (USGS) completed an assessment of the undiscovered oil and gas potential of the U.S. portion of the Michigan Basin. For this assessment, the Michigan Basin includes most of the State of Michigan, as well as parts of Illinois, Indiana, Minnesota, Ohio, and Wisconsin. The assessment was based on the geologic elements of each of the six total petroleum systems defined in the basin, including (1) hydrocarbon source rocks (source-rock maturation and hydrocarbon generation and migration), (2) reservoir rocks (sequence stratigraphy and petrophysical properties), and (3) hydrocarbon traps (trap formation and timing). Using this geologic framework, the USGS estimated mean technically recoverable undiscovered continuous and conventional resources that total 990 million barrels of oil, 11.4 trillion cubic feet of natural gas, and 219 million barrels of natural gas liquids. Digital Data Series 69-T (DDS-69-T) is cataloged in the Pubs Warehouse as Data Series 69-T (DS-69-T).

Illinois, Indiana, Michigan, Minnesota, Ohio, Wisc↗
USGS2012

Thermal maturity map of Devonian shale in the Illinois, Michigan, and Appalachian basins of North America

Much of the oil and gas in the Illinois, Michigan, and Appalachian basins of eastern North America is thought to be derived from Devonian shale that is within these basins (for example, Milici and others, 2003; Swezey, 2002, 2008, 2009; Swezey and others, 2005, 2007). As the Devonian strata were buried by younger sediments, the Devonian shale was subjected to great temperature and pressure, and in some areas the shale crossed a thermal maturity threshold and began to generate oil. With increasing burial (increasing temperature and pressure), some of this oil-generating shale crossed another thermal maturity threshold and began to generate natural gas. Knowledge of the thermal maturity of the Devonian shale is therefore useful for predicting the occurrence and the spatial distribution of oil and gas within these three basins. This publication presents a thermal maturity map of Devonian shale in the Illinois, Michigan, and Appalachian basins. The map shows outlines of the three basins (dashed black lines) and an outline of Devonian shale (solid black lines). The basin outlines are compiled from Thomas and others (1989) and Swezey (2008, 2009). The outline of Devonian shale is a compilation from Freeman (1978), Thomas and others (1989), de Witt and others (1993), Dart (1995), Nicholson and others (2004), Dicken and others (2005a,b), and Stoeser and others (2005).

Alabama;Illinois;Indiana;Kentucky;Maryl;Michigan;M↗
USGS2007

Estimating the amount of eroded section in a partially exhumed basin from geophysical well logs: An example from the North Slope

The reconstruction of burial and thermal histories of partially exhumed basins requires an estimation of the amount of erosion that has occurred since the time of maximum burial. We have developed a method for estimating eroded thickness by using porosity-depth trends derived from borehole sonic logs of wells in the Colville Basin of northern Alaska. Porosity-depth functions defined from sonic-porosity logs in wells drilled in minimally eroded parts of the basin provide a baseline for comparison with the porosity-depth trends observed in other wells across the basin. Calculated porosities, based on porosity-depth functions, were fitted to the observed data in each well by varying the amount of section assumed to have been eroded from the top of the sedimentary column. The result is an estimate of denudation at the wellsite since the time of maximum sediment accumulation. Alternative methods of estimating exhumation include fission-track analysis and projection of trendlines through vitrinite-reflectance profiles. In the Colville Basin, the methodology described here provides results generally similar to those from fission-track analysis and vitrinite-reflectance profiles, but with greatly improved spatial resolution relative to the published fission-track data and with improved reliability relative to the vitrinite-reflectance data. In addition, the exhumation estimates derived from sonic-porosity logs are independent of the thermal evolution of the basin, allowing these estimates to be used as independent variables in thermal-history modeling.

Alaska↗
USGS2007

USGS assessment of undiscovered oil and gas resources in Paleogene strata of the U.S. Gulf of Mexico coastal plain and state waters

This report presents a review of the U.S. Geological Survey ( USGS ) 2007 assessment of the undiscovered oil and gas resources in Paleogene strata underlying the U.S. Gulf of Mexico Coastal Plain and state waters. Geochemical, geologic, geophysical, thermal maturation, burial history, and paleontologic studies have been combined with regional cross sections and data from previous USGS petroleum assessments have helped to define the major petroleum systems and assessment units. Accumulations of both conventional oil and gas and continuous coal-bed gas within these petroleum systems have been digitally mapped and evaluated, and undiscovered resources have been assessed following USGS methodology. The primary source intervals for oil and gas in Paleogene (and Cenozoic) reservoirs are coal and shale rich in organic matter within the Wilcox Group (Paleocene-Eocene) and Sparta Formation of the Claiborne Group (Eocene); in addition, Cretaceous and Jurassic source rocks probably have contributed substantial petroleum to Paleogene (and Cenozoic) reservoirs. For the purposes of the assessment, Paleogene strata have divided into the following four stratigraphic study intervals: (1) Wilcox Group (including the Midway Group and the basal Carrizo Sand of the Claiborne Group; Paleocene-Eocene); (2) Claiborne Group (Eocene); (3) Jackson and Vicksburg Groups (Eocene-Oligocene); and (4) the Frio-Anahuac Formations (Oligocene). Recent discoveries of coal-bed gas in Paleocene strata confirm a new petroleum system that was not recognized in previous USGS assessments. In total, 26 conventional Paleogene assessment units are defined. In addition, four Cretaceous-Paleogene continuous (coal-bed gas) assessment units are included in this report. Initial results of the assessment will be released as USGS Fact Sheets (not available at the time of this writing). Comprehensive reports for each assessment unit are planned to be released via the internet and distributed on CD-ROMs within the next year.

U.S. Gulf Coast↗
USGS2003

Sandstone and shale compaction curves derived from sonic and gamma ray logs in offshore wells, North Slope, Alaska– Parameters for basin modeling

Representative compaction curves for the principle lithologies are essential input for reliable models of basin history. Compaction curves influence estimates of maximum burial and erosion. Different compaction curves may produce significantly different thermal histories. Default compaction curves provided by basin modeling packages may or may not be a good proxy for the compaction properties in a given area. Compaction curves in the published literature span a wide range, even within one lithology, e.g., sandstone (see Panel 3). An abundance of geophysical well data for the North Slope, from both government and private sources, provides us with an unusually good opportunity to develop compaction curves for the Cretaceous-Tertiary Brookian sandstones, siltstones, and shales. We examined the sonic and gamma ray logs from 19 offshore wells (see map), where significant erosion is least likely to have occurred. Our data are primarily from the Cretaceous-Tertiary Brookian sequence and are less complete for older sequences. For each well, the fraction of shale (Vsh) at a given depth was estimated from the gamma ray log, and porosity was computed from sonic travel time. By compositing porosities for the near-pure sand (Vsh<1%) and shale (Vsh>99%)from many individual wells we obtained data over sufficient depth intervals to define sandstone and shale 'master' compaction curves. A siltstone curve was defined using the sonic-derived porosities for Vsh values of 50%. These compaction curves generally match most of the sonic porosities with an error of 5% or less. Onshore, the curves are used to estimate the depth of maximum burial at the end of Brookian sedimentation. The depth of sonic-derived porosity profiles is adjusted to give the best match with the 'master' compaction curves. The amount of the depth adjustment is the erosion estimate. Using our compaction curves, erosion estimates on the North Slope range from zero in much of the offshore, to as much as 1500 ft along the coast, and to more than 10,000 ft in the foothills (Panel 3). Compaction curves provide an alternative to vitrinite reflectance for estimating erosion. Vitrinite reflectance data are often very sparse in contrast to well log data and are subject to inconsistencies when measurements are made by different labs. The phenomenon of 'recycling' can also make the reflectance values of dispersed vitrinite problematic for quantifying erosion. Recycling is suspected in dispersed vitrinite in North Slope rocks, particularly in the younger, Cretaceous-Tertiary section. The compaction curves defined here are being integrated into our burial history and thermal models to determine the timing of source rock maturation. An example on Panel 3 shows the results of calculating the maturity of the Shublik Fm. at the Tulaga well using two different sets of shale and siltstone compaction curves. Finally, accurate compaction curves improve a model's ability to realistically simulate the pressure regime during burial, including overpressures.

Alaska↗
USGS2000

Hydrologic budget of the late Oligocene Lake Creede and the evolution of the upper Rio Grande drainage system

The filling history, hydrologic budget, and geomorphic development of ancient Lake Creede and its tributary basin are evaluated to determine the factors that controlled its character. The lake filled the Creede caldera that formed in the late Oligocene as a consequence of the eruption of the Snowshoe Mountain Tuff. The caldera's sedimentary fill accumlated to a depth of about 1.26 km and had a volume of about 89 km 3 . The highest lake level was ~3300 m (10,800 ft) present altitude before it drained eastward across a broad volcanic plateau as the ancestral Rio Grande. A tributary canyon several hundred meters deep was cut into hard rhyolite in the north wall of the caldera before the lake was more than half full; its presence demonstrates that ancient Lake Creede filled slowly and thus occupied a long-lived, closed basin. The slow filling rate is incompatible with the present water flux through the Creede caldera basin, because such a flow would fill the basin geologically instantaneously. This mismatch, together with the recognition that the Oligocene climate was similar to that of today, forces the reexamination of the hydrologic and geomorphic history of the caldera. That appraisal shows that the caldera cannot have resurged rapidly immediately after caldera collapse, and that ancient watershed must have been lass than half as large as the present upper Rio Grande basin. The ancient lake had a more or less constant surface area of about 200 km 2 that approximated a steady-state condition between inflow and evaporation. Although the lake level fluctuated with climatic variations, its surface elevation steadily climbed as sediment accumulated, accelerating as resurgance and dome growth usurped spacewithin the basin. It could have had one playa stage early in its development and another after the basin had nearly filled with sediment, but there is no direct evidence for either. At least the lower half of the sedimentary column (the part sampled by the scientific drilling) formed in an euxinic environment. This argues against a persistent early playa, although evaporative accumulation of brine was inevitable. When the rate of resurgance was rapid relative to sedimentary infilling, the lake would have been deep (i.e., bordered by bedrock rather than sedimentary fans). The geomorphic evolution of the Creede caldera and its watershed tracks a two-phase topographic history, the first the Oligocene through Miocene, and the second for Pliocene to the recent. In Oligocene time, the San Juan volcanic field was a hydrologically immature, gently undulating, and outward sloping, constructional volcanic plateau straddling the ancient Continental Divide. West of the Creede caldera, a dendritic drainage discharged northeastward into ancestral Cebolla Creek (a tributary of the ancestral Gunnison River) through an early stage of the Clear Creek graben in the vicinity of Spring Creek Pass. Miocene basalt choked, but did not reconstruct, the drainage. By the end of Miocene time a mature topography of moderate relief developed, exposing some of the higher ores in the Creede district to weathering. In the late Miocene-early Pliocene time the San Juan Mountains were uplifted and titled eastward; the ancestral Rio Grande was revitalized and cut deeply into the older terrain, excavating much of the accessible sediment from the moat of the Creede caldera and exposing successively lowe levels in the Creede district to oxidation. Simultaneously, the southeast end of the Clear Creek graben was reactivated and breached the southwest wall of the Creede caldera. The rejuvenated Rio Grande captured the formerly northeast-directed headwaters of ancestral Cebolla Creek, shifting more than 1000 km 2 from the Pacific-directed drainage to the Atlantic. The water budget for ancient Lake Creede was strictly limited by the early stages of the fist geomorphic cycle; the modern water budget is the product of the second cycle.

Colorado↗
USGS1997

Multiphase groundwater flow near cooling plutons

We investigate groundwater flow near cooling plutons with a computer program that can model multiphase flow, temperatures up to 1200°C, thermal pressurization, and temperature‐dependent rock properties. A series of experiments examines the effects of host‐rock permeability, size and depth of pluton emplacement, single versus multiple intrusions, the influence of a caprock, and the impact of topographically driven groundwater flow. We also reproduce and evaluate some of the pioneering numerical experiments on flow around plutons. Host‐rock permeability is the principal factor influencing fluid circulation and heat transfer in hydrothermal systems. The hottest and most steam‐rich systems develop where permeability is of the order of 10 −15 m 2 . Temperatures and life spans of systems decrease with increasing permeability. Conduction‐dominated systems, in which permeabilities are ≤10 −16 m 2 , persist longer but exhibit relatively modest increases in near‐surface temperatures relative to ambient conditions. Pluton size, emplacement depth, and initial thermal conditions have less influence on hydrothermal circulation patterns but affect the extent of boiling and duration of hydrothermal systems. Topographically driven groundwater flow can significantly alter hydrothermal circulation; however, a low‐permeability caprock effectively decouples the topographically and density‐driven systems and stabilizes the mixing interface between them thereby defining a likely ore‐forming environment.

Journal of Geophysical Research B: Solid Earth↗
USGS1987

Bibliography and index of the geology of the Creede mining district and vicinity

This bibliography and index of the geology of the Creede mining district and vicinity was prepared in support of the increased number of studies being conducted in conjunction with the proposed deep drilling program at Creede. It was our intent to include in this compilation all papers, abstracts, and maps which contribute any information pertaining to the geology of the Creede district. Thus, references range from papers dealing entirely with Creede to those which contain only a small amount of data relevant to some aspect of Creede geology. Even abstracts of talks, which were later published as papers, are included in an effort to be as complete as possible. We would appreciate any corrections or additions to this bibliography and index.

Open-File Report↗
USGS1983

Comparative anatomy of epithermal precious- and base-metal districts hosted by volcanic rocks: A talk presented at the GAC/MSC/GGU Joint Annual Meeting, May 11-13, 1983, Victoria, British Columbia

In order to distinguish dissimilar from similar features of epithermal districts, lithotectonic, mineralogical and geochemical traits are compiled for 15 such districts. The districts occur in structurally complex settings associated with silicic to intermediate volcanics. Affiliation with subduction environments on a continental scale and caldera settings on a regional scale is common but is not demonstrable for all districts. Most deposits formed near the end of major volcanism, but some formed considerably later. Paleodepth to the top of the ore is 300-600m for most districts, although Au-rich districts appear to be shallower. The lateral extent of the ore zone is highly variable and far exceeds the limited vertical range (300-800m). Most ore was deposited from dominantly meteoric fluids ranging in temperature from 220&deg;-290&deg;C. Salinities ranged from 0-13 wt% NaCl equiv., and typical values were 1-3 wt%. Although noted for eight deposits, boiling is clearly associated with precious-metal deposition in only two deposits. Four districts, typified by Goldfield, Nev., are characterized by a highly sulfidized mineral assemblage, advanced argillic alteration, and ore deposition closely following emplacement of the host rock. The remaining eleven districts highlight a second, discrete type of deposit. They contain adularia, exhibit sericitic &plusmn; argillic alteration, and were mineralized significantly after emplacement of the host rock. The latter category includes two subgroups: Ag- and base-metal-rich deposits (e.g., Creede, Colo.), and Au-rich, base-metal-poor deposits (e.g., Round Mtn., Nev.).

Open-File Report↗