Search USGSSearch

Geology topics

Dale R. Rankin

Publications and source records attributed to Dale R. Rankin.

6 recordsLinked to original sources

Groundwater hydrology and estimation of horizontal groundwater flux from the Rio Grande at selected locations in Albuquerque, New Mexico, 2009–10

The Albuquerque area of New Mexico has two principal sources of water: (1) groundwater from the Santa Fe Group aquifer system, and (2) surface water from the Rio Grande. From 1960 to 2002, pumping from the Santa Fe Group aquifer system caused groundwater levels to decline more than 120 feet while water-level declines along the Rio Grande in Albuquerque were generally less than 40 feet. These differences in water-level declines in the Albuquerque area have resulted in a great deal of interest in quantifying the river-aquifer interaction associated with the Rio Grande. In 2003, the U.S. Geological Survey, in cooperation with the Bureau of Reclamation, acting as fiscal agent for the Middle Rio Grande Endangered Species Collaborative Program, and the U.S. Army Corps of Engineers, began a study to characterize the hydrogeology of the Rio Grande inner valley alluvial aquifer in the Albuquerque area of New Mexico. The study provides hydrologic data in order to enhance the understanding of rates of water leakage from the Rio Grande to the alluvial aquifer, groundwater flow through the aquifer, and discharge of water from the aquifer to riverside drains. The study area extends about 20 miles along the Rio Grande in the Albuquerque area. Piezometers and surface-water gages were installed in paired transects at eight locations. Nested piezometers, completed at various depths in the alluvial aquifer, and surface-water gages, installed in the Rio Grande and riverside drains, were instrumented with pressure transducers. Water-level and water-temperature data were collected from 2009 to 2010. Water levels from the piezometers indicated that groundwater movement was usually away from the river towards the riverside drains. Annual mean horizontal groundwater gradients in the inner valley alluvial aquifer ranged from 0.0024 (I-25 East) to 0.0144 (Pajarito East). The median hydraulic conductivity values of the inner valley alluvial aquifer, determined from slug tests, ranged from 30 feet per day (ft/d) (Montaño) to 120 ft/d (Central) for paired transects, with a median hydraulic conductivity for all transects of 50 ft/d. Daily mean groundwater fluxes from the river through the inner valley alluvial aquifer computed using Darcy’s Law and the slug test results ranged from about 0.01 ft/d (Montaño West) to between 1.0 and 2.0 ft/d (Central East). Median annual groundwater fluxes from the river through the inner valley alluvial aquifer determined using the Suzuki-Stallman method was greatest at Alameda East (0.50 ft/d) and lowest at Alameda West (0.25 ft/d). The results from both methods agreed reasonably well. Seepage investigations conducted by measuring discharge in the east and west riverside drains provided information for computing changes in flow within the drains and for evaluating results from Darcy’s Law and Suzuki-Stallman method flux calculations. Discharge measured in the east riverside drain between the Barelas Bridge and the I-25 bridge indicated that the flow in the east riverside drain increased by an average of 56.5 cubic feet per day per linear foot (ft 3 /d/ft) of drain. Discharge measured in the west riverside drain between the Central bridge and the I-25 bridge indicated that flow increased between west drain miles 0 and 4, an average of 53.8 ft 3 /d/ft of drain, and that flow increased between west drain miles 7 and 10, an average of 44.9 ft 3 /d/ft of drain. In comparison to the seepage measurement results, the groundwater fluxes from the river through the inner valley alluvial aquifer calculated from Darcy’s Law (q slug ) and by the Suzuki-Stallman method (q heat ) would account for 20–36 percent or 53–95 percent, respectively, of the total flow in the east riverside drain and 22–31 percent or 19–26 percent, respectively, of the total flow in the west drain. These results indicate that the drains likely also receive water from outside the inner valley. The spatial variability of horizontal hydraulic gradients and groundwater fluxes can be primarily attributed to variability in the distances between the river and riverside drains throughout the study area and geologic heterogeneities in the alluvial aquifer. Temporal variability in the water levels, which control the horizontal hydraulic gradients and fluxes between the Rio Grande and the riverside drains, can be primarily attributed to seasonal fluctuations in river stage and irrigation practices.

New Mexico

Groundwater hydrology and estimation of horizontal groundwater flux from the Rio Grande at selected locations in Albuquerque, New Mexico, 2003-9

The Albuquerque, New Mexico, area has two principal sources of water: groundwater from the Santa Fe Group aquifer system and surface water from the San Juan-Chama Diversion Project. From 1960 to 2002, groundwater withdrawals from the Santa Fe Group aquifer system have caused water levels to decline more than 120 feet in some places within the Albuquerque area, resulting in a great deal of interest in quantifying the river-aquifer interaction associated with the Rio Grande. In 2003, the U.S. Geological Survey in cooperation with the Bureau of Reclamation, the Middle Rio Grande Endangered Species Collaborative Program, and the U.S. Army Corps of Engineers began a detailed characterization of the hydrogeology of the Rio Grande riparian corridor in the Albuquerque, New Mexico, area to provide hydrologic data and enhance the understanding of rates of water leakage from the Rio Grande to the alluvial aquifer, groundwater flow through the aquifer, and discharge of water from the aquifer to the riverside drains. A simple conceptual model of flow indicates that the groundwater table gently slopes from the Rio Grande towards riverside drains and the outer boundaries of the inner valley. Water infiltrating from the Rio Grande initially moves vertically below the river, but, as flow spreads farther into the Rio Grande inner valley alluvial aquifer, flow becomes primarily horizontal. The slope of the water-table surface may be strongly controlled by the riverside drains and influenced by other more distal hydrologic boundary conditions, such as groundwater withdrawals by wells. Results from 35 slug tests performed in the Rio Grande inner valley alluvial aquifer during January and February 2009 indicate that hydraulic-conductivity values ranged from 5 feet per day to 160 feet per day with a median hydraulic-conductivity for all transects of 40 feet per day. Median annual horizontal hydraulic gradients in the Rio Grande inner valley alluvial aquifer ranged from 0.011 to 0.002. Groundwater fluxes through the alluvial aquifer calculated by using median slug-test results (qm slug ) and Darcy's law ranged from about 0.1 feet per day to about 0.7 feet per day. Groundwater fluxes calculated by using the Suzuki-Stallman method (qm heat ) ranged from 0.52 feet per day to 0.23 feet per day. Results from the Darcy's law and Suzuki-Stallman flux calculations were compared to discharge measured in riverside drains on both sides of the river north of the Montaño Bridge on February 26, 2009. Flow in the Corrales Riverside Drain increased by 1.4 cubic feet per second from mile 2 to mile 4, about 12 cubic feet per day per linear foot of drain. Flow in the Albuquerque Riverside Drain increased by 15 cubic feet per second between drain miles 0 and 3, about 82 cubic feet per day per linear foot of drain. The flux of water from the river to the aquifer was calculated to be 2.2 cubic feet per day per linear foot of river by using the median qm slug of 0.09 feet per day at Montaño transects west of the river. The total flux was calculated to be 6.0 cubic feet per day per linear foot of river by using the mean(qm heat of 0.24 feet per day for the Montaño transects west of the river. Assuming the Corrales Riverside Drain intercepted all of this flow, the qm slug or qm heat fluxes account for 18 to 50 percent, respectively, of the increase of flow in the drain. The flux of water from the river to the aquifer was calculated to be 15 cubic feet per day per linear foot of river by using the median qm slug of 0.30 feet per day at the Montaño transects east of the river. The flux of water from the river to the aquifer was calculated to be 17 cubic feet per day per linear foot of river by using the mean flux calculated from the Suzuki-Stallman method for the Montaño East transects of 0.34 feet per day. Assuming the Albuquerque Riverside Drain intercepted all this flow, the qm slug or (qm heat fluxes would only account for 18 to 21 percent, respectively, of the increase in flow in the drain. The comparison of these results with those of previous investigations suggests that calculated flux through the Rio Grande inner valley alluvial aquifer is strongly scale dependent and that the thickness of aquifer through which river water flows may be greater than indicated by the vertical temperature profiles.

Albuquerque, New Mexico

Water-level data for the Albuquerque Basin and adjacent areas, central New Mexico, period of record through 1999

The Albuquerque Basin, located in central New Mexico, is about 100 miles long and 25 to 40 miles wide. The basin is defined as the extent of consolidated and unconsolidated deposits of Tertiary and Quaternary age that encompass the structural Rio Grande Rift within the basin. Drinking-water supplies throughout the Albuquerque Basin are obtained solely from ground-water resources. An increase in the population of about 35 percent from 1980 to 1990 has resulted in an increased demand for water. From April 1982 through September 1983, a network of wells was established to monitor changes in ground-water levels throughout the Albuquerque Basin. This network consisted of 6 wells with analog-to-digital recorders and 27 wells where water levels were measured monthly. Currently (1999), the network consists of 221 wells and piezometers. U.S. Geological Survey personnel collect water-level measurements at sites 1-88 and sites 165-221. Water-level and other data for sites 89-164 are measured by other agencies and reported to the USGS.

Open-File Report

Water-level data for the Albuquerque Basin and adjacent areas, New Mexico, period of record through 1998

The Albuquerque Basin, located in central New Mexico, is about 100 miles long and 25 to 40 miles wide. The basin is defined as the extent of Cenozoic deposits that encompass the structural Rio Grande Rift within the basin. Drinking-water supplies throughout the Albuquerque Basin are obtained solely from ground- water resources. The population of the basin grew from 419,000 in 1980 to 563,600 in 1990, a 34-percent increase, and resulted in increases in water demand and ground-water pumpage. From April 1982 through September 1983, a network of wells was established to monitor changes in ground-water levels throughout the Albuquerque Basin. Water-level data are currently (1998) collected at 88 wells and piezometers. This report includes water-level data from most of these sites for the period of record through 1998. Data collection at sites 6, 21, 27-29, 31, 35, 56-60, 77, 87, and 88 was interrupted due to construction or limited access, and does not extend through the reporting period. Data are currently collected annually at sites 11 and 56-60; semiannually at sites 1-10, 78, and 85; quarterly at sites 12-55, 67-77, 79, 80, 82-84, 87, and 88; and monthly at sites 61-63, 81, and 86. Water levels are recorded hourly at sites 64-66.

Open-File Report

Hydrologic data for the Puerco River basin, western New Mexico, October 1, 1991, through September 30, 1992

Hydrologic data collected during October 1, 1991, through September 30, 1992, in the Puerco River Basin, Western New Mexico, are summarized. The effects of uranium mining and a 1979 tailings pond spill, in combination with naturally occurring and potentially hazardous trace elements, have created a concern that surface water and ground water in the Puerco River Basin may be unsafe for irrigation, livestock watering, and domestic use; therefore, a data collection network was established to monitor the suitability of the water resources in the Puerco River Basin. The data collection network consisted of one streamflow-gaging station, three water-well dusters, and nine streambed sites. The network is located along a reach of the Puerco River beginning near the confluence of the Puerco River and Pipeline Arroyo and ending approximately 9 miles upstream from the New Mexico-Arizona State line. Data tabulated and presented include mean daily discharge, ground-water hydrographs, water quality, and sediment chemistry and particle-size distribution.

Open-File Report