Search USGS⌕ Search

Geology topics

D.W. Scholl

Publications and source records attributed to D.W. Scholl.

At least 37 records · Page 2Linked to original sources
USGS1987

Evolution and petroleum geology of Amlia and Amukta intra-arc summit basins, Aleutian Ridge

Amlia and Amukta Basins are the largest of many intra-arc basins formed in late Cenozoic time along the crest of the Aleutian Arc. Both basins are grabens filled with 2-5 km of arc-derived sediment. A complex system of normal faults deformed the basinal strata. Although initial deposits of late Micocene age may be non-marine in origin, by early Pliocene time, most of the basinfill consisted of pelagic and hemipelagic debris and terrigenous turbidite deposits derived from wavebase and subaerial erosion of the arc's crestal areas. Late Cenozoic volcanism along the arc commenced during or shortly after initial subsidence and greatly contributed to active deposition in Amlia and Amukta Basins. Two groups of normal faults occur: major boundary faults common to both basins and 'intra-basin' faults that arise primarily from arc-parallel extension of the arc. The most significant boundary fault, Amlia-Amukta fault, is a south-dipping growth fault striking parallel to the trend of the arc. Displacement across this fault forms a large half-graben that is separated into the two depocentres of Amlia and Amukta Basins by the formation of a late Cenozoic volcanic centre, Seguam Island. Faults of the second group reflect regional deformation of the arc and offset the basement floor as well as the overlying basinal section. Intra-basin faults in Amlia Basin are predominantly aligned normal to the trend of the arc, thereby indicating arc-parallel extension. Those in Amukta basin are aligned in multiple orientations and probably indicate a more complex mechanism of faulting. Displacement across intra-basin faults is attributed to tectonic subsidence of the massif, aided by depositional loading within the basins. In addition, most intra-basin faults are listric and are associated with high growth rates. Although, the hydrocarbon potential of Amlia and Amukta Basins is difficult to assess based on existing data, regional considerations imply that an adequate thermal history conducive to hydrocarbon generation has prevailed during the past 6-5 my. The possibility for source rocks existing in the lower sections of the basins is suggested by exposures of middle and upper Miocene carbonaceous mudstone on nearby Atka Island and the implication that euxinic conditions may have prevailed during the initial formation of the basins. Large structures have evolved to trap migrating hydrocarbons, but questions remain concerning the preservation of primary porosity in a sedimentary section rich in reactive volcaniclastic debris. ?? 1987.

Marine and Petroleum Geology↗
USGS1984

Speculations on the petroleum geology of the accretionary body: an example from the central Aleutians

In the 300 km wide Adak-Amlia sector of the central Aleutian Trench ??? 36 000 km3 of offscraped trench fill makes up the wedge-shaped mass of the Aleutian accretionary body. Within this wedge, seismic reflection profiles reveal an abundance of potential hydrocarbon-trapping structures. These structures include antiforms, thrust and normal faults, and stratigraphic pinchouts. Maximum closure on these features is 2 km. In addition, the silt and possibly sand size sediment within the offscraped turbidite deposits, and the porous diatomaceous pelagic deposits interbedded with and at the base of the wedge, may define suitable reservoirs for the entrapment of hydrocarbons. Potential seals for these reservoirs include diagenetically-altered and -produced siliceous and carbonate sediment. The organic carbon input into the central Aleutian Trench, based on carbon analyses of DSDP Legs 18 and 19 core samples, suggests that the average organic carbon content within the accretionary body is approximately 0.3-0.6%. Heat flow across the Aleutian Terrace indicates that at present the oil generation window lies at a depth of 3-6.5 km. At depths of 8 km (which corresponds to the maximum depth the offscraped sediment has been seismically resolved beneath the lower trench slope), the probable high (170-180??C) temperatures prohibit all but gas generation. The dewatering of trench sediment and subducted oceanic crust should produce an abundance of fluids circulating within the accretionary body. These fluids and gases can conduct hydrocarbons to any of the abundant trapping geometries or be lost from the system through sea floor seepage. In the Aleutian accretionary body all the conditions necessary for the formation of oil and gas deposits exist. The size and ultimate preservation of these deposits, however, are dependent on the deformational history of the prism both during accretion and after the accretion process has been superceded by subsequent tectonic regimes. ?? 1984.

Marine and Petroleum Geology↗
USGS1982

Sedimentation and deformation in the Amlia Fracture Zone sector of the Aleutian Trench

A wedge-shaped, landward thickening mass of sedimentary deposits composed chiefly of terrigenous turbidite beds underlies the west-south west-trending Amlia sector (172°20′–173°30′W) of the Aleutian Trench. Pacific oceanic crust dips northward beneath the sector's sedimentary wedge and obliquely underthrusts (30° off normal) the adjacent Aleutian Ridge. The trench floor and subsurface strata dip gently northward toward the base of the inner trench slope. The dip of the trench deposits increases downsection from about 0.2° at the trench floor to as much as 6–7° just above basement. The wedge is typically 2–2.5 km thick, but it is thickest (3.7–4.0 km) near the base of the inner slope overlying the north-trending Amlia Fracture Zone and also east of this structure. Slight undulations and relatively abrupt offsets of the trench floor reflect subsurface and generally west-trending structures within the wedge that are superimposed above ridges and swales in the underlying oceanic basement. The southern or seaward side of some of these structures are bordered by high-angle faults or abrupt flexures. Across these offsets the northern side of the trench floor and underlying wedge is typically upthrown. West-flowing turbidity currents originating along the Alaskan segment of the trench (1200 km to the east) probably formed the greater part of the Amlia wedge during the past 0.5 m.y. The gentle northward or cross-trench inclination of the trench floor and underlying wedge probably reflects regional downbending of the oceanic lithosphere and trench-floor basement faulting and rotation. Much of the undulatory flexuring of the trench wedge can be attributed to differential compaction over buried basement relief. However, abrupt structural offsets attest to basement faulting. Faulting is associated with extensional earthquakes in the upper crust. The west-trending basement offsets are probably normal faults that dip steeply south or antithetic to the north dip of the subducting oceanic crust. Up-to-arc extensional faulting can be attributed to the downbending of the Pacific plate into the Aleutian subduction zone. The rupturing direction and dip is controlled by zones of crustal weakness that parallel north Pacific magnetic anomalies, which were formed south of a late Cretaceous—early Tertiary spreading center (Kula—Pacific Ridge). The strike of these anomalies is fortuitously nearly parallel to the Amlia sector. The up-to-arc fracturing style may locally assist in elevating blocks of trench deposits to form the toe of the trench's landward slope, which is in part underlain by a compressionally thickened accretionary mass of older trench deposits. Compressional structures that can be related to underthrusting are only indistinctly recorded in the turbidite wedge that underlies the trench floor.

Alaska↗
USGS1980

Sedimentary masses and concepts about tectonic processes at underthrust ocean margins

Tectonic processes associated with subduction of oceanic crust, but unrelated to the collision of thick crustal masses or microplates, are presumed by many geologists to significantly affect the formation and deformation of large sedimentary bodies at underthrust ocean margins. More geologists are familiar with the concept of subduction accretion , which describes the tectonic attachment of rock and sediment masses to the margin's bedrock framework, than with other noncollision processes—for example, sediment subduction, subduction erosion , and subduction kneading . These are equally important processes controlling the geologic evolution of underthrust margins, and any one of them may predominate at a given place.

Geology↗
USGS1979

Resource report for the deep-water areas of proposed OCS lease sale No. 70, St. George Basin, Alaska

This report summarizes geological and geophysical data from the deep-water (greater than 200m) region of the St. George Basin lease sale area #70. The shallow-water region is discussed in detail by Marlow and others (1979a) in a companion report. The triangular deep-water region lies at the junction of the Bering shelf and the Aleutian Ridge (Fig. 2). This region is bounded on the northeast by the 200 m bathymetric contour that defines the edge of the Bering shelf, on the southeast by a meandering line that lies 3 miles north of the Aleutian Islands, and on the west by the 171°W longitude meridian. Hereafter, this triangular region is referred to as the Umnak Plateau region. The name is derived from a major bathymetric feature, Umnak Plateau, that covers most of the region.

Alaska↗
USGS1978

Episodes of Aleutian Ridge explosive volcanism

Earlier workers have overlooked deep-sea bentonite beds when unraveling the Cenozoic volcanic history of an area. In the North Pacific, identification of Miocene and older volcanic episodes is possible only if both altered (bentonite) and unaltered ash beds are recognized. Our study, which includes bentonite beds, shows that volcanism on the Aleutian Ridge and Kamchatka Peninsula has been cyclic. Volcanic activity seems to have increased every 2.5 × 10 6 years for the past 10 × 10 6 years and every 5.0 × 10 6 years for the time span from 10 to 20 × 10 6 years ago. The middle and late Miocene and the Quaternary were times of greatly increased volcanic activity in the North Pacific and elsewhere around the Pacific Basin. The apparent absence of a volcanic record before the late Miocene at Deep Sea Drilling Project site 192 is the result not of plate motion, as suggested by Stewart and by Ninkovich and Donn, but rather of the diagenesis of ash layers. Major, apparently global volcanic episodes occurred at least twice in the last 20 × 10 6 years. Yet, only one major glacial epoch (the Pleistocene) has occurred. Therefore, even though glaciation coincided with an increase in Quaternary volcanism, the increased volcanism itself may not have been the primary cause of global cooling.

Alaska↗
USGS1970

The structure and origin of the large submarine canyons of the Bering Sea

Three exceptionally large and long submarine canyons — Bering, Pribilof, and Zhemchug — incise the continental slope underlying the southeastern Bering Sea. Bering Canyon, the world's longest known slope valley, is approximately 400 km long and has a volume of 4,300 km 3 . The volume of Pribilof Canyon is 1,300 km 3 and that of Zhemchug is 8,500 km 3 ; Zhemchug Canyon may well be the world's largest slope valley; most other large submarine canyons have volumes less than 500 km 3 . Pribilof and Zhemchug canyons are further distinguished by the headward bifurcation of their slope axes to form elongated trough-shaped basins behind the regionally projected position of the shelf edge. These troughs are superimposed over structural depressions formed by down-faulted basement rocks of Mesozoic and older ages. Prior to canyon cutting these depressions were filled with as much as 2,600 m of shallow-water diatomaceous, tuffaceous, and detrital sediments largely of Tertiary age. Deposition of these sediments took place concurrently with general margin subsidence of at least 2,000 m. The data and conclusions presented in this paper stress that the location, trend, and shape of the enormous submarine canyons cutting the Bering margin are structurally determined. However, axial cutting and headward erosion within the relatively unconsolidated Tertiary strata and the older, lithified basement rock is thought to have been caused by basinward-sliding masses of sediment; these unstable sediment bodies accumulated on the upper continental slope and outer shelf, probably near the mouths of major Alaskan rivers. Bering Canyon was periodically cut and filled by axial sedimentation during Late Tertiary and Quaternary time. Pribilof and Zhemchug canyons, however, are thought to have been excavated entirely during the Pleistocene. It is presumed that, during one or more periods of glacially lowered sea level, the Kuskokwim and Yukon rivers emptied into or near the heads of Pribilof and Zhemchug canyons. The enormous size and unusual shape of Zhemchug Canyon resulted from the breaching of the seaward wall of an outer-shelf basement depression and the subsequent removal of nearly 4,500 km 3 of Tertiary deposits filling it.

Alaska↗
USGS1970

Buldir Depression - A Late Tertiary graben on the Aleutian Ridge, Alaska

Buldir Depression is a large, rectilinear basin that lies on the northern edge of the Aleutian Ridge and is aligned with the arcuate chain of active volcanoes on the ridge crest. The depression appears to be a volcanic-tectonic feature, which began to form in Late Tertiary time and which is still forming. It is a graben formed by extensional rifting and accompanied by contemporaneous volcanism on the Aleutian Ridge. Subsidence rates for the depression are estimated at 20–70 cm/1,000 years. Sediments in the depression are 300 m thick and are probably pelagic and turbidite deposits of Pleistocene age. The turbidites were apparently derived from the plateau area of the Aleutian Ridge surrounding the depression. Older sediments on the northern slope of the Aleutian Ridge have a maximum thickness of 550 m and are deformed and slumped toward the Bering Sea. These sediments are postulated to overlie a mid-flank terrace on the northern Aleutian Ridge that titled to the north during the formation of Buldir Depression.

Alaska↗
USGS1969

Florida submergence curve revised: Its relation to coastal sedimentation rates

New data substantiate as well as modify the south Florida submergence curve, which indicates that eustatic sea level has risen continuously, although at a generally decreasing rate, during the last 6500 to 7000 sidereal years (5500 standard radiocarbon years) to reach its present position. Accumulation rates of coastal deposits are similar to the rate of sea-level rise, thus supporting the generalization that submergence rates largely determine as well as limit rates of coastal sedimentation in lagoonal and estuarine areas.

Florida↗